How to shorten the sending email waiting time?
I'm using javamail to send email to all customers of my web site. But if there are some invalid addresses, I have to wait for very long time. I suspect the smtp server will retry to send the mail many times but I don't want this, how to set it to make it only try once?
Or when I can find all the properties I can set about the mail server?
Thank you very much!
Or when I can find all the properties I can set about
the mail server?All mail servers are different, but they should come with documentation about how to configure them. However, trying once is not a good idea. Mail servers are not perfect, and it is quite possible that the server you are sending to can be down for several hours.
Similar Messages
-
I can't sent an email to a large group of people. The sending email surface on every time I turn on my computer MAC PRO. How can I delete it? Why it happens? How to prevent it to happen again? Thank you. Danielson (Danicolenira)
What do yo mean by " The sending email surface on every time"?
-
How to shorten the running time of NXT brick (TETRIX & MATRIX toolkit)
Hi
How to shorten the running time of NXT brick ?
(TETRIX & MATRIX toolkit running time)
Software is LabVIEW 2012 for LEGO MINDSTORMS
Thanks.
Solved!
Go to Solution.
Attachments:
TETRIX_Toolkit_running_time.vi 20 KB
MATRIX_Toolkit_running_time.vi 13 KBHi 40123157,
You are using the module in an appropriate way, and there is no easy way to improve the loop iteration time beyond what you have done. Here are my suggestions:
1) i2c commands do take a long time. In your application, it may speed up if you only execute Move Motors only when the motor speed has changed.
2) For this particular example, you are not using the output of Motor Status. If this VI doesn't need to execute it may be removed.
3) If you must speed up execution beyond this, as an advanced user of LabVIEW, you can create a copy of the Move Motors VI and modify it as you choose. All you have to do for the 'DC Motors' input is use cluster to array on the cluster, as shown below. I think you can speed it up by executing all setup before the loop (set connection type and setup sensor), and removing calculate power value if you're only sending values between -100 and 100.
4) Drawing to the screen may be slowing you down here. -
How to prevent send email more time
Hi guys if i have two vaiable and i make comparison as following
timer_tick event every i hours
if (a==b)
send email
but i need if a==b send email one time and if send email already not send again and again
not every time see a==b send email more time
only one time if condition happen
How i do thatYou need to set one of a or b to false (if we talking about boolean variables here) after sending the email, and then you have to set back to true when you want to send another email, below is an explanation:
if(//new sendmail){
b=a;
if (a==b)
//send email
b=false;
Fouad Roumieh -
TS3276 how do I get Mail to stop downloading the same email multiple times?
My mail keeps downloading the same email multiple times. I've had as many as 10 of the same emial. How do I stop this?
Me too - did you ever figure it out?
You can't even delete from the server in mountain lion.... I did it from my old mac, but it didn't work. I keep having 11,000 new emails that can not even be deleted in blocks!!!
Was it a gmail account? Mine is, and my other 2 are fine... -
How to change the sender's email (class cl_sapuser_bcs) ?!?
Hi Friends,
Currently, I use class CL_BCS to sending an email. I've set sender as below :
data: sender type ref to cl_sapuser_bcs.
sender = cl_sapuser_bcs=>create( sy-uname ).
call method send_request->set_sender
exporting
i_sender = sender.
But I don't know how to change the sender's email to a specific email address, i.e: [email protected]
Anyone can tell me how?
Thanks,
GyDATA: recipient TYPE REF TO if_recipient_bcs.
sender = cl_sapuser_bcs=>create( sy-uname ).
CALL METHOD send_request->set_sender
EXPORTING i_sender = sender.
--------- add recipient (e-mail address) -----------------------
create recipient - please replace e-mail address !!!
<b> recipient = cl_cam_address_bcs=>create_internet_address(
'[email protected]').</b>
add recipient with its respective attributes to send request
CALL METHOD send_request->add_recipient
EXPORTING
i_recipient = recipient
i_express = 'X'.
Message was edited by:
Hymavathi Oruganti -
It's currently taking me ages to send multiple emails as I'm having to copy and paste the email each time. Does anyone know if there is a way that I can send the same email several times but that can be addressed (Dear....) to different people?
Oh at least just duplicate the same email several times so all I will be maunally inserting each time will be the address/name??? Please help!!!
-
My email won't send as when it was set up an extra letter was accidentally inserted in the address. I need to know how to remove the entire email address and start a fresh.
Launch Mail.app, select Mail > Preferences... > Accounts and select the account you need to edit in the left column.
