Send idoc to other system via SOAP

Hi,
I intend to implement an interface with other system non SAP, to send idocs via SOAP.
I've read some documentation on sdn but i'm very confused about Was / XI / BSP and some others terms.
Please, can someone help me, driving me to the right way and where to start ?
I don't know either if this the best solution to send many idocs... I'm talking about 10000 idocs each time.
In advance, thanks.

Vitor,
I suppose u want to distribute data of Idocs to a system which accepts SOAP request. For the same u can use XI with necessary distribution model on R/3 side to post the IDoc to XI and XI SOAP receiver adapter making a call to necessary SOAP server to post the data.
Regards
Rajeev

Similar Messages

Send Idoc to AS2 System via HTTP using XI

Hi,
We need to send Invoice Idocs as XML files from SAP R/3 system to external AS2 system using XI. The communication will happen over HTTP using certificate. I tried using Plain HTTP adapter , but the message went into error 'ATTRIBUTE_CLIENT'. Why this error ?
I came across some blogs saying about Seeburger AS2 adapter , but is this the only possible way ?
Kindly guide.
Thanks.
Tushar

Yes , AS2 adapter is the solution for it.
Refer all the below threads for AS2 information and configuration which need to do for B2B integration:
SEEBURGER EDI adapter
Re: Pls.. Help Needed.. Seeburger Mapping Names..!!
Re: Seeburger AS2 adapter...
Re: AS2 Module tab.. Mapping Names for modified Standard Msg types ? ? BIC ??
AS2 adpater-- Configuration details for both SND and RCV.
AS2 Sender Adapter -- Need few details.

Send IDoc from External System to SAP system

Hi Folks,
I have a requirement to send IDocs from an external system to the SAp system. Basically the external system is a subsystem which is able to send & receive idocs. The external system is currently able to send idocs to SAP system through the ALE layer but now we have to replace it by PI. Now the external system has to send teh IDocs to the SAP ECC system through the SAP PI 7.0.
Kindly let me knowq how I can achieve it.
Regards,
Santosh

Hi Satish,
You can achieve this requirement
1)If your external system going to support web service cals then send IDoc from External system as a web service, in PI use sender side SOAP and receiver side IDoc receiver channel to send IDoc.
or
2)Use proxy program ,implement the same ALE logic in PI.
or
3)Copy the Extenal IDoc message in to file folder as XML,then use file adapter to pick up this message and send it SAP using IDoc.
Regards,
raj

R/3(sends IDOC data) to IBMMQ via XI.

Hi,
My requirement is R/3(sends IDOC data) to IBMMQ via XI.
I need to sent up Integration Builder: design as well as configuration.
Can anyone send me a document which describes a complete end to end scenario?
I have seen the forum and the blogs but none decsribe the complete end-to-end scenario.
Plz reply at the earliest.
Regards,
Mateen.

My requirement is R/3(sends IDOC data) to IBMMQ via XI.
>>>
there is no document as sucj available on SDN that will help u implement the above scenario. But you can have help on
1. sending the IDoc to XI - Ref: https://wiki.sdn.sap.com/wiki/display/XI/SAPR3%28Idocs%29ToXI--Steps+Summarized
2. IBMMQ - you will have to use the JMS adapter. To receive help on configuring the receiver JMS adapter ref: http://help.sap.com/saphelp_nw04/helpdata/en/10/b1b4c8575a6e47954ad63438d303e4/content.htm

How to send idocs across SAP systems in same network

Hello
I wander how to send idocs across SAP systems in same network

Hi Jan Bo,
please check the below link
http://help.sap.com/saphelp_nw04s/helpdata/en/dc/6b7f3c43d711d1893e0000e8323c4f/frameset.htm
please write if you want more detailes.
Regards,
S.Manu.

Questions concerning HowTo send IDoc to external system

Hi guys,
well i want to send and receive IDoc from an external system.
The other side of the communication now needs information from me what kind of parameters i can give to connect both systems. Also i need some informations concerning this.
I gonna use IDoc-Tunneling in XI. Because of sending data to the ext. System i need a RFC-Connection of TCP/IP?! But what kind of program do i have to start at other side (see Technical settings).
- Special to XI i have to configure a third party system in SLD. Do i need the system-parameters from the ext. System?
- in ID i have to configure PARTY!? Right?!
How to load external meta-data? is it possible via IDX2 by using the TCP/IP-RFC?
Perhaps somebody can give me a road map on which data i need from the ext. system and what i can give to the admin of the ext. System for sending IDoc to XI?!
br Jens

