How to extend the varable life in workflow

Hi,
I created PO release strategy workflow.
Need to send mail with approvers list for eg in third level approvers need to know who are all approved in first  and second level.
Each level i can store who currently approving,But i need to send mail along with who are all approving in  previous levels(Each flow its act like new variable).
How we can do it. ??
Please give your valuable suggestions.
Thanks,
Ragav
Edited by: ragul1602 on Feb 14, 2012 10:54 AM

Hi,
This is really simple. If every level is a separate workflow instance (which I guess they are if this is the standard PO release WF stuff), you cannot really pass the data to the separate workflow instance.
As I said in my previous answer, try to find if the data is somewhere in the PO tables (who relased the PO), and put a separate step into the workflow and get this data.
If the data is not in the database, you need to use special tricks. Get the approver from the approval step (actual agent container element). Put it for example to a container element APPROVER in workflow container. Then in the next workflow instance, you need to read this data from the old instance by using function SAP_WAPI_READ_CONTAINER.
regards,
Karri

Similar Messages

  • How can i extend the battery life of my iphone 4s? when i left it in standby mode when i saw in 5hours it drains to 5%, i thought when i leave the phone the percent is still the same. whant am i goin to do?

    How can i extend the battery life of my iphone 4s? when i left 50% it in standby mode when i saw in 5hours it drains to 5% i saw 45%, i thought when i leave the phone the percent is still the same. whant am i goin to do?

    I was not aware of the fact one could use ringtones as alarms, this will suffice! Although I foresee some very awkward times as the sound does not stop once I respond to the reminder (it keeps going for good five - ten seconds after I "stop" the reminder), but it's better than missing it altogether!
    Thank you very much!
    Regarding the Alarmed app, doesn't it have to be running to actually remind you?
    -Modular747: I don't know anyone who actually reads the terms of service agreement, those things are usually up to thirty, small print pages full of legal jargon. Rules, I do read - not the legal documents (also they often contradict the laws in my country, but that's a whole different story).
    I agree with you - the average customer support consultant mostly cares about keeping his job and earning his salary (don't we all?) and thus racking up completted tasks (i.e. getting rid of customers as fast as possible - in a good mood). The "threat" none the less is real, if a cell phone causes me more trouble than it is worth, I will indeed throw it away (I have done so before) - and recommend a different brand to anyone willing to listen.
    Don't get me wrong, I love Apple and I've been faithfully using and recommending their producs for twenty years now, not because of fanboyism, but because they earned it. This calendar issue, however, is like a toaster that doesn't automatically eject the toast at the set time. I see it as a major flaw and after googling around a bit I see that it's been around since at least 2007 (THAT'S SEVEN YEARS!!) so I strongly believe they are aware of this problem by now, but are choosing to ignore it for some mysterious reason and it really ****** me off.
    I will send the feedback but based on my observations I suspect the Send button is merely a cleverly disguised Delete button.

  • How to increase the battery life of your N series ...

