How to test AV transmission on one PC

Problem:
I tried to run the AVTransmit2.java and AVReceive2.java (from sun website (JMF solutions)) on the same PC with the follwing commands.
java AVTransmit2 vfw://0 127.0.0.1 2020 (1st console)
--> The RTP session starts smoothly and starts transmitting for 60 seconds (No hassles so far).
java AVReceive2 127.0.0.1/2020 (2nd console)
-->Error: Cannot open RTP session on the port.
(( I believe that at the receiving end, we need to listen to the same port from where it is being sent by the server))
I also tried Transmit option in JMStudio and its working absolutely fine.
Please help. Any advice would be appreciated.
Krishan.

Hi,
It worked for me in using Tx and Rx because you can specify the ports for sending and receiving, you can't specify different ports in AVTransmit2/AVReceive2 so I think that's where your problem is.
For example
Tx
Local host : 192.1.1.1
Data port : 44444
Target IP Address : 192.1.1.1
Data port 22222
Rx
Local host : 192.1.1.1
Sender IP : 127.0.0.1
Sender port : 44444
Local port : 22222
Kate

Similar Messages

How to test video chat on one computer?

I can't test any transmision on one computer, I can transmit captured video to 127.0.0.1 but I can't receive it (unable to create sesion manager). Do I have to test it on 2 hosts?

u can do it in single system..
first use JMF studio to transmit and receive the video transmission,
if it doesnt work assign some ip for your system and transmit using multicast ip for example(192.168.1.255) and recieve. this have to work.
if not chk ur programe for errors in processor/player creation and intilization
rgds
-venkat

How to test exit EXIT_SAPLEINM_018

Hi Experts ,
I have made some changes for documentation.EXIT_SAPLEINM_018 which is related to any purchasing document
but i don't know how to test it.
can any one pls help me how to test it ?
answer will be rewarded
regards

Put session break-point in the enhancement, Run the transaction to test the functionality.
Regards
Vinod

How to make sure all my automatic test case run in one session?

Hi guys,
I'm doing some automatic test for our products.
Now i'm hindered by an issue(maybe,due to my wrong configuration).
I've wrote some test method in a Coded UI Test project,and these run perfect on local machine.And i build an environment includes Builder Controller,Builder Agent,TestController and Test Agent etc, and that the test cases have been written
in MTM already.
After that,i built the project,deployed the project and run the Coded UI Test on Test Agent machine,and i found it seems that he test cases run on different sessions.I have no idea how to config or set up to make sure all my test cases
run just in one session.
Could anyone help me,please?

Hi dean.chen,
>>I found it seems that he test cases run on different sessions.I have no idea how to config or set up to make sure all my test cases run just in one session.
According to your description, could you please tell me what the different sessions are when you run the test cases in MTM?
Why did you want to run the test cases in one sessions?
where did you see the test cases run on different sessions?
Could you please tell me how many test agents machine you use to run these automatic test cases in MTM?
As far as I know that if you just use one test agent machine to run these automatic test cases in MTM, these test cases will be run one by one on the one test agent machine.
To help you solve this issue, please tell me more detail message about this issue.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to test a simple PL SQL function from another PL SQL script