By IDoc-Tunneling i am thinking of just putting the IDoc through XI without transformation in XML (like in one blogs of Michal). Because of this blog there seems only to be one step in IR - import IDoc. in ID there are the mandatory steps.
But if i want the ext. Admin to tell what parameters i need to communicate with the ext. system i have doubts in telling him just the IP and perhaps a program which we have to start via RFC configured in XI.
regards

Send IDOC from SAP system to IX but can't see any message in SXI_MONITOR

Hi all,
I have built up an XI system and configured an IDOC to IDOC scenario between two SAP Systems. After completed all configuration necessary:
1. Configuration on Source Side (SAP System that send IDOC) and on Target Side (SAP System that receive IDOC) is OK.
2. SLD is OK: Technical System and Business System are correct for these two SAP System.
3. Integration Repository: all designed Object is OK.
4. Integration Directory: all configuration is OK. "Test Configuration" Function is OK.
5. Runtime WorkBench: is OK. "Test Message" Function of "Integration Server" is OK.
In general, it is all OK.
But when i send an IDOC from SAP System Sour Side (Outbound IDOC from Source Side is OK), on the XI server i can't see any message in Tcode SXI_MONITOR. In this case, my XI server didn't receive any IDOC Message from this Source Side, and so that my XI server can't process and exchange any IDOC sent from Source Side.
Anyone can please help me to explain this problem: why my XI server can't receive any IDOC message from SAP System Source Side when all configuration is OK? Do anyone see the same case as this case?
Thanks a lot for all in advance,
Best regards,
Vinh vo

Hi,
Possible checks
At R/3 side
1) Check in SMQ1 and SM58
At XI Side
1) Check in SMQ2 and IDX5
Check this
http://help.sap.com/saphelp_nw04/helpdata/en/6a/e6194119d8f323e10000000a155106/frameset.htm
Regards
Seshagiri

QRFC/TRFC for sending idocs from SAP system to XI

Hi experts,
The standard program RFFOEDI1 generates payment orders - first PEXR2002 and then EUPEXR idocs. These idocs are to be sent to the bank from SAP through XI. Bank partner profile is maintained. But these idocs because of TRFC are not getting sent in the order in which they are generated by the SAP system. So I changed the bank partner profile settings from TRFC to QRFC and gave the rule name as first 16 of mes type. But the idocs are struck in the SAP system. Is there any standard program to be run to send the idocs out from SAP system or is it automatic.
Please suggest a standard method which is to be followed to send the idocs in the same order in which they are getting generated for the scenairo above.
Regards,
Asha

Hi Asha,
As you said Idocs are stucking,
To send Idocs to XI, you must have maintain some settings in XI to receive Idocs. Once they are done properly .in R3 side standard way to send idocs to XI is Maintaining Change Pointers and shedule the programe to trigger that most of Standard idocs will have standard programs to catch change pointers and send them to external system.
and to maintain the same order of idocs there is a setting called Quality Of Service in XI side ,that option should be set to Exactly Once In Order .
Regards,
Ramesh.

Missing IDOCS with status "qRFC used to send IDoc to SAP system"

We are running ECC6.0 (HR System) and are sending IDOCS to XI (PI7.0 SP10)for mapping before they end up in a 4.7 system.
We have implemented the Queue processing here: /people/community.user/blog/2006/11/04/how-to-serialize-idoc-xml-messages-fed-into-xi
We have two queues set up for different countries (Eurpoean roll out) and they have different Message Types for the same Logical System.
We have been getting serialitazion issues due to IDOCS not being sent, although they are showing in ECC6.0 as sent, they have not hit XI or subsequently the Target System.
On the whole, this has worked well for a while, but over the last week, something has effected the consistency of the correctly sent IDOCS. We had an update error with the Update Work Process, which left lots of short dumps, but this was fixed, but since then, we are getting these strange anomalies.
I appreciate this strange behaviour, but has anyone come across this before?
More an SAP than an XI issue, I think.... But as I appeciate your repsonses I added it here!

Hi Barry,
03 does not mean the idoc is delivered, it does only mean that it was sent to port.
The status that indicates that the idoc was delivered is 12 (idoc dispatched).
For getting this status a report named RBDMOIND has to be run/scheduled.
After this if the status becomes 12 the idoc is delivered otherwise if it is still 3 that means the idoc is still there.
Regards,
Sergio

How to send IDOC to DataWareHouse Systems

Can anyone tell me how to send an IDOC to Datawarehouse systems.

