How to get SPOOL ID while using NEW-PAGE statement
Hi Experts
I am using "NEW-PAGE PRINT ON......PRINT OFF" statement to write directly in to the spool. while in this processing i want to get the SPOOL ID under which data is written. Is it possible? if yes, how ?
Thanks in Advance
Mukundhan
Hi
Check the system field
<b>sy-spono</b>
for Spool ID at that place of code
Reward points if useful
Regards
Anji
Similar Messages
-
How to get default values while using the transaction "BP"
Hi Group,
I have a query on how to get default values while using the transaction <b>BP</b>?
The thing is:
when I enter into the transaction "BP", I need to see some default values to some of the input fields in the screen.
how can I achieve this?
So please kindly let me know the procedure to achieve this.
Thanks & Regards,
Vishnu.Hi,
The events of BDT can be used to default some fields on creating a partner.
For this create a function module for ISDAT. attach that event in BUS7.
In the ISDAT funtion modulethe following code should be used.
For example to set the nationality:
I_BUSDEFAULT-NATIO = 'DE.
CALL FUNCTION 'BUP_BUPA_FIELDVALUES_SET'
EXPORTING
i_busdefault = I_BUSDEFAULT
Regards, Smita. -
How to get spool number when using SUBMIT job
Hi All,
I am calling standard program using SUBMIT through JOB as below. Now I need spool number for this job to covert the output to PDF and send to mail. See the below code and guide me.
CALL FUNCTION 'JOB_OPEN'
EXPORTING
jobname = name
IMPORTING
jobcount = number
EXCEPTIONS
cant_create_job = 1
invalid_job_data = 2
jobname_missing = 3
OTHERS = 4.
IF sy-subrc = 0.
data: Zscreen type table of RSPARAMS with header line.
Zscreen-selname = 'PM_AENNR'.
Zscreen-kind = 'P'.
ZSCREEN-LOW = '500000000125'.
APPEND ZSCREEN.
SUBMIT RCC00130 WITH selection-table Zscreen TO SAP-SPOOL
SPOOL PARAMETERS print_parameters
WITHOUT SPOOL DYNPRO
VIA JOB name NUMBER number
AND RETURN.
IF sy-subrc = 0.
CALL FUNCTION 'JOB_CLOSE'
EXPORTING
jobcount = number
jobname = name
strtimmed = 'X'
EXCEPTIONS
cant_start_immediate = 1
invalid_startdate = 2
jobname_missing = 3
job_close_failed = 4
job_nosteps = 5Hi,
Do this way, first get print parameters by using function module 'GET_PRINT_PARAMETERS'
CALL FUNCTION 'GET_PRINT_PARAMETERS'
EXPORTING
destination = 'LP01'
list_name = 'TEST'
list_text = 'SUBMIT ... TO SAP-SPOOL'
immediately = ' '
line_size = '1023'
no_dialog = 'X'
IMPORTING
out_parameters = wa_pri_params
valid = w_valid.
If it returns success then
IF w_valid EQ 'X'.
CONCATENATE 'R'
w_tabix
sy-datum+4(4)
sy-uzeit INTO
wa_pri_params-plist.
ENDIF.
SUBMIT rprccc00
WITH firmennr = w_cid
WITH bel_clus = 'X'
WITH testlauf = ' '
WITH not_lokl = 'X'
WITH file_in = w_arc_out
TO SAP-SPOOL WITHOUT SPOOL DYNPRO
SPOOL PARAMETERS wa_pri_params AND RETURN.
COMMIT WORK AND WAIT.
SELECT rqident
FROM tsp01
INTO w_rqident
UP TO 1 ROWS
WHERE rq2name = wa_pri_params-plist.
ENDSELECT.
CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
EXPORTING
src_spoolid = w_rqident
no_dialog = 'X'
dst_device = 'LP01'
pdf_destination = 'X'
TABLES
pdf = t_pdf.
Hope it solves your problem
Regards
Krishna -
How to get Apex/EPG to use new SSL certificate
We have Apex 4.0.2 installed with the Embedded PL/SQL gateway (EPG) on Oracle 11.1.0.7.
We have successfully configured HTTPS with a self-signed certificate on our production and pre-production servers.
On our pre-production server we have successfully replaced the self-signed certificate with a CA signed certificate. To get Apex to use the new certificate we had to restart the database.
I would like to avoid restarting the database on our production server if possible.
Is there is another way to have Apex use the new certificate without re-starting the database?Jari -
That's good to know. I assume restarting the listener loads the new configuration too.