The receiving information will be displayed for the selected Account, with a pop-up selector for the Outgoing Mail Server (SMTP) toward the bottom. That selector shows which mail server will be used with this account; to send mail.
Click and hold on that selector, and scroll down (holding the mouse or trackpad clicked) to Edit Mail Server List... and you'll get a sheet dropping down with the mail servers listed.
Select the problematic mail server, and edit it using the Account Information and Advanced items on that sheet. -
My imac has recovered the same email 55 times. It won't stop. I've turned it off and on, but that doesn't help. It spends all it's time recovering the email, but it doesn't load any of my fresh ones. What do I do?
Hello,
>Are all those passwords with their matching URLs stored somewhere on my Mac?
Yes, that IS the Keychain.
Mac OS X 10.4: Keychain Access asks for keychain "login" after changing login password...
http://support.apple.com/kb/HT1631
Resetting your keychain in Mac OS X...
If Keychain First Aid finds an issue that it cannot repair, or if you do not know your keychain password, you may need to reset your keychain.
http://support.apple.com/kb/TS1544
And finally...
Keychain is no longer able to update itself when I upgrade an application...
http://unsanity.org/archives/2007_01.php
>Makes me kind of uneasy, 'encrypted' or not. I'm always skeptical of the "trust me..." approach to computer security.
But if it didn't you be bothered to put in hundrefds of usernames & Passwords a day most likely. -
Send Email Notification - Time Based Workflow
Hi,
I have a requirement similar to the ones posted on this thread Re: Send notification on pre-defined date
but have couple of questions on the logic. Can anyone please suggest a solution for this requirement
The requirement is to send an email notification to an owner if the Opportunity remains with sales Stage = "Inquiry" for more than 90 days.
Here's what I tried
Work Flow Name - Opp Closure - New
Trigger Event - When New Record Saved
Rule Condition : Sales stage = "Inquiry" and modified date = Created date
Action
Wait -
Period - 90 days
Send Email
Wait 7 days
Updates Slaes Stage from " Inquiry" to "Closed/Lost"
The above workflow will take care of New opportunties that are created and never modified
I am having issues figuring out the logic for modified record
Work flow Name - Opp Closure - Mod1
Trigger Event - When Modified Record Saved
Rule condition : sales Stage = "Inquiry" and <IndexedBoolean> IS NULL or <IndexedBoolean> = "N"
Action
Wait - 90 days
Workflow Name - Opp Closure - Mod2
Trigger Event - When Modified Record Saved
Rule Condition : Sales stage = "Inquiry" and <IndexedBoolean> IS NULL or <IndexedBoolean> = "N" and (today()-<LastUpdate>) > 89
Action
Wait - 0 days
Send Email
Wait 7 days
Updates Slaes Stage from " Inquiry" to "Closed/Lost"
Update IndexedBoolean = 'Y'
But here I am confused about a scenario where after waiting for 90 days when it exceutes Opp Closure - Mod2 and if its been 20 days since the record was last modified, the condition fails and actions do not get executed which is fine but what if the record is never modified after that period and remains in Inquiry status , how will I capture that scenario and execute the workflow actions. Please advise
Regards,
SKJHello SKJ
Your requirement is to send an email notification to an owner if the Opportunity remains with sales Stage = "Inquiry" for more than 90 days.
New Record Saved.
This means even the opportunity can be modified but the sales stage should not change. For e.g. when i create a new record, I can have the sales stage as "Inquiry" and save. At a later date I can modify the description of the opportunity (this would change the modified date), but the sales stage remains at Inquiry. Thus the notification should go 90 days after the sales stage has been set and not since last modified date. Keeping this in mind the condition the rule condition "Rule Condition : Sales stage = "Inquiry" and modified date = Created date" needs to be modified as Sales stage = "Inquiry".
Coming to Modified Condition:
Trigger Event - When Modified Record Saved
Rule Condition : (PRE('<SalesStage>')<>[<SalesStage>] AND [<SalesStage>]="Inquiry") OR ([<SalesStage>]="Inquiry")
Wait 90 Days
Revaluate Conditon = 'Y'
Action Send Email Notification
Explanation
When you set the sales Stage as "Inquiry", the condition (PRE('<SalesStage>')<>[<SalesStage>] AND [<SalesStage>]="Inquiry") would be satissfied and then the workflow would trigger. After 90 days if the sales stage is still in "Inquiry", the second part of the condition "[<SalesStage>]="Inquiry" would be satisfied and the email notification would be sent. If the sales stage has been changed to other sales stage, then the condition would fail and the notification would not be sent.