    What I am about to post here is valid for any 3G phone or device regardless of model but it is particularly focused towards the N series devices and their power hogging features.
    Your battery life is dependant on many many things. How often you take calls on the device, the condition of your battery, the features you use on the device and so on and on. Therefore it is impossible to say that by following the information in this post you will get x amount of days battery life, but it will get you more time out of the battery than you otherwise would have got.
    So with that out the way, if your looking to increase your battery life then follow these tips and your battery should start looking a lot healthier.
    First of all lets start with THE big one. The one that is going to save you the most juice. Switching 3G off.
    Yep, you heard me right. Just by switching the 3G capability of your phone off you will add hours and hours to your battery life. How is this so? Allow me to explain...
    Due to the rather poor delivery of 3G in the UK by the network operators, it is rare for any 3G phone to maintain a constant 3G signal. Instead you will find that the phone constantly flips between 3G and GSM mode (Keep an eye on your signal one day). Even those of you on Vodafone who probably have the best 3G network coverage will find this is the case.
    Unfortunately, this constant flipping between the two modes sucks power from the battery like a vampire as it alters its reception state for the different modes and the constant flipping is..well...causing it do this constantly! It can sometimes even make your phone unavailable for calls for very brief periods as it trips from GSM to 3G and vice versa.
    If you need to use 3G for video calls or whatever then I'm afraid your just going to have to live with this but if you don't (And lets face it few of us do) then you can switch 3G off and increase your battery life considerably.
    To do this, go into the "Settings" application (Found in the menu somewhere, by default Nokia normally stick it in "Tools"), and then to the "Phone" tab. In there you will see an option that says "Network mode" and you have a choice of "GSM" or "Dual Mode" (I.e. UMTS and GSM). Set it to GSM and your phone will restart. Once it restarts it will be working in GSM with GPRS speeds only but really for most purposes this is fine.
    You have now just extended your battery capability considerably. You can further extend it by going to the "Connection" tab, going into "Packet data" and changing it to "When needed" so it is not constantly checking for a data connection.
    The second big change you can make is to turn your phones wifi scanning capability off. The last time I looked not all Nokia's phones that have wifi capability can have their wifi cards switched off entirely but if you can, turn it off except for when you need to use it. Wifi is a power hog.
    The next big change you can make is to lower the screen brightness settings on your phone. The less bright your screen is the less power is being used to light it up. Nokia by default leave the screen brightness at something like 50%. Lowering this a bit more will conserve more juice. Before you do this though please consider the fact that lowering the brightness setting will have a big impact on your ability to see the screen clearly in sunny conditions although you will be fine in the dark as you can't lower the brightness that far.
    To lower the brightness, go to the settings tool in your phone and into the display option (Hidden in a subcategory called "Personalisation" on the N95). It won't hurt to set the power saving time out to 1 minute and the backlight time out to 10 seconds while your here (Although these are the Nokia default so they should already be set to this).
    Finally in regards to the screen, although they may look pretty, animated screensavers use more battery power than the standard blank screen with time and date so avoid them if you can.
    It also helps to keep Bluetooth switched off until you need it although the power savings are minimal in comparison to the other changes but every little milliamp counts!
    Using the above methods I generally get about 3 to 4 days with about 3 hours talktime on my N95 without using Bluetooth, GPS or anything like that (I might be able to get more but so far I have not paid attention to the battery state before I put it on charge). If I am on a long train journey I can get about 4 hours worth of full screen video and about 2 hours talktime over the period of about 24 hours before it needs a recharge. As I said at the start of the post your mileage will vary greatly depending on how you use your device.
    Hope this helps.
    Useful links: Phone firmware update | Nokia support site

    02-May-200701:14 PM
    bixby wrote:
    no keffa it is a cop out from nokia
    its not unfai as its a premium device with a premium price
    the n95 battery is atrocious
    dont change the post content as the title is 'How to increase the battery life of your N series device'
    your talking about nokia phones specifically
    the networks are not to blame
    they do not make the handsets : Nokia do !!!!!!!!!!
    I'm going to choose my words carefully here...
    I would never deny the battery on the N95 is not really up to the job of powering the N95 with its power hungry features. To put the same battery into a phone that has WiFi, GPS and a large 320x240 screen, the same one that goes into the E65 which has comparatively nothing compared to it is a bit pants.
    However at no point was I criticising them for the band hopping problem. I labelled the post as how to increase the battery life of your N series device because this is a board for the N series devices. It was a simple choice of wording and not intended to be cutting in any way and I did make a remark that the details would be true of any 3G device at the top of the post.
    What I was trying to point out in my second post is that the constant band hopping the phone is being forced to do that is draining its battery so much more quicker than it would if it had a constant signal of one kind or another isn't quite Nokia's fault.
    They build it to conform to a laid out specification for 3G. However if the network operators cannot be bothered to roll out their 3G infrastructure adequately enough that the phone can find and remain locked onto a 3G signal that is usable then what are Nokia to do other than offer you the capability to turn 3G off until you need it (Although note to Nokia: That **bleep** reboot the phone does when you do this is entirely unneeded and you know it).
    Blaming Nokia for this would be like blaming the manufacturer of your radio for failing to pick up radio because the radio station does not have any transmitters within range of your radio's receiver.
    Finally...this band hopping is exhibited by all 3G phones built by Samsung, Nokia, Sony Ericsson, etc, from their most budget 3G model to their priciest piece and is the reason that all phones with 3G capabilities have batteries that do not last for any respectable length of time because these phones are also having to band hop between 3G and GSM.
    Finally the proof is in the pudding. Turn 3G off for a few days. See your battery improve. Then (Although admittedly this will be harder to do...mcuh harder) find an area where you get a fairly decent 3G signal constantly. Again, see your battery improve. Try it with a different 3G phone...different manufacturer even. The same will be true.
    So I stand by my comment, the network operators and their woeful 3G rollout are the villains costing you a fair chunk of your battery and Nokia cannot be expected to mitigate this....but a better battery would be nice all the same...
    Useful links: Phone firmware update | Nokia support site

