How to seeting Delivery tolerance for the material

Dear,
Right now i m working with SAP PROCESS INDUSTRY.
I post auto GR at the time of my last phase confirmation.
What is this delivery tolerance relevant to the movement type 101?
How i have to configure delivery tolerance in my system for the GR(101).?

Hi,
the Delivery tolerance can be restricted in Material Master or Order itself.
If you want to do unlimited delivery then in OPK4, Over delivery - Set as Do not check..
I guess there is no separate Customization for 101 Movement.
What ever you do in th above said settings every thing refers to 101 Movement only.
Hope this clarifies..
Regards,
Siva

Similar Messages

Delivery number for a material document posted

Hi experts,
I need to delivery number for the material document number posted,
I tried to use the field XBLNR from the table MKPF
but i see that the feild is empty in the case of inbound delivery
why is it so.
How ever i can get the data from VBFA ,but can any one tell me the reason why XBLNR is empty in case of inbound delivery.
Thanks a lot in Advance.

Hi,
If you do GR w.r.t. Inbound Delivery No in MIGO then it will not update "Reference" field i.e. XBLNR.
To update same with Inbound Delivery No, you have to do "Post Goods Receipt" from Inbound Delivery Document itself in VL31N or VL32N.

Cost variance for the material master

Hi all,
This is very urgent requirement.
How to maintain cost variance for the material master?
I will assign the points
venu

Hi,
Material Variance key will be assigned in Material master Costing data tab
Best Regards
Ashish Jain
Message was edited by:
Ashish Bohara

How to find Delivery numbers for a range of Material Documents

Hi,
Could anybody please let me know how to find the delivery numbers from a range of material documents based on a given delivery date.
Regards
Kasi

Hi,
there is an index table for deliveries by material:
VLPMA
Select the delivery numers using the material range from VLPMA.
Regards,
Clemens

How to get the delivery number for the sales order

hi
how to get the delivery number for the sales order

Hi,
1. IN VA03, enter the sales order and click on the document flow button. From there you can check the delivery document.
2. In SE11, enter VBFA(Document flow) table and enter the sales order in VBELV field and in VBTYP_N field enter 'J' to specify that you want to check if there is already a delivery document for that sales order.
Hope it helps...
P.S. Please award points if it helps...

How to set up the inspection plan for the material in super BOM

Hello,
how to get the accurate inspection plan of the IQC for the material which was class item in a super BOM?
I've gotten the characteristic value from the sales order, and get the PO after MPR. The problem is how to specify the target value and the range of inspection characteristic in inspection plan, because the value is temporary?
Thanks!
Lin

Hello,
I think you need to create MIC which linked with the configuration characteristic, and specify "inspection by configuration" for the inspection type.
then the configuration value in the sales order can be transfered to the inspection lot when production released or goods receipts if you use inspection type 03 or 04. that means the value range for the MIC will be determined dynamically for each sales order.
Regards, Winnie

How to Find Vendor for the material before posting a PO

Hi,
I am using BAPI_PO_CREATE1 to post a PO(ME21N), in the order to fill header data I need to give Vendor information. I have filled that data with one ZTable and executed. When i executed the BAPI, it gave me result as "VENDOR is declared as some thing else for the material". Now my Query is how to know the vendor the particular material.
Even MSEG is showing no vendor.

Hello Krishna,
I do not think there's any direct assignment between a material and a vendor. And I would be surprised if there's one. Let's say there are 4000 materials and 600 vendors in an R/3 System. Doesn't it sound needless to maintain for each material all the vendors ?
Just go to the Purchasing tab for a material (MM03) and also refer to the Purchasing data for a Vendor (XK03). you will see that there's something called a <i>Purchasing Group</i>, which is common to them both. Now just read the F1 help for this field.
Regards,
Anand Mandalika.

How to configure Alpha Numeric No range for the Material Type

Dear Expert,
i kindly request for expert help on alpha numeric no range for the Material Type.
business is looking for material no like 910442208571D. at present we have no range like 9000000000000 to 9999999999999
how i can configure in the system??
pl. help me on this
Thanks a lot
H shah

Hi,
System will not bring alphanumeric number of materials automatically during MM01.
Check use exit MGA00002 - Material Master (Industry): Number Assignment.
Also check 2 Function Modules:
EXIT_SAPLMG02_001 - Customer Exit: Internal Material Number Assignment
EXIT_SAPLMG02_002 - Customer Exit: External Material Number Assignment.
Regards,
Biju K

