How to send IDOC to DataWareHouse Systems

Can anyone tell me how to send an IDOC to Datawarehouse systems.

Hi,
please have a look at thread [How to send an IDoc from MII to SAP|http://forums.sdn.sap.com/click.jspa?searchID=60546363&messageID=8112660].
Does this help?
Michael

Similar Messages

How to send idocs across SAP systems in same network

Hello
I wander how to send idocs across SAP systems in same network

Hi Jan Bo,
please check the below link
http://help.sap.com/saphelp_nw04s/helpdata/en/dc/6b7f3c43d711d1893e0000e8323c4f/frameset.htm
please write if you want more detailes.
Regards,
S.Manu.

How to send IDocs from a non-SAP system to a SAP system

Hi everyone i am new to SAP R/3 System.
Currently i am required to send IDocs from a non-SAP system to a SAP R/3 System.
There is a guide on Cost-Effective and Quick Communication between SAP and 3rd Party Systems using IDOC HTTP XML Interface. But its from a SAP system to a non-SAP system and i am able to do that.
Is there any step by step guide where they teaches you how to send IDocs from a non-SAP system to SAP system via similar method?
Thank You!

Hi,
I hope this link may help you......
http://publib.boulder.ibm.com/infocenter/iisinfsv/v8r1/index.jsp?topic=/com.ibm.swg.im.iis.ds.entpak.sapr3.use.doc/topics/c_pack_r3_Introduction.html

Send IDoc from External System to SAP system

Hi Folks,
I have a requirement to send IDocs from an external system to the SAp system. Basically the external system is a subsystem which is able to send & receive idocs. The external system is currently able to send idocs to SAP system through the ALE layer but now we have to replace it by PI. Now the external system has to send teh IDocs to the SAP ECC system through the SAP PI 7.0.
Kindly let me knowq how I can achieve it.
Regards,
Santosh

Hi Satish,
You can achieve this requirement
1)If your external system going to support web service cals then send IDoc from External system as a web service, in PI use sender side SOAP and receiver side IDoc receiver channel to send IDoc.
or
2)Use proxy program ,implement the same ALE logic in PI.
or
3)Copy the Extenal IDoc message in to file folder as XML,then use file adapter to pick up this message and send it SAP using IDoc.
Regards,
raj

How to send photo to PI system using IDOC

Hi All,
We have uploaded employee photos in our HR system and we can see them in pa20.We would like to send them to PI system using IDOC.Please let me know how we can do that
Thanks
Bala Duvvuri

Hi,
there is no possibility of sending images in Idoc to any other system.
your requirement might be sending the photos of employee to some some other ssytem Via PI.
PI can pick the images from your R3 Via FTP and can route it to the target system.
Suresh

How to Send Idoc Acknowledgements back to Http sender (Http to Idoc)

Hi
I have scenario: Http To Idoc
first requirment:
i need to map xml file come from HTTP Sender to Idoc (SAP system), and need to send Idoc acknowledgements/status back to Http sender.
second requirment:
while mapping COM Xml file come from Http to COMMAT04 idoc into SAP system i need to to check whether corresponding material already exist in R/3 or not, if material is not exist, process should be cancelled and alert should be raised. ( i mean to say before sending COMMAT04 idoc into SAP, corresponding material should be exist already, if not alert should be send to http sender)
please thrown some inputs, if sombody has already done with htis....
Thanks in Advance, and help would be appreciated..
Thanks and Regards
Rajesh Babu

Just providing the specifics that Suhail has intended.
How to handle IDOC Acknowledgements in XI.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f6d2d790-0201-0010-9382-b50b499b3fbe
RFC Mapping Lookups:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a03e7b02-eea4-2910-089f-8214c6d1b439
Regards,
Ravi
Edited by: Ravi Kanth Talagana on Jul 7, 2008 3:32 PM

IDOC ORDERS05 - need to know how to send IDOC using EAN

Dear Expert,
in my site i have scenario to convert PO for 1 system to SO on other system.
Now my configuration is send IDOC using vendor material.
But I need to change for send with EAN code, and it can create my IDOC to SO (using EAN code)
How can i do?
Thank you for your answer,
@tom

