How to hide/show a column in reports 10g according to the parameter value

Hi,
I want to hide a column in the report according to the parameter value, is it possible?
For example, there is a parameter called P_TYPE. I want to hide a column called 'BALANCE' if the P_TYPE=0.
This column is not the last one in the table, so if it is hide then that empty space should be occupied by next column.
Is it possible means please explain me how to do it?
Thanks in advance,
SAN

Create a format trigger (for both the header and the column item) that returns False on you condition.
Set the horizontal elasticity to Contract (for both the header and the column item).
Sometimes Contract doesn't work. Try Variable in that case. This has the disadvantage that the field can also expand.

Similar Messages

How to Hide/show the columns data while doing Drill down or drill up

Hi ,
How to Hide/show the columns data while doing Drill down or drill up in webi report .
Does it possible BO 3.1 version ?
Please suggest me on this.
Thanks & Regards
Venkat

While that is not there yet, you can make use of the show when empty yes/no in combination with alerters.
So I have an alerter applied to every cell of the table.
When a condition is true (say I drilled down) I just put = "" in every cell, emptying the table,
because its now empty and doesn't need to show, it wont.
For the detail table I use the opposite, so when you drilled down it becomes visible...
Hope this helps all that do not have 40 yet
Good luck,
Marianne

Hide/show a column in a report

Hi,
I'm actually looking for a solution to hide/show a column in a report (matrix form)in function of a parameter..
Using the conditionnal formating propertie to hide a column (return false) works, but the colmuns in the right side don't move.. It's not very pretty..
An other way could be to change the elasticity property of a column, and replace the data by "", but apparently, we can't access to this property by the srw command.
I really need a solution, else I'll have to produce as many reports as I've to hide columns...
Thanks a lot
Best regards..
DAvid
null

Hi,
I use 'decode' in sql statement. If your sql statement is applicable to this,you may use it. So you can choose which columns you want to use and also you can concatanate columns to make them one column.

How to hide Group Tree in Crystal Report Server.

Hi all visitors
i have created one crystal report and my report use group to summary the amount of each day.
after i use group to summary, i used text box cover the group. so my group can't click anything.
After that i upload my report to crystal report server, when i viewed my report and when i click on Group Tree, it will show the list of group (group date in crystal report) and it also can click. I don't want to show the Group Tree in Crystal Report Server.
Anybody know how to hide group tree in crystal report server?
Best Regards,

Are you talking custom application, or infoview? If it is custom app, you would have to look at the setToolPanelViewType method. if its infoview, no direct way to change this that i know of.

How to hide/show dashboards for user/groups

Hi,
Please help on how to hide/show dashboard menu/sub menu to users/groups based on their profile settings.
thanks in advance.
regards,
kumar.

Hi Jinu,
1) Do some or all of those subreports span multiple pages?
2) Do each of the Subreports start on a new page?
If yes, for both, then here's what you need to do:
1) Create a formula (@True) with this code:
shared booleanvar SetStatus:= True
2) Create another formula (@False) with this code:
shared booleanvar SetStatus:= False
Drag and drop the @True formula on the details sections for which you want the Page Footer to be suppressed.
Similarly, drop the @False formula on the details sections for which you want the Page Footer to show up.
Then, go to the Section Expert > Select Page Footer c > Click the formula button beside Suppress and use this code:
shared booleanvar SetStatus;
-Abhilash

OS 10.10 how to hide/show a folder with a password using terminal

In Yosemite 10.10.2 Terminal Can you please tell me how to hide/show with a password then show again on already existing folder created on a system drive and also an external drive. Please provide the path text to folder name "wbfiles". Thank you Winwoodb

You can drag it from one place on a drive to another. If you are moving it from one drive to another then it copies it. If you are moving it on the same drive and are getting that message then not being able to move the folder is the least of your problems. Free up space immediately because your computer is about to crash and probably lose files. Then you'll have lots of space.

