Remove network device inventory from SCOM database

Hello Gurus
I have a quick question. I think one of the internal connectors in my SCOM environment has got deleted by mistake. As a result all the network devices that were being monitored previously has now disappeared. I believe because they were present in the database,
I can't discover them now. Is it possible somehow to list those network devices from the database, and then delete them, by using powershell and/or SQL.
Any help in this regard will be greatly appreciated.
Regards,

You can delete them by:
In the Discovery Rules option under the Administration Tab, you will be able to see all the network devices that are discovered. This shows the devices that are discovered and currently getting monitored in SCOM. You can select multiple devices and then
remove them.
Then Run in powershell Get-RemotelyManagedDevice to check that all Network devices deleted.
you can also check below link to remove/restore network device
http://technet.microsoft.com/en-us/library/hh212795.aspx
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"

Similar Messages

  • How to remove network devices through powershell? (scom 2012)

    Hi
    Could anyone says how to delete network device in SCOM 2012 through powershell?
    In 2007 we have Get-RemotelyManagedDevice.
    I have a big number network device in monitoring and now need delete some of them with specific filter, all switches.
    How to do it?
    Thanks
    Alex

    The devices were discovered by an old Management Server that was reinstalled.
    I finally got those devices out of my SCOM environment using this SQL query (just replace networkdevicename):
    UPDATE
    BaseManagedEntity
    SET
    isdeleted=1
    from
    BaseManagedEntity where
    BaseManagedEntityId in
    (select
    BaseManagedEntityId from
    BaseManagedEntity where
    displayname like
    '%networkdevicename%')

  • How to remove only one row from the database using labview6.1

    using labview 6.1 I create a table with various rows and columns and store bulk of data's in them.,, what procedure should I follow to remove only one paticular row from the database? Help me out with an example please,,
    Thanking you in advance!

    Hi,
    If you have the database toolkit you can delete a row using just a SQL Query to "DB Tools Execute Query.VI"
    Example:
    DELETE FROM Table name Where SerialNum='Value' And Date='Value' And Time='Value'
    See also attached VI
    Best Regards
    Johan
    Attachments:
    Delete_a_row_in_a_database_table.vi ‏48 KB

  • Removing "Not Deleted" Mailboxes from a Database

    Before I go anywhere, let me explain what I mean by "Not Deleted" mailboxes - We will be deleting and recreating a pair of databases this weekend. A s part of this process, we move all mailboxes from these databases to the other 22 mailbox databases
    in the corporation, leaving our databases empty.  We then run a command to find the soft-deleted and disconnected mailboxes and handle them (remove the former and reconnect the latter so we can move them to another database).  When I ran this script
    on one of the two databases, I found that the database had two supposedly live mailboxes on it.
    So I ran Get-MailboxStatistics -Database and got info about these two mailboxes.  Neither shows as being SoftDeleted or Disconnected, and neither has a DisconnectDate.  So they should be live mailboxes, with an AD account.  So I checked them
    and found one had an account - but was on another database on a totally different server (in fact, in the other DAG).  And the other belonged to an account that was deleted last November.
    So, these two mailboxes appear to be zombies, with no life and no soul, but doomed to foil my plans to delete the database gracefully - they are all that stands between me and the success of my mission.  Now, I know I can take the database offline,
    delete the database files, and bring them back online and that will kill these zombie mailboxes, but I was hoping someone had a way I can delete them gracefully so I don't feel like I've just used a sledgehammer on my servers.  I tried Remove-StoreMailbox,
    but it requires that the mailbox have a status of either SoftDeleted or Disconnected - and from what I've read online, those are the only two accepted options.
    So I come to you for possible guidance - keep in mind that these are totally unnecessary mailboxes and I have no qualms about deleting the database if that what it comes down to.  Anyone have any other suggestions?  Thanks ...
    Will

    There were two active mailboxes showing from the "Get-MailboxStatistics -Database <database name>" command, even though the database showed no active mailboxes when running "Get-Mailbox -Database <database name>" command.  Neither of these
    had a disconnected date, and neither showed a value in the Reason field.  Now for your answers:
    1.  One of these mailboxes showed as being on another database, same GUID, etc, and was able to be accessed on that other database.  However, Get-MailboxStatistics - Database <database name> showed that it also existed on this database. 
    We couldn't connect an account to this mailbox, nor could we delete it - the command (below) said the mailbox was on another database (which it was).
    Connect-Mailbox -Identity <mbx GUID> -Database <name of the database we wished to delete> -User <account SAM account name> -Alias <account SAM account name> -Shared -DomainController <domain controller>
    2.  The command was what I show above.
    Post Mortem:  Since we had to delete the database, and since neither of them were needed, we just went forward with our work.  I was hoping we'd be able to remove these mailboxes gracefully, but none of the tools we had available worked for the
    job.

