How to remove network devices through powershell? (scom 2012)

Hi
Could anyone says how to delete network device in SCOM 2012 through powershell?
In 2007 we have Get-RemotelyManagedDevice.
I have a big number network device in monitoring and now need delete some of them with specific filter, all switches.
How to do it?
Thanks
Alex

The devices were discovered by an old Management Server that was reinstalled.
I finally got those devices out of my SCOM environment using this SQL query (just replace networkdevicename):
UPDATE
BaseManagedEntity
SET
isdeleted=1
from
BaseManagedEntity where
BaseManagedEntityId in
(select
BaseManagedEntityId from
BaseManagedEntity where
displayname like
'%networkdevicename%')

Similar Messages

  • Remove network device inventory from SCOM database

    Hello Gurus
    I have a quick question. I think one of the internal connectors in my SCOM environment has got deleted by mistake. As a result all the network devices that were being monitored previously has now disappeared. I believe because they were present in the database,
    I can't discover them now. Is it possible somehow to list those network devices from the database, and then delete them, by using powershell and/or SQL.
    Any help in this regard will be greatly appreciated.
    Regards,

    You can delete them by:
    In the Discovery Rules option under the Administration Tab, you will be able to see all the network devices that are discovered. This shows the devices that are discovered and currently getting monitored in SCOM. You can select multiple devices and then
    remove them.
    Then Run in powershell Get-RemotelyManagedDevice to check that all Network devices deleted.
    you can also check below link to remove/restore network device
    http://technet.microsoft.com/en-us/library/hh212795.aspx
    Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"

  • Network device configuration for SCOM 2012 Network Resource Pool

    We are planning for two management servers in a Network Resource Pool.
    So(considering failover situation) to send traps to both devices do we need to configure both management servers as SNMP servers on these devices?
    If yes, Then it will definitely need double traffic for sending traps to two devices, isn’t it?
    What SNMP server name we should use while configuring devices?
    Thanks,
    Vinayak

    Hi,
    >So(considering failover situation) to send traps to both devices do we need to configure both management servers as SNMP servers on these devices?
    Yes, you need to configure both management servers as a trap recievers.
    >If yes, Then it will definitely need double traffic for sending traps to two devices, isn’t it?
    That's right.
    http://OpsMgr.ru/

  • How to discover network devices?

    We have a SCOM2012R2 management group with 6+ management servers. If I want to configure discovery of network devices,
    1. can I use "All management servers" pool to discover them? or
    2. Can I specify/reserve two of them just to do the discover and manage those network devices (a handful devices), and how?
    3. If I create a resource pool contains only those two MSs, do I need to remove them from "All management servers" pool?

    Yes, you can create one discovery rule per management server or gateway server.
    http://blogs.technet.com/b/ptsblog/archive/2011/11/28/network-monitoring-with-system-center-operations-manager-2012.aspx
    Operations Manager supports monitoring of the following number of network devices:
    2000 network devices (approximately 25,000 monitored ports) managed by two resource pools
    1000 network devices (approximately 12,500 monitored ports) managed by a resource pool that has three or more management servers
    500 network devices (approximately 6,250 monitored ports) managed by a resource pool that has two or more gateway servers
    Also you can refer below link
    http://technet.microsoft.com/en-us/library/hh212935.aspx
    Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"

  • How to remove a device from my plan

    I would like to remove a device from my Share Everything plan and lower my monthly bill.  How do I go about this?

    Its simple.  Verizon specifically does not want customers removing devices by themselves because they want to get you on the phone and try to talk you out of it.
    I actually stopped by a Verizon store to have my tablet taken off my plan, and the ONE person they have that is authorized to do terminations wasnt in the store so they couldnt do it.   
    I am a little annoyed to say the least.

  • How to remove a device from my apple.ID

    I bought an iPad used and it was sent with a apple id and password   My wife changed both and now one week later it says the Beta OS is over and we must remove the device from the old apple id  to move to the new one.
    How do I remove a device from my apple id?

