How to trigger alert Column store unload for reason :unused resource

Good day,
I have an issue with the column store unload.
As for this alert in hana studio, there are 3 reasons for the alert. Reason: Low memory, Explicit, Unused resource.
First one is lack of memory, so the column table is unloaded. Second is because someone unloads a column table by SQL. These two reason we can see easily and they are usually main reasons for this alert. However, i can't trigger the last one.
Is there any good method to trigger it?
I attached some screens files of the workaround.
Any help will be appreciated.
Thank you!
Best regards
Geoffrey Zhang
Message was edited by: Tom Flanagan

Hi Geo
not too sure if the idea for KBAs has changed but in my understanding they were never meant to replace documentation or to provide complete topic overviews.
Given the nature of this alert, it would be weird to
a) get an alert at all for this
b) have someone reacting to it.
The function to unload containers after they haven't been used in a long time is part of the garbage collection in SAP HANA. Why would it be necessary to have an alert for that?
And then what should anyone do about it? What do DBAs usually do, when long unused data gets displaced to disk?
Exactly: nothing
Concerning my remark about SCN usage of SAP employees: I meant that there are plenty of SAP internal forums and communities available where you can probably get less exposure to the rest of the world and might get answers that provide you with more detailed information than what is possible in SCN.
As English is the corporate language and used in SCN as in the internal forums I don't see how that is an obstacle for using the internal forums.
About your unanswered questions: just like any other forum, SCN is based on voluntary contributions. There should be no expectation about how long it takes to get answers.
Nobody is paid to answer the questions here, so it's all on a community basis.
- Lars

Similar Messages

  • How to trigger alerts..

    Hi frendz..
    i have little problem abt "how to trigger alert"
    I have successfully created XI Alerts using ALRTCATDEF. But, it seems, the email is not coming. Do we have to trigger them also? If yes, please provide some document which specifies how to trigger Alerts.
    thanx pankaj..

    For more details have a lok on these
    <b>
    For email alerts</b>
    /people/aravindh.prasanna/blog/2005/12/24/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part-2
    /people/aravindh.prasanna/blog/2006/02/20/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part-3
    /people/sap.user72/blog/2005/01/14/alert-management--improving-monitoring-of-your-landscape
    /people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step
    <b>You have to do SMTP Configuration for EMail and SMS.....</b>
    http://help.sap.com/saphelp_nw04/helpdata/en/af/73563c1e734f0fe10000000a114084/content.htm
    Alerts
    /people/michal.krawczyk2/blog/2005/09/09/xi-alerts--troubleshooting-guide
    /people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-stepCheck out these:
    RWB- Alert Configuration LInk isnot working
    Unable to login into Alert configuration
    Thanks!!

  • How to hide the Columns and Views for Login user in SharePoint 2013

    Hi Friends,
    How to hide the Columns and Views for Login user in SharePoint 2013? Is it possible using OOB features? If not possible how can we hide the Columns and Views for Login user?
    Could you please help on this.
    Thanks,
    Tiru
    Tiru

    Hello Tirupal,
    There is no OOB way to do this.
    Please check this codeplex solution to achieve the same.
    https://sp2013columnpermission.codeplex.com/
    My Blog- http://www.sharepoint-journey.com|
    If a post answers your question, please click Mark As Answer on that post and Vote as Helpful

  • How to trigger Alert with Event Linkage?

    Hi,
    Can any one tell me the process how to trigger alerts with event linkage? I am successul in triggering by calling function module SALRT_CREATE_API.
    my scenario is...
    when a purchase order is cancelled, i have to trigger an alert to the concerned department head throgh Alert Inbox and external mail also.
    Plese guide me..
    Regards,
    Dhanunjaya Reddy

    Hi,
    now i am getting alerts from Event Linkage.
    Here i take the scenario Sales order change.
    BOR object : BUS2032
    Event          : Changed
    Receiver type : <my alert>
    Receiver call  : Function Module
    Receiver Functiona Module : SALRT_CREATE_VIA_EVENT
    Linkage is activated.
    when a sales order is changed receiver function module triggering the alert which is defined in Receiver type. That i am getting in my alert inbox. Upto this.. it is cleared.
    Now the scenario is.. about Alert Container
    in alert container i take element is BOR Object type BUS2032.
    the questions are..
    1. Is it correct to defined BOR object here to get data when Sales order has been changed.
    2. What are the properties i have to take in Properties tab?
    3. How to use alert container parameters in short and long text?
    Here my clear intention is when a sales order is changed.. i have to get the data related to that sales order and it has to show in Alert.

