How to handle data quality by using rules defined outside SAP MDM

Hi All,
I have a requirement: There are number of cleansing rules defined in different quality product. I need to integrate that quality tool with SAP MDM. Is it possible to do this? I guess with the help of Java API's!!!!
Can I use MDM enrichment controller here? If yes, than how to use it.
thx,
R.n

Hi R.n
The MDM Enrichment Framework is certainly the best way to answer your requirements.
Please see the Enrichment Architecture guide at MDM Documentation Center http://service.sap.com/installMDM
A recorded demo session at SDS Community Page is available to present such system.
Regards
Orit

Similar Messages

How to get data from Oracle using Native SQL in SAP.. Problem with date

Hi Masters.
I'm trying to get data from an Oracle DB. I was able to connect to Oracle using tcode DBCO. The connetion works fine
I wrote this code and it works fine without the statement of where date > '01-09-2010'
But i need that statement on the select. I read a lot about this issue, but no answer.
My code is (this code is in SAP ECC 6.0)
DATA: BEGIN OF datos OCCURS 0,
      id_numeric(10),
      component_name(40),
      comuna(10),
      record_id(10),
      status,
      sampled_date(10),
      END OF datos.
DATA: c TYPE cursor.
EXEC SQL.
connect to 'LIM' as 'MYDB'
ENDEXEC.
EXEC SQL.
SET CONNECTION 'MYDB'
ENDEXEC.
EXEC SQL PERFORMING loop_output.
SELECT ID_NUMERIC, COMPONENT_NAME, COMUNA, RECORD_ID, STATUS, SAMPLED_DATE
into :datos from lims.SAMP_TEST_RESULT
where     date > '01-09-2010'
ENDEXEC.
EXEC SQL.
disconnect 'MYDB'
ENDEXEC.
How can i get the data from that date?? If i delete the where statemet, the program works well, it takes 30 mins and show all the data, I just need the data from that date.
Any help
Regards

Please refer the example in this link which deals with Oracle date format.
You can finnd a command DECODE which is used for date formats. If you have a look at whole theory then you will get an idea.
Link:[Bulk insert SQL command to transfer data from SAP to Oracle|http://sap.ittoolbox.com/groups/technical-functional/sap-dev/bulk-insert-sql-command-to-transfer-data-from-sap-to-oracle-cl_sql_connection-3780804]

How to handle user exits while using BAPI

HI experts can any one help me on how to handle user exits while using BAPI. Do we need to handle it explicitly or standard BAPI will take care of it??.
Regards,
Hari Krishna

If you have added some fields using append structures for screen enhancements, then you have to use appropriate user exits to fill these data while calling BAPI. Some BAPIs have EXTENSION structures to fill the custom data which can be processed using user exists or enhancements.
Regards
Vinod

Model of how APEX handles data (values)?

Reference {thread:id=2486655}
I'm trying to get a model of how APEX handles data (values). There are several places(?) that data (values) can exist. Or so it seems. I'm trying to understand how these work -- to put all the pieces together.
Question:
A) Where data can be?
1) In the database
2) In the session
3) Rendered -- and hence displayed on the screen, if a displayed value -- but not in the session
4) In perhaps(?) some working memory pool(?) but different from the page rendered values I see on the screen?
5) Other?
Why do I think this is relevant?
Question:
B) If there are rendered values and session values different from the rendered values, then when code executes, which of these values (rendered or session) is it executing against?
And maybe the answer is, "You don't understand what's going on." Yes, "Exactly!" Hence the question.
Best wishes,
Howard