Start here:
http://java.sun.com/docs/books/tutorial/getStarted/cupojava/
Also these:
Sun's basic Java tutorial
Sun's New To Java Center. Includes an overview of what Java is, instructions for setting up Java, an intro to programming (that includes links to the above tutorial or to parts of it), quizzes, a list of resources, and info on certification and courses.
http://javaalmanac.com. A couple dozen code examples that supplement The Java Developers Almanac.
jGuru. A general Java resource site. Includes FAQs, forums, courses, more.
JavaRanch. To quote the tagline on their homepage: "a friendly place for Java greenhorns." FAQs, forums (moderated, I believe), sample code, all kinds of goodies for newbies. From what I've heard, they live up to the "friendly" claim.
Bruce Eckel's Thinking in Java (Available online.)
Joshua Bloch's Effective Java
Bert Bates and Kathy Sierra's Head First Java.
James Gosling's The Java Programming Language. Gosling is
the creator of Java. It doesn't get much more authoratative than this.

How to send IDOC with extended message type MATMAS

Hi Experts,
I am looking for a solution to send open PR & open PO related data for diffrent materials through as IDCO in XML file.
Scenario is i have to show a report in a 3rd party system for open PR & open PR that too will come after selection some materials. That means select a materials & it will show all the open PO & related data in a report.
The rough idea for the solution i got is I can save the data in XML file in the system. For this i have to send IDOC. but the problem is there is no message type for PR. IF i am not wrong i can extend the MATMAS05 for a segment that will have PR related info.
Now what to do with that how to send the IDOC do i need to create another report to send IDOC or i can send the extended one through BD10. I tried it but it shows error message "0 communication idoc sent" so I dont no y such error is coming i think i am not filling the extended idoc. But again my QUestion is how to do that.
Can i use BAPI also for such work, if then how it can be helpful.
If anyone have any other solution Please help me out of this.
Regards,
Nik

Hi Mahesh,
Thanks for your reply.
My requirement is bit different. i have to send Open PR data for diffrent materials. In a 3rd party application user will search for few materials which will generate a report that will show the PR related data for those material.
That means for few selected materials there will be few PR's which may be open, i have to show those in my report.
Eg: material A, B. are in PR 00001 & material B, C in PR 00002.
After selecting materials A to C report will show
Material                 PR No                   Item No                Quantity
A                           00001                    10                             1
B                           00001                     20                            3
B                           00002                     10                            3
C                           00002                      10                           1
Same thing i have to do for open PO & open Sales order also.
Can u please help me to provide the solution how can i proceed for it. U have given the Message type & a bapi how it will help in my issue?
I got a suggesion from someone that extend message type matmas for PR, PO, SD related data & send the idoc. but i am confused how to pass that much data ina single IDOC.
Regards,
Nik

Questions concerning HowTo send IDoc to external system

Hi guys,
well i want to send and receive IDoc from an external system.
The other side of the communication now needs information from me what kind of parameters i can give to connect both systems. Also i need some informations concerning this.
I gonna use IDoc-Tunneling in XI. Because of sending data to the ext. System i need a RFC-Connection of TCP/IP?! But what kind of program do i have to start at other side (see Technical settings).
- Special to XI i have to configure a third party system in SLD. Do i need the system-parameters from the ext. System?
- in ID i have to configure PARTY!? Right?!
How to load external meta-data? is it possible via IDX2 by using the TCP/IP-RFC?
Perhaps somebody can give me a road map on which data i need from the ext. system and what i can give to the admin of the ext. System for sending IDoc to XI?!
br Jens

By IDoc-Tunneling i am thinking of just putting the IDoc through XI without transformation in XML (like in one blogs of Michal). Because of this blog there seems only to be one step in IR - import IDoc. in ID there are the mandatory steps.
But if i want the ext. Admin to tell what parameters i need to communicate with the ext. system i have doubts in telling him just the IP and perhaps a program which we have to start via RFC configured in XI.
regards

Missing IDOCS with status "qRFC used to send IDoc to SAP system"