  • How to trigger alerts from UDF for file to file scenario

    Hi,
       My scenario is something like this.......
    I have lookup in which there exists more than one output value corresponding to this one input value.In such cases i need to raise an exception and trigger an alert from UDF so as to inform the functional team.
    Now this entire procedure has to be implemeted for file to file scenario.
    I am not using any RFC nor do i need a BPM.
    Entire scenario should be excuted without BPM and RFC.
    Can anyone kindly suggest me as to how to proceed for this so as to trigger alerts
    from UDF.
    Thanks in advance
    Madhu

    HI,
    Please see the below links
    Triggering XI Alerts from a User Defined Function - /people/bhavesh.kantilal/blog/2006/07/25/triggering-xi-alerts-from-a-user-defined-function
    Alerts with variables from the messages payload (XI) - UPDATED - /people/michal.krawczyk2/blog/2005/03/13/alerts-with-variables-from-the-messages-payload-xi--updated
    /people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step - Alert Configuration
    /people/michal.krawczyk2/blog/2005/09/09/xi-alerts--troubleshooting-guide - Trouble shoot alert config
    Regards
    Chilla

  • How to trigger alert (SALERT_CREATE) from remote R/3 system? Help!

    Hi Experts,
         Here is my business reqmt:
    XI reads inventory file and makes a RFC Function module (YREAD_INVDATA) call to R3 system.
    In R3 system function module I have written business validation logic.
    If any validation fails then I have to trigger alert. The CCMS alert is setup in the XI system. So to trigger alert I am making a RFC call (CALL FUNCTION SALERT_CREATE DESTINATION 'SYXI250'...) to XI.
        In order to make a RFC call can I use TYPE 3 RFC destination?
        Do I need to use TYPE T (TCP/IP) RFC destination?
        If I use TYPE T then I am getting error saying "no sender agreement and no receiver".
        Since I am making a call to function module in XI system and there is no other receiver after that how do I configure a receiver for this?
        Please help me!
    Thanks
    Gopal

    Hi -
    At least for what you're trying to do, consider below:
    <i>>>>The CCMS alert is setup in the XI system. So to trigger alert I am making a RFC call (CALL FUNCTION SALERT_CREATE DESTINATION 'SYXI250'...) to XI.</i>
    So SALERT_CREATE in the XI system is actually your receiver interface in this scenario.
    <i>>>>Do I need to use TYPE T (TCP/IP) RFC destination?</i>
    Yes.
    <i>>>>Since I am making a call to function module in XI system and there is no other receiver after that how do I configure a receiver for this?</i>
    As mentioned above, XI (technically at least) is the receiver and SALERT_CREATE is the receiver interface.  The sender would be your R/3 system and the sender interface would be just a stub of SALERT_CREATE.  So in R/3 you could create a customer, remote-enabled RFC (Z_SALERT_CREATE) that's just a stub (no implementation of SALERT_CREATE, just parameters) and call this from the R/3 side (e.g. CALL FUNCTION Z_SALERT_CREATE DESTINATION 'SYXI250'...).
    Of course, you would need to import the metadata for your custom Z_SALERT_CREATE (and SALERT_CREATE if not already) RFC as an imported object to XI.  You'd need a sender agreement for R/3 sender and Z_SALERT_CREATE RFC as well.
    Regards,
    Jin

  • How to trigger Alerts through Portal

    Hi,
    How to generate alerts from portal and send to users based on some criteria?
    Regards
    Stan

    Any help on this gurus???

  • How to undo the "never store password for this site"?

    A friend did this on my computer on a site where I'm very frequently logging in.
    How can I erase this preference just for this site, i.e. I want Safari to ask me again whether I want my password stored and then answer yes.

    Safari > Preferences > AutoFill > User names and passwords: Edit...

  • How to permit Google play store access for captive portal guest users?