Regards,
Paul Swarnapandian -
Setting the 'Return-Path' of emails sent using the send email behaviour
Hi,
How do I set the 'Return-Path' of emails sent using the send email behaviour? I am having troubles because the emails sent from my page are being filtered out as spam when they should be coming through. the text is the following (it is the notification of an e-card to the recipient):
Dear Bart
We've decided this year to share our holiday greetings while also showing our commitment to protect the planet. Since it takes 24 mature trees to
produce one ton of greeting cards, this e-card shares our holiday wishes with both you and future generations.
Please follow the link below.
Best Wishes,
John
http://www.jdgcsfiles.com/_ecards/viewcard.php?ID_cnt=297
I suspect that it has something to do with the return path setting.
Can anyone help me on this one and get it through the spam filters of most email clients?!
Thanks,
NIkHi Nik,
so far the only "flagged as spam" reason I know of is, that ADDT curreently misses to insert the current date/time -- please try the fix mentioned in the thread http://www.adobeforums.com/webx/.3c034953/5 and see if it helps
Cheers,
Günter Schenk
Adobe Community Expert, Dreamweaver -
How to delete the duplicate email address in BP master data
Hi,
When you get an email ids from the third party vendor and you are loading into CRM BP master data. how to delete the duplicate email address already exits in the system. In CRM you can create the same BP with different id. I would like to know how to delete the email address during importing email addresses from the third party tool.
During the campaign you are sending email to all your customers, when the customer want to unsubscibe the email address from your list, how to unsubcribe the email address and how to updat the BP master data.
If you are sending the email to customer, you are using html or simple text, if the customer wants only html or simple text, how you to specify in the system?
thanks,
arulHello Arul,
welcome to the SDN CRM Development forum.
1. I think you should clear the data with duplicate E-Mail adresses in the external tool.
2. Unsubscription could be done by a Marketing Attribute which could be set by using a Target Group which is created by Campaign Automation. Have a look at this Toppic. There is also a Best Practice avaliable at http://help.sap.com/bp_crmv340/CRM_DE/index.htm.
3. Also HTML or Simple text can be mained in a Marketing Attribute. You have to use different Mail Forms to which are sent to different Target groups.
Regards
Gregor -
How to use the same email address for outgoing email on two iPads?
How to use the same email address for outgoing email on two iPads?. My wife and I both use the same email address. We receive the same incoming email on both iPads but are unable to send email from my wife's iPad. She is using an iPad 2 and is usng IOS 6.0.1
Hi Creaturekeeper,
If you've added the account into the iPad and you are unable to send email from it, then please follow the troubleshooting in the article below.
Get help with Mail on iPhone, iPad, and iPod touch - Apple Support
Take care,
Alex H. -
How to put the sender name in the wf-system
Hi,
Can anybody pls tell me how to give the sender address in stead of WF-SYSTEM
When ever a mail is triggered the mail is send to the mail inbox.in the mail inbox it is showing in the sender option : WF-SYSTEM...
I want to put any name their .
can i put any name their.
please help me.....very urgent.
For any clarification pls revert back.
ThnksHi,
I've put the steps again here but this time I've put in Bold the lines that needs to be added in the different sources.
Copy the BO SOFM to ZSOFM
And add to the method Send an import parameter
SENDER like PA0105-USRID_LONG
Then change the method SEND
begin_method send changing container.
data: result_object type swc_object.
data: document_data like sodocchgi1,
document_type like sofolenti1-obj_type,
receivers like somlreci1 occurs 1 with header line,
object_para like soparai1 occurs 0 with header line,
object_parb like soparbi1 occurs 0 with header line,
object_header like solisti1 occurs 1 with header line,
object_content like solisti1 occurs 10 with header line.
data folder_id like soobjinfi1-object_id.
data new_object_id like soobjinfi1-object_id.
data document_id like sofolenti1-doc_id.
data low_len like sy-tabix.
data rcode like sonv-rcode.
<b>data : SENDER like pa0105-usrid_long.
DATA : packinglist LIKE sopcklsti1 OCCURS 0 WITH HEADER LINE.
DATA: tab_lines TYPE sy-tabix.
DATA : sender_address like SOEXTRECI1-RECEIVER.
swc_get_element container 'SENDER' SENDER. </b>
* get receivers out of container
perform extract_receivers tables receivers
container.
if object-key = space.
