How to do order status should be completed even with partial delivery?

Hi,
My requirement is i have sales order for 5 units.
Delivery will be done for 3 units.
I need the sales order status to be completed after delivery.
I have tried with completion rule in item catagery'Item is completed with first reference'
Still the status in document flow is order 'being processed'
Can any body help me out
regards,
Reddyy

Hi Reddy
If your requirement has to be fulfilled then assign reason for rejection at item level for all line items after doing delivery .Then the item will be closed with 3pcs only .And when you check the document flow then the sales order will be closed
NOTE : No need to change the completion rule at the item category level
Regards
Srinath

Similar Messages

Internal Sales order Status should remain Entered

Internal Sales order Status should remain Entered.
Here it is automatically getting BOOKED
1) I have created one PR -100
2) Approved it
3) Ran create internal orders
4) Login as Order Management responsibility.
5) Import orders
6) Searched for the ISO -200.
7) It’s status is in BOOKED
We want the status of Internal sales order to remain = Entered.
So that changes can be made to the sales order.
Is there any profile options?

Hello,
I realize this is an old thread but it is exactly what I have encountered.
I am able to import an internal Sales Order with a Status of Entered. However, I need to import these orders with a Status of Booked (we have no process for Booking Internal Sales Orders).
We are on 11.5.10.2 EBS on 10.2.0.4 DB.
We have multiple inventory orgs but we have only processed Internal order between two of them P Org to F Org. those internal Sales orders are imported with a Status of Booked.
However we need to have Internal Sales Order from P Org to N Org. When I import these internal Sales Orders they import with a Status of Entered.
As it works as expected in one Org but not the other, I believe it must be a Org setup issue.
Any suggestions on where to look?

How can I order 2 or 3 different cards with iPhoto ?

How can I order 2 or 3 different cards with iPhoto ?

See this document on the details for shipping of Apple print products:
http://store.apple.com/us/help/print_products
There is no way to combine orders for different products into one.

I got recently the temperature warning and now my iphohe wont charge up completly even with a full night recharge

i got recently the temperature warning and now my iphohe wont charge up completly even with a full night recharge

Not Charge
- See:
iPod touch: Hardware troubleshooting
iPhone and iPod touch: Charging the battery
- Try another cable.
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic. I suspect this is your problem
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

PM order status remains as PCNF even after completion confirmation & TECO

Hi,
For some of the PM orders we created, the order status is till in PCNF and operation status in MCNF.
We have done the following also
1) Completion confirmation done for all operations
2) "Fincal confirmation" and "No remaining work" tabs checked for all operation confirmations
3) TECO is done
But still the operations are in mCNF-Manual confirmation status and hence the order is is in PCNF.
Please let me know how to change the order status from PCNF to CNF.

Please check any Sub operation confirmation is pending or ? if so please do ( IW41 )
Riyaj
Edited by: riyajmaner on Feb 24, 2012 5:08 PM

Sale order status not getting completed

Hi Friends,
I had sales order with milestone billing for which I completed billing, even though sale order status is showing as being processed. The same way with periodic billing also.
Kindly suggest.
Kumar

Dear all,
I have cleared my actual issue. But the below doubt was regarding the standard SAP.
Hi All,
Thank you for your answers. First point is that I hope completion rule is only for quotation and contracts but not for normal sales orders. Second point is that I am using TAO item category which tells order related billing with billing plan. This means there was no delivery, then why schedule line CP (MRP) was assigned to TAO in standard? This is the problem for me. As the schedule line is MRP the system is not completing the status of the sale order even I have completed total quantity and value also. Can anyone tell me why this was assigned like this in statandard?
Kumar

Order status is coming "Being Processed" after return delivery

Helloo Experts,
We have a current situation here, Where order type (OR) with item cat (TAN) creates SO then delievry (LF) happened and PGI..
Due to some reasons the order needs to be void.Then the SO has been changed (VA02) by adding item cat YREN with same quantity, then delivery (LF) ,PGR and billing (F2).
Now after final billing the order status coming as "Being processed" instead of "Closed" at the document flow.
Does SAP standard practice supports this process flow OR it should be Return order (RE),Delivery (LR) and return of credit (RE) to make the Order status "Completed".
Is there any other ways to make these order's status changed from "Being Processed" to "Completed"
Waiting for some valuable inputs.
Thanks
SM

Then the SO has been changed (VA02) by adding item cat YREN
with same quantity, then delivery (LF) ,PGR and billing (F2).
This process is wrong. You have to create a new return sale order with reference to the parent billing document. If billing has not been generated, then you have to reverse the delivery via VL09.
G. Lakshmipathi

