How to establish user equvalance between 2 rac nodes on non default ports??

Hi Friends,
Please shed some light on how to establish user equvalance between 2 rac nodes on non default ports such as ssh on 22...
i want to establish user equvalance on other ports..
Thanks
RB

R12DBA wrote:
Hi Friends,
Please shed some light on how to establish user equvalance between 2 rac nodes on non default ports such as ssh on 22...
i want to establish user equvalance on other ports..
Thanks
RBHi RB ,
22 is default port for ssh. For configuring
http://yasarmoran.wordpress.com/2010/06/12/configuring-ssh-on-oracle-rac-nodes/
For non default port , first of all you need to configure ssh on new port . For that refer :
http://www.itworld.com/nls_unixssh0500506

Similar Messages

How to establish the connection between crm and r/3

Hi,
Sorry for posting this question in this forum, i did not find any CRM forums.My question is,How to establish the connection between CRM and R/3...in my office i installed standard alone CRM system,but it is not talking to R/3.
Could any one tell me where to find adapters and plugins for this.
Thanks in advance.
Ajey

Hello Ajey,
in the case you mean the connection between R/3 and SAP CRM you should read the Best Practice Guides:
B01: CRM Generation
C71: CRM Connectivity
B09: CRM Replication
from http://help.sap.com/bp_crmv240/index.htm. There is a CRM Forum at http://www.sap.com/community/ and also at http://www.sapfans.com/.
Regards
Gregor

How to use non default port 1521 while 11.2.0.1 grid upgrade to 11.2.0.2

Hi Team ,
We are planning 11.2.0.1 Grid infra rolling upgrade to 11.2.0.2 with out any downtime.
But while up gradation due to default scan port 1521 , 11.2.0.1 databases are not able to connect (remote connections)
We are using 1900 port for existing 11.2.0.1 grid infra scan.
While up gradation it is taking default port of 1521 insted of existing port 1900.
Please provide the solution to use non default port while 11.2.0.2 up gradation.
After upgrade the status as below.
grdoratst104:/apps/grid/grdhome:+ASM4> srvctl config scan_listener
SCAN Listener LISTENER_SCAN1 exists. Port: TCP:1521
SCAN Listener LISTENER_SCAN2 exists. Port: TCP:1521
SCAN Listener LISTENER_SCAN3 exists. Port: TCP:1521
Here I was getting TNS:no Listener errors from the client connections.
I have modifyed the scan port then it is working fine.
grdoratst104:/apps/grid/grdhome:+ASM4> srvctl modify scan_listener -p TCP:1800
grdoratst104:/apps/grid/grdhome:+ASM4> srvctl config scan_listener
SCAN Listener LISTENER_SCAN1 exists. Port: TCP:1800
SCAN Listener LISTENER_SCAN2 exists. Port: TCP:1800
SCAN Listener LISTENER_SCAN3 exists. Port: TCP:1800
grdoratst104:/apps/grid/grdhome:+ASM4>
Here the problem is we need to do the grid infra upgrade with out downtime,but due this default port issue clients are not able to connect to the database.
Thanks
Bala
Edited by: user12032334 on May 31, 2011 11:46 AM

Why are you using a non default port? It does not improve security. It makes network management more complex. And causes the type of issues that you are facing now.
So before changing defaults, make sure that your reasons are technically sound. And using port 1900 when 1521 is available, is not technically sound by any means.
As for addressing the problem you have created for yourself by mucking around with port numbers. Use a NAT firewall (on each RAC node) to rewrite packets headers received on port 1900 and send these to the server's port 1521 instead (on the VIP or static IP as required).
This can be fairly easily done using iptables if your o/s is Linux. You need to:
a) create a pre-routing NAT rule
b) create a post-routing NAT rule
c) create a forwarding filter rule for port 1900/tcp
d) create an input filter rule to accept traffic on 1900/tcp