Hi,
I have created a function. Now i need to test that whether it is returning the correct values or not.
For that, i have written anothe pl sql script and trying to call this function. Im passing all the IN parameters in that function. I assume here that OUT parameters will provide me the result. Im trying to display the OUT parameter one by one to see my result.
I'm using toad as sql client here connected with oracle.
pl sql script:-
DECLARE
BEGIN
     DBMS_OUTPUT.PUT_LINE('$$$$$$$ VINOD KUMAR NAIR $$$$$$$');
     FETCH_ORDER_PRODUCT_DATA(320171302, 1006, 6999,
ODNumber OUT VARCHAR2, Line_Number OUT VARCHAR2,
ServiceID OUT VARCHAR2, BilltoNumber OUT VARCHAR2,
AnnualPrice OUT NUMBER, CoverageCode OUT VARCHAR2)
DBMS_OUTPUT.PUT_LINE('HERE IS THE RESULT ' | ODNumber );
DBMS_OUTPUT.PUT_LINE('HERE IS THE RESULT ' | Line_Number );
DBMS_OUTPUT.PUT_LINE('HERE IS THE RESULT ' | ServiceID );
DBMS_OUTPUT.PUT_LINE('HERE IS THE RESULT ' | BilltoNumber );
DBMS_OUTPUT.PUT_LINE('HERE IS THE RESULT ' | AnnualPrice );
DBMS_OUTPUT.PUT_LINE('HERE IS THE RESULT ' | CoverageCode );
END;
Function:-
Program Name : SPOT_Order_Product_Data_For_CFS.sql
Description : Function to Validate parameters from CFS
By : Vinod Kumar
Date : 08/19/2011
Modification History
By When TAR Description
CREATE OR REPLACE FUNCTION FETCH_ORDER_PRODUCT_DATA(orderNumber IN VARCHAR2, customerNumber IN VARCHAR2,
productLine IN VARCHAR2, ODNumber OUT VARCHAR2,
Line_Number OUT VARCHAR2, ServiceID OUT VARCHAR2,
BilltoNumber OUT VARCHAR2, AnnualPrice OUT NUMBER,
CoverageCode OUT VARCHAR2)
RETURN VARCHAR2 IS
lv_err_msg VARCHAR2(100) := '';
lv_bucket_id VARCHAR2(14);
lv_bill_number VARCHAR2(30);
lv_anual_price NUMBER;
lv_coverage_code VARCHAR2(8);
lv_quote_num NUMBER(10) := NULL;
lv_line_num NUMBER(5) := 0;
lv_customer_number VARCHAR2(30) := customerNumber;
lv_product_id VARCHAR2(14) := productLine;
lv_count_quote NUMBER := 0;
lv_quote_status VARCHAR2(5);
lv_quote_version NUMBER(2):=0;
BEGIN
IF INSTR(orderNumber, '-') = 0 THEN
lv_quote_num := orderNumber;
ELSE
lv_quote_num := SPT_Delimiter(orderNumber, 1, '-');
lv_line_num := SPT_Delimiter(orderNumber, 2, '-');
END IF;
--Check status of the quote COM, APP
SELECT COUNT(*) INTO lv_count_quote FROM sot_order_header WHERE ORDER_NUMBER=lv_quote_num
AND ORDER_STATUS IN ('APP', 'COM') AND CUSTOMER_NUMBER = lv_customer_number;
IF lv_count_quote = 0 THEN
lv_err_msg := 'Invalid Order number';
RETURN lv_err_msg;
END IF;
-- Fetch the latest version on SPOT quote
SELECT MAX(VERSION_NUMBER) INTO lv_quote_version FROM SPT_QUOTE_HEADER WHERE QUOTE_NUMBER = lv_quote_num
AND CUSTOMER_NUMBER = lv_customer_number;
-- If quote is valid fetch the data in OUT parameters
IF lv_line_num = 0 THEN
BEGIN
SELECT a.CUSTOMER_BILLTO_NUMBER,
b.LINE_NUMBER, b.BUCKET_ID,
b.ANNUAL_REF_RATE_USD, b.COVERAGE_CODE
INTO lv_bill_number,lv_line_num,lv_bucket_id,lv_anual_price,lv_coverage_code
FROM SPT_QUOTE_HEADER a, SPT_QUOTE_LINE b
WHERE a.QUOTE_NUMBER = lv_quote_num
AND a.CUSTOMER_NUMBER = lv_customer_number
AND a.VERSION_NUMBER = lv_quote_version
AND a.QUOTE_NUMBER = b.QUOTE_NUMBER
AND a.VERSION_NUMBER = b.VERSION_NUMBER
AND b.PRODUCT_ID = lv_product_id;
ODNumber := lv_quote_num;
BilltoNumber := lv_bill_number;
Line_Number := lv_line_num;
ServiceID := lv_bucket_id;
AnnualPrice := lv_anual_price;
CoverageCode := lv_coverage_code;
RETURN '';
EXCEPTION WHEN OTHERS THEN
lv_err_msg := 'Multiple PIDs existing in the SPOT order, please provide the SPOT order + line number as input data';
RETURN lv_err_msg;
END;
ELSE
BEGIN
SELECT a.CUSTOMER_BILLTO_NUMBER,
b.BUCKET_ID, b.ANNUAL_REF_RATE_USD,
b.COVERAGE_CODE
INTO lv_bill_number,lv_bucket_id,lv_anual_price,lv_coverage_code
FROM SPT_QUOTE_HEADER a, SPT_QUOTE_LINE b
WHERE a.QUOTE_NUMBER = lv_quote_num
AND a.CUSTOMER_NUMBER = lv_customer_number
AND a.VERSION_NUMBER = lv_quote_version
AND a.QUOTE_NUMBER = b.QUOTE_NUMBER
AND a.VERSION_NUMBER = b.VERSION_NUMBER
AND b.PRODUCT_ID = lv_product_id
AND b.LINE_NUMBER = lv_line_num;
ODNumber := lv_quote_num;
BilltoNumber := lv_bill_number;
Line_Number := lv_line_num;
ServiceID := lv_bucket_id;
AnnualPrice := lv_anual_price;
CoverageCode := lv_coverage_code;
RETURN '';
EXCEPTION WHEN OTHERS THEN
          lv_err_msg := 'Multiple SPOT lines exist with same parameter';
          RETURN lv_err_msg;
END;
END IF;
EXCEPTION
WHEN OTHERS THEN
lv_err_msg := '@@@ EXCEPTION THROWN @@@ '|| SUBSTR(SQLERRM,1,120);
RETURN lv_err_msg ;
END;
Don't look at the function, it might have errors but my primary concern is how to test this function. Once I start doing its testing then only i can understand any bugs(if any).
My pl sql is not so good. Im still learning. I don't understand IN and OUT parameters are.
I just know that IN parameters r those whick we pass in to the function wen we call it and OUT parameters are those through which we get the result.
Thanks in advance
Vinod Kumar Nair