We are running ECC6.0 (HR System) and are sending IDOCS to XI (PI7.0 SP10)for mapping before they end up in a 4.7 system.
We have implemented the Queue processing here: /people/community.user/blog/2006/11/04/how-to-serialize-idoc-xml-messages-fed-into-xi
We have two queues set up for different countries (Eurpoean roll out) and they have different Message Types for the same Logical System.
We have been getting serialitazion issues due to IDOCS not being sent, although they are showing in ECC6.0 as sent, they have not hit XI or subsequently the Target System.
On the whole, this has worked well for a while, but over the last week, something has effected the consistency of the correctly sent IDOCS. We had an update error with the Update Work Process, which left lots of short dumps, but this was fixed, but since then, we are getting these strange anomalies.
I appreciate this strange behaviour, but has anyone come across this before?
More an SAP than an XI issue, I think.... But as I appeciate your repsonses I added it here!

Hi Barry,
03 does not mean the idoc is delivered, it does only mean that it was sent to port.
The status that indicates that the idoc was delivered is 12 (idoc dispatched).
For getting this status a report named RBDMOIND has to be run/scheduled.
After this if the status becomes 12 the idoc is delivered otherwise if it is still 3 that means the idoc is still there.
Regards,
Sergio

How to send IDOC from nonSAP to SAP

Hi ;
I need to send IDOC from nonSAP to SAP. I have experience it with XI and BC..but now I need sending IDOC to SAP directl without these tools..
Can you explain it via sample? (I know already how to create port , define LP from we20,we21 ).
Firstly Do I need to create a RFC destination ? and I want to send IDOC as XML by HTML post method..Which port must I send?
Must this port point to this RFC?
Thanks.

Hi,
Here you have to generate an IDOC and convert into XML format and put at required server
third party will accept the IDOC XML not the IDOC.
Just check with ur third party in which format the data is accepted.
if its IDOC XML then u can use the file receiver adapter and place the IDOC XML file on 3rd party folder.
You use the IDoc adapter to have IDocs (intermediate documents) processed by the Integration Engine. IDocs from SAP systems Release 3.1x or higher are supported. You can also use the IDoc adapter to connect non-SAP systems to the Integration Engine.
The IDoc adapter converts the IDocs to IDoc XML format so that they can be processed by the Integration Server pipeline.
You can also transfer XML in IDoc format received from the Integration Server to connected systems. The Integration Server pipeline must convert the received XML to IDoc XML, and then transfer this IDoc XML to the IDoc adapter. The IDoc adapter converts the IDoc XML to native IDoc format and sends the IDoc to the identified receiver system using the standard IDoc interface.
Regards,
Shamma

Is it Possible to send IDOCs from one system to itself?

Hi,
Is it possible for the R/3 system to send IDocs to itself?? If yes can you guys guide me on how to configure the system to do the same.
The requirement is for learning purpose only.
Regards,
VJ

dear vijayendra,
you can do it by creating two clients on your system jus talk to any basis person for creation of clients after that you will make the configration on both client by just login through that.
after proper configration you can send the idoc.
first create the client after that u can talk to me in more details.
i have around 2 year hands on experiance in ale idoc.
by
vijay dwivedi
rewards if answer is helpfull for you.

Send IDOC from SAP system to IX but can't see any message in SXI_MONITOR

Hi all,
I have built up an XI system and configured an IDOC to IDOC scenario between two SAP Systems. After completed all configuration necessary:
1. Configuration on Source Side (SAP System that send IDOC) and on Target Side (SAP System that receive IDOC) is OK.
2. SLD is OK: Technical System and Business System are correct for these two SAP System.
3. Integration Repository: all designed Object is OK.
4. Integration Directory: all configuration is OK. "Test Configuration" Function is OK.
5. Runtime WorkBench: is OK. "Test Message" Function of "Integration Server" is OK.
In general, it is all OK.
But when i send an IDOC from SAP System Sour Side (Outbound IDOC from Source Side is OK), on the XI server i can't see any message in Tcode SXI_MONITOR. In this case, my XI server didn't receive any IDOC Message from this Source Side, and so that my XI server can't process and exchange any IDOC sent from Source Side.
Anyone can please help me to explain this problem: why my XI server can't receive any IDOC message from SAP System Source Side when all configuration is OK? Do anyone see the same case as this case?
Thanks a lot for all in advance,
Best regards,
Vinh vo