Howard (DBA in Training) wrote:
I'm putting this together now. For example:
I set the value of a Page Item (say, :P2_DATA) to "BEFORE" in a Before Region process and change it to "AFTER" in an After Region Process. 'BEFORE' was displayed on the screen but 'AFTER' was in the session state. So I see that PL/SQL changes these values in the session state. But it doesn't "go back" to change the HTML after the region has been rendered -- hence we see BEFORE shown on the screen. (I'll have to think about what a Dynamic Action does.)
Also, if a page item has a default value, say 'DEFAULT' then that value doesn't get into the session state. At least, not with my current settings. Oh, that explains a lot of confusion!! I suppose there's a logical reason for this but who would expect default values to be differently from other PL/SQL operations on the item?
Questions:
1) So why does a default value not get put into the session state?Several reasons, among them:
*1. When/why is the value required?* Region items (and thus their source and default values) are rendered in region/item sequence order. The item's source/default value would therefore not be available in session state until it's rendering point. This is frequently later in page show processing than the value is actually required, such as the common use case of including a data value in the page or region title. Setting the value in a Before Header/Regions computation or process makes it available as required before the item is actually rendered.
*2. The rendered page might not be submitted.* Default values are typically set when a page will create a new row. Consider the situation where the user clicks a "Create" button and is presented with an order entry form containing several default values. They then decide they don't want to create a new order after all, and navigate away from the form page via some mechanism that uses a redirect rather than a submit (such as a default "Cancel" button). This means that no page submit processing is performed, and generally that no session state management is performed. If the default values were set in session state, the order entry page would contain the default values for the non-existent order despite the user never submitting it. This may have unwanted side-effects if these values are referenced elsewhere in the application, and therefore would require extra session state management to be built into the application.
*3. A rendered item might not be submitted with the page.* Per the HTML specification, the values of disabled controls unchecked checkboxes are not POSTed on page submit. Consider a situation where a checkbox item is set with several default values, but the application requires that the checkboxes be cleared and disabled by a dynamic action if the user chooses certain options from a select list. In this case, on page submission no values are submitted into session state for the checkbox item. If the defaults had been set in session state, then the application would be in an inconsistent state, with the user-selected option indicating that none of the checkboxes were checked, but with session state holding values showing that they were. This would require additional processing to ensure that the application's state was consistent before saving it to the database.<sup>1</sup>
2 & 3 are particularly significant in basic wizard-generated applications. Doing things in this way, the wizard-generated DML and navigation "just works", without the need for additional session state management.
2) Is there a Page Item setting that causes the default value to be saved to the session state?No. Hopefully the explanations above provide sufficient reason to show why this is genearlly not desirable. On the rare occasions when it is required, set the session state value using a computation or process.
<sup>1</sup> There are other reasons—mainly security related—that make it good practice to perform such checks in more complex and internet-facing applications anyway.

How to upload data into IT0000 using ABAP-HR program

Hello,
I'm required to upload data into multiple infotypes [IT000, 0001, 0002, etc] using single input text file. Can anyone able to guide me, how to upload data into IT0000 using ABAP program ?
Thanks in advance.
Regards
Prabhakar.
Message was edited by:
        Prabhakara Muthyal

Example code for HR_MAINTAIN_MASTERDATA to COPY IT0002
DATA: INT_0002_FINAL TYPE STANDARD TABLE OF PA0002 WITH HEADER LINE.
DATA: VALUES        LIKE PPROP OCCURS 10 WITH HEADER LINE,
RETURN        LIKE BAPIRETURN1,.
LOOP AT INT_0002_FINAL.
      VALUES-INFTY = '0002'.
      VALUES-FNAME = 'P0002-PERNR'.
      VALUES-FVAL = INT_0002_FINAL-PERNR.
      APPEND VALUES.
      VALUES-INFTY = '0002'.
      VALUES-FNAME = 'P0002-BEGDA'.
      VALUES-FVAL = INT_0002_FINAL-BEGDA.
      APPEND VALUES.
      VALUES-INFTY = '0002'.
      VALUES-FNAME = 'P0002-ENDDA'.
      VALUES-FVAL = INT_0002_FINAL-ENDDA.
      APPEND VALUES.
      VALUES-INFTY = '0002'.
      VALUES-FNAME = 'P0002-nachn'.
      VALUES-FVAL = INT_0002_FINAL-NACHN.
      APPEND VALUES.
      VALUES-INFTY = '0002'.
      VALUES-FNAME = 'P0002-gblnd'.
      VALUES-FVAL = INT_0002_FINAL-GBLND.
      APPEND VALUES.
      VALUES-INFTY = '0002'.
      VALUES-FNAME = 'P0002-vorna'.
      VALUES-FVAL = INT_0002_FINAL-VORNA.
      APPEND VALUES.
      VALUES-INFTY = '0002'.
      VALUES-FNAME = 'P0002-rufnm'.
      VALUES-FVAL = INT_0002_FINAL-RUFNM.
      APPEND VALUES.
      VALUES-INFTY = '0002'.
      VALUES-FNAME = 'P0002-name2'.
      VALUES-FVAL = INT_0002_FINAL-NAME2.
      APPEND VALUES.
      VALUES-INFTY = '0002'.
      VALUES-FNAME = 'P0002-inits'.
      VALUES-FVAL = INT_0002_FINAL-INITS.
      APPEND VALUES.
      VALUES-INFTY = '0002'.
      VALUES-FNAME = 'P0002-famst'.
      VALUES-FVAL = INT_0002_FINAL-FAMST.
      APPEND VALUES.
      VALUES-INFTY = '0002'.
      VALUES-FNAME = 'P0002-gbdat'.
      VALUES-FVAL = INT_0002_FINAL-GBDAT.
      APPEND VALUES.
      VALUES-INFTY = '0002'.
      VALUES-FNAME = 'P0002-sprsl'.
      VALUES-FVAL = INT_0002_FINAL-SPRSL.
      APPEND VALUES.
      VALUES-INFTY = '0002'.
      VALUES-FNAME = 'P0002-anzkd'.
      VALUES-FVAL = INT_0002_FINAL-ANZKD.
      APPEND VALUES.
      VALUES-INFTY = '0002'.
      VALUES-FNAME = 'P0002-natio'.
      VALUES-FVAL = INT_0002_FINAL-NATIO.
      APPEND VALUES.
* maintain master data
      CALL FUNCTION 'HR_MAINTAIN_MASTERDATA'
        EXPORTING
          PERNR           = INT_0002_FINAL-PERNR
          ACTIO           = 'COP'
          BEGDA           = INT_0002_FINAL-BEGDA
*         ENDDA           = INT_0002_FINAL-ENDDA
          SUBTY           = SPACE
          NO_ENQUEUE      = SPACE
          DIALOG_MODE        = '0'
          TCLAS              = 'A'
        IMPORTING
          RETURN1         = RETURN
        TABLES
          PROPOSED_VALUES = VALUES
*         MODIFIED_KEYS   =
        EXCEPTIONS
          OTHERS          = 1.
      IF RETURN IS INITIAL.
        WRITE:/' Done....'.
      ELSE.
        WRITE:/   RETURN-ID, RETURN-TYPE, RETURN-NUMBER, RETURN-MESSAGE_V1, RETURN-MESSAGE_V2, RETURN-MESSAGE_V3, RETURN-MESSAGE_V4.
      ENDIF.
      CLEAR VALUES.
      REFRESH VALUES.
    ENDLOOP.