How to restore (not duplicate) DB from RAC ASM to non ASM

Hello everybody,
i am trying to recover db from RAC+ASM to non ASM no RAC node. I am running Oracle 10g (10.2.0.4) on Win2003 Server. I have functional backup from my prod system.
Here are my steps:
*1. On prod server i make backup running this script in RMAN*
configure channel device type 'SBT_TAPE' parms'SBT_LIBRARY=oracle.disksbt,ENV=(BACKUP_DIR=e:\backup)';
RUN {
backup device type SBT_TAPE database tag zal20081129;
SQL 'alter system archive log current';
backup device type SBT_TAPE archivelog ALL tag zal20081129;
*2. I prepared clon instance on another server (The same Oracle version) and start it to nomount mode.*
*3. I copied the backup from prod server to clon server to exactly the same path. (e:\backup)*
*4. I connect to RMAN on my new node and I use the DBID parameter and I restore controlfile.*
rman
connect target /
set DBID 3079749916
startup nomount
run {
allocate CHANNEL CTAPE DEVICE TYPE 'SBT_TAPE' PARMS'SBT_LIBRARY=oracle.disksbt,ENV=(BACKUP_DIR=f:\backup)';
allocate channel CDISK DEVICE TYPE DISK;
restore controlfile from 'f:\backup\78k91lrn_1_1';
alter database mount;
*5.Then I check the backup, crosscheck etc.*
List of Backup Sets
===================
BS Key Type LV Size Device Type Elapsed Time Completion Time
169 Full 42.78G SBT_TAPE 01:12:54 04-MAR-09
BP Key: 169 Status: AVAILABLE Compressed: NO Tag: DATAFILES
Handle: 75k91hcj_1_1 Media:
List of Datafiles in backup set 169
File LV Type Ckp SCN Ckp Time Name
1 Full 928460863 04-MAR-09 +DATA/agost/datafile/system.272.668509367
2 Full 928460863 04-MAR-09 +DATA/agost/datafile/undotbs1.273.668509387
3 Full 928460863 04-MAR-09 +DATA/agost/datafile/sysaux.263.668509393
4 Full 928460863 04-MAR-09 +DATA/agost/datafile/ifsapp_archive_data.298.668509401
5 Full 928460863 04-MAR-09 +DATA/agost/datafile/ifsapp_archive_index.258.668509401
6 Full 928460863 04-MAR-09 +DATA/agost/datafile/ifsapp_blob.259.668509401
7 Full 928460863 04-MAR-09 +DATA/agost/datafile/ifsapp_data.274.668509405
8 Full 928460863 04-MAR-09 +DATA/agost/datafile/ifsapp_index.275.668509533
9 Full 928460863 04-MAR-09 +DATA/agost/datafile/ifsapp_report_data.260.668509661
10 Full 928460863 04-MAR-09 +DATA/agost/datafile/ifsapp_report_index.261.668509661
12 Full 928460863 04-MAR-09 +DATA/agost/datafile/undotbs2.264.668509661
13 Full 928460863 04-MAR-09 +DATA/agost/datafile/users.265.668509667
14 Full 928460863 04-MAR-09 +DATA/agost/datafile/ifsapp_index.270.668510837
15 Full 928460863 04-MAR-09 +DATA/agost/datafile/ifsapp_index.299.668510843
16 Full 928460863 04-MAR-09 +DATA/agost/datafile/ifsapp_data.300.668510859
17 Full 928460863 04-MAR-09 +DATA/agost/datafile/ifsapp_data.301.668510865
BS Key Size Device Type Elapsed Time Completion Time
171 1.98G SBT_TAPE 00:02:54 04-MAR-09