* get document data out of the container
perform extract_document tables object_para
object_parb
object_header
object_content
container
using document_type
document_data.
<b>DESCRIBE TABLE object_content LINES tab_lines.
Packing List
CLEAR packinglist-transf_bin.
packinglist-head_start = 1.
packinglist-head_num = 0.
packinglist-body_start = 1.
packinglist-body_num = tab_lines.
packinglist-doc_type = 'RAW'.
APPEND packinglist.
move sender to sender_address.
* send document
call function 'SO_DOCUMENT_SEND_API1'
exporting
put_in_outbox = ''
document_data = document_data
sender_address = sender_address
sender_address_type = 'SMTP'
commit_work = ''
tables
packing_list = packinglist
receivers = receivers
contents_txt = object_content </b> exceptions
parameter_error = 23
too_many_receivers = 1
x_error = 1000
operation_no_authorization = 13
enqueue_error = 2
document_type_not_exist = 3
document_not_sent = 15.
if sy-subrc ne 0.
exit_return 1023 document_data-obj_descr space space space.
endif.
* create now SOFM object of sent document
if sy-subrc = 0.
perform insert_document_with_data using new_object_id "870566
document_data
changing folder_id
rcode.
else.
move sy-subrc to rcode.
exit_return 1900 'Document Insert' space space space. "#EC NOTEXT
endif.
* create result element with object key
if rcode = 0.
perform create_result tables container
using folder_id
new_object_id
result_object.
perform create_object using folder_id
new_object_id.
endif.
else.
move object-key to document_id.
call function 'SO_OLD_DOCUMENT_SEND_API1'
exporting
document_id = document_id
PUT_IN_OUTBOX =
IMPORTING
SENT_TO_ALL =
tables
receivers = receivers
exceptions
too_many_receiver = 1
document_not_sent = 2
document_not_exist = 14
operation_no_authorization = 13
parameter_error = 23
x_error = 6
enqueue_error = 7
others = 1000.
if sy-subrc ne 0.
exit_return 1023 document_id space space space.
endif.
endif.
end_method.
Copy the function SWW_SRV_MAIL_SEND to ZSWW_SRV_MAIL_SEND
And add as import parameter SENDER TYPE COMM_ID_LONG.
In this function it will create an object SOFM and call the method Send and link the container for this method. So now well create our copy of SOFM and add SENDER as container.
Set the object.
swc_create_object office_object 'ZSOFM' space.
swc_set_element local_container 'DocumentName' documentname.
swc_set_element local_container 'DocumentTitle' documenttitle.
swc_set_element local_container 'SENDER' SENDER.
swc_set_table local_container 'DocumentContent' documentcontent[].
swc_set_table local_container 'Receivers' t_receivers.
swc_set_element local_container 'Express' express.
IF NOT documentexpirydate IS INITIAL.
swc_set_element local_container 'DocumentExpiryDat'
documentexpirydate.
ENDIF.
Create a subtype for BO SELFITEM
Example : ZSELFWI
Create a method SendWithSender
Tab General : Check Synchronous & Result parameter
Tab Result type : Object type SOFM
Tab ABAP : SWO_INVOKE
Then youll have to copy all the parameter from the original function
SendTaskDescription and add a new one
SENDER(import like PA0105-USRID_LONG)
Then copy the method SendTaskDescription to the code of SendWithSender
Now youll have to do some modifications to call the copy of the function
SWW_SRV_MAIL_SEND and then delegate ZSELFWI  SELFITEM
And now in your task call the method SendWithSender of Selfitem and bind an address to Sender.
BEGIN_METHOD SENDWITHSENDER CHANGING CONTAINER.
<b>DATA: WORKITEMID LIKE SWWWIHEAD-WI_ID. </b>
DATA: receivers TYPE swc_object OCCURS 0.
DATA: BEGIN OF address_objects OCCURS 3,
a_object TYPE swc_object,
END OF address_objects.
DATA: return TYPE STANDARD TABLE OF swotreturn WITH HEADER LINE.
DATA: text_lines TYPE STANDARD TABLE OF tline WITH HEADER LINE.
DATA: document_content TYPE so_txttab.
DATA: ls_document_content TYPE LINE OF so_txttab.
DATA: workitem_task LIKE swwwihead-wi_rh_task,
workitem_language LIKE swwwihead-wi_lang,
workitem_short_text LIKE swwwihead-wi_text,
express LIKE sos04-l_***,
send_type LIKE sos04-l_art,
send_language LIKE sy-langu,
rc LIKE syst-subrc.
