How to Run Rman in silent mode

when i run rman command to connect with the database then I get the following information message,
Recovery Manager: Release 10.2.0.1.0 - Production on Wed Mar 26 15:38:45 2008
Copyright (c) 1982, 2005, Oracle. All rights reserved.
connected to target database: MYDB (DBID=2563653631)
Can i avoid this message and run it in silent mode ?

On Windows, I am able to use this command :
rman < rman_backup_script.rmn > rman_backup.Logwhere the script file rman_backup_script.rmn contains
connect target /
backup database plus archivelog;The backup does run. It creates backupsets. It also creates rman_backup.Log which
contains these output lines :
Recovery Manager: Release 10.2.0.3.0 - Production on Sat Mar 29 23:11:28 2008
Copyright (c) 1982, 2005, Oracle. All rights reserved.
RMAN>
connected to target database: OR10G2DB (DBID=138573118)
RMAN>
Starting backup at 29-MAR-08
current log archivedand do so on.
No screen output at all.

Similar Messages

Error when running netca in silent mode

I found a type-o in Oracle's documentation for running netca in silent mode. See link:
http://download-west.oracle.com/docs/html/B10811_05/app_nonint.htm#BABJFJID
There is a line that reads:
$ORACLE_HOME/bin/netca /silent /responsefile=/local_dir/netca.rsp
However, it should read:
$ORACLE_HOME/bin/netca /silent /responsefile /local_dir/netca.rsp
Hope this saves you all lots of headaches!
--Julie Johnson

user8909477 wrote:
i am running netca command in linuxGreat. But WHICH Linux???? Surprisingly it makes a difference. Just like asking to talk to a person, and specifying by family name, you might get the mother, the father, the son - and each might give a different response.
>
in /u01/oracle/TEST/db/tech_st/11.1.0/network/admin
i am going to TCPs litener with port 2484.
following error is appeared
so please Guide me to solve this problem.
Oracle Net Services Configuration:
Xlib: connection to ":0.0" refused by server
Xlib: No protocol specified
Are you logging on as root? Are you SU'ing to Oracle or trying to run as riit?
Try logging out - all the way out. Don't stop there, you need to log ALL the way out.
And then log in as user Oracle.
Logging in as root causes all sorts of headaches. Only SU to root, and then only when you absolutely need it.
Now that you have logged out of root, and logged in (not just su'd) to oracle, what happens??

How to run labview in debug mode

Two questions:
1. how to run labview in debug mode
2. how to save default text values in labview

Hi,
consider i have streaming bits of data as input who length varies each time. I need to select 11 bits at a time and apply (15,11) hamming coding for the inputs till the input is stopped.
I have designed the hamming encoding and decoding block. I need a methodology to select 11 bits at a time from the input and provide to the hamming encoder.
eg: if input is 1100 bits, output must be 1500 bits.
I have uploaded the encoder and the decoder part. Please suggest me the design to read the input and append the output.
Attachments:
project_HammingEncode.vi ‏19 KB
project_HammingDecode.vi ‏22 KB

How to run SPAU & Custom Objects Mod

Hi
I am new to upgrade , Can anyone guide me how to run
SPAU & Custom Objects Mod
Thanks
Parin
Moderator message: please search for available information/documentation.
Edited by: Thomas Zloch on Oct 30, 2011 10:41 AM

Hi Ramana,
what kind of report you want to execute? the report is Executable Report or Modulepool prog. ??
if it is a executable program so when u execute (F8) from SE38 when u find the selection-screen in the menu bar ->Program ->Execute in Background( F9) option exits there u can schedule your report in Background or else use toce SM36 ( Define Background Job).
Why you want to run it in background with transaction code if you have this options?
Regards,
Sunil kairam.

How to run in 32 bit mode on a mac 10.6.7 so I can use Rapport Trusteer

The security software Rapport Trusteer for HSBC bank has just been updated to run on Firefox 4 but will only run in 32 bit mode, I am using Snow Leopard 10.6.7. How do I change Firefox 4 to run in 32 bit mode?

You're welcome

How to detect programmatically the silent mode?

Hi
How are you?
I am iOS developer.
I need your help.
I am going to detect programmatically the silent mode in iPhone for iOS7.
How can I get programmatically it ?
Please help me.
I will wait your response.
Thanks.
Regards.
Wang.

Try the developer forum. You'll find many like minded people there to assist you with questions. Most of the people in this forum are end-users.
http://developer.apple.com/devforums/

How to install patch in silent mode

All,
I need to install Oracle patch 40 (oracle version 11.1.0.7) in silent mode. Please suggest method.
As per oracle it says its documented in Readme.txt but i can't find that information.
Thanks in advance

What patch is this ? PSU/CPU or a upgrade ?

How to run KinectFusion in offline mode?