    This may help...
    iTunes Store: Associating a device or computer to your Apple ID

  • How to import network devices on ISE 1.2

    Hi, experts,
    I'm trying to import network devices on ISE 1.2.0.899
    so I downloaded the template and opened with notepad and wrote all the nessesarry information.
    and I tried to upload to ISE, and it just said import failed. no reason..
    does anyone know how to do it ?

    Hi jiyoung
    This import failed error might occur due to following reasons so please make sure that :
    You are not running two import jobs of the same resource type at the same time. For example, you cannot concurrently run two import jobs to import network devices from two different import files.
    More over please make sure that while configuring the network devices you are performing job from a super admin or network device admin group.
    Best Regards:
    Muhammad Munir
    Hi, experts,
    I'm trying to import network devices on ISE 1.2.0.899
    so I downloaded the template and opened with notepad and wrote all the nessesarry information.
    and I tried to upload to ISE, and it just said import failed. no reason..
    does anyone know how to do it ?

  • How to remove from devices for itunes

    How do I remove old devices so that I can access itunes from a new device?

    kosinar wrote:
    I am having hard time ti find the way to remove 2 old iPhones from the list of my devices in Find my iPhone application for iPad. I tried to do it from my Mac in Mobile Me account but I do not see any options that will let me do it. I am sure it is there but I can not find it. Will appreciate advice.
    In the upper right of the panel that opens offering you the options of displaying a message or playing a sound, remote wipe, remote lock... is a link to remove the device. The link is only present when a location for the device cannot be determined.
    Message was edited by: crh24

  • How to remove 'Network Unavailable' message?

    Ref How to remove annoying 'Network Unavailable' message.
    On my Apple iphone I clicked on Settings -  then clicked Carrier -  then patiently clicked time and time again the 'Automatic' option until a tick mark appeared.  Now the ' Network Unavailable' message has disappeared.  Hope this helps someone else.

    Hello Tokyo,
    The article linked below can help resolve this issue.
    iPhone: Troubleshooting No Service
    http://support.apple.com/kb/TS4429
    Cheers,
    Allen

  • How to remove(Delete) multiple agents from SCOM console

    Hello Experts,
    We are using scom 2012 and monitoring around 10000 agents in our environment.  Now Windows team decomissioned around 1000 server/clients and we need to remove those agents(grayed agents) from console.
    It is very difficult to find and delete the agent one by one.  Is there any script to remove/delete the agent from console?
    Thanks in advance.
    Regards
    Karthick

    Hi,
    In addition,several ways to remove SCOM agent if SCOM console fails.
    1. Add/Remove Programs (appwiz.cpl)
    2. Run (MsiExec.exe /uninstall {E7600A9C-6782-4221-984E-AB89C780DC2D} /quiet)
    3. psexec -d MsiExec.exe /uninstall {E7600A9C-6782-4221-984E-AB89C780DC2D} /quiet *
    Here are some links about using PowerShell remove Agents:
    - http://support.micro...b/2626752/en-us
    -  http://technet.micro...y/hh545186.aspx
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • How to remove a device which doesn't exist any longer

    Since Snow Leopard iSync looks for my historic device Siemens S65 when syncing with MobileMe. I then removed the device from the bluetooth-list. But iSync is still searching and giving me an error alert.
    In the iSynch menue you can add a new device but not remove an old one which is not connected.
    The problem is, that the old Siemens S65 does not exist any longer.
    Has anyone an idea?
    Thanks in advance

    Thanks, Julian!
    Your answer was helpful and now it works properly!
    But in addition: while syncing on my MacBook with MobileMe the process runs without starting the application iSync. On my iMac it does and after syncing it does not quit automatically.
    Any explanation for that?
    Thanks and greetings from Hamburg, Germany
    Reinhart

  • HT204074 How to remove a device from my Apple ID

    I have been sharing an apple ID with my mother for the last few months as she forgot her original apple ID password. Now i want to remove her iphone from my account - can I remove this device without her losing all of her phone numbers and photos etc? Ideally if there is a way for me to keep my own apple account and for her to set up a new one but not lose all her data etc that would be great. Thanks

    This may help...
    iTunes Store: Associating a device or computer to your Apple ID

  • How to configure windows services alerts in SCOM 2012 for all agent servers. For eg, Terminal Services, Netlogon, RPC etc..

