How to start gnome on a remote system
Hi,
How can I start gnome on a reomte system using Kea X or Cygwin ?
-bash-3.00$ DISPLAY=10.10.10.10:0.0
-bash-3.00$ export DISPLAY
And after ?!?
-bash-3.00$ gnome-session &
Thanks for your help
Hi,
First login with user orasid and fire command "lsnrctl start"
it start the listner.
Then login with user sidadm and fire command "startsap"
it will start the database first then start the SAP.
Edited by: Alpesh Patel on Aug 12, 2008 12:07 PM
Similar Messages
-
How to Start and Stop the SAP System
Hi,
I have installed "Sneak Preview"; Searched for start and stop scripts but there are more than one script which has named start.bat and stop.bat. Moreover, I searched the documents which comes with Sneak Preview but could find useful instruction there either.
Question: Could you please point me to the documentation where it explains the starting and stopping SAP, for Sneak Preview?
Thanks in advance
Jawad KakarPlease help me by showing action plan for stop sap , offline backup and then start sap.
i am little bit confuse How to start and stop SAP on cluster for offline backup
Below are the systems name with host name , please explain me in sequence
Systems name Hostname
# Hope SAP ERP Prod DB Primary gsgbbux860
# Hope SAP ERP Prod DB Standby gsgbbux861
# Hope SAP ERP Prod Cluster gsgbbux862
# Hope SAP ERP App 1 gsgbbux864
# Hope SAP ERP App 2 gsgbbux865
Thanks in advance
Zaheer -
How to config DAQmx device on remote system
How can I set the DAQmx device on the remote system? I have NI-7831R on a desktop, but when I open MAX on my lap top which is connected to the desktop I can't see the device? Should I do something to configure the device?
The 7831R is not a DAQmx device, so it should not show up under your DAQmx devices. It should show up in MAX on the computer it is installed in as as a RIO device. However this will only show up if you have NI-RIO driver installed on the system as well. What version of NI-RIO are you using?
David_L | Certified LabVIEW Architect
LabVIEW Tools Network | LabVIEW Tools Network Developer Center -
How to extract data from a remote system
Hi,
I want to extract data from another system and map it with a target table in my local machine. what is the procedure to do that?
I tried to create another module specifying location of that remote system I could extract the table but when I am mapping with the target table I am getting this error
ORA-04052: error occurred when looking up remote object [email protected]@ORACLE_LOCATION_UBN_15
ORA-00604: error occurred at recursive SQL level 1
ORA-01017: invalid username/password; logon denied
ORA-02063: preceding line from UBNDW@ORACLE_LOCATION_UBN_15
here ORACLE_LOCATION_UBN_15 is the location and UBNDW is the SID for that system
SCOTT is the username I have provided while creating the module
Please help me out with this..
ThanksHi Roberto,
thank you for the fast answer. I have read this before but i don't understand the needed steps on the Oracle-System.
Hope anyone can help me...
Thanks
Muammer
Message was edited by:
Muammer Kizilaslan -
How to get data in the remote system from local system.
Hi everybody,
I have developed four classes.
