How to monitor SMQ1 and SMQ2

Hi Guru's,
is there any standard way to monitor SMQ1 and SMQ2, like i would like to know any std way to trigger email alert if the queue goes beyond 500 in number.
Vinay

Hi there,
This should be possible through Business Process Monitoring in solution manager
http://service.sap.com/bpm > Media Library > Technical Information here you can find the setup guides.
Mark

Similar Messages

Generation of Alerts for errors in SMQ1 and SMQ2

Dear Experts,
When messages get stuck in queue (SMQ1 / SMQ2) due to some error, we donu2019t get any alert notification (E Mail) from system. Normally we get below mentioned errors in SMQ1 or SMQ2.
1. Permanent error in BPE processing.
2. Error while accessing table.
Can you please suggest how do we generate alert notifications for the above errors in SMQ1 and SMQ2.
Thanks
Dhwani Kamdar

If u have CCMS configured for your landscape, then it could be possible. Else its not possible in my opinion.
http://help.sap.com/saphelp_nw04/helpdata/en/8b/ceea3b31aac554e10000000a114084/frameset.htm
Regards,
Prateek

Role of SMQ1 and SMQ2

Hi,
What is the use of SMQ1 and SMQ2 in the LO.
can some one please elaborate.

Hi,
SMQ1 u2013 qRFC Monitor for the outbound queue You use this transaction to monitor the status of the LUWs in the outbound queue and restart any hanging queues manually.
SMQ2 u2013 qRFC Monitor for the inbound queue. You use this transaction to monitor the status of the LUWs in the outbound queue.
Check it
http://help.sap.com/saphelp_nw04/helpdata/en/76/e12041c877f623e10000000a155106/content.htm
Thanks
Reddy

SMQ1 and SMQ2?

Generally where smq1(out bound queuw) and smq2(inbound queue) is used?

Hi Reddy,
SMQ1 - qRFC Monitor for the outbound queue. You use this transaction to monitor the status of the LUWs in the outbound queue and restart any hanging queues manually.
SMQ2 - qRFC Monitor for the inbound queue. You use this transaction to monitor the status of the LUWs in the outbound queue.
Check these links for more Information,
Note 380078 - FAQ: BW delta queue (RSA7): Questions and answers
SMQ1 & SMQ2
http://help.sap.com/saphelp_erp2005vp/helpdata/en/15/0eff40e39ba854e10000000a1550b0/frameset.htm
Outbound Queue Administration
http://help.sap.com/saphelp_erp2005vp/helpdata/en/4c/cf5c3c3b067331e10000000a114084/frameset.htm
http://help.sap.com/saphelp_erp2005vp/helpdata/en/e5/de5f3cabde6d6fe10000000a114084/frameset.htm
http://help.sap.com/saphelp_erp2005vp/helpdata/en/76/e12041c877f623e10000000a155106/frameset.htm
Thanks,
Sudhakar.

SMQ1 and SMQ2 queues stuck

Hi All,
We are using ISU and CRM system for Retail business, Always work flows and lot of business transactions will perform in those systems and replications will happen in both systems.
Due to this reason lot of entries are present in SMQ1, SMQ2 and SM58 will present. We are continuously monitoring though some times some entries are are found in sysfail status. due to this lot of entries are piled up and queues becomes very high amount.
As a work around, If we unlock the queue ( sysfail entry ) two to three times the entry will go and the remaining entries will start move.
Currently our requirement is can we do this kind of this as automated ? I mean as per conditions it will unlock the queues automatically ?
Please suggest me in this case.
Thanks in advance.
Pavan.

Hi Dustin,
Thanks for your reply. I had gone through the mentioned notes and say about it is not recommended to use regular basis. Here our requirement is need to check the sysfail entries in the queue. Need to unlock the queue twice or thrice to re-process the entry. If any data issue our CRM middle ware team can handle.
The major purpose is to unlock the queue entries which can re-process automatically without manual correction.
I like to proceed with Deepanshu suggestion to check with ABAPer. before that I need to check with our CRM middle ware team to get the list of error which can process through unlocking the queue.
Will keep you posted the updates. Thanks a lot for your time and response.
Thanks,
Pavan.