I've set KF into CPU mode, and I've got a video captured by Kinect. Then which part of KinectFusionExplorer-D2D should I change to run KF in offline mode with this video?

What exactly are you trying to do, since the api's don't provide an offline mode just a CPU or C++ AMP implementation of the calculations needed.
Carmine Sirignano - MSFT

How to run powershell in adminsitrator mode using invoke-command

Hi,
I'm trying to run the below script from the remote machine I'm getting the output as below and the msnpatch.exe is not getting executed on the remote machine(testserver).
When I run the same command on the testserver, a new powershell session is getting opened and able to run msnpatch.exe.
So, how to invoke powershell in runas administrator mode and run msnpatch.exe on that administrator window is my question.
Thanks for your time. Your reply is highly appreciated.
Script:
Invoke-Command -ComputerName testserver -ScriptBlock {
$myWindowsID=[System.Security.Principal.WindowsIdentity]::GetCurrent()
$myWindowsPrincipal=new-object System.Security.Principal.WindowsPrincipal($myWindowsID)
$newProcess = new-object System.Diagnostics.ProcessStartInfo "PowerShell";
$newProcess.Verb = "runas"
$newProcess.Arguments="-noprofile -command msnpatch.exe"
[System.Diagnostics.Process]::Start($newProcess)
Output:
PS C:\Users\v-sridal> Invoke-Command -ComputerName 1f4-00073 -ScriptBlock{
>> $myWindowsID=[System.Security.Principal.WindowsIdentity]::GetCurrent()
>> $myWindowsPrincipal=new-object System.Security.Principal.WindowsPrincipal($myWindowsID)
>> $newProcess = new-object System.Diagnostics.ProcessStartInfo "PowerShell";
>> $newProcess.Verb = "runas"
>> $newProcess.CreateNoWindow = "true"
>> $newProcess.Arguments="-noprofile -command msnpatch.exe"
>> [System.Diagnostics.Process]::Start($newProcess)
>> }
>>
Handles NPM(K) PM(K) WS(K) VM(M) CPU(s) Id ProcessName
PSComputerName
4 4 244 1156 8 0.06 4968 powershell
testserver

There is no elevation when running remotely. UAC only affects local sessions. You cannot elevate a remote session.
¯\_(ツ)_/¯

How to run eCATT in dialog mode(foreground) without user interaction(Enter)

Hi,
As part of performance testing using eCATT we want to execute a test script in dialog mode(foreground) without user interaction like pressing enter at end of each screen. The reason behind this is we want to run a test script 1000 times in dialog mode to analyze the performance of that particular transaction code. Hence its not practical to keep pressing enter at end of each screen. We do not want to execute this in background as that does not simulate the real time transaction processing and give the exact performance analysis.
We have a test script with VA01 recording and are able to execute it perfectly in background as well as foreground (by pressing enter at end of each screen).
I would like to know if there are any settings to be made to execute the test script in dialog mode without pressing enter. I have referred the below link which has not solved my purpose.
ECATT - Running in Foreground (Enter Key)
Thank You.

Gopi,
I never used this transaction before, but my approach would be as below. You may want to try and let me know how it works.
Before running this script from ST30, first try to run from SECATT for one iteration to make sure the script and target system RFCs are working. Then try again in ST30. Still if you have the issue, ask your basis to take a look when you kick off from ST30 in the target system whether ST30 were able to successfully make the RFC call to that system.
thanks
Venkat

How to run forms in iview mode

i tride to run my forms in iview mode i got following message
frm-18121 the java bean, does not implement the iview interface
cause : for forms to use this java bean, it must be implement oracle form iview interface
Action : implement oracle forms
oracle.forms.ui.iview.interface
i would like to know how to implement this action
please suggest step by step.
thanks

Please clarify what you mean by "Runing Forms in iView mode" - iView is a Java interface that any PJC or JavaBean that you want to plug into Forms on the web has to implement.
See the document
http://otn.oracle.com/products/forms/pdf/forms_in_java_world.pdf
al lot of this applies to 6i as well as 9i

How to run report RPTQTA00 direct mode via FM SUBST_START_REPORT_IN_BATCH

Hello Experts,
I am using SUBST_START_REPORT_IN_BATCH to generate absence quotas for the employees using report program RPTQTA00. But it is taking too much time. I want to use RPTQTA00 in direct mode but I dont know what settings I need to do before using this method. Please guide me on this.
Thanks in Advance
Pratibha
Edited by: pratibhas on Jan 27, 2011 1:57 PM

Hi,
I suggest you not to use the "E:\" directory letter, but the REPORTS_PATH instead.

from the Online Help


On Windows, edit environment variables through the Registry Editor (Start > Run > Regedit).


On UNIX, edit environment variables by revising and running the shell script that defines the initial default values (reports.sh). If you do this, be sure to keep a backup of the original, unaltered reports.sh file.