I found this knowledge base article which isn't specifically for Apex but is similiar:
How To Replace An Expired Or Expiring Certificate in Wallet Manager in Oracle AS 10g and FMW 11g [ID 303299.1]
The step after adding the certificate to the wallet is:
+10. Restart the component that uses the Wallet i.e Webcache, HTTP Server, or Database, as the Wallet is stored in memory and will not be re-read until the component is restarted+
That makes me wonder if there is a way to cause the Embedded PLSQL Gateway to reload the wallet short of restarting the database.
Any thoughts on whether issuing these commands might do that?
dbms_xdb.sethttpport(0);
dbms_xdb.sethttpport(8080);Thanks.
John -
How to Get Top 10 records using SQL select statement.
:-) Hiee E'body,
I want to generate a sql report in which I only want the top 10 records based on the numeric value of a column.
For Example,
To generate a Location Wise, Employee Wise Years of Service Report.
Here I need the Top 10 Employees according to their No. of Years of Service for all the existing locations using a single query.
eg.
Location Emp No. YOS
India - 22 30
212 28
819 24 ...
US 123 40
312 33
90 33
144 30 ...
UK 77 20
79 20
331 18
109 16 ...
Every Location should display their respective Top 10 Employees
regarding their No. of Years of Service.
Please let me the know the solution to this.
Have a nice day.
Thanking You,
Vivek Kapoor.For example if the table contained (India rows only shown) :
India 202 30
India 212 28
India 819 24
India 820 24
India 900 20
India 920 18
India 922 17
India 925 16
India 926 15
India 927 14
India 928 13
India 929 13
India 930 12
do you want to see
India 202 30
India 212 28
India 819 24
India 820 24
India 900 20
India 920 18
India 922 17
India 925 16
India 926 15
India 927 14
or
India 202 30
India 212 28
India 819 24
India 820 24
India 900 20
India 920 18
India 922 17
India 925 16
India 926 15
India 927 14
India 928 13
India 929 13
Also if the India rows were
India 202 30
India 212 30
India 819 30
India 820 30
India 900 30
India 920 30
India 922 30
India 925 30
India 926 30
India 927 30
India 928 30
India 929 30
do you want to see
India 202 30
India 212 30
India 819 30
India 820 30
India 900 30
India 920 30
India 922 30
India 925 30
India 926 30
India 927 30
or
India 202 30
India 212 30
India 819 30
India 820 30
India 900 30
India 920 30
India 922 30
India 925 30
India 926 30
India 927 30
India 928 30
India 929 30
Please clarify.
Thanks,
Partha -
I had a "pdf export" plan and upgraded it to "pdf pack" plan and it was charged the full price of the new plan in my credit card. How to get back the non used part of the old plan?
Hi edilsoncf,
I've seen your question on several forums, and responded there. Did you get your subscription sorted out?
See: How do I get a refund if I have multiple Acrobat service subscriptions?
Best,
Sara -
Blank page is getting displayed in SAPScript when using NEW-PAGE option.
Hello Experts,
We have created a customized SAPScript and in this separate Script is generated based on the currency(WAERS).
So if we have 3 different currencies, then 3 pages will be created with there details, but we are using NEW-PAGE option in
MAIN window to separate the pages and after 3rd page it is displaying 4th page also with footer details.
So how can we avoid last blank page which is getting displayed?Hi isha.walia ,
This issue can be solved by two ways. Please take the one which suits you better.
Solution 1: If you need to generate separate prints for different currencies.
In the driver program, build an internal table for different currencies which needed to be printed. (Using delete adjacent duplicates, build the internal table with exact number of currencies to be printed). Remove the NEW-PAGE option and call the script/form inside the loop. Do the necessary conditions to manipulate the print.
Advantages of above solution: Better control on spools if needed.
Solution 2: Get the count of the number of pages in a variable. Inside the print loop, increment a flag counter. Check it against the variable which contains the number of pages to be printed at the end of each page. Exit the loop when the number of pages to be printed is reached.
Advantage of above solution: Simple to write the program.
Thanks and Regards
Raghesh R S -
How to Get Spool ID after PO release. (To send PDF for ext E-mail)
Hi Experts,
I am new to Email sending from SAP.
I am facing a big problem from many days. I am in a new support project.
I have a issue that when ever a PO is released from ME23N or ME28 it should send a mail to vendor.
This is working fine in Development including delivery report or failed report back to approver...