    Introduction : There could be occasions when we need to permit Google play store access for guest users, A common example could be a hotel environment where unauthenticated users are allowed to access the hotel website and directed to Google play store to download their Apps.
    Environment : This article applies to all controller models and AOS versions 6.1.3.x and higher.
    Configuration Steps :
    The Google Play app store (play.google.com) is a cloud service, and the addresses it uses may change regularly. This presents a challenge to permit access to those ranges. The current solution is to permit these addresses that are known to be used by the Android Marketplace, as shown here:
    .ggpht.com
    android.clients.google.com
    play.google.com
    The configuration is about creating an alias with the above URL’s and a firewall policy where you can permit traffic to the alias.
    Step 1: Create an Alias
    (Aruba3200XM) #configure t
    (Aruba3200XM) (config) #netdestination Google-Play
    (Aruba3200XM) (config-dest) #name android.clients.google.com
    (Aruba3200XM) (config-dest) #name *.ggpht.com
    (Aruba3200XM) (config-dest) #name play.google.com  
     Step 2: Create the session-based access list.
    (Aruba3200XM) (config) #ip access-list session google-play
    (Aruba3200XM) (config-sess-google-play)#user alias Google-Play any permit
    Step 3: Assign the session-based access list to the guest captive portal pre-auth user role.
    (Aruba3200XM) (config) #user-role guest-logon
    (Aruba3200XM) (config-role) #session-acl google-play position 3
    Verification :
    (Aruba3200XM) #show netdestination
    Name: Google-Play
    Position  Type  IP addr   Mask-Len/Range
    1         name  0.0.0.1   android.clients.google.com
    2         name  0.0.0.2   *.ggpht.com
    3         name  0.0.0.3   play.google.com
    (Aruba3200) #show rights guest-logon
    Derived Role = 'guest-logon'
     Up BW:No Limit   Down BW:No Limit
     L2TP Pool = default-l2tp-pool
     PPTP Pool = default-pptp-pool
     Periodic reauthentication: Disabled
     ACL Number = 6/0
     Max Sessions = 65535
     Captive Portal profile = default
    access-list List
    Position  Name              Type     Location
    1         ra-guard          session
    2         logon-control     session
    3         google-play       session
    4         captiveportal     session
    5         v6-logon-control  session
    6         captiveportal6    session
    google-play
    Priority  Source  Destination  Service  Action  TimeRange  Log  Expired  Queue  TOS  8021P  Blacklist  Mirror  DisScan  ClassifyMedia  IPv4/6
    1         user    Google-Play  any      permit                           Low                                                           4
    Troubleshooting :
    Make sure ip name-server, ip domain-name and ip domain lookup are configured on the controller.
    Also you must have a PEFNG license to configure or view a destination.

    Thanks so much getting these names listed out. I have been working on this very issue for a few weeks and was basing my firewall rules on IP's. It was not going well. Now access is working and testing can commence!  Thanks,Chris

  • How to make an iTunes store account for my child to use in the UK without a credit card

    I want to give my child an iTunes store/Mac App Store account here in the United Kingdom but cannot proceed without entering a credit card section that asks for details. There was not an option for "NONE" in that screen. My child has a gift card, and she wants to use it, of course, and I will allow purchases to be made in this way.
    I was following the instructions in a web browser screen (create an account on a computer http://support.apple.com/kb/HT2534) and I could not find that free app that I had to download from the iTunes App section. When following these instructions, they stated to "To find a free application, navigate to the Top Charts column on the right side of the App Store window. Scroll down until you see the list of Free Apps. Select any application by clicking on it. Then, click Free App underneath the application icon. " (Step3).
    The app is like a blue play button with a black triangle in it. I could not find this app. The instuction in Step 3 did state it was important, but I just could not find the app. The reason that I could not find it was there was no "Top Charts" column to be found. So I was unable to complete Step 3.
    Being unable to complete Step 3 properly, I had to try another plan. So I tried to create an Apple ID on my own steam, by signing out of my own Apple ID and to create another one.
    I continued to follow the instructions without problems, until I reached Step 11. Then, there was no option for "NONE" as in payment type. I could not think of an alternative, but to abort that screen and click CANCEL.
    Can anybody help me in this ? Either how to get hold of that app from the iTunes Store App section. Or an alternative way to create a new Apple ID with an option to make purchases with just the redeeming of gift cards for the iTunes Store, so that my child can sign in by herself without me having to be there.
    I have iTunes 10, and Mountain Lion on the Mac.
    Regards from John5801