20100511 wrote:
I wondered how I could test the output of the function from within TOAD?I usually create the following function in my developer schema:
create or replace function BoolToChar( b boolean ) return varchar2 is
begin
if b then
    return( 'TRUE' );
else
    return( 'FALSE' );
end if;
end;To test a function like yours, the following will do in SQL*Plus/TOAD/etc:
begin
DBMS_OUTPUT.put_line(
    BoolToChar( XCCC_PO_APPROVALLIST_S1.does_cpa_exist(1017934) )
end;
I'm probably doing 101 things wrong here, but thought I'd ask anyway and risk being shouted at.Shout at? You reckon? I thought people risked being beaten with a lead pipe, or pelted with beer cans and stale pretzels - which makes being shouted at a really safe and viable alternative. {noformat};-){noformat}

How to set cookie value in one page and retrieve in another page using setA

How to set cookie value in one page and retrieve in another page using setActionListener?
I have tried with following code srcpage.jspx->destpage.jspx
srcpage.jspx
<af:table value="#{bindings.DepartmentsView1.collectionModel}"
var="emp" rows="#{bindings.EMPView1.rangeSize}"
first="#{bindings.EMPView1.rangeStart}"
emptyText="#{bindings.DepartmentsView1.viewable ? 'No rows yet.' : 'Access Denied.'}">
<af:column sortProperty="EmployeeName" sortable="false"
headerText="Cookie Testing">
<af:commandLink text="#{emp.EmployeeName}" action="success">
<af:setActionListener from="#{emp.EmployeeName}"
to="#{cookie}"/>
</af:commandLink>
</af:column>
</af:table>
espage.jspx
<af:outputText value="Test Cookie Value: #{cookie}"/>
,Here Test Cookie Value prints the following instead of its original String value
{JSESSIONID=javax.servlet.http.Cookie@7da288, oracle.uix=javax.servlet.http.Cookie@399f62}
I have passed employee name "Robert" to cookie in srcpage.jspx,but it prints "JSESSIONID....." instead of "Robert" in destpage.jspx
Thanks in advance
Kalee

Hi,
"cookie" is a reserved name. If you want to write to a session scope attribute called "cookie" then you have to call #{sessionScope.cookie}. If you want to use EL to set and read from cookies then you will have to use
#{cookie.cookieName}
Note that #{cookie} writes to and returns a map
check this: http://www.informit.com/articles/article.aspx?p=30946&seqNum=7
Frank

How to test the rule if multiline container is passing to the task?