I dont know where is PRD and who is doing that,
But my support manager says that only some PO's are sent to vendors not all...
everytime they approve only some emails sent to vendors...!
But every PO is same and for same vendor's...
Even failure & delivery messages are missing for (sent failed email's)
But after all I observed only one thing that we have a select statement....
DATA: GS_RESULT TYPE ITCPP.
DATA : L_DATE(9).
DATA : BEGIN OF LT_TSP01 OCCURS 0,
RQIDENT LIKE TSP01-RQIDENT,
RQCRETIME LIKE TSP01-RQCRETIME,
DATE(8),
TIME(8) TYPE N,
END OF LT_TSP01.
SELECT RQIDENT RQCRETIME FROM TSP01 INTO CORRESPONDING FIELDS OF
TABLE LT_TSP01 WHERE RQCRETIME LIKE L_DATE
AND RQIDENT EQ GS_RESULT-TDSPOOLID.
IF SY-SUBRC = 0.
(All Email sending code)(including delivery & failure delivery)
Endif.
So I suspect it is not picking up the Spool request from this Table TSP01 or may be not updated to this table.
I have searched in SCN, I have seen may E-mail Codings
But every one says to get Spool- ID & Convert to PDF,,,
My Question is How to get Spool ID correctly and tell me how it is updated. when a PO released by ME23N or ME28.
please any one clear my doubt as I am completely helpless here.
Thanks in advance,
Dunlop.Hi,
Is it a SMart form.....
If it is a smartform, then Smartfom interface itself has a spool id parameter....
you can directly het that from this parameter...
CALL FUNCTION "FMa Name'
EXPORTING
control_parameters = wsl_control
output_options = wsl_outpt
user_settings = ''
wtg_itemdetails = tl_itemdet
wtg_vttp = l_vttp
IMPORTING
job_output_info = sl_spooldet
EXCEPTIONS
formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4
OTHERS = 5.
IF sy-subrc <> 0.
ENDIF.
The inporting parameter sl_spolldet will have the Spool id.
and you fetch by, using the below mentioned way..........
READ TABLE wsl_spooldet-spoolids INTO wsl_wa_spool INDEX 1.
IF sy-subrc = 0.
Convert it into PDF using 'CONVERT_OTFSPOOLJOB_2_PDF'
then attach it and send a mail.....with all properties set such as Delivery report....
endif.
If you have any issues, please let me know........
Thanks & Regards,
Vamsi -
Replacing System hard drive with a new one. How to get everything over to the new boot drive? Should I use Carbon Copy or does apple have a better untility to do this?
I can't get my current system drive (OSX 10.8.3) to start on the first try. I always have to shut down and restart again to finally see the Apple logo.
Have used disc utility to repair the disc and permissions several times and that works. The next time I boot up, it works fine and I get the apple logo, but then the second time I boot up, it's back to the blank screen again and it only boots after the second try. I have tried this repair three different times now always with the same result. Works right the first try (after the repair) then from the second time on it doesn't work. I just get the white screen until I reboot a second time.
Thinking I should change drives but what's the easist and best way to move everything over to the new drive so it will boot correctly with all my data on it. This is the system drive for a Pro Tools 10HD setup. MacPro 3,1 with 16 gigs ram and OSX10.8.3 on it.
Thanks for any help!If you have a time machine back up of your current drive you can do this
Shut down your computer, install the new drive. While the computer is off plug in the external hard drive that you have your time machine back up on. Hold Option key while the computer turnes on, let go of the option key once you get a grey screen. Shortly after you'll see a list of bootable drives, select the one that has your time machine back up on it and boot into that drive.
From there go into disk utility, format your new drive too, osx extended journaled ( I think, double check that, its been awhile since ive had to do this), hit format
Exit disk utility and then you can use time machine to copy all your exisit data to the new hhd and then your pretty much done.
There is also a program called Carbon Cloner that will do esentially the same thing however I've never uesed it. -
How to get existing library imported to new itunes install, old library was not backed up or exported. This occured due to Win 7 user profile was corrupt.
I know that in Mac OS X one can pick which library to use by holding down the option key while starting iTunes. What's the Windows equivalent?
Press the Shift key.
WIll the fact that the music is now on another physical drive make a difference
No.
I know the previous install is at least 7.0, but I have no idea about which point release.
Try checking the content of the iTunes Music Library.xml file.
Finally, what's the expected behaviour (or required procedure) with respect to reauthorization of this computer to use the same ITMS-purchased files?