    Cocerning the free app (blue play button with (black) triangle): Did you mean 'remote'?
    http://www.apple.com/apps/remote/
    Furthermore: I use clickandbuy for the iTunes store so that I don't need a credit card.
    But since i'm in Germany, I'm not sure what to do in the country you are in.
    You could also take a look at this, altough I don't know if thie is still up to date:
    http://lifehacker.com/5798047/create-an-apple-id-in-itunes-account-without-a-cre dit-card

  • How to trigger alert in XI from a connected SAP R/3 4.7 system

    Hi,
    I have an asynchronous scenerio JDBC -> XI -> SAP R/3 interface.
    How can I trigger an alert when the interface fails in the SAP system ?
    BR,
    Vijay

    Hi Vijay,
    First , to create Alerts, Alert Rule, just check this blog,
    /people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step
    It will help you in doing your entire Alert Configuration.
    Next,from SP14 onwards, activation of end to end monitoring is not needed for Alerting. Refer to this note 870232 for this info.
    Next, to test if your Alerts have been defined correctly, go to SE38. In the program , type RSALERTTEST and then click on EXECUTE button ( F8 ). In the next window, it will ask you for your ALERTCATEGORY. Just give the name of your ALERT CATEGORY and click EXECUTE.
    If you have configured your alerts correctly, you will receive a message that tells ALERT IS GENERATED and will give the ALERT ID.
    Now, go to your Run TIme workbench and then select ALERT INBOX and see if you have got the ALERT message in your ALERT INBOX.
    If this is working fine, then the last step, implement the note 913858.
    If you are below SP14, also check this blog,
    /people/michal.krawczyk2/blog/2005/09/09/xi-alerts--troubleshooting-guide
    Regards,
    Bhavesh
    PS do mark points for useful answers

  • How to import the column short description for Datastore in ODI

    Hi
    I am loading AS400/DB2 table in to oracle db staging tables. These AS400 table has 70 to 80 columns each with short description. Using common format designer I am able to get the DDL for the oracle db so that I do not have manually type in the table definition.
    1. But how do I get the each column short description into Datastore?
    2. In oracle Datastore where does the COLUMN Comments appear?
    Thanks
    obieefan

    in snp_table->table_desc column
    comments cannot be reversed when using standard reverse.
    for db2 400, I suppose you can use "RKM DB2 400", i can see it reverse table comment as below
    select     DBXLFI     TABLE_NAME,
         DBXLFI     RES_NAME, /* DBXFIL for system name */
         case
              when      LOCATE('<%=snpRef.getModel("REV_ALIAS_LTRIM")%>' ,DBXLFI) <> 0
              then      SUBSTR( DBXLFI , LOCATE('<%=snpRef.getModel("REV_ALIAS_LTRIM")%>' ,DBXLFI) + CHAR_LENGTH('<%=snpRef.getModel("REV_ALIAS_LTRIM")%>') )
              else      SUBSTR(DBXLFI , 1 , 4)
         end     TABLE_ALIAS,
         case DBXATR
              when 'PF' then 'T'
              when 'TB' then 'T'
              when 'VW' then 'V'
         end     TABLE_TYPE,
         Trim(Substr( IfNull(Trim( Both From DBXTXT ), ' ')||' '||Ifnull(DBXREM, ' ') , 1 , 250)) TABLE_DESC,
         0     R_COUNT
    from      QSYS.QADBXREF
    where     DBXLIB     = '<%=snpRef.getModel("SCHEMA_NAME")%>'
    and     DBXLFI     like '<%=snpRef.getModel("REV_OBJ_PATT")%>'
    and     DBXATR     in ('PF' , 'TB' , 'VW')

  • How to change Mac App Store Login for Updating Apps

    I purchased a used Macbook from a local computer retailer; when they installed Mavericks and setup the account they used their Mac ID. Now it's showing updates for Keynote, Numbers, Pages, and iMovie but if I choose Update it prompts their username and wont let me change it. I assume those apps are connected to that account so it wont let me update. Is there a way to change the associated login to mine or is it safe for me to remove them and reinstall using my ID? I wasn't sure if they were core apps that would cause any damage if removed and I really dont want to format and start over. Thanks for the help!