BP Key: 171 Status: AVAILABLE Compressed: NO Tag: ARCHIVE_LOGS
Handle: 77k91lm2_1_1 Media:
List of Archived Logs in backup set 171
Thrd Seq Low SCN Low Time Next SCN Next Time
1 790 927018133 03-MAR-09 927379509 03-MAR-09
1 791 927379509 03-MAR-09 927635333 03-MAR-09
1 792 927635333 03-MAR-09 927804715 03-MAR-09
1 793 927804715 03-MAR-09 928438198 04-MAR-09
1 794 928438198 04-MAR-09 928496353 04-MAR-09
1 795 928496353 04-MAR-09 928496667 04-MAR-09
2 941 927018173 03-MAR-09 927414357 03-MAR-09
2 942 927414357 03-MAR-09 927725821 03-MAR-09
2 943 927725821 03-MAR-09 927747874 03-MAR-09
2 944 927747874 03-MAR-09 927804436 03-MAR-09
2 945 927804436 03-MAR-09 928375778 03-MAR-09
2 946 928375778 03-MAR-09 928460503 04-MAR-09
2 947 928460503 04-MAR-09 928496341 04-MAR-09
2 948 928496341 04-MAR-09 928496660 04-MAR-09
*6. Then I run this script to restore and recover db.*
run {
SET UNTIL SEQUENCE 795 THREAD 1;
SET UNTIL SEQUENCE 948 THREAD 2;
restore database;
switch datafile all;
recover database;
*7. Everything goes well see under.*
RMAN> 2> 3> 4> 5> 6> 7>
executing command: SET until clause
executing command: SET until clause
Starting restore at 04-MAR-09
using channel ORA_DISK_1
using channel ORA_SBT_TAPE_1
channel ORA_SBT_TAPE_1: starting datafile backupset restore
channel ORA_SBT_TAPE_1: specifying datafile(s) to restore from backup set
restoring datafile 00001 to +DATA/agost/datafile/system.272.668509367
restoring datafile 00002 to +DATA/agost/datafile/undotbs1.273.668509387
restoring datafile 00003 to +DATA/agost/datafile/sysaux.263.668509393
restoring datafile 00004 to +DATA/agost/datafile/ifsapp_archive_data.298.668509401
restoring datafile 00005 to +DATA/agost/datafile/ifsapp_archive_index.258.668509401
restoring datafile 00006 to +DATA/agost/datafile/ifsapp_blob.259.668509401
restoring datafile 00007 to +DATA/agost/datafile/ifsapp_data.274.668509405
restoring datafile 00008 to +DATA/agost/datafile/ifsapp_index.275.668509533
restoring datafile 00009 to +DATA/agost/datafile/ifsapp_report_data.260.668509661
restoring datafile 00010 to +DATA/agost/datafile/ifsapp_report_index.261.668509661
restoring datafile 00012 to +DATA/agost/datafile/undotbs2.264.668509661
restoring datafile 00013 to +DATA/agost/datafile/users.265.668509667
restoring datafile 00014 to +DATA/agost/datafile/ifsapp_index.270.668510837
restoring datafile 00015 to +DATA/agost/datafile/ifsapp_index.299.668510843
restoring datafile 00016 to +DATA/agost/datafile/ifsapp_data.300.668510859
restoring datafile 00017 to +DATA/agost/datafile/ifsapp_data.301.668510865
channel ORA_SBT_TAPE_1: reading from backup piece 75k91hcj_1_1
channel ORA_SBT_TAPE_1: restored backup piece 1
piece handle=75k91hcj_1_1 tag=DATAFILES
channel ORA_SBT_TAPE_1: restore complete, elapsed time: 01:25:12
Finished restore at 04-MAR-09