You will be asked to reauthorize the computer.
(28446) -
How to get certain applied styles using script?
Hi All,
I need to know how to get certain applied styles using ID Scripting. I don't have much experience in InDesign so need some help.
Here is a screenshot with a sample text with the said styles applied and highlighted.
I need to know what texts in my document have these styles applied like All Caps, Strikethrough, Underline, Subscript and Superscript etc.
Please help.
Thanks!Hi Poortip87
The first thing you have to understand is how to refer to "where" you want to apply the style.
If you want the script to apply the style to the selected text then you would use for example app.selection[0].strikeThru = true;
If you for example want to underline the last word of the first paragraph of the first story you would use app.activeDocument.stories[0].paragraphs[0].words[-1].underline = true;
If you just wanted the first letter of that word underlined then you would add .characters[0] after the words[-1]
To for example apply All Caps to all the text in all the stories you would use
app.activeDocument.stories.everyItem().texts[0].capitalization = Capitalization.ALL_CAPS;
The easiest way to find how to set properties to a selections is to set them manually and make the selection and then run the script below.
You should be able to find all the properties you want very easily after running the script.
Or you can use Jongwares excellent reference guide. Indesign JavaScript Help
HTH
Trevor
// script to show most of the selection properties by Trevor
// Creative-Scripts.Com (Still not ready!) available (sometimes) for custom scripts $$$
// scripts {at} Creative-Scripts [dot] Com
$.level = 0; // set debug mode to allow try catch (not read only as stated in manual);
if (!app.selection.length) exit();
var c = 0, s = app.selection[0], p,
a = [], n, er;
for (n in s) {
try {
p = s[n];
if (p && p.constructor.name === "Enumerator") p = getEnum(p ,n);
a[c++] = n + ": " + p;
} catch (er) {a[c++] = n + ": ???"}
var f = new File (Folder.temp + +(new Date) + ".txt");
f.open('r');
f.encoding = "UTF-8";
f.lineFeed = ($.os[0]=="M") ? "Macintosh" :" Windows";
f.open('w');
f.write("\uFEFF" + a.join("\r"));
f.close();
$.sleep(300);
f.execute(true);
function getEnum (q, n) {
var enums = ["AcrobatCompatibility",
"AddPageOptions",
"AdornmentOverprint",
"AlignDistributeBounds",
"AlignOptions",
"AlignmentStyleOptions",
"AlternateGlyphForms",
"AlternatingFillsTypes",
"AnchorPoint",
"AnchorPosition",
"AnchoredRelativeTo",
"AnimationEaseOptions",
"AnimationPlayOperations",
"AntiAliasType",
"ArrangeBy",
"ArrowHead",
"AssetType",
"AssignmentExportOptions",
"AssignmentStatus",
"AutoEnum",
"AutoSizingReferenceEnum",
"AutoSizingTypeEnum",
"BalanceLinesStyle",
"BaselineFrameGridRelativeOption",
"BaselineGridRelativeOption",
"BehaviorEvents",
"BevelAndEmbossDirection",
"BevelAndEmbossStyle",
"BevelAndEmbossTechnique",
"BindingOptions",
"BitmapCompression",
"BlendMode",
"BlendingSpace",
"BookContentStatus",
"BookletTypeOptions",
"BoundingBoxLimits",
"BuildingBlockTypes",
"BulletCharacterType",
"BulletListExportOption",
"Capitalization",
"ChangeBackgroundColorChoices",
"ChangeCaseOptions",
"ChangeConditionsModes",
"ChangeMarkings",
"ChangeTextColorChoices",
"ChangeTypes",
"ChangebarLocations",
"ChangecaseMode",
"ChapterNumberSources",
"CharacterAlignment",
"CharacterCountLocation",
"CharacterDirectionOptions",
"ClippingPathType",
"ColorModel",
"ColorOutputModes",
"ColorRenderingDictionary",
"ColorSettingsPolicy",
"ColorSpace",
"ComposeUsing",
"CompressionQuality",
"ConditionIndicatorMethod",