FileInterface.java:-
import java.rmi.Remote;
import java.rmi.RemoteException;
public interface FileInterface extends Remote {
public byte[] downloadFile(String fileName) throws
RemoteException;
FileServer.java:-
import java.io.*;
import java.rmi.*;
public class FileServer {
public static void main(String argv[]) {
if(System.getSecurityManager() == null) {
System.setSecurityManager(new RMISecurityManager());
try {
FileInterface fi = new FileImpl("FileServer");
Naming.rebind("//10.161.15.219/FileServer", fi);
} catch(Exception e) {
System.out.println("FileServer: "+e.getMessage());
e.printStackTrace();
FileImpl.java:-
import java.io.*;
import java.rmi.*;
import java.rmi.server.UnicastRemoteObject;
public class FileImpl extends UnicastRemoteObject
implements FileInterface {
private String name;
public FileImpl(String s) throws RemoteException{
super();
name = s;
public byte[] downloadFile(String fileName){
try {
File file = new File(fileName);
byte buffer[] = new byte[(int)file.length()];
BufferedInputStream input = new
BufferedInputStream(new FileInputStream(fileName));
input.read(buffer,0,buffer.length);
input.close();
return(buffer);
} catch(Exception e){
System.out.println("FileImpl: "+e.getMessage());
e.printStackTrace();
return(null);
FileClient.java:-
import java.io.*;
import java.rmi.*;
public class FileClient{
public static void main(String argv[]) {
if(argv.length != 2) {
System.out.println("Usage: java FileClient fileName machineName");
System.exit(0);
try {
String name = "//" + argv[1] + "/FileServer";
FileInterface fi = (FileInterface) Naming.lookup(name);
byte[] filedata = fi.downloadFile(argv[0]);
File file = new File(argv[0]);
BufferedOutputStream output = new
BufferedOutputStream(new FileOutputStream(file.getName()));
output.write(filedata,0,filedata.length);
output.flush();
output.close();
} catch(Exception e) {
System.err.println("FileServer exception: "+ e.getMessage());
e.printStackTrace();
After that when i compile classes when i give the command as
rmic FileImpl
in command prompt error is coming like this.
error: Class FileImpl not found.
*1 error*
Can anyone help me please,urgent.It is generating stub and skeleton classes but when iam running FileClient after starting rmiregistry,it is coming something like
FileServer exception: FileServer
java.rmi.NotBoundException: FileServer
at sun.rmi.registry.RegistryImpl.lookup(RegistryImpl.java:106)
at sun.rmi.registry.RegistryImpl_Skel.dispatch(Unknown Source)
at sun.rmi.server.UnicastServerRef.oldDispatch(UnicastServerRef.java:375)
at sun.rmi.server.UnicastServerRef.dispatch(UnicastServerRef.java:240)
at sun.rmi.transport.Transport$1.run(Transport.java:153)
at java.security.AccessController.doPrivileged(Native Method)
at sun.rmi.transport.Transport.serviceCall(Transport.java:149)
at sun.rmi.transport.tcp.TCPTransport.handleMessages(TCPTransport.java:466)
at sun.rmi.transport.tcp.TCPTransport$ConnectionHandler.run(TCPTransport.java:707)
at java.lang.Thread.run(Thread.java:595)
at sun.rmi.transport.StreamRemoteCall.exceptionReceivedFromServer(StreamRemoteCall.java:247)
at sun.rmi.transport.StreamRemoteCall.executeCall(StreamRemoteCall.java:223)
at sun.rmi.server.UnicastRef.invoke(UnicastRef.java:343)
at sun.rmi.registry.RegistryImpl_Stub.lookup(Unknown Source)
at java.rmi.Naming.lookup(Naming.java:84)
at FileClient.main(FileClient.java:9)
Can u help me -
How to access data in the remote system
Hi everybody,
I have developed four classes.
