Role of SMQ1 and SMQ2

Hi,
What is the use of SMQ1 and SMQ2 in the LO.
can some one please elaborate.

Hi,
SMQ1 u2013 qRFC Monitor for the outbound queue You use this transaction to monitor the status of the LUWs in the outbound queue and restart any hanging queues manually.
SMQ2 u2013 qRFC Monitor for the inbound queue. You use this transaction to monitor the status of the LUWs in the outbound queue.
Check it
http://help.sap.com/saphelp_nw04/helpdata/en/76/e12041c877f623e10000000a155106/content.htm
Thanks
Reddy

Similar Messages

  • Generation of Alerts for errors in SMQ1 and SMQ2

    Dear Experts,
    When messages get stuck in queue (SMQ1 / SMQ2) due to some error, we donu2019t get any alert notification (E Mail) from system. Normally we get below mentioned errors in SMQ1 or SMQ2.
    1. Permanent error in BPE processing.
    2. Error while accessing table.
    Can you please suggest how do we generate alert notifications for the above errors in SMQ1 and SMQ2.
    Thanks
    Dhwani Kamdar

    If u have CCMS configured for your landscape, then it could be possible. Else its not possible in my opinion.
    http://help.sap.com/saphelp_nw04/helpdata/en/8b/ceea3b31aac554e10000000a114084/frameset.htm
    Regards,
    Prateek

  • How to monitor SMQ1 and SMQ2

    Hi Guru's,
    is there any standard way to monitor SMQ1 and SMQ2, like i would like to know any std way to trigger email alert if the queue goes beyond 500 in number.
    Vinay

    Hi there,
    This should be possible through Business Process Monitoring  in solution manager
    http://service.sap.com/bpm > Media Library > Technical Information  here you can find the setup guides.
    Mark

  • SMQ1 and SMQ2?

    Generally where smq1(out bound queuw) and smq2(inbound queue) is used?

    Hi Reddy,
    SMQ1 - qRFC Monitor for the outbound queue. You use this transaction to monitor the status of the LUWs in the outbound queue and restart any hanging queues manually.
    SMQ2 - qRFC Monitor for the inbound queue. You use this transaction to monitor the status of the LUWs in the outbound queue.
    Check these links for more Information,
    Note 380078 - FAQ: BW delta queue (RSA7): Questions and answers
    SMQ1 & SMQ2
    http://help.sap.com/saphelp_erp2005vp/helpdata/en/15/0eff40e39ba854e10000000a1550b0/frameset.htm
    Outbound Queue Administration
    http://help.sap.com/saphelp_erp2005vp/helpdata/en/4c/cf5c3c3b067331e10000000a114084/frameset.htm
    http://help.sap.com/saphelp_erp2005vp/helpdata/en/e5/de5f3cabde6d6fe10000000a114084/frameset.htm
    http://help.sap.com/saphelp_erp2005vp/helpdata/en/76/e12041c877f623e10000000a155106/frameset.htm
    Thanks,
    Sudhakar.

  • SMQ1 and SMQ2 queues stuck

    Hi All,
    We are using ISU and CRM system for Retail business, Always work flows and lot of business transactions will perform in those systems and replications will happen in both systems.
    Due to this reason lot of entries are present in SMQ1, SMQ2 and SM58 will present. We are continuously monitoring though some times some entries are are found in sysfail status. due to this lot of entries are piled up and queues becomes very high amount.
    As a work around, If we unlock the queue ( sysfail entry ) two to three times the entry will go and the remaining entries will start move.
    Currently our requirement is can we do this kind of this as automated ? I mean as per conditions it will unlock the queues automatically ?
    Please suggest me in this case.
    Thanks in advance.
    Pavan.

    Hi Dustin,
    Thanks for your reply. I had gone through the mentioned notes and say about it is not recommended to use regular basis. Here our requirement is need to check the sysfail entries in the queue. Need to unlock the queue twice or thrice to re-process the entry. If any data issue our CRM middle ware team can handle.
    The major purpose is to unlock the queue entries which can re-process automatically without manual correction.
    I like to proceed with Deepanshu suggestion to check with ABAPer. before that I need to check with our CRM middle ware team to get the list of error which can process through unlocking the queue.
    Will keep you posted the updates. Thanks a lot for your time and response.
    Thanks,
    Pavan.