"ConditionIndicatorMode",
"ConditionUnderlineIndicatorAppearance",
"ContainerType",
"ContentType",
"ContourOptionsTypes",
"ConvertPageBreaks",
"ConvertShapeOptions",
"ConvertTablesOptions",
"CoordinateSpaces",
"CopyrightStatus",
"CornerOptions",
"CreateProxy",
"CrossReferenceType",
"CursorTypes",
"CustomLayoutTypeEnum",
"DataFormat",
"DefaultRenderingIntent",
"DesignOptions",
"DiacriticPositionOptions",
"DigitsTypeOptions",
"DimensionsConstraints",
"DisplayOrderOptions",
"DisplaySettingOptions",
"DistributeOptions",
"DocumentIntentOptions",
"DocumentPrintUiOptions",
"DynamicDocumentsJPEGQualityOptions",
"DynamicDocumentsTextExportPolicy",
"DynamicMediaHandlingOptions",
"DynamicTriggerEvents",
"EPSColorSpace",
"EPSImageData",
"EditingState",
"EmptyFrameFittingOptions",
"EndCap",
"EndJoin",
"EpubCover",
"EpubVersion",
"EventPhases",
"ExportFormat",
"ExportLayerOptions",
"ExportOrder",
"ExportPresetFormat",
"ExportRangeOrAllPages",
"FeatherCornerType",
"FeatherMode",
"FeatureSetOptions",
"FindChangeTransliterateCharacterTypes",
"FirstBaseline",
"FitDimension",
"FitMethodSettings",
"FitOptions",
"Fitting",
"FlattenerLevel",
"Flip",
"FlipValues",
"FloatingWindowPosition",
"FloatingWindowSize",
"FollowShapeModeOptions",
"FontDownloading",
"FontEmbedding",
"FontStatus",
"FontTypes",
"FootnoteFirstBaseline",
"FootnoteMarkerPositioning",
"FootnoteNumberingStyle",
"FootnotePrefixSuffix",
"FootnoteRestarting",
"GIFOptionsPalette",
"GlobalClashResolutionStrategy",
"GlobalClashResolutionStrategyForMasterPage",
"GlowTechnique",
"GoToZoomOptions",
"GradientType",
"GridAlignment",
"GridViewSettings",
"GuideTypeOptions",
"HeaderFooterBreakTypes",
"HeaderTypes",
"HorizontalAlignment",
"HorizontalOrVertical",
"HyperlinkAppearanceHighlight",
"HyperlinkAppearanceStyle",
"HyperlinkAppearanceWidth",
"HyperlinkDestinationPageSetting",
"ICCProfiles",
"IconSizes",
"ImageAlignmentType",
"ImageConversion",
"ImageDataTypes",
"ImageExportOption",
"ImageFormat",
"ImagePageBreakType",
"ImageResolution",
"ImageSizeOption",
"ImportFormat",
"ImportPlatform",
"ImportedPageCropOptions",
"InCopyUIColors",
"IndexCapitalizationOptions",
"IndexFormat",
"InkTypes",
"InnerGlowSource",
"InteractiveElementsOptions",
"InteractivePDFInteractiveElementsOptions",
"JPEGOptionsFormat",
"JPEGOptionsQuality",
"JoinOptions",
"JpegColorSpaceEnum",
"Justification",
"KashidasOptions",
"KentenAlignment",
"KentenCharacter",
"KentenCharacterSet",
"KinsokuHangTypes",
"KinsokuSet",
"KinsokuType",
"LanguageAndRegion",
"LayoutRuleOptions",
"Leading",
"LeadingModel",
"LibraryPanelViews",
"LineAlignment",
"LineSpacingType",
"LinkStatus",
"ListAlignment",
"ListType",
"LiveDrawingOptions",
"Locale",
"LocationOptions",
"LockStateValues",
"MapType",
"MarkLineWeight",
"MarkTypes",
"MatrixContent",
"MeasurementUnits",
"MojikumiTableDefaults",
"MonoBitmapCompression",
"MoviePlayOperations",
"MoviePosterTypes",
"NestedStyleDelimiters",
"NoteBackgrounds",
"NoteColorChoices",
"NothingEnum",
"NumberedListExportOption",
"NumberedParagraphsOptions",
"NumberingStyle",
"OTFFigureStyle",
"ObjectTypes",
"OpenOptions",
"OpenTypeFeature",
"OutlineJoin",
"OverrideType",
"PDFColorSpace",
"PDFCompressionType",
"PDFCrop",
"PDFJPEGQualityOptions",
"PDFMarkWeight",
"PDFProfileSelector",
"PDFRasterCompressionOptions",
"PDFXStandards",
"PNGColorSpaceEnum",
"PNGExportRangeEnum",
"PNGQualityEnum",
"PPDValues",
"PageBindingOptions",
"PageColorOptions",
"PageLayoutOptions",
"PageNumberPosition",
"PageNumberStyle",
"PageNumberingOptions",
"PageOrientation",
"PagePositions",
"PageRange",
"PageReferenceType",
"PageSideOptions",
"PageTransitionDirectionOptions",
