How to rectify "No master record exist for the vendor TEST" in ME41

I created an Vendor TEST in XD01
while creating a RFQ number in ME41 . It showing "No master record exist for the vendor TEST".
Why is this error occurs, what is the mistake how to rectify it

Hello,
Create the vendor with all details ie) Accounts, Purchase Org. Etc..
If useful reward points.
Vasanth

Similar Messages

Customer master record exists for sold to party

i have another issue its like when am going to creat an invoice correction request i get an error it says no
customer master record exists for sold to party the customer master is extended to the proper sales area
can any one help me on that plz
regards
subhro

Hi
Check with the SOLD TO PARTY PATNER FUNCTION exist in your customer master data or not.
Your customer master data must have sold to party partner function.
Thanks,
KP

No CATS record exists for the long text in row 4

Hi,
When we are tyring to upload the time sheets of tha employees in se38 usinga customized program, from Non sap to sap, for a few employees we are getting an erro like No CATS record exists for the long text in row 4, where are we supposed to verifiy, what causes this error.
Please assist.
Thanks,
Shilpa.

Your first step should be in your input file. What is on the fourth line?
Look into the Blueprint Specifications of your Custom Program for the parameters of that input file.

Sales Order Error No customer master record exists for sold-to party

Hi,
I am trying to create a sales order in IDES. Unfortunately it is showing me error: No Customer master exists for sold to party. Now I have already checked my assignments, combined sales area in vor1 and vor2. Checked PDP ( In PDP I have creates partner functions as z2, z5, z6, z7). I have also checked in XD02 and XD03 and in partner function tab it shows as maintained. Please help as I am still not able to create it.

Dear Phanikumar,
I am not sure whether we can create a customer for a future date or not.
I might sound absurd but suggested this solution because I had faced a similar issue while I was working on a remotly supported IDES server which I was using for practice purpose.
Now the case was that, I had created some customers few days back, lets say on 01.03.2014 and today the administrator of the server changed the date & time of the system from 11.03.2014 to 11.03.2013 bymistake.
Hence when i was trying to create orders for a customer created on 01.03.2014 i was not able to do so as the system was throwing an error customer does not exist.
I am sorry if I have suggested something awkward or wrong, intention was to provide a solution.
Please correct if I have suggested someting wrong.
Thanks,
Kishor

Pop up message during MIRO when Downpayment exist for the Vendor

A Vendor is already having Downpayment of some amount, while doing Invoice Verification (MIRO) for this vendor one Pop up message is coming "X Currency Name of Company Vendor Account Group Exist".
In this case when the downpayment amount is Rs. 100, Currency is EUR, Description of Vendor Account Group is Third Party Vendor & Company name XY, the pop up message is coming as "100 EUR XY Third Party Vendor Exist".
While Checking the message through SE91, the message(F5096), the description is written as "&&& exist".
Why the message is not coming like this, "100 EUR Downpayment exist".
I want to know where the setting lies.
Nalini Kanta Das

milkmansrevenge wrote:
I have since tried to make a JOptionPane appear in a seperate thread Not good since all Swing GUI components must be called on one thread only, the EDT. I'd recommend either creating a JOptionPane as a JDialog (the API will show you how) or just create a JDialog, and show either one in a non-modal way using a Swing Timer to dispose of them when a time period is up.
for example:
        JOptionPane optPane = new JOptionPane("This is my message");
        // here FooFrame is the enclosing JFrame. This needs to be changed
        final JDialog dialog = optPane.createDialog(FooFrame.this, "Dialog Title");
        dialog.setModalityType(ModalityType.MODELESS);
        dialog.setVisible(true);
        int duration = 2000;
        Timer swingTimer = new Timer(duration, new ActionListener()
          public void actionPerformed(ActionEvent arg0)
            if (dialog != null && dialog.isVisible())
              dialog.dispose();
        swingTimer.setRepeats(false);
        swingTimer.start();Edited by: Encephalopathic on Mar 29, 2009 3:23 PM

How to save a "new" master record when pressing the "create" in the detail

I have a simple Master - Detail form for a Customer - Activity case, where the update of Activity table happens through an additional form.
When users press the create a new user on the top report (Customer Report) they enter the Master detail form, fill in all the Customer fields and instead of saving the customer (master) record and then come back to create a new activity (detail), they press right away the "create new activity" button, causing all customer data (master) to get lost.
Is there a way to trigger the parent record to be saved when a user presses the create activity (detail) button?
Thank you
Yannis