Hi,
please have a look at thread [How to send an IDoc from MII to SAP|http://forums.sdn.sap.com/click.jspa?searchID=60546363&messageID=8112660].
Does this help?
Michael

Is it Possible to send IDOCs from one system to itself?

Hi,
Is it possible for the R/3 system to send IDocs to itself?? If yes can you guys guide me on how to configure the system to do the same.
The requirement is for learning purpose only.
Regards,
VJ

dear vijayendra,
you can do it by creating two clients on your system jus talk to any basis person for creation of clients after that you will make the configration on both client by just login through that.
after proper configration you can send the idoc.
first create the client after that u can talk to me in more details.
i have around 2 year hands on experiance in ale idoc.
by
vijay dwivedi
rewards if answer is helpfull for you.

How can local user send message to other user via OSX server in mac maverick

I just install OS X server in mac mavericks and enable services such as message, DNS, VPN, etc. I also create local users and local network users. I add some local users from OSX server to Message app in order to message to server, but I cannot send any message to those user, even Bonjour is available but I cannot use it to send message in local network.
I already followed all Server Help in Messages like in this image:
I try to access to my local OS X server via IP address by using other PC, Mac and iPhone and I can get this interface:
I already try in iPhone to send message to local user in OS X server after accessing to OS X server via IP Address, but I don't know how local user can get that message and I see nothing in message_archives of message data of server. Therefore, how each user in OSX server can message to each other across OSX server ? Does Admin have to write some codes or make configuration for providing message services to those users ?
Message was edited by: chhanmalin

Client users need to use XMPP client app to log in to server with account name like in server , then user can send message to other users in server. Client users can use iphone, pc, or mac.

Sending IDoc to Logical System

Hi All,
Foremost thing before i post my query is that am an ABAP Developer.
Now the Query is, we have scenario where in we need to send the Sales order/Delivery when it is created to a logical system( an external sytem ). I have created a new message condition type which has the transmission medium as 6 ( EDI ) and the partner to be of type LS (Logical Sytem). I have also defined the partner profile of the logical system with this message condition type. But the problem is when am issuing an output am not able to see my logical system as on of the options as a partner, the options what i have are the Ship to Party, Sold to Party and so on from the sales document.
I need to know how can issue and idoc to a logical system instead of a ship to party or a sold to party. Is there anything that am missing while creating the message condition type ?
Regards,
Chaitanya.

Hi,
Have a look at this, it may help
http://help.sap.com/saphelp_47x200/helpdata/en/2d/b12d3b1daca008e10000000a114084/frameset.htm
http://help.sap.com/saphelp_47x200/helpdata/en/4c/df7e98f0dd11d2b74b0000e8160175/frameset.htm
http://help.sap.com/saphelp_47x200/helpdata/en/dc/6b7cac43d711d1893e0000e8323c4f/frameset.htm
If you just want to send delivery information use output type LAVA. This will need including in the shipping output determination.

Sending IDoc from external system to XI system

Hi All,
I want to send an IDoc from a subsytem (External System) to the SAP PI system. how to achieve the same ?
Regards,
Santosh

hi,
>>>Do you mean to say the port I am creating for the external system should actually refer to a SAP system
not the port - port's name should be a new one but the RFC should point to an SAP system
>>>and the IDoc you want to transmit should be imported to that port using the tcode IDX2.
this will be transported then from SAP application system
>>>>In fact I have already done the same step but its still not working the IDoc is not reaching the XI system.
then you should see the error in your sending tool - I worked with JCO IDOC client and the error was always
very explanatory (like BS in SLD missing etc.) so it was pretty easy to debug
Regards,
Michal Krawczyk

Sending email from other location via WiFi

Hi there. My Ipad is working fine. At home with the wireless no problems at all. But outside when I use another WiFi (work, hotel etc) I have a problem sending emails. Receiving no problem but when I send one it keeps on trying to send it but to no avail. How do I fix this? Adrian

"Receiving no problem but when I send one it keeps on trying to send it but to no avail. How do I fix this?"
The fix I recommend to my friends is to subscribe to
http://www.authsmtp.com/
It costs a few pounds a year and works anywhere in the world (in my experience). Saves a lot of time for a traveller.
Good UK based support as well.
Tony

Send idoc to other system via SOAP

Similar Messages

Maybe you are looking for