  • Queues stuck in SMQ1 and SMQ2

    Hi,
    In CRM Middleware, I am trying to do some Master Data upload of Sales Orders from CRM to R/3 but a queue  MCEX11 gets stuck on the R/3 side with 1 entry and status NOSEND
    Can you please tellme how to get rid of this? Also how can i avoid distribution locks on a document.
    On the CRM side also certain queues were stuck in the outbound SMQ1 with status NOSEND. How to process these  queues manually?
    I checked note 431345 and other related notes also. Would appreciate if someone can help me on this.
    Thanks.
    Rgds
    Priyanka

    Hi Priyanka,
    To clear the no send status entry, go to R3AS, select the object say for BP (Bupa_main) press enter and then execute, then open R3AM1 enter object name as Bupa_main and select Running and done and execute.
    Now you can open SMQ2 and click on each entry with nosend status and then click on activate queue in the top toolbar, this shld change the status to running and then click on refresh.
    The following is the list of Queue extensions that are used in CRM, all the queues start with these extensions:
    <b>Outbound queues</b>
    CDB*     Start queues for loads CRM -> CDB
    CRM_SITE*     Load queues for Mobile Clients
    CSA*     Send queues of CRM Server Applications
    EXT*     Start queues for loads CRM -> Ext.
    R3AI/R*     Start queues for loads from ERP Backend system
    R3AU*     Load queues CRM -> ERP Backend system
    <b>Inbound queues</b>
    CRI*     Initial load queues CRM -> CDB
    CRM_SITE*      Load queues from Mobile Clients
    R3A*     Load queues ERP Backend  -> CRM
    CSA*     Send inbound queues of CRM Server Applications
    Hope this answers ur query.
    Regards,
    Amit
    Message was edited by:
            Amit Singh

  • Not getting entries in SMQ1 and SMQ2

    Hi,
    I have implemented the concepts said in the below said blog.
    /people/community.user/blog/2006/11/04/how-to-serialize-idoc-xml-messages-fed-into-xi
    Still I'm not getting the entries in SMQ1 (R/3) and SMQ1(XI) systems.
    Can any one tell me the problem in my case?
    Regards,
    Thiyagu

    Hi,
    >>>How to bring entries in SMQ1(ERP)? Currently I could see Queue name
    as SAP_ALE_MYNAME in WE05(in help dialog box).
    what can I suggest...
    you wouldn't happen to have one of those:
    www.sap-press.com/product.cfm?account=&product=H1935
    queued IDOCs described in both ways XI - ERP and ERP - XI
    with screenshots in my book
    but basicalls you just need to specify queue name in WE20
    and in receiver adapter case additionally queue processing in IDOC channel
    that's all there is
    >>>And I am using qRFC for this scenario.So, how can i see entries in SM58?
    this was just to check if you actually configured if correctly and we're
    talking about the same thing
    Regards,
    Michal Krawczyk

  • What is the difference among RSA7, SMQ1 and SMQ2?

    I notice that RSA7 has more entries than the others.
    So what is their relationship?
    Thanks!

    Hi Christy,
    Have a look at this document from August 2009:
    "Delta Queue Demystification"
    http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/40427814-376a-2c10-5589-bc1aaa6692c3&prtmode=print
    It explains what you see in RSA7 and how it all works with the delta queues. Excellent document.
    kind regards,
    Ralf

  • Assigning Roles to Users and Groups

    Hi,
    We have installed EP 5.0 SP4...with Content Management...we configured the LDAP to Portal......all the users are maintained through LDAP only...the problem is assigning the Role's to user..here in portal how to assign the roles to the users...we are not getting the Role assignment option under Portal Admin TAB..is there any way to configure the roles to User's are Group's.....
    it is an urgent assignment for me..help can be appreciated...
    sudhir

    Sudhir,
    You can assign the roles to users and groups as below.
    1. Select the System Administration in the top level navigtion
    2. Select user administration
    3. You can search for a specific user or a group from this iView.
    4. Use the edit button to edit the profie of the user or group.
    5. Search for the role in the search iView.
    6. Add the role to the user of group and save.

  • Installing second Exchange server 2010 with all roles (CAS, HT and MB) in the same domain?!