"PageTransitionDurationOptions",
"PageTransitionOverrideOptions",
"PageTransitionTypeOptions",
"PageViewOptions",
"PaginationOption",
"PanelLayoutResize",
"PanningTypes",
"PaperSize",
"PaperSizes",
"ParagraphDirectionOptions",
"ParagraphJustificationOptions",
"PathType",
"PathTypeAlignments",
"PdfMagnificationOptions",
"PerformanceMetricOptions",
"PlacedVectorProfilePolicy",
"PlayOperations",
"PointType",
"Position",
"PositionalForms",
"PostScriptLevels",
"PreflightLayerOptions",
"PreflightProfileOptions",
"PreflightRuleFlag",
"PreflightScopeOptions",
"PreviewPagesOptions",
"PreviewSizeOptions",
"PreviewTypes",
"PrintLayerOptions",
"PrintPageOrientation",
"Printer",
"PrinterPresetTypes",
"Profile",
"ProofingType",
"RangeSortOrder",
"RasterCompressionOptions",
"RasterResolutionOptions",
"RecordSelection",
"RecordsPerPage",
"RenderingIntent",
"RepaginateOption",
"ResizeConstraints",
"ResizeMethods",
"ResolveStyleClash",
"RestartPolicy",
"RotationDirection",
"RowTypes",
"RubyAlignments",
"RubyKentenPosition",
"RubyOverhang",
"RubyParentSpacing",
"RubyTypes",
"RuleDataType",
"RuleWidth",
"RulerOrigin",
"SWFBackgroundOptions",
"SWFCurveQualityValue",
"Sampling",
"SaveOptions",
"ScaleModes",
"Screeening",
"ScreenModeOptions",
"ScriptLanguage",
"SearchModes",
"SearchStrategies",
"SelectAll",
"SelectionOptions",
"Sequences",
"ShadowMode",
"SignatureSizeOptions",
"SingleWordJustification",
"SmartMatchOptions",
"SnapshotBlendingModes",
"SortAssets",
"SoundPosterTypes",
"SourceFieldType",
"SourceSpaces",
"SourceType",
"SpanColumnCountOptions",
"SpanColumnTypeOptions",
"SpecialCharacters",
"SpreadFlattenerLevel",
"StartParagraph",
"StateTypes",
"StaticAlignmentOptions",
"StoryDirectionOptions",
"StoryHorizontalOrVertical",
"StoryTypes",
"StrokeAlignment",
"StrokeCornerAdjustment",
"StrokeFillProxyOptions",
"StrokeFillTargetOptions",
"StrokeOrderTypes",
"StyleConflict",
"StyleSheetExportOption",
"SyncConflictResolution",
"TabStopAlignment",
"TableDirectionOptions",
"TableFormattingOptions",
"TagRaster",
"TagTextExportCharacterSet",
"TagTextForm",
"TagTransparency",
"TagType",
"TagVector",
"TaggedPDFStructureOrderOptions",
"TaskAlertType",
"TaskState",
"TextExportCharacterSet",
"TextFrameContents",
"TextImportCharacterSet",
"TextPathEffects",
"TextStrokeAlign",
"TextTypeAlignments",
"TextWrapModes",
"TextWrapSideOptions",
"ThumbsPerPage",
"TilingTypes",
"ToolTipOptions",
"ToolsPanelOptions",
"TrapEndTypes",
"TrapImagePlacementTypes",
"Trapping",
"UIColors",
"UITools",
"UndoModes",
"UpdateLinkOptions",
"UserInteractionLevels",
"VariableNumberingStyles",
"VariableScopes",
"VariableTypes",
"VersionCueSyncStatus",
"VersionState",
"VerticalAlignment",
"VerticalJustification",
"VerticallyRelativeTo",
"ViewDisplaySettings",
"ViewZoomStyle",
"WarichuAlignment",
"WatermarkHorizontalPositionEnum",
"WatermarkVerticalPositionEnum",
"WhenScalingOptions",
"XFLRasterizeFormatOptions",
"XMLElementLocation",
"XMLElementPosition",
"XMLExportUntaggedTablesFormat",
"XMLFileEncoding",
"XMLImportStyles",
"XMLTransformFile",
"ZoomOptions"];
var l = enums.length,
s = q.toString(), e, er, a;
while (l--) {
try {
e = $.global [enums[l]];
if (e.hasOwnProperty (s) && q === e[s]) {
a = e.reflect.properties;
a.pop();
a = (a.length < 2) ? "" : "\r[Possible " + enums[l]+ " Enumerations for " + n + "]:\r" + enums[l] + "." + a.join ("\r" + enums[l] + ".");
return enums[l] + "." + q.toString () + a;
catch (er) {};
return "???." + q.toString (); -
How to get spool along with e-mail or FAX
Hi,
I have a requirement where i have to produce a spool even i go for e-mail or FAX option when the script is triggered.