Starting recover at 04-MAR-09
using channel ORA_DISK_1
using channel ORA_SBT_TAPE_1
starting media recovery
channel ORA_SBT_TAPE_1: starting archive log restore to default destination
channel ORA_SBT_TAPE_1: restoring archive log
archive log thread=1 sequence=794
channel ORA_SBT_TAPE_1: restoring archive log
archive log thread=2 sequence=947
channel ORA_SBT_TAPE_1: reading from backup piece 77k91lm2_1_1
channel ORA_SBT_TAPE_1: restored backup piece 1
piece handle=77k91lm2_1_1 tag=ARCHIVE_LOGS
channel ORA_SBT_TAPE_1: restore complete, elapsed time: 00:02:26
archive log filename=E:\ORADATA\AGOST\FLASHBACK\AGOST\ARCHIVELOG\2009_03_04\O1_MF_1_794_4TX5D7RD_.ARC thread=1 sequence=794
archive log filename=E:\ORADATA\AGOST\FLASHBACK\AGOST\ARCHIVELOG\2009_03_04\O1_MF_2_947_4TX5D7OY_.ARC thread=2 sequence=947
channel default: deleting archive log(s)
archive log filename=E:\ORADATA\AGOST\FLASHBACK\AGOST\ARCHIVELOG\2009_03_04\O1_MF_2_947_4TX5D7OY_.ARC recid=1563 stamp=680629925
channel default: deleting archive log(s)
archive log filename=E:\ORADATA\AGOST\FLASHBACK\AGOST\ARCHIVELOG\2009_03_04\O1_MF_1_794_4TX5D7RD_.ARC recid=1562 stamp=680629925
media recovery complete, elapsed time: 00:00:13
Finished recover at 04-MAR-09
*8. Then when i want to open database*
using command 'Alter system open resetlogs;' I got this error:
RMAN>
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of alter db command at 03/05/2009 07:26:03
RMAN-06003: ORACLE error from target database:
ORA-00600: internal error code, arguments: [kgeade_is_0], [|http://forums.oracle.com/forums/], [], [|http://forums.oracle.com/forums/], [], [|http://forums.oracle.com/forums/], [], [|http://forums.oracle.com/forums/]
In the alert log I have got this error: (for every log group)
ORA-00313: open failed for members of log group 4 of thread 2
ORA-00312: online log 4 thread 2: '+FLASHBACK/agost/onlinelog/group_4.260.668510637'
ORA-17503: ksfdopn:2 Failed to open file +FLASHBACK/agost/onlinelog/group_4.260.668510637
ORA-15001: diskgroup "FLASHBACK" does not exist or is not mounted
ORA-15077: could not locate ASM instance serving a required diskgroup
ORA-29701: unable to connect to Cluster Manager
ORA-00312: online log 4 thread 2: '+DATA/agost/onlinelog/group_4.268.668510633'
ORA-17503: ksfdopn:2 Failed to open file +DATA/agost/onlinelog/group_4.268.668510633
ORA-15001: diskgroup "DATA" does not exist or is not mounted
ORA-15077: could not locate ASM instance serving a required diskgroup
ORA-29701: unable to connect to Cluster Manager
So obviouslly database wants to open online logs in the path like ASM. Which is wrong. What should I do to tell database to open it according to init.ora parameters
*.db_create_file_dest='e:\oradata\agost'
*.db_create_online_log_dest_1='e:\oradata\agost'
Any suggestions???
Thanks