<b>DATA: SENDER like PA0105-USRID_LONG. </b>
DATA: BEGIN OF address_strings OCCURS 3,
a_string LIKE soxna-fullname,
END OF address_strings.
DATA: attachments TYPE swc_object OCCURS 0 WITH HEADER LINE.
DATA: line_width LIKE thead-tdlinesize.
DATA: wi_handle TYPE REF TO if_swf_run_wim_internal.
DATA: wi_container TYPE REF TO if_swf_cnt_container.
DATA: lv_excp TYPE REF TO cx_swf_run_wim.
DATA: l_subrc TYPE sysubrc.
DATA: l_expiry_date TYPE sydatum.
DATA: l_settings TYPE swp_admin.
~~ begin of trace specific coding ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
PERFORM trc_init <b>in program SWWSI</b> .
~~ end of trace specific coding ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
swc_container addr_crea_container.
Get the input parameters.
swc_get_table container 'AddressStrings' address_strings.
swc_get_element container 'TypeId' send_type.
swc_get_table container 'Receivers' receivers.
swc_get_element container 'Express' express.
swc_get_element container 'Language' send_language.
swc_get_table container 'Attachments' attachments.
swc_get_element container 'LineWidth' line_width.
<b>SWC_GET_ELEMENT CONTAINER 'SENDER' SENDER.
SWC_GET_PROPERTY SELF 'WorkitemId' WORKITEMID. </b> ~~ begin of trace specific coding ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
PERFORM trc_after_import_params <b>in program SWWSI</b>
TABLES container
address_strings
receivers
attachments
USING send_type
express
send_language
line_width.
~~ end of trace specific coding ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Get some attributes of the object.
TRY.
CALL METHOD cl_swf_run_wim_factory=>find_by_wiid
EXPORTING
im_wiid = <b>WorkitemId</b>
RECEIVING
re_instance = wi_handle.
workitem_task = wi_handle->m_sww_wihead-wi_rh_task.
IF send_language IS INITIAL.
send_language = wi_handle->m_sww_wihead-wi_lang.
ENDIF.
wi_container = wi_handle->get_wi_container( ).
Perform variable substitution for task description.
CLEAR text_lines[].
IF line_width IS INITIAL.
line_width = 75.
line_width = 132.
ENDIF.
CALL FUNCTION 'SWU_GET_TASK_TEXTLINES'
EXPORTING
task = workitem_task
usage = 'W'
linewidth = line_width
language = send_language
container_handle = wi_container
TABLES
ascii_text_lines = text_lines
EXCEPTIONS
wrong_usage = 01
text_not_found = 02
text_system_error = 03.
IF sy-subrc NE 0.
exit_return 1004 space space space space.
ENDIF.
get work item text
CALL METHOD wi_handle->get_witext
EXPORTING
im_language = send_language
RECEIVING
re_witext = workitem_short_text.
~~ begin of trace specific coding ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
PERFORM trc_after_text_generation <b>in program SWWSI</b>
TABLES
text_lines
USING
wi_handle->m_sww_wihead
workitem_short_text
send_language
line_width.
~~ end of trace specific coding ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fill the document content.
LOOP AT text_lines.
ls_document_content-line = text_lines-tdline. "note 510198
APPEND ls_document_content TO document_content.
ENDLOOP.
* note 881594 - determine default expiry date for office documents
CALL FUNCTION 'SWP_ADMIN_DATA_READ'
IMPORTING
wf_settings = l_settings.
IF NOT l_settings-doc_expiry IS INITIAL.
l_expiry_date = sy-datum + l_settings-doc_expiry.
ENDIF.
*- There problems with the implementation of persistence service
*- of objects. The symptom of this problems is that sendorders
*- (SCOT) are not saved if an object pool exists. Therefore we
*- create a new session in this environments.
DATA: t_receivers_por TYPE tswotobjid.
DATA: t_attachments_por TYPE tswotobjid.
DATA: receiver_object TYPE swc_object.
DATA: attachment_object TYPE swc_object.
DATA: por TYPE swotobjid.
DATA: result_por TYPE swotobjid.
DATA: rfcdest TYPE rfcdest.
DATA: documentname TYPE sodocchgi1-obj_name.
DATA: documenttitle TYPE sodocchgi1-obj_descr.
DATA: t_address_strings type swfstrtab.
LOOP AT receivers INTO receiver_object.
swc_object_to_persistent receiver_object por.
