How to tell when View is about to transition to another view and when the app is going to backgorund

Hello,
I have a view that displays an actionContent button and removes it when the view goes away.
I add it on the creationComplete event handler and remove it on the viewDeactivate event handler.
The problem is that the viewDeactivate is fired when the the Menu button is pressed or a phone call is received for example and thus it removes the button.
When the application is brought back, the button is no longer there.
Although I can add the code to create the button again on viewActivate this time, I wonder if there is a better way to do this.
Thank you.

viewDeactivate - fires when view slided out and when app goes to background
removing - fires when slide out effect started
remove - fires when slide out effect ended

Similar Messages

How to tell when the interface is down and was last active.

Is there a function within Cisco Prime Infrastructure 2.0 (2.0.0.0.294) that will display the last time that an interface was active? Our end switch hardware is as follows C2960s-48fps and C3750-48PS-S.
See below for command and command output from the console of one of our switches.
C2960s-48fps#show int gi1/0/6 | include Last | proto
GigabitEthernet1/0/6 is down, line protocol is down (notconnect)
Last input never, output 1w6d, output hang never
Above is an example of one interface but can this be accomplished for all interfaces on the said switch?
Thanks
Message was edited by: Bobby Sasser The following is the response that Cisco TAC sent. Not happy with this answer! Unfortunately , Prime doesn’t collect those precise information. So apparently you won’t be able to poll that information from the device.

You have not posted to code for Stopper, so it's impossible to reason about that
1. How can I tell when thread is finished?
Use Thread.Join() or Thread.isAlive()
2. How do I kill this thread once it is finished?
You can't and you don't. Just let the method the thread is running exit normally. Sometimes that means putting in a boolean variable to control a loop, and then exiting when the boolean is false.
Another thought - you could set the thread as a Daemon thread - when you don't have any non-daemon threads running, java will exit.

Thread: How to tell when the thread is finished AND how to kill it?

Hi there,
I have a thread that runs in the background and does this:
class MyThread implements Runnable
          public void run()
               Stopper stopper = new Stopper();
                        //do something that takes some time
                        stopper.stop();
                        System.out.println("total time "+stopper.getTime());
}this works fine (I have a swing gui where I click a button and this thread runs and it's ok. PROBLEM IS, when I click the button again (to re-activate the thread) it seems that the stopper is not null but still counting the time (I was under the impression that ...= new Stopper() will create a new object type Stopper).
so -
1. How can I tell when thread is finished?
2. How do I kill this thread once it is finished?
the invocation:
     public void actionPerformed(ActionEvent arg0)
          Thread t = new Thread( new MyThread());
          t.start();
     }THANK YOU!

You have not posted to code for Stopper, so it's impossible to reason about that
1. How can I tell when thread is finished?
Use Thread.Join() or Thread.isAlive()
2. How do I kill this thread once it is finished?
You can't and you don't. Just let the method the thread is running exit normally. Sometimes that means putting in a boolean variable to control a loop, and then exiting when the boolean is false.
Another thought - you could set the thread as a Daemon thread - when you don't have any non-daemon threads running, java will exit.

How to tell when the load to start

Hi,
don't even know where to look for the answer, so I apologize
if this topic was already opened. Here's my case. In main flash
movie load another flash movie, where different items come from
left and right side of the screen (full screen window). After a
click on one item, all the item go the sam eway off the screen and
another movie loads. Question. How to tell the flash that first all
the items must go off the screen and then unload that movie and
load the new one?
THX for the help

jo3 wrote:I'm curious to know what time my system lost power, whats a good way to tell? I have been checking the logs to get the last entry times but was curioius if there were other methods of telling when the box's power was interrupted?
A rather ghetto way of doing it:
#!/bin/bash
log="/var/log/uptime-poll"
pollsecs=10
echo $$ > /var/run/uptime-poll.pid
if [[ -f "$log.tmp" ]]; then
echo "Lost power at: `cut -d';' -f2 "$log.tmp"`" >> "$log.log"
fi
while :; do
date +'%s;%D %T' > "$log.tmp"
sleep $pollsecs
done
...and in /etc/rc.local.shutdown...
killall $(cat /var/run/uptime-poll.pid)
rm /var/run/uptime-poll.pid
rm /var/log/uptime-poll.tmp
Last edited by Wintervenom (2009-08-29 06:37:29)

How to tell when the system was shut down?