Hi,
thanks for you quick answer. But I do restore to the local file system, even if the log says:
restoring datafile 00001 to +DATA/agost/datafile/system.272.668509367
restoring datafile 00002 to +DATA/agost/datafile/undotbs1.273.668509387 .....
all the datafiles are correctly restored. I think oracle uses the parameter db_create_file_dest and creates the files there.
I tried also the script with SET NEW NAME:
run {
Set newname for datafile 1 to 'e:\oradata\AGOST\system.272.668509367';
Set newname for datafile 2 to 'e:\oradata\AGOST\undotbs1.273.668509387';
Set newname for datafile 3 to 'e:\oradata\AGOST\sysaux.263.668509393';
Set newname for datafile 4 to 'e:\oradata\AGOST\ifsapp_archive_data.298.668509401';
Set newname for datafile 5 to 'e:\oradata\AGOST\ifsapp_archive_index.258.668509401';
Set newname for datafile 6 to 'e:\oradata\AGOST\ifsapp_blob.259.668509401';
Set newname for datafile 7 to 'e:\oradata\AGOST\ifsapp_data.274.668509405';
Set newname for datafile 8 to 'e:\oradata\AGOST\ifsapp_index.275.668509533';
Set newname for datafile 9 to 'e:\oradata\AGOST\ifsapp_report_data.260.668509661';
Set newname for datafile 10 to 'e:\oradata\AGOST\ifsapp_report_index.261.668509661';
Set newname for datafile 12 to 'e:\oradata\AGOST\undotbs2.264.668509661';
Set newname for datafile 13 to 'e:\oradata\AGOST\users.265.668509667';
Set newname for datafile 14 to 'e:\oradata\AGOST\ifsapp_index.270.668510837';
Set newname for datafile 15 to 'e:\oradata\AGOST\ifsapp_index.299.668510843';
Set newname for datafile 16 to 'e:\oradata\AGOST\ifsapp_data.300.668510859';
Set newname for datafile 17 to 'e:\oradata\AGOST\ifsapp_data.301.668510865';
Set newname for tempfile 1 to 'e:\oradata\AGOST\temp.276.668509397';
SQL "ALTER DATABASE RENAME FILE ''+DATA/agost/onlinelog/group_1.256.668509345'' TO ''e:\oradata\AGOST\REDO01.LOG'' ";
SQL "ALTER DATABASE RENAME FILE ''+FLASHBACK/agost/onlinelog/group_1.257.668509351'' TO ''e:\oradata\AGOST\REDO02.LOG'' ";
SQL "ALTER DATABASE RENAME FILE ''+DATA/agost/onlinelog/group_2.257.668509357'' TO ''e:\oradata\AGOST\REDO03.LOG'' ";
SQL "ALTER DATABASE RENAME FILE ''+FLASHBACK/agost/onlinelog/group_2.258.668509361'' TO ''e:\oradata\AGOST\REDO04.LOG'' ";
SQL "ALTER DATABASE RENAME FILE ''+DATA/agost/onlinelog/group_3.266.668510623'' TO ''e:\oradata\AGOST\REDO05.LOG'' ";
SQL "ALTER DATABASE RENAME FILE ''+FLASHBACK/agost/onlinelog/group_3.259.668510627'' TO ''e:\oradata\AGOST\REDO06.LOG'' ";
SQL "ALTER DATABASE RENAME FILE ''+DATA/agost/onlinelog/group_4.268.668510633'' TO ''e:\oradata\AGOST\REDO07.LOG'' ";
SQL "ALTER DATABASE RENAME FILE ''+FLASHBACK/agost/onlinelog/group_4.260.668510637'' TO ''e:\oradata\AGOST\REDO08.LOG'' ";
SET UNTIL SEQUENCE 795 THREAD 1;
SET UNTIL SEQUENCE 948 THREAD 2;
restore database;
switch datafile all;
recover database;
But it gives me this error in RMAN:
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
sql statement: ALTER DATABASE RENAME FILE ''+DATA/agost/onlinelog/group_1.256.668509345'' TO ''e:\oradata\AGOST\REDO01.LOG''
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of sql command on default channel at 03/06/2009 10:48:55
RMAN-20000: abnormal termination of job step
RMAN-11003: failure during parse/execution of SQL statement: ALTER DATABASE RENAME FILE '+DATA/agost/onlinelog/group_1.256.668509345' TO 'e:\oradata\AGOST\REDO01.LOG'
RMAN-11001: Oracle Error:
ORA-00600: internal error code, arguments: [kgeade_is_0], [], [], [], [], [], [], []
and in alert log i have got this:
Errors in file c:\oracle\product\10.2.0\admin\agost\udump\agost_ora_3200.trc:
ORA-00600: internal error code, arguments: [kgeade_is_0], [], [], [], [], [], [], []
Fri Mar 06 10:48:55 2009
ORA-600 signalled during: ALTER DATABASE RENAME FILE '+DATA/agost/onlinelog/group_1.256.668509345' TO 'e:\oradata\AGOST\REDO01.LOG' ...
dont know what to do.
There must be way how to recover it. I think my first try (without SET NEWNAME) is closer to the end, there is only need to "repair" the online logs.
Any other suggestions?
thanks