IF sy-subrc EQ 0.
swc_free_object receiver_object.
APPEND por TO t_receivers_por.
ENDIF.
ENDLOOP.
LOOP AT attachments INTO attachment_object.
swc_object_to_persistent attachment_object por.
IF sy-subrc EQ 0.
swc_free_object attachment_object.
APPEND por TO t_attachments_por.
ENDIF.
ENDLOOP.
LOOP AT address_strings.
append address_strings to t_address_strings.
endloop.
rfcdest = space.
IF cl_object_pool=>instance_exists( ) EQ 'X'.
rfcdest = 'NONE'.
ENDIF.
documentname = 'Notiz'(001).
documenttitle = workitem_short_text.
CALL FUNCTION <b>'ZSWW_SRV_MAIL_SEND' </b>
DESTINATION rfcdest
EXPORTING
send_type = send_type
send_language = send_language
documentname = documentname
documenttitle = documenttitle
documentcontent = document_content
receivers = t_receivers_por
express = express
documentexpirydate = l_expiry_date
attachments = t_attachments_por
address_strings = t_address_strings
<b>SENDER = SENDER </b>
IMPORTING
result_por = result_por
EXCEPTIONS
document_not_send = 1
not_specified = 2
error_during_send = 3
error_during_attachment = 4
OTHERS = 2.
l_subrc = sy-subrc.
*~~ begin of trace specific coding ~~~~~~~~~~~~~~~~~~~~~
PERFORM trc_after_send <b>in program SWWSI</b> USING l_subrc.
*~~ end of trace specific coding ~~~~~~~~~~~~~~~~~~~~~~~
Check the result of the method call.
CASE l_subrc.
WHEN 0.
Set the return element (the SOFM object).
swc_set_element container result result_por.
commit work.
WHEN 1.
exit_return 1001 sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
WHEN 2.
exit_return 1002 sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
WHEN 4.
exit_return 1005 sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
WHEN OTHERS.
exit_return 1003 space space space space.
ENDCASE.
CATCH cx_swf_run_wim INTO lv_excp .
exit_return 1006 <b>workitemid</b> space space space.
ENDTRY.
END_METHOD. -
How to change the Rescue email?
How to change the rescue email?
If you know the answers to your security questions, then from http://support.apple.com/kb/HT5312 :
Navigate to appleid.apple.com using your web browser.
Click "Manage your account"
When prompted, sign in using your Apple ID and password.
Click Password & Security
You'll be asked to answer 2 of your 3 security questions before you can make any modifications. If you are unable to remember your answers, you can choose to send an email to your rescue email to reset your security questions.
After you've validated your identity by correctly answering your security questions, click Edit to the right of your rescue email address.
Once you've finished editing your rescue email address, click the Save button directly below the email field.
If you can't remember their answers and you have access to your current rescue email address then steps 1 to 5 should let you send reset info to it.
If you don't have access to your current rescue email address then you will need to contact iTunes Support / Apple to get the questions reset.Contacting Apple about account security :
http://support.apple.com/kb/HT5699
When they've been reset you can then use the aboe steps to change your rescue email address for potential future use.
Maybe you are looking for
-
Applet knowing where it runs: on host or on client
Hi, everybody! My question might sound stupid but I could not find the answer elsewhere. I want to set boolean in init() that tells my applet where it runs: on host machine or on client machine. Is there method to determine it? I am writing clock pro
-
I am wanting to make a panorama. Should I first Edit my RAW files in Lightroom 4 then Merge in Photoshop 6, or Merge in Photoshop 6 and then Edit in Lightroom 4? I can easily edit the RAW files first and then go back and redo them if I have to in Lig
-
BOMM 3.0: ClassCastExeption
Hi, We have installed BOMM 3.0 and BOE 3.0 (FP1) on a windowsserver 2003 64bit, and with an Oracle 10.2.0.1 32 bit client software. Our repos (AUDIT,BOMM,CMS) are placed in an Oracle 10.2.0.2 64 bit database (on different schemas) on a Solaris server
-
Hello, I have a copy of PS Elements 10, but recently purchased a new computer, which doesn't have a CD/DVD drive. How can I download PSE10 onto this computer without using the discs? Thanks
-
Change the number of history entries on the Back Button
Firefox allows 15 history entries when holding the Back (or Previous) button. If I want to go to the #31 entry in the history, I have to press and hold Back many times to reach it. I want to change that number for more entries like 50. Is it possible