Queues stuck in SMQ1 and SMQ2

Hi,
In CRM Middleware, I am trying to do some Master Data upload of Sales Orders from CRM to R/3 but a queue MCEX11 gets stuck on the R/3 side with 1 entry and status NOSEND
Can you please tellme how to get rid of this? Also how can i avoid distribution locks on a document.
On the CRM side also certain queues were stuck in the outbound SMQ1 with status NOSEND. How to process these queues manually?
I checked note 431345 and other related notes also. Would appreciate if someone can help me on this.
Thanks.
Rgds
Priyanka

Hi Priyanka,
To clear the no send status entry, go to R3AS, select the object say for BP (Bupa_main) press enter and then execute, then open R3AM1 enter object name as Bupa_main and select Running and done and execute.
Now you can open SMQ2 and click on each entry with nosend status and then click on activate queue in the top toolbar, this shld change the status to running and then click on refresh.
The following is the list of Queue extensions that are used in CRM, all the queues start with these extensions:
<b>Outbound queues</b>
CDB*     Start queues for loads CRM -> CDB
CRM_SITE*     Load queues for Mobile Clients
CSA*     Send queues of CRM Server Applications
EXT*     Start queues for loads CRM -> Ext.
R3AI/R*     Start queues for loads from ERP Backend system
R3AU*     Load queues CRM -> ERP Backend system
<b>Inbound queues</b>
CRI*     Initial load queues CRM -> CDB
CRM_SITE*      Load queues from Mobile Clients
R3A*     Load queues ERP Backend -> CRM
CSA*     Send inbound queues of CRM Server Applications
Hope this answers ur query.
Regards,
Amit
Message was edited by:
        Amit Singh

Not getting entries in SMQ1 and SMQ2

Hi,
I have implemented the concepts said in the below said blog.
/people/community.user/blog/2006/11/04/how-to-serialize-idoc-xml-messages-fed-into-xi
Still I'm not getting the entries in SMQ1 (R/3) and SMQ1(XI) systems.
Can any one tell me the problem in my case?
Regards,
Thiyagu

Hi,
>>>How to bring entries in SMQ1(ERP)? Currently I could see Queue name
as SAP_ALE_MYNAME in WE05(in help dialog box).
what can I suggest...
you wouldn't happen to have one of those:
www.sap-press.com/product.cfm?account=&product=H1935
queued IDOCs described in both ways XI - ERP and ERP - XI
with screenshots in my book
but basicalls you just need to specify queue name in WE20
and in receiver adapter case additionally queue processing in IDOC channel
that's all there is
>>>And I am using qRFC for this scenario.So, how can i see entries in SM58?
this was just to check if you actually configured if correctly and we're
talking about the same thing
Regards,
Michal Krawczyk

How to monitor traffic and associations per AP with WCS?

Hi,
is there a way to get traffic and client access/associations data with WCS for each AP of a centrally managed WLAN?
I manage a campus WLAN with a 4402 WLC (software version 6.0.188.0) and a WCS version 6.0.170.0 .
WCS provides me detailed information on a client basis: I'm able to know the association history of each client currently
connected, both which AP the client has connected to, and how much traffic the client has generated/received for each connection.
I hadn't find a way to get the same information on an AP basis. Namely, which clients have been connected, and how much traffic
has been transmitted per time slot.
I suppose this is just a matter of making a different query to the WCS database, since the data are the same used for providing
the information on the client association and traffic history. Though, I haven't find a way on WCS to get this information.
Thanks a lot in advance for any help, cheers,
Piero