Changes between a RAC(Objects) and NON RAC

Hi all,
I want to findout what all the different things to be considered when an application is made to run on RAC env.
For eg: I found there is a difference between the way the Sequences are used in a RAC env from Non RAC.
Are there any guidelines for the Objects used in RAC?
Also can you point me to any doc related to tuning the interconnect as we are identifying wait events related to cluster "Cluster was consuming significant database time"
Thanks.

Hi hyddba,
Absolutely, at database level for application has no changes at objects.
At application code has changes to benefit aplications from failover TAF and FAN events.
http://www.oracle.com/pls/db102/to_toc?pathname=rac.102%2Fb28759%2Ftoc.htm&remark=portal+%28Getting+Started%29
Regards,
Rodrigo Mufalani
http://mufalani.blogspot.com

How to execute DBMS_JOB at exactly one RAC node

Hello,
after unsuccessfully searching for "RAC" and "DBMS_JOB" I open this thread.
Can you tell me how to dedicate one RAC-node for doing my batch-jobs
which are started by using dbms_job (so there is no tnsnames.ora which is used).
Thanks in advance

hi,
Let's say the instances are named:I1, I2, I3, I4
Issue:ALTER SYSTEM SET JOB_QUEUE_PROCESSES=0 SCOPE=BOTH SID='I1';
ALTER SYSTEM SET JOB_QUEUE_PROCESSES=0 SCOPE=BOTH SID='I2';
ALTER SYSTEM SET JOB_QUEUE_PROCESSES=0 SCOPE=BOTH SID='I3';
ALTER SYSTEM SET JOB_QUEUE_PROCESSES=10 SCOPE=BOTH SID='I4';So that only instance I4 will run jobs.
Regards,
Yoann.

How to Sync User attributes between local forests?

Hi
We are currently migrating three AD domains to one.
We are migrating users and distrubution groups with ADMT to the new domain, and stating to move services to the new domain. starting with sharepoint.
But for some time, some services will remain in the three old domains. To avoid maintaining user attributes like phonenumber, address etc multiple places, I would like to schedule a sync of some user attributes from the old domains to the
new.
Just like DirSync between a local directory to office 365 - but how is it done with local domains and not with office365?
So if a helpdesk user is updating a users phonenumber i one of the three old AD, it should be synced to the new domain after. I would like to run this as a schedule task every 15 minute or so.
ADMT is like a one time migrating tool to create the users in the new domain, but I can't see that it will support user attribute
synchronisation.
Do you have any suggention on how I can solve this task?
Best Regards, Steffen.

ADMT is like a one time migrating tool to create the users in the new domain, but I can't see that it will support user attribute
synchronisation.
I am not sure about the schedule task and if it is available to use in this scenario or not. You have two different security boundaries, so it is not easy as setting up a scheduled task to sync data. Even if it is possible, it would be very hard to established.
For selected users you have to define what to sync and what not to sync and etc.
I believe on of the things you can do is to use FIM 2010 in order to have a synchronized directory. That is the best thing you can do AFAIK.
Sync Users between domains with Forefront 2010
Mahdi Tehrani |
|
www.mahditehrani.ir
Please click on Propose As Answer or
to mark this post as
and helpful for other people.
This posting is provided AS-IS with no warranties, and confers no rights.

How to establish the relationship between component and character

Hi Gurus,
I'm using MTO with configurable materials,
I have create class, character, configurable profile,
then i create a sales order using VA01, i enter the FG, and choosed the charaters, but the components do not populated.
Do you know how to make all components can be populated automatically after the characters are chosen.
Regards,
Dragsky

Hi ,
Thank you for your response!
My usage is 1 -production
Relevant to sales is ticked in CS02
There is a material A which is working well, i copied material B form A and copied BOM from A.
so now , i choose Obj.dependencies in BOM item, a message pops up saying:
Used more than once - can only be maintained centrally
Message no. CU032
Diagnosis
You want to change global object dependencies locally for an object. However, this is not possible, as the object dependencies are allocated to other objects as well. For this reason, you can only change the dependencies globally using dependency maintenance functions.
Procedure
Change the object dependencies globally in the dependency maintenance function.
Regards,
Dragsky

How to create a relationsship between a DB Bock and Non DB Block

Hi All,
I am working with oracle forms 10g.
I have created a Custom form. I have two block. One is a DB Block and another is control block(ie multi record blk).
I tried to create a master detail relationship between these two block.
Master block:LC_Master_BLK(DB Block).
Detail block: LC_Detail_blk(Non DB Block).
Form object navigator I click relation in Master Block and a pop up window opens and form there i select Detail block.
And i give the join condition like
LC_Master_BLK.PO_HEADER_ID=LC_Detail_blk.PO_HEADER_ID.
I have made po_header_id as primary key in my custom table,refred in my master block.
But it shows error as
FRM-15004: Error while parsing the join condtion.
Can any one tell me how to solve this.
Thanks & Regards
Srikkanth