In order to show you better the idea, I created a demo application that you can see at: http://apex.oracle.com/pls/otn/f?p=45792:2:1386218200737406::NO:::
When you create a new order (page 3) you can see that instead of inline editing for the detail, there is a report that will drive to another form (page 4) to edit the data for order detail.
So just to clarify, I am interested to find out in page 3, how to cause a master record to save (when on insert) when a user press the Create button to add a new order detail.
Thank you
Yannis

How to check whether a Record Exists or not in Ztable

Hi all,
I have Req like this
In ZTable i have 2 fields * Legacy System , Legacy Material No*
Environment Value is coming in one of the field in Idoc
The logic is if the Environment Value is UK and a Record Exists on the ZTable for Legacy Sysyetm = Leg1 means i have send Legacy Material No , else Send 01
Please suggest me the process for this
REgards
Vamsi
Edited by: Vamsi Krishna on May 19, 2009 5:31 PM

Hi Michal / Aamir,
Thanks for your replies.
The ZTable is at R/3 side only, iam using RFC Lookup for this, but iam bit confuse on how to construct the logic to check whether there is a record Exists or not on Ztable
Logic shld be If the Environment value is UK and a record exists on the Ztable for Legacy system "ABC" means then send Legacy material number else send 01
In Table we will have the fields Legacy System Legacy Material No & Environment value is coming from Idoc itself( Ex: UK or US)
Regards

180 GB of my 639-GB Macintosh hard drive is used. 320 GB of my 498-GB Tie Capsule is used. Only one backup ("now") exists for the Time Capsule, which can no longer backup because of "insufficient space". How come? What is wrong?"

180 GB of my 639-GB Macintosh hard drive is used. 320 GB of my 498-GB Tie Capsule is used. Only one backup ("now") exists for the Time Capsule, which can no longer backup because of "insufficient space". How come? What is wrong?"

Thank you William for your most helpful response. I shall deal first with your three comments:
Not being tech savvy, I would not have been able to make that call myself but it sure makes sense.
I have updated my profiles as you suggest. Excellent tip.
This guidance is good. Being new to Apple Support Communities, I did not find the field a labeling and guidance to be clear, a point you make. Now I know, I shall do as you say and will use the small slim box as a header to the full message/question, which will place in the larger box below.
Secondly, I come to your question: Did anything change on your Mac recently, such as replacing the disk or main logic board?
The answer is “yes”. Two events have happened both of which concerned the Time Capsule:
The telephone company, with which I have access to the Internet and I have my email account, installed a new modum. After the technician left I had to try and get the Time Capsule and WiFi working again which ended with my having to call Apple for technical assistance. The Apple technician walked me through a number of procedural steps which effectively re-set up the Time Capsule.
Access to the Internet failed and the telephone company reset the modum. I had to call Apple again. This time the technician did not reset the Time Capsule but walked me through a number of steps tha included renaming the “site” (not the Time Capsule).
Another piece of information that may be relevant is that the MacBook Pro uses the Time Capsule for backup. Everything appears to be in order. When I enter the Time Capsule for this laptop I have backups going back for a long time.
Also, I do a weekly backup of the two computers onto another external hard drive using the Time Machine software. So I have another backup of both computers.

Error-u201CNo customer master record exists with sold to partyu201D. from Webshop

Hi,
We are trying to create an order from webshop calling BAPI_SALESORDER_CREATEFROMDAT2, while saving the order we are getting an error that "No customer master record exists with sold to party".
When we try to execute the same with stanalone program from Java the output is coming fine.
If anyone worked on similar issue, kindly let me know.
-Thanks

Hello Mark,
Yes, Master data is available in both systems. Configuration is also fine.
Thanks,
Satish.

How to build dynamic databases(record set) for mobile?

Hi All ,
i have an applocation that needs to personalize the data for users .
i have the data available , but dont know how to personalize it fot users to download special version of my application.
how to build dynamic databases(record set) for mobile?

In the load rule in the dimension build settings you would need to go to the tab dimension definition, choose the time dimension and right click on it. Select Edit properties. If you have not done so, set the dimension to be the time dimension. Then go to the generations/levels tab and set the generation names you need. For example if you want YTD, you would set the generation name to Year, if you want QTD set it to Quarter. You would set the number to the generation number that coorisponds to the generation. The DBAG has the list of names for all of the DTS members.