    Dear all,
    first of all thanks for reading this topic :-)
    In our enviroment, we have a Exchange 2010 server (Version: 14.01.0438.000), whitch is installed with all server roles (CAS, HT and MB) on one server(OS is Windows Server 2008 R2 Enterprise). This exchange server sends all external mails to a smarthost (Redddox).
    We are using Outlook Anywhere, Active Sync and OWA.
    Now, we need to migrate this Exchange server to another one, because we think, that the server´s OS is corrupt and also, there are wrong licenses installed. The "new" server will have the same OS Version and Exchange Version (2010).
    Currently I´m a little afraid, to install a new one - because I think when I will install the CAS and HT role, something will happen in my productive enviroment (Autodiscover, SMTP Connectors, Cerficates a.s.o.).
    To install the mailbox role, I think this will not affect anything.
    Can you help me a little bit in what to take care of? Do I need to preconfigure something, before I will install the second exchange? What about the version / service pack of Exchange to install? Must it be the same as installed on the first one?
    Any help would be appreciated!
    Jennie

    Hi Jennie,
    Below are the steps if you are not planning to upgrade.
    1) Install new Exchange2010-SP3 Server all roles Please check
    this
    2) Install the certificate in the new server by requesting a duplicate from the 3rdparty CA. Or export from the existing Exchange 2010 and import to the new one. Please check
    this
    3) Set your autodoscover, OAB, ECP, OWA URLs same as the current Exchange. Below artciles will help you to do that.
    For OAB, Autodiscover, EWS please check steps 5,6,7in this
    For setting OWA and ECP URLs please check
    this.
    4) Move few mailboxes as a test and check. If no errors move the rest.
    5) Move your OAB generation server to the new server. Please check
    this
    6) Move you public folder contents to the new server you have. Please check
    this
    7) Configure your firerwall to receive emails on the new server and other services like EWS, OWA, ActiveSync.
    8)
    Add the new server as the source server and in the current send connector and remove the old server from the send connector.
    Shutdown the server for a couple of days and monitor. So you will know if you missed something.
    Uninstall Exchange2010 from the add remove programs.
    Thanks, MAS
    Please mark as helpful if you find my comment helpful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you.

  • Are roles in SXMS_CONF_ITEMS and SLD consistent?

    hello!
    i installed and configured my new XI system.
    when i go in Runtime Workbench (via browser) i see an error in result of  Integration Engine monitor .
    "Are roles in SXMS_CONF_ITEMS and SLD consistent?"
    i check all in SLD and i think is ok.
    have you any suggestion?
    thanks
    Alex

    The role of a business system is defined centrally in the SLD.
    However, you can overwrite this setting locally in the table SXMS_CONF_ITEMS.
    This test checks whether the role descriptions are consistent. If not, the locally defined role is used at runtime.
    if helpful reward points are appreciated

  • Trying to understand "User/Role/Profile Synchronization" and Batch Analysis

    Hello,
    Im trying to understand what exactly and from which tables these jobs are copying to which tables in CC. I have a understanding that these jobs are moving also deleted roles from backend. This is causing unnecessary delay to long lasting job. 
    I would appreasite if some one could explain the logic behind these jobs. What the fullsync and incremental is reading ? What kind of changes are causing a role/user/profile  to be included to the full and incremental jobs?
    How the incremental analysis logic is built ?
    br Janne

    Janne,
    In my current implementation we are going for an offline risk analysis due to the heteregoneus system landscape of our client (several SAP and non SAP systems and several SAP systems under 4.6C). Eventhough within our approach we don't perfrom the backend synchronization (we use CC data extractor to pull data from backend into CC) hope the following info could hel you:
    The tables such jobs you mention access to, are all the SAP backend system tables related with users, roles, profiles, action and permissions. If you check the data mapping appendix of the "user and configuration guide for 5.2" you will see all the data that CC retrieves. For instance, in order to extract user info (UserID, FName, LName, Email, Phone, Email, Department) tables USR21, USR02, ADRP, ADR6 and ADCP must be accessed.
    In terms of CC tables:
    VIRSA_CC_SYSUSR >> UserIDs and Systems ID relationship
    VIRSA_CC_GENOBJ >> User, Role and Profile master data
    VIRSA_CC_GENACT >> User-action, role-action and profile-action data
    VIRSA_CC_GENPRM >> User-permission, role-permission and profile-permission
    VIRSA_CC_SAPOBJ >> Action-permission
    VIRSA_CC_OBJTEXT >> Objects descripcions (ACT, PRM, FLD, VAL, ORG)
    Hope this helps.
    Regards,
       Imanol

  • Differences between Roles, Schemas, Users and Logins.