I'm curious to know what time my system lost power, whats a good way to tell? I have been checking the logs to get the last entry times but was curioius if there were other methods of telling when the box's power was interrupted?

jo3 wrote:I'm curious to know what time my system lost power, whats a good way to tell? I have been checking the logs to get the last entry times but was curioius if there were other methods of telling when the box's power was interrupted?
A rather ghetto way of doing it:
#!/bin/bash
log="/var/log/uptime-poll"
pollsecs=10
echo $$ > /var/run/uptime-poll.pid
if [[ -f "$log.tmp" ]]; then
echo "Lost power at: `cut -d';' -f2 "$log.tmp"`" >> "$log.log"
fi
while :; do
date +'%s;%D %T' > "$log.tmp"
sleep $pollsecs
done
...and in /etc/rc.local.shutdown...
killall $(cat /var/run/uptime-poll.pid)
rm /var/run/uptime-poll.pid
rm /var/log/uptime-poll.tmp
Last edited by Wintervenom (2009-08-29 06:37:29)

Problems to download folios in the content viewer and in the app viewer

Hi there!!
I am having a problem and want to know if somebody can help me.
Since a few days, in 9 folios whose particular being very heavy (170-350 MB) can not be updated on the Ipad. On our test Ipads appears a message that the server is not responding.
Before last thursday I made multiple changes and updates to these folios and I doesn‘t have any problem to upload from InDesign and download and update the foliosin the Ipad. Even I built the viewer in the app builder and published one of the folios and the problem is the same.
I create an app (single folio) directly from InDesign using my creative cloud user and the app works good, but the idea it‘s include this folio in a viewer with many other contents.
Any advice!
Thanks!
Mauricio

Hi John,
This problem is new to you or already had before?
Because for me it‘s new, I've been working on these folios over a month, rising corrections uploading from InDesign and testing on ipads many times and had not had this kind of trouble!

How to tell when downloading raw and jpeg images is complete

i just installed lr 3 and have a new mb 8 gb of ram and dont know how to tell when the download of raw and jpeg is done .ie the time from thumbnail to full down loads

There should be a progress bar in the upper left corner when in library module.

How to create a Notification in the Action center when the app is in the suspended state...?

Hi,
I want to send a notification to the action center of Windows phone 8.1, when I get a callback from the lower layer code which I have registered for(I have implemented). I am able to do it when my app is in the foreground. How can I achieve the same when
the app is in the background.(ie. in the suspended state)

Yes Franklin, your understanding is correct. But I cannot use Push Notification, as it require a cloud server to send the raw notification.
Is there any other method, which can be used to trigger the app (ie... the background service registered) to send a toast message, when app is in background. Trigger should be initiated by a lower layer service running as different process. I am looking
for something similar to "Broadcast Receiver" in Android...
Hi Jose,
>>But I cannot use Push Notification, as it require a cloud server to send the raw notification
The Background Task is the only way to make things work in the background in Windows phone, it have some triggers we can use, such as
SystemTrigger,
TimeTrigger, or
NetworkOperatorNotificationTrigger:
https://msdn.microsoft.com/en-us/library/windows/apps/windows.applicationmodel.background.backgroundtaskbuilder.settrigger
I would also recommend you to read this sample:
https://code.msdn.microsoft.com/windowsapps/Background-Task-Sample-9209ade9
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to create Maintaince View and Help View

Hi,
Can u pls tell me the step by step procedure for how to
create Maintaince View and Help View.
And what's the use of these view's.
Regards,
Kumar

FOR MAINTANENCE VIEW
Create a table or a view in transaction SE11.
A function group in SE80 transaction
1>go to se54 transaction.
2>give the name of the table /view starting from z.
3>select "Generated Objects" radio button.
4>click on "create/change" push button.
5>you get a pop asking you whether to create modules ,click on YES
6>give "authorization group" as temp.
7>give the function group name created by you.
8>click on "find Scr numbers "push button on the application tool bar.
9>in the pop up that you get select the 1st option and press enter
10>click on the create push button (it is beside "Find Scr numbers" push button)
11>selct local object and pres enter.
12>go to SM30 transaction.
13>give the table/view name
14>click on "maitain" push button.