Error in SWWERRE "No personnel control record exists for accounting area 99"

Dear Experts,
The standard job for restarting of workflows with temporary errors , SWWERRE, has suddenly started failing.
The message obtained in Job Log is "No personnel control record exists for accounting area 99".
The Payroll Control Record for Payroll Area 99 does not exist as it is a non-payroll relevant area.
There has been no change in HCM configuration or Job characteristics.
What could have triggered these sudden failures.
Please suggest.
Regards,
Shilpa A.

Hi Shilpa
This is not an issue with the report RSWWERRE (Job SWWERRE).
It must be trying to pickup work items which are in Error State (temporary) - that item may have this data issue - Run Report RSWWERRE from SE38 and debug, you will come to know.
Check if:
1) The error WI belongs to TRIP (BUS2089)
2) Put a break point in FORM SUB_ABRECHNUNG(SAPLHRTR) and run report RSWWERRE (if the work item is still in TEMPORARY ERROR SATE and has not converted to permanent error) ..... debugging should stop there if the above point is correct
3) This will give you the Trip and Employee number - check if the data is consistent (BAPI_TRIP_CHECK_STATUS)
4) This usually happens when you use &TRIP.AVSEXORADAUTHORITYLEVEL& in the binding (of the error step)
if this is true, correct the data and it should work else delete those work items and restart the job (remember to correct the data to avoid future issues).
If not,
still the fist point holds true, "It must be trying to pickup items which are in Error State - that item may have the issue - Run Report RSWWERRE from SE38 and debug, you will come to know." Some errors are deep rooted and cannot be caught by the job
Also check if note 1452535 is relevant for your release.
Regards,
Modak
Message was edited by: Modak Gupta
............Also check thread: ..
http://scn.sap.com/thread/2021322

How do u find logical datanase exist for ur program requirement?

How do u find logical datanase exist for ur program requirement?

Hi,
The transaction Code SE36 is where you can find all the Logical Database that exist in the SAP system. You can find the existing logical database that exist and can use which ever that suits your needs.
Logical Databases are mostly used in HR ABAP and in HCM Reports.
Thanks,
Samantak.
<b>Rewards points for useful answers.</b>

How make Adobe Muse Master page Template for BC

How make Adobe Muse Master page Template for BC.?
Thanks
Ares

Hi Brad,
I notice doble brackets and also use normal page for converting it to BC template. Also I have delete uploaded page from /dir as BC every time generating the same tamplate but with diferent name when I am publishing updated project from Muse.
Ares

How to maintain open change request control for the transaction MM02 & CS02

hi all...
can any one please let me know that, is there any BADI or Enhancement spot
where i can code for my desired functionality...
how to maintain open change request control for the transaction MM02 and CS02.
Desired Functionality:
The user wants to maintain a material, bill of material or a document.
On the initial screen of the respective transaction (MM02, CS02)
user enters a change request number.
The system checks whether the object record that the user wants to maintain
is already assigned to other change request numbers.
If this is the case, the system displays a warning, stating that there are
other open change requests for this master data record.
In addition, the system lists the relevant change request numbers.
The user can continue the maintenance or leave the transaction and first check
the mentioned change requests.

hi satish thanks for reverting back
but sorry yaar given enhancement is not triggering...
but my requirement is:
- after executing the transaction MM02 & CS02.
- user inputs the data for Material Number and then he enters the Change Number.
- if the given Change Number is not maintained with the Material (i dont no
where/how this two fields are maintained internally), then it has to raise a
warning and it should list the existing Change Numbers for that perticular
Material.

How to change order unit in ME22n for particular vendor

Dear All,
We have defined ordering unit in material master as "L".
For other vendors & new PO we get proper ord.unit display.
But we r not getting in PO of particular vendor.
How to get order unit in ME22n ? What is the relation of order unit with Vendor ?

Hi
Did you ordere the particular material for the vendor concerned already with different Order unit (SKU), this might be the reason why you are not getting the ordering unit in PO while ordering. Did you maintain the details of conversion in master between SKU & Ordering unit,if yes, then check for Info Record for the material and vendor combination and in the Genaral Data Tab chek for the variable order unit activation if not available then activate it and if the system is asking the conversiondetails enter herr the conversion also. Now if you create PO you will be able to assigne the new order unit.
Regards

How to rectify "No master record exist for the vendor TEST" in ME41

Similar Messages

Maybe you are looking for