    Hi,
    I need to configure different windows services alerts in SCOM 2012. Below are some of the windows services I need to monitor through SCOM.
    Serivce: Windows Management Instrumentation
    Service: Netlogon
    Service: Remote Procedure Call (RPC)
    Service: Server Service
    Service: Terminal Services
    Service: Windows Time
    Service: Workstation
    Service : WWW Publishing Service
    Could some one please assist or share me the details, how to configure these services for windows agent servers.
    Thanks..
    Regards, Rajeev Parambil

    Hi,
    A certain set of services are monitored by default on all agents:
    DNS Client
    DHCP Client
    RPC
    Workstation
    Server
    For all the other services you could create a service monitor.
    A nice blog series outlining this process can be found here: http://www.bictt.com/blogs/bictt.php/2011/03/16/scom-monitoring-a-service-part1
    It's doing common things uncommonly well that brings succes. Check out my SCOM link blog:
    SCOM link blog

  • Creating an Advertisement Through Powershell SCCM 2012

    Currently I'm trying to find the most efficient way to automate the package deployment process using powershell. The script I'm using at the moment is returning Message ID 100035(waiting for content) under the deployment status, and the CAS logs say
    <![LOG[Requesting content SKG00054.1, size(KB) 1344, under context System with priority Low]LOG]!><time="11:18:46.382+240"
    date="07-06-2012" component="ContentAccess" context="" type="1" thread="2780" file="contentaccessservice.cpp:855">
    <![LOG[Submitted CTM job {1CA3F8E4-13DA-1483-9F8E-12FUL5C4E3FE}
    to download Content SKG00054.1 under context System]LOG]!><time="11:18:46.413+240" date="07-06-2012" component="ContentAccess"
    context="" type="1" thread="2780" file="downloadmanager.cpp:554">
    <![LOG[Successfully created download  request {2CEK4BA5-FD7D-4529-A04D-95DXE98237566}
    for content SKG00054.1]LOG]!><time="11:18:46.413+240" date="07-06-2012" component="ContentAccess" context=""
    type="1" thread="2780" file="downloadcontentrequest.cpp:824">
    <![LOG[Location update from CTM for content SSKG00054.1 and request {2CEK4BA5-FD7D-4529-A04D-95DXE98237566}]LOG]!><time="11:18:47.069+240"
    date="07-06-2012" component="ContentAccess" context="" type="1" thread="2676" file="downloadcontentrequest.cpp:991">
    <![LOG[Download request only, ignoring location update]LOG]!><time="11:18:47.069+240"
    date="07-06-2012" component="ContentAccess" context="" type="1" thread="2676" file="downloadcontentrequest.cpp:1010">
    Execmgr logs:
    <![LOG[Execution Request for advert SKG200BB package SKG00054 program * state change from WaitingDependency to WaitingContent]LOG]!><time="11:18:46.601+240"
    date="07-06-2012" component="execmgr" context="" type="1" thread="2676" file="executionrequest.cpp:503">
    <![LOG[Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="SKG00054",ProgramID="*",
    actionType 1l, value , user NULL, session 4294967295l, level 0l, verbosity 30l]LOG]!><time="11:18:46.601+240"
    date="07-06-2012" component="execmgr" context="" type="1" thread="2676" file="event.cpp:410">
    <![LOG[Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="SKG00054",ProgramID="*",
    actionType 1l, value NULL, user NULL, session 4294967295l, level 0l, verbosity 30l]LOG]!><time="11:18:46.741+240"
    date="07-06-2012" component="execmgr" context="" type="1" thread="3452" file="event.cpp:410">
    I'm unsure why the advertisement isn't deploying properly, because the properties look identical to previous packages I've sent manually. One thing I may think be the issue is that I'm
    adding the package to a Distribution Point Group which I know may disrupt deployments if a package has already previously been assigned to it I believe.
    $sitename = "SKG"
    Function create-PKGDeployment
    $targetcoll = gwmi -ns "root\SMS\Site_$sitename" -class SMS_Collection | WHERE {$_.Name -eq 'Lab'}
    $collID = $targetcoll.CollectionID
    $collName = $targetcoll.Name
    $PKG = gwmi -ns "root\SMS\Site_$sitename" -class SMS_Package | WHERE {$_.name -eq 'Firefox'}
    $PKGID = $PKG.PackageID
    $PKGName = $PKG.Name
    $AdvName = $PKGName+"_"+$PKGID+"_"+$collName
    [ARRAY]$PackageID = $PKGID;
    Invoke-WmiMethod -Namespace "Root\SMS\Site_SKG" -Name AddPackages -Path "SMS_DistributionPointGroup.GroupID='{1PKU8557-9153-4C39-8DHK-DB0C53H801BA}'" `
    -ArgumentList ( ,$PackageID)
    $Format = get-date -format yyyyMMddHHmmss
    $Date = $Format + ".000000+***"
    $AdvArgs = @{
    AdvertisementName = "$AdvName";
    CollectionID = $collID;
    PackageID = $PKGID;
    SourceSite = $sitename;
    ActionInProgress = 2
    PresentTime = $Date
    ExpirationTime = $Date
    PresentTimeEnabled = $true
    ProgramName = "*";
    AdvertFlags = 33751072;
    RemoteClientFlags = 2128;
    TimeFLags = 8193
    Set-WmiInstance -Class SMS_Advertisement -arguments $AdvArgs -namespace "root\SMS\Site_$sitename" | Out-Null
    Create-PkgDeployment