Combining 2 Sales Orders - 'Complete' with 'Partial' Delivery into 1 Delv

Hi folks,
I have a typical requirement from my client and it is as follows:
My client want to combine 'Sales Orders' marked with 'Complete Delivery' indicator(VBAK-AUTLF check-box is checked) at the Header -> Shipping, with Sales Orders marked for 'Partial Delivery' (VBAK-AUTLF is not checked) in the Header-> Shipping.
Although all the other business conditions/fields values at the Header levels,like Ship-To_party, Shipping Conditions, Incoterms, etc. are same across both these Sales Orders; SAP as a standard Business Process Flow, doesnot allow COMBINING of 2 such orders into a SINGLE Delivery, since their 'Headers' seem to differ for that ONE field value.
I have searched through all user-exits, SAP Help forums as well as OSS notes to get a solution to this problem but could not find any (bad luck).
Will anyone of you who has come across this particular scenario or know a way to get around this problem, be able to contribute with his/her ideas? I would be
grateful, thanks in advance.
Regards,
Shripad

Hi iim nava,
Thanks for your reply.
However in our case, the system does throw that error, when i try to combine the second order (partial) into the delivery created for the first order (complete).Here is the log for your reference, when I try to add the second(partial so items) into the delivery created for the first (complete delivery SO):
Diagnosis
 Item 000010 cannot be shipped in the same delivery with the
 other items in the document because the header data (AUTLF)
 is different. The field AUTLF for the item has the value &4,
 yet in the delivery it has X.
System Response
 The system issues this message if a delivery split is
 necessary.
 This message either appears in the collective processing log
 or during creation of outbound deliveries from projects or
 for subcontracting. It informs you that the item specified
 will be shipped in a delivery other than the delivery that
 includes the other items from the same document. If there was
 a general problem with shipment of the delivery, a different
 message appears.
 If this message appears when you are creating an outbound
 delivery with reference to a sales order in the foreground,
 it indicates that the order item cannot be shipped with the
 current outbound delivery.
By any chance, did you actually try simulating my scenario in your system. If you have and the same works fine in your system, then pls help me by sending your 'copy control' settings, to help me compare. We run SAP 4.6 and my settings for copy control are as follows:
LF <-> OR (Header):
 Data Transfer (VBAK) = 001 [HEADER]
 Data Transfer HU = 000 [blank]
 Order Requirements (VBAK) = 001 [HEADER]
 Combination Requirements = 651 [051 w/o Comp dlv]
LF <-> OR <-> TAN (Item):
 Item Data = 101 [ITEM]
 Order Requirements (VBAK) = 101 [ITEM]
 Business Data = 2 [BUSINESS DATA]
 Buss Data Reqmt = 151 [COMBINATION]
Hope the feedback can you will help me solve my problem. Thanks once again.
Regards,
Shripad

How do I set phone to be COMPLETELY silent with NO vibrate?

I used the volume button on the upper left side of the phone and turn it all the way to silent. I also went to settings/sound and set it on vibrate OFF. I also tried setting the Ringer and Alerts section - Change with Buttons both On and Off. However, my phone will still make text sounds when I receive texts and notifications from Facebook. I can not figure out why it won't go completely silent with no vibrate. Can anyone help me out here, please?

Email alerts are actually different with the one that you have set.

Invoice status is "Closed" after posting from Partial Delivery Notes

Hi everyone,
My add-on posts PARTIAL draft documents to posted delivery notes without reference to a Sales Order up to invoices. I've noticed that after invoice posting, my document (invoice) status was closed while my delivery notes document is open. Should'nt my invoice status still open? Please tell me if I am missing something on my code below. Thanks in advance!
public SAPbobsCOM.Documents PostDeliveryReceipts(SAPbobsCOM.Company company, SAPbobsCOM.Documents draft, ref int result)
SAPbobsCOM.Documents delivery = (SAPbobsCOM.Documents)company.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oDeliveryNotes);
delivery.HandWritten = SAPbobsCOM.BoYesNoEnum.tYES;
delivery.DocDate = draft.ShipmentDate;
 delivery.DocDueDate = draft.ShipmentDate;
 delivery.CardCode = draft.CardCode;
 delivery.CardName = draft.CardName;
 delivery.NumAtCard = draft.NumAtCard;
 delivery.DocType = SAPbobsCOM.BoDocumentTypes.dDocument_Items;
for (int i = 0; i <= draft.Lines.Count - 1; i++)
 draft.Lines.SetCurrentLine(i);
 //components of a bom
 if (draft.Lines.TreeType != SAPbobsCOM.BoItemTreeTypes.iIngredient)
delivery.Lines.ItemCode = draft.Lines.ItemCode;
 delivery.Lines.Quantity = draft.Lines.Quantity;
 delivery.Lines.WarehouseCode = draft.Lines.WarehouseCode;
 delivery.Lines.VatGroup = draft.Lines.VatGroup;
 delivery.Lines.UnitPrice = draft.Lines.UnitPrice;
 if (i != draft.Lines.Count)
 delivery.Lines.Add();
return delivery;

hello, friend.
in addition to what the others have said, please check your customer master, particularly in the Sales Area Data > Shipping tab. look at the partial deliveries. there may have been settings that tell the system if a delivery has been created with reference to the sales order, the order will be completed even if the quantity is only partially delivered. if the entry in the 'partial delivery per item' field is 'B', then this will explain your situation.
this can also be manually set in the sales order, so you have to take a look at the order as well, at item level.
regards.