Hi Experts,
                  I am working on leave workflow. I have to get the approvers based on no of days of leave and leave type. I am getting these details in ITEMS_TAB internal table. I am passing this table to a rule. Now my problem is when I tried to simulate the rule I am not getting any input screen to enter the data.
ITEMS_TAB is an internal table type of   "PTREQ_ITEMS_WF_TAB_FLAT".
In the rule I have created a container by selecting the radiobutton "ABAP Dict. Data Type" and entered the above reference parameter is it right way?
Is it possible to test the rule independently if I use multiline container as import parameter in my rule? If so can anybody please tell me how to test the rule?
Thank You.
Srija.

Hi Pavan,
                 Thank you.
                 To copy the values I am not getting any input screen to input the values. I observed one thing that the type that I am referring in the Rule is a deep structure. Is this is the reason that I am not getting the input screen to enter the values?
I tested by creating aother rule by taking a field for that rule I am getting the input screen to simulate the Rule.
Can you please suggest if the rule will not work then what I have to do? without the rule how can I get the agents?
Thank you.
Srija

In flex, How to set a value to one parameter, the parameter defined in a cffunction in a cfc file

In flex, How to set a value to one parameter, the parameter
defined in a cffunction in a cfc file, In the cffunction there are
much cfargument, I want set a value to one of them, such as the
cfc:
<cffunction access="remote" name="myShow" output="false"
returntype="struct">
<cfargument name="ID" type="numeric" default=0>
<cfargument name="GoodsID" type="string" default="">
<cfargument name="DestTime" type="string" default="">
<cfargument name="DestCount" type="numeric" default=1>
How I set a value to only parameter one of them , such as set
GoodsID when use mx:remoteObject.
Thanks for your help

Got maybe a solution for you, I have just tested it.
So, the idea is to use intermediate variables. Imagine Var1 and Var2 variables that you refresh with your more or less complicated queries. Then what you can do is to refresh your final variable Var3 with a query using your intermediate variables. Here is an example for Oracle:
select #Var1+#Var2 from dual
This way you can make a chain of dependent variables: Var3 is using Var2 and Var2 is using Var1.
Hope it helps.
Shamil

How to test a plug_in without Adobe Reader Integration Key?

I havge a project to create a plug_in for acrobat reader with Adobe Acrobat 8.1 SDK. I also apply for the Adobe Reader Integration Key, but I have not it by now. But deadline of the project is coming, is there any one who can tell me how to test the plug_in without Adobe Reader Integration Key?
I also have another question, does the plug_in I make with Adobe Acrobat 8.1 SDK can be compatible for all the version of Acrobat reader, such as 7.0, 8.0 and so on? Thank you.

You test the plug-in, as well you can, using Acrobat. You also build
it using the preprocessor options to build a Reader plug-in, so you
don't accidentally use an API not in Reader.
If you are saying, is there w way around the Integration key for
testing in Reader, the answer is no.
Different Reader keys and tools are needed for each version of Reader.
You will probably not get a key for an old version of Reader.
Aandi Inston

How to test the interfaces in XI ?

Hi ,
Our Xi system is being upgraded from 3.0 to 7.0. I was asked to test the interfaces once the upgradation is done. I am not sure how this testing is to be done and will there be aby test plan for this??
Can some one help me on this ??
Thanks in Advance,
Hemanthika

To test, you must have imported all your scenarios in to your new system.then couple of general tips,
1.testing can be done only after understanding the scenario.
For this, u refer to the integration scenario in ur design. so this shall give u an idea about all the systems involved in integration and how the data flowing is between them and what kind of systems they are?
2. For testdata, you might need of business or functional team as you cannot have any info on the file formats etc(depending on different scenarios invloved like R3, SOAP Databse etc)
these are only general tips. but u can refer to many of the trouble shooting guides already available blogs in sdn for any sought of inputs.But then, SDN is always there.
you can test/monitor ur results in RWB->component monitoring
also in sxmb_moni
thanks
kiran
Edited by: kiran dasari on Mar 17, 2008 4:44 PM