Hi,
Possible checks
At R/3 side
1) Check in SMQ1 and SM58
At XI Side
1) Check in SMQ2 and IDX5
Check this
http://help.sap.com/saphelp_nw04/helpdata/en/6a/e6194119d8f323e10000000a155106/frameset.htm
Regards
Seshagiri

Send idoc to other system via SOAP

Hi,
I intend to implement an interface with other system non SAP, to send idocs via SOAP.
I've read some documentation on sdn but i'm very confused about Was / XI / BSP and some others terms.
Please, can someone help me, driving me to the right way and where to start ?
I don't know either if this the best solution to send many idocs... I'm talking about 10000 idocs each time.
In advance, thanks.

Vitor,
I suppose u want to distribute data of Idocs to a system which accepts SOAP request. For the same u can use XI with necessary distribution model on R/3 side to post the IDoc to XI and XI SOAP receiver adapter making a call to necessary SOAP server to post the data.
Regards
Rajeev

How to send fax thru sap system

Hi all,
I need to send a fax thru sap system. In the given parameter I need to give email address & fax number. The result is the content I shud receive as both email & fax.
As far as email is concerned no problem. But I am not receiving the content fax. I am getting the following error as email. Pls find below the error message.
Your message did not reach some or all of the intended recipients.
      Subject:     000000002008
      Sent:     4/5/2007 11:47 AM
The following recipient(s) could not be reached:
      FAX3D2B918041396976@75 on 4/6/2007 2:31 AM
            The e-mail account does not exist at the organization this message was sent to. Check the e-mail address, or contact the recipient directly to find out the correct address.The MTS-ID of the original message is:ADR32000000006890
< sap.corp #5.1.1 SMTP; 553 <FAX=+918041396976@75>... only FQDN names will be accepted>
The fax number I typed is +918041396976 but the system itself is adding @75 behind it. I am not getting the fax message.
Can anyone help me in this regard.
Thanks in advance.
Vijay.