  • HOW TO CHANGE THE USEFUL LIFE FOR MORE ASSETS AT A TIME FOR ASSET CLASS

    Hi All,
    Asset which is under Asset Class Support system-B700. Here every thing is ok but the problem in USE FULL LIFE which is come by default. It must be 4 instead of  5.   So can any body help me out from this how to change the Useful life in that Asset class.  In that Asset Class we have the morethan 200 Assets. It was happend in Prdocution system so now the problem is where i can change the useful life for the asset class either in DEV or PRD.
           Also i want to know the information of How these assets are Uploaded into the system (Lsmw or etc). this is very urgent for me.
    Thanks in Advance,
    Regards,
    Siva.

    Hi Ashok,
         Can i know the reason how it was happend. i mean instead of 4 years the system showing is 5yesrs any reason is there behind that.
    Thanks in Advance.

  • Hi i would like to know how to extend the range of my time capsule wifi network(500G 802.11n) using an airport express. i have a double storey home and would like to extend range to my upstairs bedrooms.i have a time capsules network setup via a netgear a

    hi i would like to know how to extend the range of my time capsule wifi network(500G 802.11n) using an airport express. i have a double storey home and would like to extend range to my upstairs bedrooms.i have a time capsules network setup via a netgear adsl.i have a second imac upstairs which connects to time capsule wifi network (it is within range as it is directly abobe on 1st floor)
    could you tell me how best to set airport express up to extend my wifi range?

    Greetings,
    This is called an "Extended wireless network".
    Read this article for details and steps on how to extend your TimeCapsule's network:
    http://support.apple.com/kb/HT4259
    Cheers.

  • How to call the abap program in workflow

    HI Exeprts,
    I need to call one abap program in workflow.
    can any tell me how to call the abap program in workflow.
    thanks &regards
    ramesh

    Dear Ramesh,
    U can use REPORT business object.
    Method : EXECUTE_2
    Regards,
    Sagar

  • How to extend the range with a second Airport Express? Do I need a DSL cable?

    How to extend the range with a second Airport Express? Do I need a DSL cable?

    Thanks, now we need a bit more information, please, in order to provide you with the correct information that you need.
    I assume that you already have one AirPort Express.....either a model A1264 or A1392.....set up and operating OK, is that correct?
    If yes, you can extend the network either by using wireless or an Ethernet cable with a second AirPort Express.....either the A1264 or A1392 model. A wired connection is the way to go, if possible, since it provides better performance.  But, wireless might work OK for you if you want to try that.
    Let us know "how" you want to extend......wireless or wired?

  • Hi! Anyone know how to extend the intro of the music I want to use in a video in imovie?

    Hi! Anyone know how to extend the intro of the music I want to use in a video in imovie?

    Hi trineram,
    Welcome to the Support Communities!
    The article below may be able to help you understand the parameters for adding music to an iMovie for iOS project.
    iMovie for iOS (iPad): Add background music
    http://support.apple.com/kb/PH3192
    Cheers,
    - Judy

  • How to extend the time line for the premiere on mac pro mavericks

    how to extend the time line for the premiere on mac pro mavericks

    Wrong place.
    Try the Adobe Premiere forum.
    http://forums.adobe.com/community/premiere
    Good luck,
    x

  • How to extend the costing view for a material

    How to extend the costing view for a material

    Use MM01 Trxn code and Select Material and Select Costing Views and Maintain, Save it.
    Else Use MM50 and Select Material and Mainenance Status as G Costing and Execute, Maintain & Save.