SCSM 2012 - service requests auto complete even with activities in them

I introduced SCSM 2012 on Monday at out company. I have a number of service requests templates that the service desk use.
I have seen a major fault. Occasionally when a request is raised from the template the goes straight to complete and therefore the manual activities are stuck in pending and i have to kill the activities using a powershell script. Below is a screen shot
showing an example.
THis was raised from a template the service desk use frequently. The template is ok because we have used it several times. In the example below service desk raised the template - as ever when you raise a request the system moves it from 'new' to 'In Progress'
- which is fine you should expect this - but then it automatically moves it from 'In Progress to 'Complete' - this is without the activity being completed. The activity is then stuck in pending. No one is marking the request as complete, the system is doing
it - but why??????? there are no workflows set up at all for Service Requests

Hi CCOTS-KN
You can actually quite easily test this.
Create an SR from a template that has 3 Manual Activities. Once created it will progress through the 'Submitted' status to the 'In Progress' status. The first Manual Activity should also be 'In Progress'. Now complete the first Manual Activity,
then wait for the second Manual Activity to go to the 'In Progress' status. Now, put the SR 'On Hold'. Wait for a couple of minutes - until the 2nd and 3rd Manual Activities are paused. Now resume the SR. What should happen is that
the Manual Activity resume workflow should trigger before other workflows, resulting in the SR and the Manual Activities remaining 'In Progress'. If the issue is not fixed, the completion workflow will trigger first resulting in a completed SR with paused
activities.
HTH
Cheers
Shaun

Stock transport order getting closed with partial delivery

I have a problem here .Stock transport Order gets automatically created in SAP ( by means of inbound IDOC).
Suppose the STO Quanity is 10 pcs and delivery note is of just 5 PCS.
The STO Purchase Quanity changes to delivery note Quanity i.e 5 pcs and changes the status of the STO to close .
Delivery note also gets created automatically by incoming IDOC.
I think this is a problem with some custom program logic which processes the delivery note for the STO,
Anyone who has faced this scenario before , pls help whether this is SAP standard ??????

I am not sure because what happens is if order quanity is 10 pcs and delivery note is 5 pcs , the PO order Qty changes to 5 pcs and gets closed,
I think this is not SAP standard and hence it could be related to some ABAP Program behind.
Please clarify.

How Goods Issu happens in the Stock transfer process with outbound delivery

Hi,
Can you please explain me how the goods issue happens in the Stock transfer scenario with outbound delivery?
can we use VL02n for goods issue for single delivery doc(Delivery type-RL).
Can we use the transaction VL23 for collective processing of goods issue for stock transfers.
Thanks

Hi Anil,
->You can use VL02N transaction to do PGI for the outbound delivery in the Stock transfer scenario.
-->But you have mentioned that delivery type is RL -is this returns delivery
Normally NL delivery will be used in STO(Rplenishment
delivery)
-->You can use VL06G transaction for collective PGI
The transaction VL23 for delivery schdule in the back ground
I hope it will help you,
Regards,
Murali.

How to return order status and the status of the next order

Greetings,
I cannot use the LEAD function.
How do i simulate this in Oracle 8i PE.
I have a table of orders and for each grouping of orders i need the current status and the next status.
Any suggestions?
Thanks,
Craig.

Something like:
SELECT i.order_id, i.item, i.status
MAX(i2.status) next_status
FROM incidents i, incidents i2
WHERE i.order_id = i2.order_id(+)
AND i.order_id < i2.order+id (+)
GROUP BY i.order_id, i.item, i.status
ORDER BY i.order_id
Greetings,
I cannot use the LEAD function.
How do i simulate this in Oracle 8i PE.
I have a table of orders and for each grouping of orders i need the current status and the next status.
Any suggestions?
Thanks,
Craig.

How to get order status from co03

Hello Gurus,
Please tell me is there any fuction module available to get status of order from CO03
or any link that will help to get status...
Thanking you,
Gaurav

Hi Gaurav,
I checked few function module.And found few you can have a look at them.
CO_61_ORDER_STATUS_CHECK
CO_OCM_ORDER_STATUS_CHECK
CY_ORDER_STATUS_CHANGE
ORDER_STATUS_DETERMINE
STATUS_TEXT_EDI and look for OBJNR.
Hope your query resolves soon.
Have a best day ahead.

How to do order status should be completed even with partial delivery?

Similar Messages

Maybe you are looking for