Service billing for the material and service registers

Dear All,
I have doubt, if i do a sale of material 'X' and for the same material if i have to do a service invoice for rendering some service at the customer end. eg:- service charges for transportaion of the material to the customer place, doing installation charges for the material at the customer end etc.,
how should i go about it in SD .
A. Should i have to create a seperate mm master record for the list of service with the item category group LEIS
B. or is it possible to do a service invoice with out creating a sales order i.e directly based on the billing of the material 'x'
C. Is there any service tax register standard available. or if i wanted to create a service master should i have to ask the abaper to develop a z program for it
d. is this tcode can be used S_ALR_87012357 for service tax registers?
kindly update me on this
thanking you in advance
kumi

Hi
You need to create a material with item category group
a) LEIS (Service without Delivery) or
b) DIEN (Service with Delivery)
Based on the same you could bill the customer.
... Please.
with kind regards
Sundar

Over Delivery Tolerance for schedule agreements

Hi,
we have overdelivery tolerance of 10% in schedule agreement and system is allowing to do GR for more the the over delivery tolerance.
can any one tell me how to get the error message while doing GR for more than the over delivery tolerance in case of schedule agreements.

See OSS Note 874264 - MB01/MIGO: Default quantity for goods receipt posting
3. The basis used for calculating the over or under delivery tolerance is the quantity ordered, in case of purchase orders, and the suggested quantity, in the case of scheduling agreements. If you want the system response to be the same for scheduling agreements as it is for purchase orders (that is, you need more generous tolerances) see also the SAP Consulting Note 741385.
For items with a confirmation control key, the basis for the calculation of the over or under delivery tolerance is the quantity ordered or the total of the schedule line quantities.

How to know how much quantity is available for the batch ?

hi all,
I am doing a batch split on delivery item....but when i enter the batch and quantity ( say 500qty) it says Zero quantity available for the batch....
<b>How to know how much quantity is available for the batch for that material</b> so that can we use the batch during batch split.....because batches are attached to a handling unit as well.....
regards,
Subba

HI Subba,
You can know this Thr MMBE Transaction Code
Reward if it helps
regards
Srini

How to extend Sales org for a material being Changed

Hi Experts,
i need to extend sales org , distribution Channel for a material .
my table look like this and having 6 fields shown below
1 2 3 4 5 6
Sales org | Des | Distn Chnl | desc | Copy from So | Copy from Dstn Chnl
If the user enters the existing value in Copy From SO and Copy Fron Distn Chnl . Then i need to copy all the values corresponding to the Existing SO and Distrn Chnl to the Newly entered Sales Org .
the table im displaying in ALV , if user perss F4 in copy From SO and Copy From Distn , i need to show the existing values for the material being changed , this is working fine and i am able to get the existing values.
After user selects one of the existing value for SO and Distrn channel , i need to copy all the values to newly created So and distrn Chnl .
i dont know how to proceed . Please help me to solve this problem.
Thanks,
Shrikanth

You can use AET to extend the sales area data of BP. However, it wont add the fields automatically in GUI, But the generated fields are available in the relevant DB tables.
BP GUI transaction is no more supported . Im not sure why you want to work on GUI.
Regards,
Shaik

Error :Maintain pricing conditions for the material for the excise invoice

Hi
i have maintained excise data for material, after that i have created scheduled agreement with lp and with 0 value private and dummy tax code and delivery schedule is released. Now when i do the goods receipt i am getting error " Maintain pricing conditions for the material for the excise invoice date
Message no. 8I629" can some body can help me.
with regards
Narendra kumar

Hi,
goto tcode fv11 u have to maintained the condition.
first enter the condition type like jmop -
then enter, next screen u have the select the below comination.
select the plant/vendor/material base u have to maintain the conditions.
Thank's
MVS

Standard cost estimate could not be found for the material

Dear All,
We have 4 manufacturing plants and 30 sale depots. We are maintaining price control (S) for FG and SFG in Manufacturing plants,price control (V) at depots for the same material code. we are getting an error message " standard cost estimate could not be found for the material" while doing billing at depot.
Please give me suggestion.
Your suggestion should be appreciate.
Thanks in advance............
AND
My client want to see profitability at manufacturing plant level and need break up for the COGM. So how can i get the values of depot sales.
please let me know how to do........

Hai
Price control should be S for Depot also. You need to run standard cost estimate in DEPOT after entering additive cost under CK74N for frieght, excise duty etc. To transfer the standard cost from the source plant you need to make configuration in OMD9 defining the receiver and sender combination so that system can pick up the cost from source plant. This special produrement type needs to be asigned in the material masters of DEPOT under MRP 2 view.
Pushkala

PR for the material which is out of stock

Hi All,
can anybody tell me how e can create a PURCHASE REQUISITION for the material which is out of stock?

Hi,
Use ME51N to create purchase requistions. Also please read the SAP help documnetation before posting basing questions.
Regards
Sreekanth

How to seeting Delivery tolerance for the material

Similar Messages

Maybe you are looking for