  • How to improve the battery life after upgrading 3gs to ios5, how to improve the battery life after upgrading 3gs to ios5

    how to improve the batter life 3gs phone on ios5 os

    Also you may want to check a few things if you have location service turned on for Weather app, cuz every time you check your notification center, it will always check your location for the current update on the weather. If you are in the same location the entire time, you really don't need that on. Also while you are on the location service setting, check some of the apps that uses location service and if you don't use it, then turn it off while you are in there. Also maybe turn them all off and then turn on one at a time and find the culprit.
    If it's not your location service, it could be that one your apps is running in the background. Double click home button, this will bring up the recently used tray, hold one of the app for 3 seconds until the - button comes out, then close all the apps. Or just do a hard reset of your iphone by holding the power button and the home button at the same time for 10-15 seconds until the apple logo appears.
    Anything that will require to data connection will use battery. If you have wi-fi at home, then I suggest you keep it on wi-fi because your iphone will last longer if it's on wi-fi then on battery.
    If none of the above suggestion worked, then I suggest you try restoring your phone and set it up as new and see what happens. Just make sure you have a separate back up for your contacts.

  • How to extend the size of a layer?

    Hi all,
    Hopefully this is an easy one, but I think I'm just thinking about it wrong.  I'm animating the movement of one part of a photo.  I duped the photo layer, masked out the subject I want on the copy layer and have animated its position over time.  Pretty straight forward.  The problem is that as the item moves its edges are seen.  I wanted to just use the clone stamp to add a little more to the image but obviously you can't paint or stamp past the edge of the layer.  So I was trying to figure out how to 'extend' the bounds of the layer a little so that I can fill in the missing area.
    Thanks for any input.
    -Chris

    Hi Todd,
    Thanks for the reply.  Unfortunately, I'm not having any success with this method.  Here's what I have:
    Original photo of kids with ball at playground.  Ball is at lower left but partially cut off. Photo is on layer 1.
    I duplicate layer 1.
    Rename layer 2 to 'ball' and layer 1 to 'bg'
    On ball layer I mask out the ball and then animate its position over the length of the clip.
    When I precompose the ball layer (I tried both moving the attributes and leaving them as is) I get the new composition 'ball comp 1'.  I open up ball comp 1 and change the composition settings to make the width taller.
    So far, so good.  Now I'm trying to follow your suggestion to then paint on the precomposition layer.  Do you mean to go back to the original composition where the new pre-comp layer is and try to paint on it?  If so, that doesn't work.  If I select the Clone tool and try to paint the layer actually gets moved rather than painted on.  If I open the new 'ball comp 1' composition and try to paint there it doesn't work either. And if I open up the layer in that comp that has the ball in it and try to paint there, the edges are still the original edges. 
    Any idea where I went wrong?
    THanks,
    Chris

  • How to renew the expired certificate of workflow manager in sharepoint 2013?

    Dear All,
    How to renew the expired certificate of workflow manager in sharepoint 2013 and what all steps needs to be done inorder the workflow to work properly.
    Thanks & regards,
    Asha

    Hi Asha,
    This should help you
    https://social.technet.microsoft.com/Forums/sharepoint/en-US/bfd3c92b-1a05-4cc5-9b90-8c5c8877dd2c/changing-expired-certificate-for-sharepoint-2013-workflow-manager?forum=sharepointadmin
    Please remember to click 'Mark as Answer' on the answer if it helps you

  • How to extend the range of my Airport Extreme network by adding an Airport Express

    How to extend the range of my Airport Extreme network by adding an Airport Express?

    You have to make sure that the AirPort Express is in Factory Default Settings. If it is straight out of the box, it is ready to be configured.
    The instructions that I will provide are for using AirPort Utility 6.0, which you have.
    Locate the Express in the same room as the AirPort Extreme for the configuration. Power it up and allow a full minute for the Express to display a blinking amber light.
    Make sure that the wireless is turned on your Mac
    Open AirPort Utility 6.0 and look at the small rectangle in the upper left hand corner of the display. It should now read something like "Other AirPort Base Stations (1)"
    Click on the rectangle, and then click on the AirPort Express xxxxxx listing
    AirPort Utility will take a minute or two to analyze the settings on your network and then suggest that  the Express be configured to "Extend" your wireless network.
    Edit the Base Station name to your liking, then click Next in the lower right hand corner
    Allow a full minute or two let AirPort Utility do its work
    When you see Setup Complete, click Done at the lower right of the window.
    Now move the AirPort Express to a location that is approximately half way between the AirPort Extreme and the area that needs more wireless coverage.
    You should be in business.

  • How to Extend the count of item code in IC_ITEM_MST table

    Hi Friends.
    Recently we used 10 count of IC_ITEM_MST table . But we want to extend the count 15. How to define pls help me.
    Regards
    Babu.J

    Duplicate post -- How to Extend the count of item code in IC_ITEM_MST table

Maybe you are looking for