FileInterface.java:-
import java.rmi.Remote;
import java.rmi.RemoteException;
public interface FileInterface extends Remote {
public byte[] downloadFile(String fileName) throws
RemoteException;
FileServer.java:-
import java.io.*;
import java.rmi.*;
public class FileServer {
public static void main(String argv[]) {
if(System.getSecurityManager() == null) {
System.setSecurityManager(new RMISecurityManager());
try {
FileInterface fi = new FileImpl("FileServer");
Naming.rebind("//10.161.15.219/FileServer", fi);
} catch(Exception e) {
System.out.println("FileServer: "+e.getMessage());
e.printStackTrace();
FileImpl.java:-
import java.io.*;
import java.rmi.*;
import java.rmi.server.UnicastRemoteObject;
public class FileImpl extends UnicastRemoteObject
implements FileInterface {
private String name;
public FileImpl(String s) throws RemoteException{
super();
name = s;
public byte[] downloadFile(String fileName){
try {
File file = new File(fileName);
byte buffer[] = new byte[(int)file.length()];
BufferedInputStream input = new
BufferedInputStream(new FileInputStream(fileName));
input.read(buffer,0,buffer.length);
input.close();
return(buffer);
} catch(Exception e){
System.out.println("FileImpl: "+e.getMessage());
e.printStackTrace();
return(null);
FileClient.java:-
import java.io.*;
import java.rmi.*;
public class FileClient{
public static void main(String argv[]) {
if(argv.length != 2) {
System.out.println("Usage: java FileClient fileName machineName");
System.exit(0);
try {
String name = "//" + argv[1] + "/FileServer";
FileInterface fi = (FileInterface) Naming.lookup(name);
byte[] filedata = fi.downloadFile(argv[0]);
File file = new File(argv[0]);
BufferedOutputStream output = new
BufferedOutputStream(new FileOutputStream(file.getName()));
output.write(filedata,0,filedata.length);
output.flush();
output.close();
} catch(Exception e) {
System.err.println("FileServer exception: "+ e.getMessage());
e.printStackTrace();
After that when i compile classes when i give the command as
rmic FileImpl
in command prompt error is coming like this.
error: Class FileImpl not found.
1 error
Can anyone help me please,urgent.It is generating stub and skeleton classes but when iam running FileClient after starting rmiregistry,it is coming something like
FileServer exception: FileServer
java.rmi.NotBoundException: FileServer
at sun.rmi.registry.RegistryImpl.lookup(RegistryImpl.java:106)
at sun.rmi.registry.RegistryImpl_Skel.dispatch(Unknown Source)
at sun.rmi.server.UnicastServerRef.oldDispatch(UnicastServerRef.java:375)
at sun.rmi.server.UnicastServerRef.dispatch(UnicastServerRef.java:240)
at sun.rmi.transport.Transport$1.run(Transport.java:153)
at java.security.AccessController.doPrivileged(Native Method)
at sun.rmi.transport.Transport.serviceCall(Transport.java:149)
at sun.rmi.transport.tcp.TCPTransport.handleMessages(TCPTransport.java:466)
at sun.rmi.transport.tcp.TCPTransport$ConnectionHandler.run(TCPTransport.java:707)
at java.lang.Thread.run(Thread.java:595)
at sun.rmi.transport.StreamRemoteCall.exceptionReceivedFromServer(StreamRemoteCall.java:247)
at sun.rmi.transport.StreamRemoteCall.executeCall(StreamRemoteCall.java:223)
at sun.rmi.server.UnicastRef.invoke(UnicastRef.java:343)
at sun.rmi.registry.RegistryImpl_Stub.lookup(Unknown Source)
at java.rmi.Naming.lookup(Naming.java:84)
at FileClient.main(FileClient.java:9)
Can u help me -
How to Download a file from remote system.
Hi,
If anybody knows how to download a file directly from database to localdirectoryI have data in a blob column of one table.
from a html page if i click download link then a download dialog box shoud come saying save and cancle etc ., the blobdata from database should be retrived and stored in desired loaction in client system. -
How to start Archiving process in production system.
Dear Experts,
As i was new to archiving process need help regarding this.as our client as 1.3 Tb of data with them,as they want to clean the unwanted data from the database.as they are using windows 2003 as server, oracle as database and using sapr/3 4.6 c.i want to know from where i have to start the process.i have read so many threads regarding this.they are helpful for me.i have some queries that i have to clarify.
1) I have found which table increasing more in database.,i have checked (DB15 ,SAARA).how to find this has to archive.
2) Data which is not important who has to delete that data.i heard data deletion is not basis work.
3) After deleting data in datbase without reorganising space will not be empty is this may be the cause??
4) is there any data loss in reoraganising??
5) is there any way to do reorganising with brtools in oracle.??
Please clarify me.
Regards,
Naveen NDear Naveen,
Data archiving is an inter-departmental activity.