Hi Srikkanth.M
I have two block. One is a DB Block and another is control block(ie multi record blk).this is what i call bad form design pls exchange the two blocks making ...
Master block:LC_Master_BLK(Non DB Block).
Detail block: LC_Detail_blk (DB Block).
Now to link the 2 blocks then define the join condition as follows:
:LC_Master_BLK.PO_HEADER_ID = :LC_Detail_blk.PO_HEADER_IDPls Keep in mind that the join condition specifies the relationship between items in 2 blocks db
or
one which is the master Non DB Block (to filter the display of data through user input to display the result output of data related in multi-records in the detail block.
That how u can works with the relation between two blocks as urs..
Hope this helps...
Regards,
Amatu Allah

How to call User defined functions in Mathscript Node ?

Hi,
I have created a user defined function and saved it to Search path of Labview as an M file. If I run my program in Math script window, the function is recognized and the program works properly. If I do the same with MathScript node , the user defined functions are not identified.
Kindly help me with this problem. Thanks in advance
Cheers
Lenord Melvix

This page may help:
http://zone.ni.com/reference/en-XX/help/373123C-01/lvtextmathmain/caveats_recommendations_ms_search_...
Kevin C.

How to tell the difference between DRM (fairplay) music and non-DRM music?

Apple finally is selling non-DRM music and I've bought a couple songs in the past with ease. I like the system but I'm having a problem finding out which music is still using DRM.
Apple originally differentiated it by charging 30 cents more for the unprotected music. Now however they removed the surcharge, but there's no way to tell if the music I'm looking at is protected.
I choose not to buy DRMed music as I'm using my music to burn MP3 CDs for my car, and having to crack protection isn't the way I want to do it.
How can I tell using iTunes Store which music is DRM protected, and which music is DRM free?

Agreed, I have stopped buying from iTunes until they eliminate the restrictions, and have started replacing the songs I DID buy from iTunes with non copy protected ones from Amazon. I tell everyone not to buy from iTunes for exactly that reason. There are lots of other excellent options, which do not have the stupid restrictions that Apple has. The iPod is great, iTunes with DRM is incredibly annoying.

How to open a non-default port for sftp?

My MacMini at work used to listen on port 12345 for sFTP for close to 9 months but then something (probably a power cut...) messed all things Remote up with the office setup. So I tried to reset things. It didn't work. What do you think I'm doing wrong? The MacMini is running Tiger (10.4.10). Here's what I've done so far:
1. Drilled a hole for port 12345 on my Thomson (Alcatel SpeedTouch 780) modem/router, and disabled its Firewall and Parental Controls;
2. In System Prefs>Sharing>Firewall I have enabled the Firewall after making sure I've added a service for port 12345;
3. Also in System Prefs I've enabled Remote Login, to make sure the sftp daemon is running;
4. Back on the Thomson modem/router, I've set up a service to forward port 12345 of the router to port 12345 of my MacMini (I selected it by clicking on its MAC address in the appropriate drop down menu in the modem/router config page).
STILL: when I try to sftp to my MacMini from outside the office, I get a timeout error. Back at the MacMini, I run Network Utility and ask it to check at IP (the MacMini IP) for ports 12345 to 12345, and it doesn't report it as 'open' (it does for port 22).
I am bummed. What am I missing? I am also 100 miles away from the office on any given day, so it's not exactly easy to pop over and try various troubleshooting things. I have to kill this once and for all next I'm at the office, some time in the weekend!
As always, thanks, people.
< Edited by Host >