  • Range expander not displayed in network device list from Router

    My range expander seems to be working properly, blue lights, and improved signal in dead zone.  However, I noticed when viewing my network devices from the router settings it did not list anything located at 192.168.1.240.  I was wondering why that would be when the expander is working properly?  Shouldn't the router show it as a connected device?
    Thanks.
    Solved!
    Go to Solution.

    I wouldn't worry about it. Mine doesn't either. I assume because it is set up like the router as a repeater that it is kinda like a "ghost". I know it is there because I can ping it and access it at 192.168.1.240 in the browser. If you want, you can download the LELA network management software. That will pick it up.
    Message Edited by Luckydog on 01-30-2009 05:53 AM

  • How to remove(Delete) multiple agents from SCOM console

    Hello Experts,
    We are using scom 2012 and monitoring around 10000 agents in our environment.  Now Windows team decomissioned around 1000 server/clients and we need to remove those agents(grayed agents) from console.
    It is very difficult to find and delete the agent one by one.  Is there any script to remove/delete the agent from console?
    Thanks in advance.
    Regards
    Karthick

    Hi,
    In addition,several ways to remove SCOM agent if SCOM console fails.
    1. Add/Remove Programs (appwiz.cpl)
    2. Run (MsiExec.exe /uninstall {E7600A9C-6782-4221-984E-AB89C780DC2D} /quiet)
    3. psexec -d MsiExec.exe /uninstall {E7600A9C-6782-4221-984E-AB89C780DC2D} /quiet *
    Here are some links about using PowerShell remove Agents:
    - http://support.micro...b/2626752/en-us
    -  http://technet.micro...y/hh545186.aspx
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • 6230i - Removing network provider name from screen...

    Hello,
    I've got a 6230i with Vodafone.
    I would really like to remove the word Vodafone from my screen as it has a gorgeous picture of my new baby grandson on it.
    I've been through all the settings but I can't find anything, when I think I've found the appropriate section it says OFF already.
    Any help appreciated, Thank You.

    I have the same problem, please help!
    http://wap.mob453.com/blanklogo/ - Does this thing work?Message Edited by grandchamp on 02-Jul-2006
    04:00 PM

  • How can I remove a Device PIN from my account?

    I sold my Q10. The Buyer is in my contact list and his data is always integrating in my own contact data including the PIN.
    How can I unassign the BB PIN from my BBID Account?
    Thanks in advance.
    Solved!
    Go to Solution.

    There actually were several steps that should have been conducted before selling it...refer:
    Article ID: KB05099 Steps to take before selling or after buying a previously owned BlackBerry smartphone
    The on-device WIPE would have taken care of removing the association between that device and your BBID. Then you could simply use that same BBID on a different device, and that person would have no ability to use that same BBID since they would not know the password.
    It is possible (a feature!) to have more than one device on a single BBID, but the result is what you are experiencing. So, I believe the only remedy is that the new owner needs to WIPE that device and start over, leaving you with sole control over your BBID.
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Cannot remove "Network Device" with Easylink Advisor

    Hi,
    I have a device that i cannot remove.  When I click on the tab for options I see "Details", "Rename", and "Track as Intruder" but not "Remove".  I have the option to "Remove" from my acknowledged devices but not this one.  This is on a PC with XP running Advisor version 3.11.
    Any suggestions?
    Thanks.

    Easylink Advisor does not have the option to "Remove".
    You can try uninstall and re-installing the software once.

  • Network device inventory SCCM 2012 R2

    What is the best way to create an inventory report of all snmp devices using SCCM? I am trying to do as much as I can with a single tool.

    ConfigMgr is not a good tool for this IMO.
    Ultimately, you *could* enable network discovery to discover SNMP devices, but this feature hasn't changed in 10+ years and I would never use it for this.
    Jason | http://blog.configmgrftw.com | @jasonsandys

  • Network device configuration for SCOM 2012 Network Resource Pool

    We are planning for two management servers in a Network Resource Pool.
    So(considering failover situation) to send traps to both devices do we need to configure both management servers as SNMP servers on these devices?
    If yes, Then it will definitely need double traffic for sending traps to two devices, isn’t it?
    What SNMP server name we should use while configuring devices?
    Thanks,
    Vinayak

    Hi,
    >So(considering failover situation) to send traps to both devices do we need to configure both management servers as SNMP servers on these devices?
    Yes, you need to configure both management servers as a trap recievers.
    >If yes, Then it will definitely need double traffic for sending traps to two devices, isn’t it?
    That's right.
    http://OpsMgr.ru/

  • Removing account and files from mail database

    Hey all - I'm a bit of a noob when it comes to administering mail on os x leopard server. i am in the process of migrating from courier to osx mail service and one of my concerns is that i do not know to remove a users e-mail. in otherwords, what else do i have to do other than to delete the user from workgroup manager to make their mail go away. i've monkeyed around and found that even if i delete them from WM their mail information sticks around.
    thanks so much!