How to test Adapter Module

Hi
My Scenario is File - to - File
I have written one adapter module and i have deployed in J2ee Engine as well. In sender communication channel i have given the JNDI name like
<b>"localejbs/<JNDI Name>"</b>.I have tested the my file to file scenario by placing a file in source directory which i have mentioned in Communication channel Source Directory and File Name.But i didnt find any difference in target file.
I have used the following blog
<b>
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/da5675d1-0301-0010-9584-f6cb18c04805</b>
1.How to test the adapter module.
2.How to configure my communication channel.
Please help me its very urgent
Best Regards
Ravi Shankar B

Hi,
check JNDI service in visual admin to see if
your service has the same name there
>>>>1.How to test the adapter module.
by using it in a channel
>>>>2.How to configure my communication channel.
add you adapter module to the adapter module tab
in communication channel
Regards,
michal

How to copy List item from one list to another using SPD workflow using HTTP call web service

Hi,
How to copy List item from one list to another using SPD workflow using HTTP call web service.
Both the Lists are in different Web applications.
Regards, Shreyas R S

Hi Shreyas,
From your post, it seems that you are using SharePoint 2013 workflow platform in SPD.
If that is the case, we can use Call HTTP web service action to get the item data, but we cannot use Call HTTP web service to create a new item in the list in another web application with these data.
As my test, we would get Unauthorized error when using Call HTTP web service action to create a new item in a list in another web application.
So I recommend to achieve this goal programmatically.
More references:
https://msdn.microsoft.com/en-us/library/office/jj164022.aspx
https://msdn.microsoft.com/en-us/library/office/dn292552.aspx?f=255&MSPPError=-2147217396
Thanks,
Victoria
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

How to Test Mail's Trainable Filter?

In the Apple Support Discussions topic No Junk mailbox in Training mode? a question arose regarding how to test if the trainable filter (the filter that evaluates the "Message is Junk Mail" condition) is evaluated independently of the other conditional tests of the Junk Filter rule -- IOW, if some other test condition in the Junk Filter rule, like sender is not in the address book, evaluates to false, does the "Message is Junk Mail" test which follows it in the rule's list of conditions ever get evaluated?
A proposed test for this involved resending to yourself a message that Mail had previously marked as junk using the "Message > Send Again" function of Mail. It has been pointed out to me that this probably isn't a valid test because "Message > Send Again" doesn't send the original message in unaltered form (there are substantial changes in the header info regarding sender, path, etc.) & thus the filter may not consider the resent message as junk, even if it were to evaluate it.
So, for testing purposes, does anybody have a suggestion about how to resend (or fake resending) a received message to myself without altering its header info?

What matters is whether the Message is Junk
Mail condition would still evaluate to true
regardless.
That depends on what you are trying to determine & if the test produces decisive results.
For instance, consider tests with the standard Junk Filter automatic settings & no other rule involving "Message is Junk Mail" in the list. A test is performed in an attempt to determine if the filter's conditional tests are performed in the indicated order only until one evaluates to false.
"Send Again" should not cause the "Message is Junk Mail" test to be evaluated at all, since in this case the sender is oneself & the Junk Filter should exit as soon as the 'sender not in Address Book' test is evaluated.
Yet, when I try this with a message (correctly) marked as junk when originally received, the resent version is still marked as junk, & this happens not just on my on Mac but on the few others I have checked as well. I have tested with only a limited number of junk messages because on the other Macs the owners do not keep them for long & on my own I do not get that many (AOL is my primary account & has excellent spam filtering), so I would love to know if readers of this topic see similar results.
BTW, I should mention here what might be a potential hazard of using "Redirect" for testing with "real" spam: As I hope everybody knows by now, it is a bad idea to enable automatic loading of remote html images because doing so can alert spammers one's email address is valid. In one case, when I tried the "Redirect" method on my own Mac, AOL refused to accept the redirected message, possibly because of AOL's spam filters. At that point, Mail displayed the message, asking if I wanted to try sending it from another account, edit it, or what. Even though I have the option disabled, Mail loaded the original's remote html images along with its other content. I don't know if that is a design feature of Mail, a problem with just my Mac, particular to AOL, or what, but I want readers to be aware of it, just in case.
Anyway, for this reason I have since confined myself to testing with "Send Again," which seems safe in all cases, & mostly to testing only on my on Mac, just in case it is not.
Back to the "so what" aspects of this topic: It may be that the "Message is Junk Mail" test is sometimes treated differently from the other conditional tests in the Junk Filter in that it may be evaluated first or even if other tests before it evaluate to false. This makes some sense as a design feature in that even if the Junk Filter's automatic mode action isn't performed, it gives users more training opportunities. It may be a bug. It may just be something particular to my Mac. It may be something else, perhaps having to do with trusting junk headers, or something more subtle as yet unconsidered.
In any event, the point is holding all variables save one constant in any single "black box" test of a multi-variable system is a necessity for definitive results because variables may be interdependent. Because of this, the ability to resend to oneself the same message in unaltered form would be useful for a variety of tests, so I would still like to know if anyone has any ideas about how to do this.
iMac G5/2.0 GHz 17" ALS (Rev B) Mac OS X (10.4.7) 512 MB RAM, Kensington Trackball