Hi Vijay,
The fax nio. parameter can be handled thru the program. I mean remove those extra characters... and try this code below for ref (its from sap-img.com)
The following program shows you how to send a fax from within ABAP/4. The report is delivered
in the standard system and is used in Transaction SCOM for the function "Send test fax".
Only the method via the call of SAPscript with DEVICE='TELEFAX', described below, ensures the
generation of a correct transmission request, independent of the R/3 release and of the used
fax server solution and its configuration.
The regular printing (for example, with NEW-PAGE PRINT ON...) on an output device created in
the spool administration of the device class 'Telefax' does generally not work!
REPORT RSKSENDF MESSAGE-ID SK.
Test report to send a test fax
sends a fax to the number <TO_CNTRY>-<TO_NMBER>
containing an automatically generated message text.
TABLES: USR03.
PARAMETERS: TO_CNTRY LIKE T005-LAND1 OBLIGATORY,
TO_NMBER LIKE TSP01-RQTELENUM OBLIGATORY,
FROM_USR(30) TYPE C DEFAULT SY-UNAME,
TO_RECIP(30) TYPE C DEFAULT SY-UNAME.
SAPscript content ITAB
DATA: BEGIN OF TEST_DOC OCCURS 10.
INCLUDE STRUCTURE TLINE.
DATA: END OF TEST_DOC.
SAPscript header struct
DATA BEGIN OF HEADER.
INCLUDE STRUCTURE THEAD.
DATA END OF HEADER.
INITIALIZATION.
get county from user addres in usr03
system->user profile->user address
check if not empty
SELECT SINGLE * FROM USR03 WHERE BNAME = SY-UNAME.
IF SY-SUBRC = 0 AND USR03-LAND1 <> SPACE.
TO_CNTRY = USR03-LAND1.
ENDIF.
START-OF-SELECTION.
PERFORM FILL_UP_TEST_DOC.
PERFORM SHOW_TEST_DOC.
AT PF08.
PERFORM SEND_FAX TABLES TEST_DOC USING TO_CNTRY
TO_NMBER.
AT SELECTION-SCREEN ON TO_NMBER.
PERFORM CHECK_NUMBER USING TO_CNTRY TO_NMBER.
*& Form CHECK_NUMBER
FORM CHECK_NUMBER USING
COUNTRY
NUMBER.
DATA: SERVICE LIKE TSKPA-SERVICE VALUE 'TELEFAX',
LEN LIKE SY-FDPOS.
FIELD-SYMBOLS <P>.
windows GUI push the ? from mandatory input instead
of overwriting it
LEN = STRLEN( TO_NMBER ).
IF LEN > 1.
SUBTRACT 1 FROM LEN.
ASSIGN TO_NMBER+LEN(1) TO <P>.
IF <P> = '?'.
<P> = SPACE.
ENDIF.
ENDIF.
official check FM
CALL FUNCTION 'TELECOMMUNICATION_NUMBER_CHECK'
EXPORTING
COUNTRY = COUNTRY
NUMBER = NUMBER
SERVICE = SERVICE.
on old 21?/22? release you may have to handle the
exception
because the Function uses RAISE instead of
MESSAGE... RAISING....
ENDFORM. " CHECK_NUMBER
*& Form FILL_UP_TEST_DOC
fills test text in itab TEST_DOC *
real life example needs to get real life data *
FORM FILL_UP_TEST_DOC.
DATA: DATUM(12) TYPE C,
UZEIT(10) TYPE C.
SAPscript initialization
of course, you may want to set a few parameter
(FORM,LAYOUT,....)
CALL FUNCTION 'INIT_TEXT'
EXPORTING
ID = 'ST '
LANGUAGE = SY-LANGU
NAME = 'FOO-BAR'
OBJECT = 'TEXT'
IMPORTING
HEADER = HEADER
TABLES
LINES = TEST_DOC
EXCEPTIONS
OTHERS = 1.
IF SY-SUBRC <> 0.
MESSAGE A400 WITH 'INIT_TEXT'.
ENDIF.
PERFORM ADD_EMPTY_LINE.
WRITE: SY-DATUM TO DATUM.
WRITE: SY-UZEIT TO UZEIT.
PERFORM ADD_LINES USING 'This is test Telefax'(001)
DATUM UZEIT.
PERFORM ADD_EMPTY_LINE.
PERFORM ADD_LINES USING 'From: &'(002) FROM_USR SPACE.
PERFORM ADD_LINES USING 'To: &'(003) TO_RECIP SPACE.
PERFORM ADD_LINES USING 'Fax number: & &'(004)
TO_CNTRY TO_NMBER.
PERFORM ADD_EMPTY_LINE.
PERFORM ADD_LINES USING