Use the client reports from WCS reporting:
http://www.cisco.com/en/US/docs/wireless/wcs/6.0/configuration/guide/6_0reps.html#wp1134645
The Client Summary report contains four sub reports. Each of them can be independently customized. The following information is default information available from a Client Summary report depending on the customizable report selected:
•Number of Sessions
•Number of Total Users
•Number of Unique Users
•Number of New Users
•Number of Unique APs
•Number of Users per AP
•Total Traffic (MB)
•Average Traffic per Session (KB) and per user (in KB)
•Total Throughput (Mbps)
•Average Throughput per Session and per user (Mbps)
•Protocol—802.11a/n or 802.11b/g/n.
•SSID—The user-defined Service Set Identifier name
•VLAN
•Vendor
•User Count
•Time Used (Minutes)
•Traffic (MB)
•Session Count
•% of Users
•% of Time
•% of Traffic
•% of Session
•Total Time of a session

How to monitor ASM and RAC

Hi, bodies:
Our initial goal is to integrate the monitoring into the EMS system which at this point would require the monitoring of a specific service. What service is running with ASM? What services would we monitor for RAC?
thanks a lot.

Do not understand your question. What do you imply by "a specific service"?
There are numerous "layers" to a RAC. The voting disk for the CRS daemons. If this is OCFS, then there is the ocfs kernel module underneath this and the mount that needs to be performed. Then there is the ASM instance. The RAC instance. Per node.
Each RAC instance have register different services that are "published" via the the listener. Oh yeah - a listener service on each node.
There is also the Interconnect that can be monitored. Never mind the o/s of each node ito resource utilisation (memory, CPU and network).
Nor should we forget that ASM itself runs on top of some shared storage mechanism (e.g. SAN drivers) which also can be monitored.
So to determine WHAT you want to monitor, you first need to know WHY you want to monitor.
What is the purpose? The business goal or requirement that you're trying to achieve?
And no - performance management is not drawing a bunch of pretty graphs with dips and spikes and not having the faintest clue what that is saying.

What is the difference among RSA7, SMQ1 and SMQ2?

I notice that RSA7 has more entries than the others.
So what is their relationship?
Thanks!

Hi Christy,
Have a look at this document from August 2009:
"Delta Queue Demystification"
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/40427814-376a-2c10-5589-bc1aaa6692c3&prtmode=print
It explains what you see in RSA7 and how it all works with the delta queues. Excellent document.
kind regards,
Ralf

How to monitor / shutdown processes and users?

Hi,
As you can see in my previous post i'm totally new to Arch and fairly new to Linux...
Here's one thing that bothers me: I don't know how to keep track of all running processes (and end them if needed... I guess you need to 'kill' them but you first need to know their name, right...) and logged on users (even though that's only me, heh...)
How can you do that in Linux? (something like task manager or another admin tool - or a command line version)
Another thing... I think a wiki page 'securing the default Arch install' would be helpful...
(flame me if there already is one, but I didn't find it )
greetings,
d.
(I think Arch is going to be the one Linux distro to break the record of 1 month installation on my pc... woohoo!!!)

Kern wrote:
processes man ps
Now only 2 questions are left: how to monitor logins, and how to secure Arch Wink
Arch Wink, is this a subrelease of Arch? if so i've never heard of it.
I really don't know how that ended up in my post especially because I use semicolon, bracket instead of colon, wink, colon for my smiley...
but as relates to securing Arch, of course I mean against network based attacks. The way you would try to secure Windows. I know how to own windows computers when I have physical access to them, and I guess it's the same thing with Linux pc's... but I want to feel secure that nobody from the internet is going to appropriate my box for illegal or other things, on those few occasions that i'm not behind a router/firewall (which I am not sure I trust either... it's a Linksys wireless/wired router with integrated firewall capability. How secure is that? I don't know!)
Is there no way to deny all other pc's access to this pc? It's a laptop, not a server, so nobody has business accessing it remotely anyway... Actually, this is one of the reasons I had an eye on openBSD secure as hell...
EDIT: since we're at it... another thing I don't find is how I can find out at what speed my cpu is running... is it going down to 600 MHz when Idle or isn't it? etc... That stuff is pretty easy to see in windows... must be feasible at least in Linux hey