I am using a standard program where it is coded to have either of the option. i.e. either we have to go for a printer or e-mail or FAX.
Could any one suggest me how to get spool along with e-mail or FAX option.
Thanks in advance.Hi,
check this:-[http://help.sap.com/saphelp_nw04/helpdata/en/a5/28d3b9d26211d4b646006094192fe3/frameset.htm]
hope u'll get some idea.
Regards,
Sneha. -
since I upgraded to os 5.1 for my iPhone I can no longer type in reminders. Any suggestions how to get around having to use siri for reminders?
Unfortunately, I have a very similar problem. Since I upgraded to os 5.1 on my new iPhone 4S the reminders screen will not add new reminders or scroll up and down. What's more strange is the screen will still scroll side to side allowing access to the Completed list, and both the Completed list and Date functions work normally so this must be an upgrades glitch.
-
How to get pivot table by using dates
Hi,
How to get pivot table by using dates in column.
Below is the sample table and its value is given.
create table sample1
Order_DATE DATE,
order_CODE NUMBER,
Order_COUNT NUMBER
Insert into sample1 (Order_DATE,order_CODE,Order_COUNT) values (to_timestamp('30-SEP-12','DD-MON-RR HH.MI.SSXFF AM'),1,232);
Insert into sample1 (Order_DATE,order_CODE,Order_COUNT) values (to_timestamp('30-SEP-12','DD-MON-RR HH.MI.SSXFF AM'),2,935);
Insert into sample1 (Order_DATE,order_CODE,Order_COUNT) values (to_timestamp('30-SEP-12','DD-MON-RR HH.MI.SSXFF AM'),3,43);
Insert into sample1 (Order_DATE,order_CODE,Order_COUNT) values (to_timestamp('30-SEP-12','DD-MON-RR HH.MI.SSXFF AM'),4,5713);
Insert into sample1 (Order_DATE,order_CODE,Order_COUNT) values (to_timestamp('30-SEP-12','DD-MON-RR HH.MI.SSXFF AM'),5,11346);
Insert into sample1 (Order_DATE,order_CODE,Order_COUNT) values (to_timestamp('29-SEP-12','DD-MON-RR HH.MI.SSXFF AM'),1,368);
Insert into sample1 (Order_DATE,order_CODE,Order_COUNT) values (to_timestamp('29-SEP-12','DD-MON-RR HH.MI.SSXFF AM'),2,1380);
Insert into sample1 (Order_DATE,order_CODE,Order_COUNT) values (to_timestamp('29-SEP-12','DD-MON-RR HH.MI.SSXFF AM'),3,133);
Insert into sample1 (Order_DATE,order_CODE,Order_COUNT) values (to_timestamp('29-SEP-12','DD-MON-RR HH.MI.SSXFF AM'),4,7109);
Insert into sample1 (Order_DATE,order_CODE,Order_COUNT) values (to_timestamp('29-SEP-12','DD-MON-RR HH.MI.SSXFF AM'),5,14336);
select * from sample1;So how to get the data like below.