    The first thing to do with a second-hand computer is to erase the internal drive and install a clean copy of OS X. You—not the original owner—must do that. How you do it depends on the model, and on whether you already own another Mac. If you're not sure of the model, enter the serial number on this page. Then find the model on this page to see what OS version was originally installed.
    It is not safe to use a computer with software installed by a previous owner.
    1a. If you don't own another Mac
    If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc from the Apple Store or a reputable reseller—not from eBay or anything of the kind. If the machine has less than 1 GB of memory, you'll need to add more in order to install 10.6. Preferably, install as much memory as it can take, according to the technical specifications.
    If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for some MacBook Air models. For early MBA models, you may need a USB optical drive or Remote Disc. You should have received the media from the original owner, but if you didn't, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
    To start up from an optical disc or a flash drive, insert it, then restart the computer and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
    If the machine shipped with OS X 10.7 or later, you don't need media. It should start up in Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
    Some models shipped with OS X 10.6 and received a firmware update after 10.7 was released, enabling them to use Internet Recovery. If you have one of those models, you may not be able to reinstall 10.6 even from the original discs, and Internet Recovery may not work either without the original owner's Apple ID. In that case, contact Apple Support, or take the machine to an Apple Store or another authorized service provider to have the OS installed.
    1b. If you do own another Mac
    If you already own another Mac that was upgraded in the App Store to the version of OS X that you want to install, and if the new Mac is compatible with it, then you can install it. Use Recovery Disk Assistant to prepare a USB device, then start up the new Mac from it by holding down the C key at the startup chime. Alternatively, if you have a Time Machine backup of OS X 10.7.3 or later on an external hard drive (not a Time Capsule or other network device), you can start from that by holding down the option key and selecting it from the row of icons that appears. Note that if your other Mac was never upgraded in the App Store, you can't use this method.
    2. Partition and install OS X
    If you see a lock screen when trying to start up from installation media or in Recovery mode, then a firmware password was set by the previous owner, or the machine was remotely locked via iCloud. You'll either have to contact the owner or take the machine to an Apple Store or another service provider to be unlocked. You may be asked for proof of ownership.
    Launch Disk Utility and select the icon of the internal drive—not any of the volume icons nested beneath it. In thePartition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive.
    After partitioning, quit Disk Utility and run the OS X Installer. If you're installing a version of OS X acquired from the App Store, you will need the Apple ID and password that you used. When the installation is done, the system will automatically restart into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
    Then run Software Update and install all available system updates from Apple. To upgrade to a major version of OS X newer than 10.6, get it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the original owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed—you have to repurchase them.
    3. Other issues
    If the original owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're irrevocably linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Mac App Store Customer Service has sometimes issued redemption codes for these apps to second owners who asked.
    If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able to  authorize it immediately under your ID. In that case, you'll either have to wait up to 90 days or contact iTunes Support.
    When trying to create a new iCloud account, you might get a failure message: "Account limit reached." Apple imposes a lifetime limit of three iCloud account setups per device. Erasing the device does not reset the limit. You can still use an account that was created on another device, but you won't be able to create a new one. Contact iCloud Support for more information.

  • How to trigger Alert on Adapter errors

    Hi,
    can someone suggest solutions to trap errors encountered in the adapters ?
    Consider a simple situation of a file adapter reading a simple file. In case the file adapter encounters parsing errors, the message is never sent to the XI Server, and never displayed in the XI monitor. We can see this error in the RWB though.
    Ideally, we would like to capture and raise an alert at a central place such as CCMS on encountering such error conditions. Your suggestions are welcome.

    You need to enable Enabling Network Adapter State monitoringhttp://systemcenterdynamics.wordpress.com/2007/12/29/enabling-network-adapter-state-monitoring/
    Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
    Mai Ali | My blog: Technical | Twitter:
    Mai Ali

  • How to trigger Alert from Mapping without BPM ?

    Hi @ ,
    I have to throw an alert in case of my mandatory source field is missing .
    The requirement is to chk whether a particular field is present in the source structure if itisn't present then throw alert in alert inbox.I can throw exception but the reuirement is alert so ai m struck
    urgent help is required
    Regards,

    Hi Bhavesh,
    We had this similar discussion where the issue was to throw exception and it was resolved .
    Now craeting alert is coming to be a different issue
    Thanks again I ddnt chk the current blog of yrs
    Regards

Maybe you are looking for