Regards
JeanYves

How to run rman with cron under RHEL3?

I am exhausted with all my options and knowledge with this. Tried 2 days with all possibilities, but failed. I have a Oracle 10g r2 (10.2.0.2) on a RHEL3 box. I wrote an orabackup.sh file as
rman target sys/pw@backup nocatalog <<EOF
run
{ backup as backupset incremental level 1 cumulative device type disk tag 'Thu_full_bkup%LEVEL_1' database;
recover copy of database;
backup device type disk tag 'Thu_full_bkup%LEVEL_1' archivelog all not backed up;
delete noprompt obsolete device type disk;
exit
EOF
I have tried this with cron (crontab) under both oracle and root env with $PATH containing the $ORACLE_HOME/bin as the first. The cron job under the crontab is as
44 17 * * * "/home/oracle/orabackup.sh >> /home/oracle/rmanbk.log 2>&1". And it kept returning with either "RMAN: command not found" or the "/bin/sh: line 1: /home/oracle/orabackup.sh >> /home/oracle/rmanbk.log 2>&1: No such file or directory". I had included su - oracle -c in the either script or cron job with or without quote, but result the same error. Does not matter the cron phrase was /home/oracle or without it. Some sites suggested to enter the #!/bin/sh as the first line of the script, tried that and failed too. So what exact I should phrase both the script and cron to let it run automatically. I could run the script manually under either oracle and root env.

I'll try to rephrase. There are (at least) three cases:
1. When you login with a terminal (e.g. with telnet, ssh) then the file ".bash_profile" is run automatically if your default shell is bash (check $SHELL to verify). In this case your personally-configured $PATH will be known with no effort on your side.
2. When a script is run by cron through crontab, then no login script is run automatically. In that case, you need to explicitly tell the script to run your login script, i.e. ".bash_profile". Otherwise, $PATH will not include $ORACLE_HOME/bin.
3. This case was not discussed before in this thread: When cron runs a job following "at" or "batch" commands, then the job will know all exported variables that were defined in the executing session. This shows that running a script with "at" is not a sufficient test before letting it run through crontab.
I may have not been perfectly correct here. It's best if you read the manuals for "bash", "at", and "cron" to know all about the subject.

How to run Oracle data pump export in silent mode

when i run the expdp command for data export, then i get the following information message,
Export: Release 10.2.0.1.0 - 64bit Production on Wednesday, 26 March, 2008 15:33:49
Copyright (c) 2003, 2005, Oracle. All rights reserved.
Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - 64bit Production
With the Partitioning, OLAP and Data Mining options
Starting "TEST"."SYS_EXPORT_TRANSPORTABLE_01": test/********@mqa dumpfile=data.dmp directory=export TRANSPORT_TABLESPACES = client_tables,client_indexes logfile=export.log
Processing object type TRANSPORTABLE_EXPORT/PLUGTS_BLK
Processing object type TRANSPORTABLE_EXPORT/POST_INSTANCE/PLUGTS_BLK
Master table "TEST"."SYS_EXPORT_TRANSPORTABLE_01" successfully loaded/unloaded
Dump file set for TEST.SYS_EXPORT_TRANSPORTABLE_01 is:
/export/home/oracle/TQAImport/DataFiles/data.dmp
Job "TEST"."SYS_EXPORT_TRANSPORTABLE_01" successfully completed at 15:34:53
Can i avoid these messages and run it in silent mode ?

I am not really sure about this but try using LOGFILE option.I cant recall that I have used than what happens,whether the output comes to the logfile only or on both the places but in addition to Paul's solution which are more accurate,you can give this also a try.
http://download-west.oracle.com/docs/cd/B12037_01/server.101/b10825/dp_export.htm#sthref133
Aman....

Running netca in silene mode to set up ldap for using OID

Hi,
I'm not sure if this is the right forum for this posting....
Our customer is in the process of automating the installation of their Oracle environment including the database, app server, and OID.
I'm in the process of looking into how a .rsp file would be configured to configure ldap and the OID directory server running NETCA in silent mode.
I'm a little confused about how this would be done because the only thing I've been able to see so far is adding LDAP to the NAMING_METHODS parameter in the rsp file.
Does anyone know how the other information (ie: Directory type, Directory service info, Oracle context, etc.) would be specified?
Thanks very much in advance,
Beth
Message was edited by:
brumpf

Hi,
Thanks so much for the feedback. But I finally found what I was looking for in the Oracle Database Net Services reference.
The parameters for the response file are:
DIRECTORY_SERVER_TYPE=oid
DIRECTORY_SERVERS=<host:port[<ssl port>]
DEFAULT_ADMIN_CONTEXT="DN for the server"
It was right in front of me the whole time and I didn't see it.... ugh!
Thanks again!
Beth
Message was edited by:
brumpf

How to Run Rman in silent mode

Similar Messages

Maybe you are looking for