    I need differences between Roles, Schemas, Users and Logins. Can anyone help me. Thanks in advance

    Roles:
    I think of creating roles in the database to group users of like
    function.  Roles are granted certain permissions in the database.  You
    should become familiar with the fixed database roles since these will be
    utilized once you start creating users within the database.  Also, once
    you see the type of permissions that are granted to each role, is makes
    more sense.
    Schema: there can be several schemas in a database,
    which will house different types of objects such as tables, indexes,
    stored procedures, functions,  etc.  Users own schemas.  Looking into
    the AdventureWorks database illustrates this concept, with several
    schemas like HR, Production, etc.
    Login: Think about login as
    gaining access to the SQL Server instance.  If a user account is not
    granted any permissions within the instance, you basically just were
    able to unlock the door and enter the room, by creating a user you then
    grant access to the database objects or principals, and can begin to
    work with them. 
    Users:  Users own schemas, and as such will be
    able to manipulate the objects they own.  Some of the manunipulations
    are very permissive, such as creating tables, indexes, stored
    procedures, functions, etc.  These are developers and administrators.
    Users
    are created and granted permissions for application use, which will
    have select, update, insert, and delete and execute permissions  to a
    finite set of objects in the schema, for which the application will need
    to function properly.
    In a client server database, as an
    example, of the structure.  Roles were defined which provides the
    permissions to the database objects in the database, which only has one
    schema 'dbo'. One SQL server login was created with the same username,
    and dbo is the assigned default schema, and the roles assigned to that
    username. 
    In the application, each specific user is given there own
    "application" login which is mapped to the one defined sql server
    login.
    Ahsan Kabir Please remember to click Mark as Answer and Vote as Helpful on posts that help you. This can be beneficial to other community members reading the thread. http://www.aktechforum.blogspot.com/

  • Role of Controls and relation with Program

    Hi!
    could anyone explain me what is the role of Controls and a program?
    For example, for creation of Invoice and Invoice List is used the same program - SAPMV60A, but different controls: TCTRL_UEB_FAKT for Invoice and TCTRL_UEB_RELI for Invoice List.
    What is the role of these controls?
    Will reward,
    Mindaugas.

    Hi Seshu,
    I want to create invoice list without doing call transaction to VF21.
    I have found a FM RV_INVOICE_LIST_CREATE which I think can serve my purpose. I have the billing type, billing date and the list of billing documents to be used to create the list. But the FM also asks for the below tables to be passed.
    XKOMFK
    XKOMV
    XTHEAD
    XVBFS
    XVBPA
    XVBRK
    XVBRL
    XVBSS
    As I will not have the data to be passed into all of these tables, can I pass initial tables and only populate XVBRK with the individual billing documents? Will this work?
    Regards,
    Naba

  • MDG-S BP Grouping,BP Role,BP Categeory and ERP Vendoe Account Group

    Hi
    Can anybody explains me releationship between MDG-S BP Grouping,BP Role,BP Categeory and ERP Vendoe Account Group?
    It seems there is no requried field except Change Request Description.If we input value for CR Description only, we can still able to sumbit and activate CR and Bussiner Partner ID (Which is internally generated) will be stored in MDG stagging table for entity type BP_HEADER.
    My question is then what is use of BP Grouping,BP role in this as it contains blank value? Also it observed that for new ERP Vendor the Account Group field is always in non editable mode,Any reason for this? Same issue with Company Code after selecting CC it displayed as non editable field before submitting CR as well.

    Hi Sanjay,
    When you select New -> Organization, below screen comes, In Grouping drop down you need to select Vendor Account Group and in Role list enter role.
    Follow same procedure when you want to create next vendor.
    Under new pushbutton, you will get three options:
    Organization means when you want to create vendor.
    Person means you are creating person not vendor, these person you can assign as a contact person to the vendor in Relationship tab.
    Regards,
    Sudhir

Maybe you are looking for