How to monitor idoc in PI

Hi Gurus,
how to monitor idoc and how many IDOC s come to in XI /PI ?
Regards
sreeni

Hi Sreeni,
How to monitor the idocs:
To monitor the idocs we have many transactions in R/3
we02: Gives the list of idocs based on your selection criteria
we05: Gives the list of idocs based on your selection criteria
BD87: List of idocs which are ready to be sent out of R3
SM58: If the idocs are sent out of R3 but still in the TRFC queue
Coming to XI/PI:
You can check the idoc in trnsaction IDX5 which is the idoc mionitoring tool.
How to check the count of idocs in XI/PI:
The direction of the IDOCs which are sent out of R3 is always 1. Hence if you can go to transaction we02 and give the appropriate selection parameters and select direction as 1 you would get all the IDOCs sent out of R3 to respective receivers.
Hope this helps.
Regards,
Sarvesh Desai

How to monitor OSD TS failure and get alert or report?

How to monitor OSD TS failure and get some alert or generate an report?
We have SCCM 2012 R2 CU1 with MDT 2013.
I have checked the OSD reports in SCCM and everyone is emty, where do SCCM get data to the what to activate?
(I thinking of "Task Sequence - Deployment Status" reports)
I am not sure people read report manually or lock at the MDT monitor view. So best I think that generate an email or incident in Service Manager when an TS fails.
We do have SCOM, SCSM, SCO.
Is there anyone that can point what way or what option I have?
/SaiTech

Specifically you could use this Status Message Query syntax to monitor your Task Sequences for errors:
select stat.*, ins.*, att1.*, att1.AttributeTime from SMS_StatusMessage as stat left join SMS_StatMsgInsStrings as ins on stat.RecordID = ins.RecordID left join SMS_StatMsgAttributes as att1 on stat.RecordID = att1.RecordID inner join SMS_StatMsgAttributes
as att2 on stat.RecordID = att2.RecordID where att2.AttributeID = 401 and att2.AttributeValue = "DOJ200A1" and stat.SiteCode = "DOJ" and att2.AttributeTime >= ##PRM:SMS_StatMsgAttributes.AttributeTime## order by att1.AttributeTime desc
Just replace DOJ200A1 with the Deployment ID of your Task Sequence and DOJ with your SiteCode.
If you want to generate an alert if the TS fails then you could run a script that calls a utility (or similar) which sends a pre-configured email to a specified address (as an alternative to Torten's response). This could be placed in the built in error
logging section of the SCCM integrated MDT Task Sequence when it fails which I assume you are using (right at the bottom, called Gather Logs and StateStore on failure).
There are heaps of ways of generating an email from a TS and controlling error logging just do a search - as you have Service Manager you could even use your instance of Orchestrator and call a run book in your TS which does the email?
Cheers
Damon

In 26.0, how do I put Download, Bookmarks, History, and Tags into separate windows? I have multi-monitor system and place these different windows . . .

Hello,
I recently, decided to upgrade from 19.0b to the current (26.0) version, as "Tab Utilities" now supports 26, but am finding one of the visual changes counter productive. My two workstations have multiple monitors. One has 2 monitors (2560x1600) and the other one has 4 monitors (2560x1600). On both workstations, I'll place the various Firefox informational windows off the "main monitor" (the one directly in front of me). This way they're available to me at a glance.
(Side note: I refer to my monitors, as 2L, 1 2R and the 4th as "auxiliary.") The one thing I miss most is being able size these Firefox windows independently and in different positions.
I mean I'm used to seeing "Download" on monitor 2R on the right side (1/8 of screen) behind Microsoft Process Explorer's System Information. While the History will be on monitor 2L on the right side at 1/4 of the screen). I'm used to glancing out my right eye at the downloads and when needing something from the past, it's right next to the main monitor #1. This way I can access history quickly.
I can see why a developer (with one monitor say 1920 x 1080) would love seeing one window, but why can't Firefox support both single and multiple monitor users at the same?
Anyway, is there a way to get 26.0 to place at least "Download" and "History" in separate sizable windows?
(I'm not jumping up and down to go back to 19.0b or to try 25, but would like to stay current.)