    Maybe you try to put yourself in the position of somebody helping hundreds of users. I don't think my time is particularly well spent in looking up links that are easily found with a a tiny bit of effort. (The download link is about 1/3 down the page I linked to above). The link and instructions/tips on using it are also present in several discussion topics on this board.
    I usually even answer questions which have been asked over and over again, as I fully understand that it is not always easy to find information and sometimes an answer might sound different when given in a different context. Especially to those that don't have much experience with servers.
    But when somebody is too lazy to find information and then considers me a ... and passive-agressive because I pointed out that googling it would have helped, I can only shake my head.
    Good luck with your server.

  • Exchange 2010 remove one device from ActiveSyncAllowedDeviceIDs

    Hi,
    I am wondering if there is a way to remove one device ID from the ActiveSyncAllowedDeviceIDs. I run "get-casmailbox -identity useraccount | format-list" to determine the number of devices in the ActiveSyncAllowedDeviceIDs field. The user may
    have multiple devices in this list. I simply want to remove one of these device. I know I can run "set-casmailbox -identity useraccount -ActiveSyncAllowedDeviceIDs $null" , the problem is that will clear all devices.
    Thanks
    Andy Stoyles

    You must have ActiveSync quarantine enabled. When you approve a device that was quarantined, it will be added to the ActiveSyncAllowedDeviceIDs
    list. If you were to run the above Remove-ActiveSyncDevice command, it will delete the device
    association from Exchange which is good, but it doesn't clear the device from the ActiveSyncAllowedDeviceIDs list.
    This is an issue, if the user attempts to setup the same device again with ActiveSync they are able to bypass the quarantine because the device still remains on the ActiveSyncAllowedDeviceIDs
    list.
    I hope this helps

  • Remove RMAN information from target database control file

    Dear Gurus,
    Can any one inform me that how I can remove RMAN related information from Target database control file without recreating the control file.
    Regards,
    asif

    I want to remove all RMAN related infromation from control file including the destination specification where backup sets were being created becuase that destination is no more available,
    configuration information also need to be removed from control file without recreating the control file.
    kindly help,
    regards,
    asif

  • Network devices discovered but not managed

    SCOM 2012 R2 management group. A dedicated network monitoring resource pool consists of two MSs. These two MSs have been removed from AMSRP and other two default resource pools (AD.., Notification...) - is this correct?
    Two discovery roles:
    role1 runs on GWS1 discovered (explicitly) 5 devices and shown all "healthy". This rule was using AMSRP to monitor, but changed to the dedicated pool after it was created.
    role2 (added after the dedicated resource pool was created) runs on GWS2 discovered (explicitly) 2 devices but shown as "not monitored"
    How to find out what's wrong? (log files etc?)
    Anything need to check with the resource pool settings?
    Thanks.

    Hi,
    Do you mean that you have discovered the two network devices on your Management server, but it is not monitored.
    This issue maybe caused by the proper management pack was imported, please go through the below article to get more information about how to monitor network device by using SCOM:
    http://technet.microsoft.com/en-us/library/hh212935.aspx
    Network Monitoring using System Center Operations Manager 2012
    http://blogs.technet.com/b/rohitkochher/archive/2011/11/26/network-monitoring-using-system-center-operations-manager-2012.aspx
    Regards,
    Yan Li
    Regards, Yan Li

Maybe you are looking for

  • Jabber 9.6 Cannot Currently Add the Contacts

    I'm running Jabber for Windows 9.6 with Jabber Cloud (formerly WebEx Connect).  I have all my internal users in addition to a large number of external contacts including Cisco employees and some of my clients.  Today I was adding 2 contacts at anothe

  • Condition Type for Purchase order

    Dear All, I have one query about condition type at item detail level in purchase order. Please let me know how to disable any condition type for purchase order. I have already tried it in, SPRO->Materials Management->Purchasing->Purchase Order->Defin

  • My iPhone 4 lock button doesn't work

    My lock button on  my iPhone 4 doesn't and my Facebook app kickes me off all the time and so does wifi. I got the apple iCare plan and i was wondering if i could either get it fixed or trade it in 4 the new white one it looks so much better.

  • After installing Mountain Lion finder quits when I open desktop folder - why?

    After installing Mountain Lion, finder quits when I open desktop folders.  Not all folders..  I does it to new ones.

  • DAQmx Timing

    Dear all, I have this following VI solution that stems from the LabVIEW example for Continuous Digital Data Output. The issue concerns the System Clock - when set to a low sampling rate value (say, 1S/s), the rate seems to be much higher. The LED ind