'This is a test fax send by Report RSKSENDF'(005)
SPACE SPACE.
PERFORM ADD_LINES USING 'on SAP system & '(006)
SY-SYSID SPACE.
PERFORM ADD_EMPTY_LINE.
PERFORM ADD_LINES USING
'the quick brown fox jumps over the lazy dog.'(101)
SPACE SAPCE.
PERFORM ADD_LINES USING
'THE QUICK BROWN FOX JUMPS OVER THE LAZY DOG.'(102)
SPACE SAPCE.
PERFORM ADD_EMPTY_LINE.
PERFORM ADD_LINES USING 'End of test'(007) SPACE
SPACE.
ENDFORM. " FILL_UP_TEST_DOC
*& Form ADD_LINES
printf a line an appends it in test_doc *
--> cformat format.
--> p1 param1
--> p2 param2
FORM ADD_LINES USING CFORMAT P1 P2.
TEST_DOC-TDFORMAT = '/'.
TEST_DOC-TDLINE = CFORMAT.
IF TEST_DOC-TDLINE CA '&'.
REPLACE '&' WITH P1 INTO TEST_DOC-TDLINE.
IF TEST_DOC-TDLINE CA '&'.
REPLACE '&' WITH P2 INTO TEST_DOC-TDLINE.
ENDIF.
ENDIF.
APPEND TEST_DOC.
ENDFORM. " ADD_LINES
*& Form ADD_EMPTY_LINE
appends an empty line to test_doc *
FORM ADD_EMPTY_LINE.
TEST_DOC-TDFORMAT = '/'.
CLEAR TEST_DOC-TDLINE.
APPEND TEST_DOC.
ENDFORM. " ADD_EMPTY_LINE
*& Form SHOW_TEST_DOC
lists the test doc for aproval *
*>>>> this is for fun only because PRINT_TEXT also
offers a preview *
FORM SHOW_TEST_DOC.
FORMAT COLOR COL_BACKGROUND INTENSIFIED OFF.
WRITE: / 'Test fax would look like this:'(020).
ULINE.
SKIP.
LOOP AT TEST_DOC.
IF TEST_DOC-TDLINE <> SPACE.
WRITE:/ TEST_DOC-TDLINE.
ELSE.
SKIP.
ENDIF.
ENDLOOP.
SKIP.
ULINE.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE: 'Press PF8 to send it'(021).
ENDFORM. " SHOW_TEST_DOC
*& Form SEND_FAX
send fax by calling SAPscript *
Note: Instead of using PRINT_TEXT you may also *
call OPEN_FORM / WRITE_FORM_LINES / CLOSE_FORM, *
this allows you to use a similar program structure *
as with NEW-PAGE PRINT ON / WRITE / NEW-PAGE PRINT
OFF *
FORM SEND_FAX
TABLES DOC2FAX STRUCTURE TEST_DOC
USING COUNTRY
NUMBER.
DATA: SID(5) TYPE N.
DATA BEGIN OF POPT.
INCLUDE STRUCTURE ITCPO.
DATA END OF POPT.
DATA BEGIN OF PRES.
INCLUDE STRUCTURE ITCPP.
DATA END OF PRES.
CLEAR POPT.
POPT-TDCOPIES = 1. " one copy
POPT-TDDEST = " done internaly by script,
POPT-TDPRINTER = " do not fill !!!
POPT-TDNEWID = 'X'. " do not reuse old spool request
POPT-TDDATASET = 'TEST'(022). " fill as you want
POPT-TDSUFFIX1 = 'FAX'(023). " fill as you want
POPT-TDSUFFIX2 = SY-UNAME. " fill as you want
POPT-TDIMMED = 'X'. " send now
POPT-TDLIFETIME = 8. " keep 8 days in spool
POPT-TDTELENUM = NUMBER. " number without country code
POPT-TDTELELAND = COUNTRY. " country of recipient
POPT-TDCOVER = 'test fax'(024).
POPT-TDCOVTITLE = 'test fax'(024).
POPT-TDIEXIT = 'X'.
CALL FUNCTION 'PRINT_TEXT'
EXPORTING
APPLICATION = 'TX'
ARCHIVE_INDEX = ' '
ARCHIVE_PARAMS = ' '
DEVICE = 'TELEFAX' "<<< here we say: fax it !
DIALOG = 'X'
HEADER = HEADER
OPTIONS = POPT
IMPORTING
RESULT = PRES
TABLES
LINES = DOC2FAX
EXCEPTIONS
OTHERS = 01.
do not bother with exception in sample code
CANCELED = 01
DEVICE = 02
FORM = 03
OPTIONS = 04
UNCLOSED = 05
UNKNOWN = 06
FORMAT = 07
TEXTFORMAT = 08
EXTERNAL = 09.
IF SY-SUBRC = 0.
arriving here means we could send:
SID = PRES-TDSPOOLID.
IF SID > '00000'.
MESSAGE S433 WITH SID.
ENDIF.
LEAVE .
ELSE.
do not bother with exception in sample code
MESSAGE A400 WITH 'PRIN_TEXT'.
ENDIF.
ENDFORM. " SEND_FAX

How to send IDOC to DataWareHouse Systems

Similar Messages

Maybe you are looking for