Hello,
Thank you for your very quick reply. Before I read your reply completely, let me see if I can answer your first concern.
> Maybe I am missing your point.
Maybe I'm not making the point properly. Honestly, I never explained the issue from how it is directly affecting me.
OK, let's do a real world example of what I'm seeing on my two monitor system. I'll first describe what I experienced with 19.0b and earlier, which is IMHO how it should work in 26 and beyond ('''''as an option'''''). Next, I'll review what I'm seeing in 26.0. Hopefully this will help you understand what changed, from a practical perspective.
In 19.0b (and how I like working) for a multiple monitor system:
On the main monitor, I'm running Firefox. It is 1920 x 1080 and is in the lower right hand corner.
On the the monitor to my right (2R), I have the Download Manager list of downloading and downloaded file. It is in the upper right hand corner and takes up about 300 x 1500 pixels.
For a two monitor system, I have the History List running beside Firefox in the lower right hand corner and it is 600 x 1080.
For a three (plus) monitor system, I have the History List running on my left (2L) monitor. It is in the lower right hand corner and is 600 x 1080 pixels big.
For 26.0: I'm seeing the following:
On the main monitor, I'm running Firefox. It is 1920 x 1080 and is in the lower right hand corner. (This is the SAME as with 19.0b.)
When I start the Download Manager and have it set up as I do for 19.0b, it looks OK. It is on monitor 2R and is 450 x 1500 pixels (because of the new navigation side bar).
'''''The problem STARTS NOW (when I start the History List).'''''
When starting the History List, it replaces the Download Manger on the 2R monitor in the 450 x 1500 pixel window. This doesn't work for me because:
1) It is too far away to see. (NOTE: I put it on the 2L monitor in the lower right hand corner. so I can see it easier for the 3+ monitor. In the case of the 2 monitor, I put it beside Firefox again to see it easier.)
Some might ask, but the Download Manager is on the 2R and right side, why can't the History List be there too? Good question, and I can only reply saying:
1) Personal choice.
2) The Download Manager is NOT as busy as the History List and I find it easy to read.
3) The History List is a lot busier and the font size looks to be smaller (might be the same, but it looks smaller to my eyes). I need it closer to me / Firefox.
What I'm saying is this . . . The Download Manager and History List have <ul>''valid reasons to be visible to the user at the same time''.</ul> They also need to be independent of one another for (at least) size and location.
Combining them together is OK for some people, but NOT for everyone. Please make it an option to combine (as in 26) and separate (25 and earlier).
I'm not sure this is the best way to put it, but here goes. Allow users to collapse or expand these various lists by using multiple windows. One window is the collapse view and multiple independent windows is the expand view.
I'll read and comment on the rest of your reply, soon. Thanks for allowing me hopefully to explain my point in a better manner. :-)

How to give browse and monitor only options of an ICM script to a certain group?

I am looking for an option in the Feature Control Set, how to give "Browse and Monitor" only options for a certain group in our contact centre. If someone give me some clue, it would be appreciatable.

Hello Praveen,
This work at some point. But it's not resolving what I intend to do. When I give "Read Only" previledge, to the certain group, it won't be able to do other tasks what they do day to day. I am looking specifically to give read only previledge in the scripting level. Not at the configuration level.
Thanks.

How to monitor SMQ1 and SMQ2

Similar Messages

Maybe you are looking for