How to avoid data repetation when using select statements with innerjoin

how to avoid data repetation when using select statements with innerjoin.
thanks in advance,
satheesh

you can use a query like this...
SELECT DISTINCT
         frg~prc_group1                  "Product Group 1
         frg~prc_group2                  "Product Group 2
         frg~prc_group3                  "Product Group 3
         frg~prc_group4                  "Product Group 4
         frg~prc_group5                  "Product Group 5
         prc~product_id                  "Product ID
         txt~short_text                  "Product Description
UP TO 10 ROWS
INTO TABLE l_i_data
FROM
Joining CRMM_PR_SALESG and
COMM_PR_FRG_ROD
crmm_pr_salesg AS frg
INNER JOIN comm_pr_frg_rod AS prd
ON frgfrg_guid = prdfragment_guid
Joining COMM_PRODUCT and
COMM_PR_FRG_ROD
INNER JOIN comm_product AS prc
ON prdproduct_guid = prcproduct_guid
Joining COMM_PRSHTEXT and
COMM_PR_FRG_ROD
INNER JOIN comm_prshtext AS txt
ON prdproduct_guid = txtproduct_guid
WHERE frg~prc_group1 IN r_zprc_group1
   AND frg~prc_group2 IN r_zprc_group2
   AND frg~prc_group3 IN r_zprc_group3
   AND frg~prc_group4 IN r_zprc_group4
   AND frg~prc_group5 IN r_zprc_group5.
reward it it helps
Edited by: Apan Kumar Motilal on Jun 24, 2008 1:57 PM

Any one used quick sizer for SAP MDM?

Any one used quick sizer for SAP MDM?

Hi Subin,
Quicksizer is SAP's online sizing tool.
The sizing process uses the web-based Quick Sizer tool, which calculates SAPS requirements based on throughput numbers, and the number of users working with the different SAP Business Suite components in a hardware and database independent format. You can find further information about the SAP sizing process at the following location
http://service.sap.com/sizing
After obtaining the results of a Quick Sizer project, work with the SAP Competency Center of your specific hardware vendor for sizing and architecture services as you would for physical environments.
For further details please go through this:
http://www.sdn.sap.com/irj/sdn/performance-analysis
Thanks,
Ravi

How to do data quality check on XI?

Hi XI guru,
I am working on a project, our architect want XI to perform some data quality check to make sure the message contains correct data in future processing. Is there any existing solution or walk arround for XI to perform the data quality check?
For example: if field A and field B is not exist, then XI need to send a email to remind someone who support this interface.
For this kind of scenario, is that possible for XI to handle? What's the best option for XI?