How to hide/show chart at runtime

Hi All,
Can anyone help me in how to Hide/Show a chart at runtime.
Thanks & Regards
K.Srinivas

Hi
THere is simple way of doing it. Follow the steps below -
1. Create 'Radio Button' in another form.
2. Create 2 buttons in it e.g - 1=Show & 2=Hide.
3. THen there is option as 'Visibility Condition' on Chart 'Properties'.
4. Write condition as - IF('Form Tech name'@ST1=="1",true,false)
here ST1 is tech name of the radio button you can select it in formula option.
5. Then make 1 or 2 as default value.
You can change radio button at run time & you can show or hide the chart.
Let me know if you have any issue.
Regards
Sandeep

How do you "Unsort" a column to get it back to the way it was when you opened it?

How do you "Unsort" a column to get it back to the way it was when you opened it?
I like to sort by price or alphabetical etc but then I want to return the cells to where they were and I can't figure out a way to do that.
For instance, the rows that don't matter so much like the ones that just describe what date is the follow are now all together and I want it back the way it was when I opened the document without losing any changes I've met to other things in the doc since I sorted.
Can anyone help with this?
Thanks.
Tim

Hi fl2,
Adding to replies from Wayne and Barry. After you open that Numbers document, insert another column into a table before you sort it. The column can be anywhere in that table. Here is Column A (labelled "Original") that I inserted. It has numbers in sequence (1, 2, 3...)
As Barry said, these must be numbers, not the results of a formula.
Now you can sort by any column to your heart's delight and always go back to the original order by sorting that table by column A.
Regards,
Ian.

How about a "Show Incompatible App Updates" option same as in the Mac App Store?

How about a “Show Incompatible App Updates” option same as in the Mac App Store?
I want un-installable app updates from being displayed in Updates. These updates require iOS 6.0 or later and cannot be installed on my original iPad that still runs 5.1.1 and cannot use 6.0.

We are not employees or representatives of Apple. We are just users like yourself. Your idea does seem interesting though. Send feed back to Apple here
http://www.apple.com/feedback/ipad.html

Parameter weirdness: Report not using user selected parameter value

I am writing my first report and cannot for the life of me figure out how to deal with this issue.
When I call a report and pass the parameters in, it appears that the user cannot then change the parameter values and run the report again even though the parameters are displayed. When user hits run report, the values revert to what was passed in by original
call.
Scenario
Report B has Parameter Period : Month, Quarter, Year displayed in a drop down list.
Report A calls Report B and passes it the parameter: Quarter.
Report B loads. User now changes parameter to Year via the drop down parameter list and hits Run Report.
Instead of loading the report with user selected value (Year), it reverts back to the parameter it was called with, Quarter.
I have tried changing the refresh option on the parameter to always, but no joy.
The only way that seems to work is to put textboxes on the report to change the parameter.
How can I stop this behaviour, and use the users new selection.
This should be really straight forward, and its driving me nuts that its not allowing the user to change the parameters
Any help would be much appreciated.
Thanks Jon

Hi Jon,
Did you use SSRS 2012? Based on my test, the issue is occurred in SSRS 2012 Business Intelligence Development Studio (BIDS). When we deploy the report to report server, it will disappear.
In this situation, we can add another duplicate parameter to work around this issue. Please add two parameters in the report, and then hide one of the parameter. We can pass the parameter value to the hide parameter. If we want to select other values, we
can change the visible parameter values.
Alternatively, I recommend you that submit this suggestion at
https://connect.microsoft.com/SQLServer/. If the suggestion mentioned by customers for many times, the product team may consider to add the feature in the next SQL Server version. Your feedback is valuable for us to improve our products and increase the
level of service provided.
Regards,
Alisa Tang
Alisa Tang
TechNet Community Support

Hide multiple rows in a dynamic table based on the row value.