It sounds to me like the port forwarding is setup, so that's not the issue.
The issue is how to change sshd to listen on port 12345 rather than port 22. However, I'm not sure that you need to.
If you're trying to hide your server from the public, why not just setup your port forwarding to forward publicIP:12345 to privateIP:22.
That way you connect to port 12345 from your remote location, but don't have to change the server configuration at all.
The only reason why this wouldn't work would be if your router doesn't support different internal and external ports (e.g. it always maps to the same internal port number).
If that's the case then you need to change launchd to listen on port 12345. How you do that depends on whether you want to move the entire SSH service to port 12345, or whether you want SSH to support 22 and 12345 at the same time.
If the former, just edit /System/Library/LaunchDaemons/ssh.plist and change the lines:
<key>SockServiceName</key>
<string>ssh</string>
to:
<key>SockServiceName</key>
<string>italk</string>
(italk is the registered service for port 12345).
Then either reboot or unload/reload the ssh.plist to make the change active.
If you want ssh to run on both port 22 and 12345 then you should copy /System/Library/LaunchDaemons/ssh.plist to /Library/LaunchDaemons/ssh-12345.plist then make three changes to the new .plist file:
First, change the <Label> parameter to something unique (i.e. not 'com.openssh.sshd').
Second, remove the <Bonjour> array
Third, edit the SockServiceName as indicated above.
Once you've done that, reboot and you should be set.

RAC interconnect using UDP - default ports?

Is there a default port used by each cluster member to listen for connections over UDP? We use IPTABLES firewalls on our hosts, and I need to ensure the cluster heartbeat traffic gets through the firewall properly.
Thanks in advance.
Jeff

user2528460 wrote:
I understood the UPD ports that are going to be used on the interconnect (clearly without a firewall). Is there a set of default ports?I did a quick count (using <i>lsof</i> to list UDP ports opened on the Interconnect interface) that showed over 185 UDP ports in use.. E.g.
[root ~]# lsof -n -i | grep UDP | grep "10.0.1.1"
oracle     5577 oracle   10u IPv4   130938       UDP 10.0.1.1:22747
oracle     5577 oracle   15u IPv4   130941       UDP 10.0.1.1:64265
oracle     5579 oracle   10u IPv4   130948       UDP 10.0.1.1:39566
oracle     5579 oracle   15u IPv4   130951       UDP 10.0.1.1:55454
oracle     5579 oracle   21u IPv4   130970       UDP 10.0.1.1:27897
oracle     5581 oracle   10u IPv4   130973       UDP 10.0.1.1:14118
oracle     5581 oracle   15u IPv4   130976       UDP 10.0.1.1:13774
oracle     5583 oracle   10u IPv4   130983       UDP 10.0.1.1:33277
oracle     5583 oracle   15u IPv4   130986       UDP 10.0.1.1:6886
..snipped..I would not be concerned about what ports are in use. The important decisions are do you use bonding for the Interconnect, do you use jumbo or super-jumbo frames (MTU sizes), and so on. The actual ports being used has no real bearing as firewalling is not applicable.

How to make MAC print to an network printer on a non default port.....

Hello
I have a Gestetner 3235PCL printer at the office. The printer is on IP address 192.168.1.10 using Port 9101.
I can't seem to find a way to make the computer print to anything but the default port.
Any ideas if this is possible using a Mac?

Bruce is correct, but be certain you select IP > HP Jetdirect-Socket. Then enter the IP address with the port number separated by a colon " : ".
You could also use the CUPS web page to add the printer. At the Device menu, select 'Appsocket/HP Jetdirect' and then at the Device URI menu, after socket you can enter the IP address with port 9101, such as
socket://ip_address:9101/
Do you know if the printer is using a Fiery controller? I know the Fiery's offer three ports alternate to 9100 so that you can connect to a specific queue. 9100 will print to whatever has been selected as the default queue in the controller config, such as print, while 9101, 9102 and 9103 are the direct, print and hold queues respectively.
Pahu

Copying User authorization between databases

Hi All,
Let us say i got two DB. How to copy user authorization between them.
Thanks and Regards,
Vin

Hi Vin.......
You can use Copy express in order to transfer Authorizations from one DB to Other......
Regads,
Rahul

How to establish user equvalance between 2 rac nodes on non default ports??

Similar Messages

Maybe you are looking for