Hi,
check all the condition in UDF and based on the condition result raise an alert.
follow below steps:
Michal Krawczyk
The specified item was not found.
Configuration steps are: go to transaction ALRTCATDEF
1) Define Alert Category
2) Create container elements which are used for holding an error messages.
3) Recipient Determination.
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/alert%2bconfiguration%2bin%2bxi
Alert can be triggered in different ways.
1) Triggering by Calling a Function Module Directly.
Triggering XI Alerts from a User Defined Function
chirag

How to handle data that got from SAP by Webservice?

Hi, Gurus.
I am working on IFbA with ABAP and Adobe LiveCycle Designer.
I've developed a function module in R/3 system and created webservice, connected the WSDL address to the form. The problem is how can i handle data that got from SAP by Webservice?
It's Ok if i bind the dataconnection node to the form element, but how can i handle data without binding to the form element? I mean that how can i use the data retrieved from Webserivce in the Javascript, please give me some sample code or script method.
Thanks.

Hi Yang,
If you are using Web Service, then the binding will be done automatically.
It can't grow automatically, what else should i do to achieve this?
1.Select the table(make sure you are not selecting subform) in Hierarchy view
2. Under table select the Row which is having the required fileds for data
3. In the Binding of that row, check the checkbox "Repeat Row for each item data" and under that check the Min Count which will set the default row **** to 1
Regards,
Sachin

How to install Data Quality Client on Windows when the Servers are on AIX

I have installed ODI, ODI DP and DQ Servers on an AIX machine. However, Oracle Data Quality Client is an Windows only component. How do i install it? When I use the software of ODI, for Windows platform,I get the following error when i try to connect.
An unexpected error has occurred. Please refer this information to Trillium Software support.
Description: invalid command name "::com::avellino::metabase::authenticate"
File: ..\include\ExecutionContextHandler.h
Line: 326
Stack:
invalid command name "::com::avellino::metabase::authenticate"
while executing
"::com::avellino::metabase::authenticate madmin 303f4450-8ce1-436f-9a16-54fae4d8a4cf ::com::trilliumsoftware::tssauto::pwd_answer"
invoked from within
"remote0 read"

Hi,
We are hitting same issue (Metabase Manager from windows) to ODQ server on Solaris and event viewer in windows server showing exactly same message .
Any luck or pointer ?
Atul Kumar
http://onlineAppsDBA.com

How to Export data from webdynpro using Jecxcel

Hi ,
Can anyone help me how to export data from web dynpro using Jexcel. kindly send me the related links.
Thanks

Hi Sandeep,
Have you refered in the blogs?
U can find may more document related to this.the below blog helps u in
Exporting Data from Web Dynpro in Different Formats Using Open Source (POI, JExcel, iText) APIu2019s.
https://www.sdn.sap.com/irj/sdn/index?rid=/library/uuid/b030e7fb-2662-2b10-0dab-c4aa52c3550b
Regards
Supraja

How to upload data for me01 using lsmw recording method

*dear expert please tell me the complete procedure for how to upload data in me01 transaction using lsmw recording method.
Moderator Message: Duplicate post locked.
Edited by: Vinod Kumar on May 8, 2011 7:56 PM

Hi,
To be honest I don't understand your question. When You execute LSMW and create project, then all steps are shown in a very clear way with good description. With which one you have problems?
Best regards
Marcin Cholewczuk

How much internet data does FaceTime use on mac

i want to know how much internet data facetime uses on mac

A five minute FaceTime call, over 3G, will use, give or take, about 15MB's of data.

How to maintain data in scrren using ztable

how to update data in ztable by using program...
plz send a model problem...
i m creating screen(SE51) with ztable fields how to maintain data in that screen. also i m creating transaction for that screen..

Hi
There sample programes given SAP itself.
Go to SE80 and select package as SDWA and press enter
You will see whole list of screen sample programs, you can modify the code little bit to suit the tables u want to update.
Regards
Balaji

How to pass data to a used DC.

Hi,
I have a Component which re-uses another component, how can I pass data to the used component?
Do I need to create an event?
Brayden.

Hi Brayden,
You don't need to create an event to pass data to a used component. You can simply map the interface controller's context of the used component. Just go to the properties tab of parent component and add the used components interface controller as a "required controller". This will then allow you to map data between them.
Best Regards,
Austin

How to handle data quality by using rules defined outside SAP MDM

Similar Messages

Maybe you are looking for