The person responsible for each application (which he/she is using in SAP Solution to carry out the business process) should be involved in SAP Data Archiving Process/Activities.
The team should be grouped with the persons responsible for each application.
After the planned Analysis, The team grouped for executing the Data Archiving process produce the checklist for Archive Data (based on your business process and other dependent factors). They will provide the inputs (archiving objects) for Data Archiving requirements.
Moreover, As a part of Data Archiving process, you will have to delete the planned archive data from the actual Database. So, some spaces will become free in Database but all will be scattered in its respected Tablespace(s) in random manner. You will have to perform Database Reorganization to regain the free space.Because, The Data is stored in Database in form of Fragmented database objects (Tables/Indexes) in its respective Tablespace (s).Reorganization is generally performed to defragment these database objects. By doing so, one can improve performance and regain the space within tablespaces that was being unused due to fragmentation.
I hope this information will be helpful.
Regards,
Bhavik G. Shroff -
How to start weblogic server with non system user
I want to start wls6.1 as an nt service with different user name other than
system.
Thanks
MadhuI have installed weblogic server as an nt service. In install Nt service
cmd, if I make any change in the script, I have to uninstall and install it
again. I do not know where to specify the weblogic.management.username =(Non
system user)
I have created a user name in NT server and added them to Administrator
group. I have also modified in file realm propertes i.e to boot and shutdown
the non system user.
I have to start weblogic server as a non system user.
Thanks
Madhu
I think I replied to some of the questions when I found out the answers.
Only thing I did was hit reply, instead of reply group. Might it went to
persons e-mail. That might be the reason, the answers I posted is not found
in the newsgroup
Thanks
freelance_code_inspector <[email protected]> wrote in message
news:[email protected]..
"m holur" <[email protected]> wrote in message
news:<3bfbafce$[email protected]>...
I want to start wls6.1 as an nt service with different user name otherthan
system.Madhu,
Specify weblogic.management.username={Non system user} in your -D
option. BTW, just curious, have observed that u have been posting a
lot of weblogic questions lately, did u find out the answers? If so, u
should share it back to this community.
Regards
drit
Freelance Java Developer/Code Inspector
http://www.geocities.com/doc_i_t/CodeInspectionService.html -
How can use FileChooser to navigate remote system
Assume that in server program i have a JFileChooser and when i specify the ip address of client system i want navigate client file sytem
if u have any idea about it please give meAssume that in server program i have a JFileChooser and when i specify the ip address of client system i want navigate client file sytem
if u have any idea about it please give me -
Start $ stopping server in remote
How to start and stop a remote server through java
You can't stop just any server. Some operating systems migh have commands which allow you to stop a sever. You need to invoke those commands using Runtime.exec
Kaj -
Starting a java program on System boot/startup
Hi,
I am trying to find out how to start a java program on system startup which basically spawns a Thread which in turn does some processing.
Came across windows specific options which help one make it as a service.Making a .bat for windows and .sh for linux could be a option but not sure where to put these in respective OS or whether it is a good option.
If someone has tried out similar thing please let me know the details for the same.
Regards
Raj[codes]
in command prompt
type edit startupor somename.bat
then type
cd C:\Program Files\Java\jdk1.5.0_01\bin
javac data1.java
java data1
and save
[codes]
copy startup.bat file
and click on start-->programs--> startup(rigthclick and open)
then paste that file into that folder...
now you ll get that file opened whenever system boots.
reply if this was usefull;) -
How to start listener in sql developer for remote debug
how to start listener in sql developer for remote debug ? Since the new version 1.1.0.23 is different with the old version for remote debug, I don't know how to start the listener on the new version for remote debug.
even follow the user guide below and not work . Experts on sql developer please help me with this.
Remote Debugging
To debug a procedure or function for a connection where the database is on a different host than the one on which you are
running SQL Developer, you can perform remote debugging.