order_date
order_code 30-sep-12 29-sep-12
1 232 368
2 935 1380
3 43 133
4 5713 7109
5 11345 14336Using the extra data I inserted in my previous reply:select ORDER_CODE,
SUM(DECODE(extract (month from ORDER_DATE),1,ORDER_COUNT,0)) JAN,
SUM(DECODE(extract (month from ORDER_DATE),2,ORDER_COUNT,0)) FEB,
SUM(DECODE(extract (month from ORDER_DATE),3,ORDER_COUNT,0)) MAR,
SUM(DECODE(extract (month from ORDER_DATE),4,ORDER_COUNT,0)) APR,
SUM(DECODE(extract (month from ORDER_DATE),5,ORDER_COUNT,0)) MAY,
SUM(DECODE(extract (month from ORDER_DATE),6,ORDER_COUNT,0)) JUN,
SUM(DECODE(extract (month from ORDER_DATE),7,ORDER_COUNT,0)) JUL,
SUM(DECODE(extract (month from ORDER_DATE),8,ORDER_COUNT,0)) AUG,
SUM(DECODE(extract (month from ORDER_DATE),9,ORDER_COUNT,0)) SEP,
SUM(DECODE(extract (month from ORDER_DATE),10,ORDER_COUNT,0)) OCT,
SUM(DECODE(extract (month from ORDER_DATE),11,ORDER_COUNT,0)) NOV,
SUM(DECODE(extract (month from ORDER_DATE),12,ORDER_COUNT,0)) DEC
from SAMPLE1
where trunc(order_date, 'YY') = trunc(sysdate, 'YY')
group by order_code
order by order_code;
ORDER_CODE JAN FEB MAR APR MAY JUN JUL AUG SEP OCT NOV DEC
1 0 0 0 0 0 0 0 0 600 600 0 0
2 0 0 0 0 0 0 0 0 2315 2315 0 0
3 0 0 0 0 0 0 0 0 176 176 0 0
4 0 0 0 0 0 0 0 0 12822 12822 0 0
5 0 0 0 0 0 0 0 0 25682 25682 0 0Now a bit of explanation.
1) Whenever you pivot rows to columns, no matter what version of Oracle and no matter what method you use, you have to decide in advance how many columns you are going to have and what the names of the columns are. This is a requirement of the SQL standard.
2) I use the WHERE clause to get just the data for this year
3) With EXTRACT, I get just the month without the year.
4) Using DECODE, I put every month's data into the correct column
5) Once I do all that, I can just GROUP BY order_code while SUMming all the data for each month. -
Help , How to get data from database using recordset with UI API
I want to get a data from database
when I want to create recordset i notice that UI API didn't has record set
so I created recordset using DI API (SAPbobscom.recordset and SAPbobscom.company)
======================================================
Dim oCompanyUI As SAPbouiCOM.Company <<UI API
Dim oRecSet As New SAPbobsCOM.Recordset << DI API
Dim oCompanyDI As New SAPbobsCOM.Company << DI API
'=====================================================
oCompanyDI.Connect
Set oRecSet = oCompanyDI.GetBusinessObject(BoRecordset)
oRecSet.DoQuery ("SELECT T0.CardCode, T0.CardName FROM OCRD T0")
SBO_Application.MessageBox oRecSet.Fields.Item(1).Value
======================================================
but I got an error it said "you are not connected to company"
I'm really don't have an idea about how to get a data from using UI API (exp I want to get a date or costumer code)
can someone help me please, I really need it
Thanksyou need a single sign on
Dim oDICompany As SAPbobsCOM.Company
Dim sCookie As String
Dim sConnStr As String
Dim ret As Integer
oDICompany = New SAPbobsCOM.Company
sCookie = oDICompany.GetContextCookie
sConnStr = SBO_Application.Company.GetConnectionContext(sCookie)
If oDICompany.Connected Then
oDICompany.Disconnect()
End If
ret = oDICompany.SetSboLoginContext(sConnStr)
If Not ret = 0 Then
SBO_Application.MessageBox("set Login Context failed!")
Exit Sub
End If
ret = oDICompany.Connect()
If Not ret = 0 Then
SBO_Application.MessageBox("Company Connect failed!")
End If
Maybe you are looking for
-
I use Mac Messages app for iMessage, SMS, AIM, & Google Chat. When I attempt to send a new AIM message it defaults to sending an iMessage. Is there a way around this? I have my preferences set to save messages history in my Mac Messages app and the
-
How to stop record scrolling using up and down arrow key in forms
Hi , how we can restrict the record navigation using up & down arrow key... Thanks & Regards. vvm
-
Adobe fail when open .pdf documents with IE browser
It happened when I open .pdf with IE browser, IE will freezes. Who know how to solve ? I used IE 7.0 and adobe reader 8.x here picture: http://freedictionarysoftware.info/images/error.JPG
-
i wonder which is better in terms of performance to install windows through Boot camp or through a vitual machine such like parallels ? thanks in advance for any guidance in this concern
-
Problems with "Printers & Scanners" preference pane under Mavericks
Since installing OS X Mavericks I can no longer print to our WiFi enabled Epson WF-7515 network printer, and attempting to access the "Printers & Scanners" preference pane in System Preferences either produces a Preferences Error which reads "Could n