    I created advertisement. I am trying to use powershell script o change advertisement start time and mandatory time and expiry time. I am using sccm2012 r2 cu2. I can able to change advertisement start time and expiry but not mandatory through powershell
    or vbscript. In our environment we have more than 50+ advertisement schedule by daily bases. Can you help me how to change mandatory assignemnent time using script or powershell
    Example: Advert start time:08/08/2014 11:00AM
    Expiry Time 08/09/2014 6:00AM
    Mandatory time: 08/08/2014 09:00PM. If you need any more info let me know

  • How to remove a device from my adobe id counter?

    Hello together,
    I use my sony ereader with my adobe id for several years now, and have already used three different pc's with this same id to load my ebooks to the reader. Since the number of devices that can be registered with the same id is limited to 6, I really need to remove the id from two of these pc's that are not alive anymore to register a new device. How do I do that?

    If you still have the old devices/computers you can deregister them.
    For a computer running ADE, ctrl-shift-D (cmd-shift-D on Mac)
    For an ereader device, connect it to a computer running ADE, then ctrl-shift-E (cmd-shift-E on Mac)
    For a tablet, find instructions for the app you are running.
    Unfortunately, deregistering does not always free up the slot to allow for more devices as is should.
    In that case ...
    ~
    Adobe Live Chat: http://www.adobe.com/support/chat/ivrchat.html,
    or as a slight short cut try http://helpx.adobe.com/contact.html?product=digital-editions&topic=using-my-product-or-ser vice
    Click on 'I still need help' and then you should see 'Chat with an Agent' at the bottom of the page.
    'Ask our experts' will indeed just lead you back to this forum.
    Sometimes you will get ‘Sorry! All agents are busy— please check back soon.’
    Don’t refresh the page, just hang on and it should eventually go to ‘Chat Now, and agent is available’.
    They can reset your authorizations, and then you must reauthorize any devices you still need.
    (Unfortunately, Adobe haven’t got round to an admin website for viewing and editing authorizations.)
    Some of the representatives haven't been properly trained and don't know what to do (and claim there is nothing they can do);
    in that case the only way seems to be to give up that chat and try another session hoping for a properly trained representative.
    If your problem is with another device using Overdrive, Bluefire, Aldiko or similar third party app, it is recommended not to mention that app when on the chat, just mention that you have run out of authorizations  (E_ACT_TOO_MANY_ACTIVATIONS) .  Thanks to AJP_Bear for that tip.

Maybe you are looking for