How to test Process chain in BW

Hi Guys,
Can U give me some introduction to Process chains and how to test it in BW 3.5
Thanks for Ur time.
Cheers
Senthil

Hi,
A process chain is a defined sequence of interdependent processes required to perform acomplex task in an SAPBW environment. Data maintenance tasks in SAPBW are notrestricted to uploading data. Aggregate rollups, index maintenance, master data and ODS activation, and a variety of other jobs are required to update data, guarantee best-possible performance, and maintain data integrity. Typical SAPBW implementa-tions have complex interdependent networks of jobs in place that run every night, week,or month.Previous releases of SAPBW did not provide an integrated solution for scheduling and monitoring those kinds of job networks. This has changed with the introduction of process chains in release 3.0. Process chains allow you to define complex job networks consisting of standard SAPBW jobs, as well as custom jobs; they support visualizing the job network and centrally controlling and monitoring the processes.
(from "Mastering the SAP BIW")
New Features in BI 2004s Process Chains
/people/mallikarjuna.reddy7/blog/2007/02/08/new-features-in-bi-2004s-process-chains
Designing
/people/vishvesh.bahirat/blog/2006/11/29/bw-process-chain-design
Process chain creation in 2004s - step by step
/people/juergen.noe/blog/2008/01/11/process-chain-creation--step-by-step
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/events/sap-teched-03/using%20process%20chains%20in%20sap%20business%20information%20warehouse
Testing
We need to test the PC chains.
You need to test if the extractions are working fine, data is getting loaded into targets, post load activities like activation, rollup, compression etc are successfull etc.
We schedule / trigger the chains and monitor them. We ensure that all the process types are happening successfully.
One major area we concentrate on is to identify dependcies in the chain. This will ensure less erros and also reduce chain timings by a great extend. Dependencies should be kept to a minimum whereever possible.
Also in cases where we use events/third party shceduling tools to trigger BW chains we check that out.
Thanks,
JituK

How to test the connection between DSD backend and DSD connector

Dear all,
I am configuring the MDSD scenario .. and i want to insure that my customization is correct
How to test the connection between DSD Backend and DSD connector ??

Hi Viren,
The problem is:
We have a new BW system. The basis people asked me to check the connection between this BW system and the R/3. There is only one client for now(100). I have logged into 100 and tried executing RSA1 to check the connection, but it gave a message box saying "You can only work in Client 000". Then I have treid logging into 000(just to make sure) and tried executing RSA1. Even here I got a message saying "The SAP BW system must not be operated in client 000". Now, I am not sure of what is wrong in clien 100. I am not sure if I have to do some settings before I access RSA1 or any other BW transaction. Could you please help me in this.
Also, I just checked the RFC destinations in BW. There is a destination created for our R/3 and I have noticed that they have given a remote UserID and password for remote login. I tried to check the Remote UserID in SU01 but there is no userID with that name. Could this be a problem?
Thanks,
RPK.

How to test AV transmission on one PC

Similar Messages

Maybe you are looking for