Remote debugging involves many of the steps as for local debugging; however, do the
following before you start the remote debugging: Use an Oracle client such as SQL*Plus to issue the debugger connection command. Whatever
client you use, make sure that the session which issues the debugger connection commands is the same session which executes your PL/SQL
program containing the breakpoints.
For example, if the name of the remote system is remote1, use the following SQL*Plus command to open a
TCP/IP connection to that system and the port for the JDWP session:
EXEC DBMS_DEBUG_JDWP.CONNECT_TCP('remote1', '4000'); The first parameter
is the IP address or host name of the remote system, and the second parameter is the port number on that remote system on which the debugger
is listening.
Right-click the connection for the remote database, select Remote Debug, and complete the information in the Debugger - Attach
to JPDA dialog box. Then, follow the steps that you would for local debugging (for example, see Debugging a PL/SQL Procedure).
Debugger - Attach to JPDA This dialog box is displayed when you right-click a database connection name and select Remote Debug.
Use this
dialog box if you are using the Sun Microsystem's Java Platform Debugger Architecture (JPDA) and you would like the debugger to listen so
that a debuggee can attach to the debugger.
For more information about remote debugging, see Remote Debugging.
Host: Name or IP address of
the remote host on which SQL Developer should listen for the database to connect.
Port: Listening port number on the remote host. You can
choose any valid port number that is not in use by another process.
Timeout: The number of seconds that SQL Developer will wait for the
remote database to make a debugging connection. Don't Show Dialog Box Before Connecting: If this option is checked, this dialog box will not
be displayed before future connections for remote debuggingYou're not the only one:
Not able to start remote debug listener
Re: remote debug question at version 1.1.0.23 64 -
How to pass parameter into remote system
i'm doing a small testing on remote connection where i need to remotely login to another NT machine by using JAVA code. therefore i need to send over the ctrl-Alt-Del command by using ASCII code as well as the username and password to login to the remote NT machine. My problem is after my JAVA code start up the VNC connection, the ASCII code and parameter passing was executed before the VNC window popup therefore the parameters are not received by the remote end.
Hi oling,
i am really not sure how u can invoke or rather pass parameters to a Remote System thru Java, where no Java server is running.
which Java Api do u use to connect to remote System. How will the remote System understand the serialised bytes transferred thru ur program.
The Bottomline is i am confused how will the connection haapen after all!!!!!!!!!!!!!!!!!!!!!
can u please explain this or rather pass me the Code...
Thanks in advance,
Manja -
How to create a jar file which is in the remote system?
Hi,
I have a set of files that resides in a remote system,which have to be "jar"red. I have a firewall in between. I want to create a jar file out of the files situated in the remote system.How do i go about this process.?Hi,
You can't do that in a simple way. You need to have a port open in the firewall, and you need to have a server process on the remote machine.
Kaj
Maybe you are looking for
-
Sale order document flow-u0091Service Documentsu0092 is coming which should't aper
New Issue with Sales order document flow: When linking from a sales order in document flow, we were reviewing why the description information varied. In looking at different values, we clicked on a new item within document flow that allows you to li
-
Hello Folks; Got a weird one... I am sending replies from a thread in Mail and they seem to have been sent (sounds) but they don't show in the Sent mailbox... O-0 These messages seem to have been delivered to cyberspace as they don't show in my Sent
-
Hi friends, What is the use of events in abap programing thanks and regards, Binoy R Moderator message: please search for available information/documentation before asking, do not ask interview-type questions. Edited by: Thomas Zlo
-
USB Flash drive not showing on DT
Hi folks, I received a USB flash drive with 2 GB capacity made by Super Talent (www.supertalent.com- look under Aluminum flash drives). Upon plugging it into the G5's USB port (i've tried them all) I get a "Cannot recognize- Initialize/Ignore/Eject"
-
Anyone else feeling like this is more trouble than it is worth?
I am currently under the grandfather plan of unlimited data, text with 450 minutes and an employee discount. I have enjoyed the usage of my Droidx for almost 3 years now. It had a good run, but the pinch of an $80 smart phone plan just doesn't seem w