Hi,
I need to hide multiple rows in a dynamic table based on the specific value of that row.
I cant find the right expression to do that.
please help

Go to the Row Properties, and in the Visibility tab, you have "Show or hide based on an expression". You can use this to write an expression that resolves to true if the row should be hidden, false otherwise.
Additionally, in the Matrix properties you should take a look at the filters section, perhaps you can achieve what you wish to achieve through there by removing the unnecessary rows instead of just hiding them.
It's only so much I can help you with the limited information. If you require further help, please provide us with more information such as what data are you displaying, what's the criteria to hiding rows, etc...
Regards
Andrew Borg Cardona

How to filter certificate templates in Certificate Authority snap-in with the correct values

How to filter certificate templates in Certificate Authority snap-in with the correct values
I have a 2012 R2 server running Microsoft Certificate Authority snap-in.
I want to do a filter on a specific Certificate Template which i know exists in the 'Issued Certificates' folder.
All the documentation i can find seems to suggest i copy the certificate name and use this in the View Filter.
1). I add the 'Certificate Template' option into the Field drop-down.
2). I leave the Operation as the '=' symbol
3). I paste in just the name of the template in question. for example: 'my computers'
The search results always come back blank 'There are no items to show in this view.' even when i know there are many instances of this template. I've tried on a win 2008 server and same issue.
Is there a correct value to enter for the Certificate Template name?
Can this be done easier using certutil commands?
When i run the certutil tool i can confirm i have several issued templates. Certutil -catemplates -v > c:\mytemplate_log.csv
Anybody know what i'm doing wrong?
I seem to be getting nowhere with this one.

> But its important you are using the template name, not the display name
this is incorrect. OIDs are mapped to *display name*, not common name (it is true for all templates except Machine template). That is, in order to translate template name to a corresponding OID, you need to use certificate template's display name. And, IIRC,
template name in the filter can be used only for V1 templates. For V2 and higher, OID must be used.
My weblog: en-us.sysadmins.lv
PowerShell PKI Module: pspki.codeplex.com
PowerShell Cmdlet Help Editor pscmdlethelpeditor.codeplex.com
Check out new: SSL Certificate Verifier
Check out new:
PowerShell FCIV tool.

Please..how to instal libero mail on mi Ipad. I need the parameter for send and receive mail..Thanks

Please..how to instal "libero" mail on my Ipad. I need the parameter for send and receive mail..Thanks

FYI: POP will by default, delete messages from the server after downloading them (This applies to most pop clients, computer or mobile). POP is old tech and is not recommended if IMAP or Exchange are available. The default when setting up a g-mail type account is IMAP. Full synchronization with the server. You may also be able to set it up as an Exchange account, allowing for push e-mail and sync of calendars and contacts as well. See the Gmail help pages for instructions.

How to hide or add columns to a linked report in SSRS 2014

Hai All,
I have a report deployed on a server. And I created a linked report to it into another folder. Now I can actually manipulate on parameters of the linked report through Report manager but I have to hide some columns when displaying the linked report. Is there
a way to show or hide the columns on the Linked report.
Regards,
Rajesh

Hi,
This is a SQL report designing issue, with report builder we should be able to change the visibility of a column. Reports that deployed to
report manager can be edit by report builder, we may save it after edited.
Please check the article below:
Column Visibility Dialog Box (Report Builder)
https://msdn.microsoft.com/en-us/library/dd207071.aspx
Regards,
Yan Li
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

How can I show groupped columns inisde Diadem report ?

Hi,
I am trying to show some values inside a Diadem report. I must show then in a similar way as "groupped columns" inside Excel, comparing different values in columns, just one columns next to the other one, but I do not know how I can manage it inside Diadem. With "bar" and outlined bars, all the columns are located at the same X point, so it is not the same as in Excel. How could I compare values of differet columns?
Thanks for your collaboration

Hi koniker,
Do you mean Y offset? If so, you can do it, but it's not a built-in feature, so again, you would have to shift the Y values up or down by Delta with the FormulaCalculator prior to graphing.
Normally multiple values occurring at the same X axis point are displayed either as lines and/or symbols. Bar graphs come up occasionally in DIAdem, but they're much more important for business graphing needs, thus the strong support of them in Excel.
What's your use-case? Are bar graphs the only acceptable choice? I can create and send you VBScript code to shift the bars either in the X direction or the Y direction, as you wish, if that's the optimal diplay. It just won't be a built-in feature.
Regards,
Brad Turpin
DIAdem Product Support Engineer
National Instruments

How to hide/show a column in reports 10g according to the parameter value

Similar Messages

Maybe you are looking for