HT201272 I purchased a large app early 2012. It was updated late 2012 to support iOS 6 and iPhone 5. Unlike other apps that I've purchased which say "open" when I view them in the App Store, this one shews a purchase price. I've deleted and uploaded this

I purchased a large app early 2012. It was updated late 2012 to support iOS 6 and iPhone 5. Unlike other apps that I've purchased which say "open" when I view them in the App Store, this one shews a full purchase price. I've deleted and downloaded this app before. If I delete it again will I be made to pay for it again? or will it download with everything anew? or will I lose the app?

If you are completely confident that you didn't hide it, then you purchased those with different apple id. If you completely confident that you purchases with same apple id then you have hidden it. One of the other or you are speaking about a miracle. While miracles are possible they are not very likely. Remember
Occam's razor?

Trouble with viewing font on spine of Photo book. I can't find a way to view and edit the text which appears on the spine of the dustcover or the book itself when printed.

I can't find a way to view and edit the text which appears on the spine of the dustcover or the photo book itself. When I preview the book it appears on the dustcover and the book, but not when I'm back in the creation or editing windows. I've printed 4 books in a series and two spines are one font size, and two others are a different font size. One of the books has a shortened title on the book spine.

The text on the spine will be the same text that is in the Title text box on the title page. You can change the font and style of that text just like you change any text in Aperture. Aperture will size and center the spine text for you
If you want the content or the font and style of the text to be different from your Title box text then you have to trick the program a bit. Put the text that you want in the spine into the Title text box and then move that box to a place on the page where it will not be visible when printed ( Y coordinate -1.0 inches for example). Don't move it too far away or it will be hard to get back to in order to make an edit. Then make a new text box on the title page and put the text you want on the cover in that. (Or make a book without text on the cover , but with text on the spine).
You are 100% correct in that you can not preview this unless you preview the printed book

Can a subVI tell when the application it is part of has been stopped and restarted?

Can a subVI tell when the application it is part of has been stopped and restarted?
It is easy enough for a subVI to tell when it has been run for the first time after having been loaded into memory. But is there a way for a subVI to tell when the application it is part of has been stopped and restarted? Is there some property or application-invocation-specific refnum that when queried multiple times during the same run of the application would return the same value yet when queried during different runs of the application would return different values?
I don�t want to depend on anything that happens when a run is exited.
I don�t want to require code to be included in the main V
I to accomplish the solution.
(Otherwise I could, in the main VI create an un-named semaphore tied to a global; the subVI could then check the global to see if the value changed, which it would between runs of the application.)
Any ideas?

Have you tried the First Call? function? It's on the Advanced>Synchronization palette.

How to specify when the authorization check is to be performed

How to specify when the authorization check is to be performed declratiely for
any webapplication.
There is Direction object argument as part isAccessAllowed method of AccessDecesion
class which can have either of the three values i.e. POST, PRE, & ONCE. Ijust
wana know how can we declaratively set this direction value for any Web Resource
in weblogic server 8.1 security
-Subhash

"Subhash Chopra" <[email protected]> wrote in message
news:3e9c5805$[email protected]..
>
How to specify when the authorization check is to be performed declratielyfor
any webapplication.
There is Direction object argument as part isAccessAllowed method ofAccessDecesion
class which can have either of the three values i.e. POST, PRE, & ONCE.Ijust
wana know how can we declaratively set this direction value for any WebResource
in weblogic server 8.1 security
The containers always call the isAccessAllowed method with no direction so
Once is passed
to the providers. There is no way to set the direction that the containers
use.
-Subhash

When starting Final Cut Pro 7.0.3 I am all of a sudden getting a message that says "One or more of the scratch disks don't have read/ write access" and now the app won't operate - how do I fix this so I can use Final Cut Pro?

When starting Final Cut Pro 7.0.3 I am all of a sudden getting a message that says "One or more of the scratch disks don't have read/ write access" and now the app won't operate - how do I fix this so I can use Final Cut Pro?

Glad you found the answer. But something seems wrong. FCP should be able to assign the scratch disk to your startup drive. It's not advisable, but it should be possible. You might want to try and figure out what's going on before what ever's going on cause other problems.

How do I install InDesign CC when the app overview says "up to date" even though I haven´t installed anything yet?

How do I install InDesign CC when the app overview says "up to date" even though I haven´t installed anything yet?

It sounds like maybe you installed a trial at some point in the past and trashed the application folder rather than doing an uninstall?
Have you tried the cleaner tool:
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6

How to tell when View is about to transition to another view and when the app is going to backgorund

Similar Messages

Maybe you are looking for