How to upload a text in the customer master?
hiall,
in vd02 u go to extras->texts.
Now I have to upload a text there..
so i passed the text objetct-knvv
name-kunnrvkorgvtweg+spart
id-the rewuired agains which i have to upload
lang-en
i used fm save_text in badi method read_add_on_data in prog sapmvf02d.
though the fm is working but when i am executing vd02 again the text is not appearing in vd02..Can u help me with this..
Hi,
Upload Program for Xk01 ..
REPORT Y730_BDC5 .
DATA : BEGIN OF IT_DUMMY OCCURS 0,
DUMMY(100) TYPE C,
END OF IT_DUMMY.
DATA : BEGIN OF IT_XK01 OCCURS 0,
LIFNR(10) TYPE C,
BUKRS(4) TYPE C,
EKORG(4) TYPE C,
KTOKK(4) TYPE C,
NAME1(30) TYPE C,
SORTL(10) TYPE C,
LAND1(3) TYPE C,
SPRAS(2) TYPE C,
AKONT(6) TYPE C,
FDGRV(2) TYPE C,
WAERS(3) TYPE C,
END OF IT_XK01,
BEGIN OF IT_BANK OCCURS 0,
BANKS(3) TYPE C,
BANKL(10) TYPE C,
BANKN(10) TYPE C,
KOINH(30) TYPE C,
LIFNR(10) TYPE C,
END OF IT_BANK.
DATA : IT_BDCDATA LIKE BDCDATA OCCURS 0 WITH HEADER LINE,
IT_BDCMSGCOLL LIKE BDCMSGCOLL OCCURS 0 WITH HEADER LINE.
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
FILENAME = 'C:\VENDOR.TXT'
FILETYPE = 'ASC'
TABLES
DATA_TAB = IT_DUMMY.
LOOP AT IT_DUMMY.
IF IT_DUMMY-DUMMY+0(2) = '11'.
IT_XK01-LIFNR = IT_DUMMY-DUMMY+2(10).
IT_XK01-BUKRS = IT_DUMMY-DUMMY+12(4).
IT_XK01-EKORG = IT_DUMMY-DUMMY+16(4).
IT_XK01-KTOKK = IT_DUMMY-DUMMY+20(4).
IT_XK01-NAME1 = IT_DUMMY-DUMMY+24(30).
IT_XK01-SORTL = IT_DUMMY-DUMMY+54(10).
IT_XK01-LAND1 = IT_DUMMY-DUMMY+64(3).
IT_XK01-SPRAS = IT_DUMMY-DUMMY+67(2).
IT_XK01-AKONT = IT_DUMMY-DUMMY+69(6).
IT_XK01-FDGRV = IT_DUMMY-DUMMY+75(2).
IT_XK01-WAERS = IT_DUMMY-DUMMY+77(3).
APPEND IT_XK01.
ELSE.
IT_BANK-BANKS = IT_DUMMY-DUMMY+2(3).
IT_BANK-BANKL = IT_DUMMY-DUMMY+5(10).
IT_BANK-BANKN = IT_DUMMY-DUMMY+15(10).
IT_BANK-KOINH = IT_DUMMY-DUMMY+25(30).
IT_BANK-LIFNR = IT_DUMMY-DUMMY+55(10).
APPEND IT_BANK.
ENDIF.
ENDLOOP.
LOOP AT IT_XK01.
REFRESH IT_BDCDATA.
perform bdc_dynpro using 'SAPMF02K' '0100'.
perform bdc_field using 'BDC_CURSOR'
'RF02K-REF_LIFNR'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'RF02K-LIFNR'
IT_XK01-LIFNR.
perform bdc_field using 'RF02K-BUKRS'
IT_XK01-BUKRS.
perform bdc_field using 'RF02K-EKORG'
IT_XK01-EKORG.
perform bdc_field using 'RF02K-KTOKK'
IT_XK01-KTOKK.
perform bdc_dynpro using 'SAPMF02K' '0110'.
perform bdc_field using 'BDC_CURSOR'
'LFA1-TELX1'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'LFA1-NAME1'
IT_XK01-NAME1.
perform bdc_field using 'LFA1-SORTL'
IT_XK01-SORTL.
perform bdc_field using 'LFA1-LAND1'
IT_XK01-LAND1.
perform bdc_field using 'LFA1-SPRAS'
IT_XK01-SPRAS.
perform bdc_dynpro using 'SAPMF02K' '0120'.
perform bdc_field using 'BDC_CURSOR'
'LFA1-KUNNR'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_dynpro using 'SAPMF02K' '0130'.
perform bdc_field using 'BDC_CURSOR'
'LFBK-KOINH(02)'.
perform bdc_field using 'BDC_OKCODE'
'=ENTR'.
DATA : FNAM(20) TYPE C,
IDX TYPE C.
MOVE 1 TO IDX.
LOOP AT IT_BANK WHERE LIFNR = IT_XK01-LIFNR.
CONCATENATE 'LFBK-BANKS(' IDX ')' INTO FNAM.
perform bdc_field using FNAM
IT_BANK-BANKS.
CONCATENATE 'LFBK-BANKL(' IDX ')' INTO FNAM.
perform bdc_field using FNAM
IT_BANK-BANKL.
CONCATENATE 'LFBK-BANKN(' IDX ')' INTO FNAM.
perform bdc_field using FNAM
IT_BANK-BANKN.
CONCATENATE 'LFBK-KOINH(' IDX ')' INTO FNAM.
perform bdc_field using FNAM
IT_BANK-KOINH.
IDX = IDX + 1.
ENDLOOP.
perform bdc_dynpro using 'SAPMF02K' '0130'.
perform bdc_field using 'BDC_CURSOR'
'LFBK-BANKS(01)'.
perform bdc_field using 'BDC_OKCODE'
'=ENTR'.
perform bdc_dynpro using 'SAPMF02K' '0210'.
perform bdc_field using 'BDC_CURSOR'
'LFB1-FDGRV'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'LFB1-AKONT'
IT_XK01-AKONT.
perform bdc_field using 'LFB1-FDGRV'
IT_XK01-FDGRV.
perform bdc_dynpro using 'SAPMF02K' '0215'.
perform bdc_field using 'BDC_CURSOR'
'LFB1-ZTERM'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_dynpro using 'SAPMF02K' '0220'.
perform bdc_field using 'BDC_CURSOR'
'LFB5-MAHNA'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_dynpro using 'SAPMF02K' '0310'.
perform bdc_field using 'BDC_CURSOR'
'LFM1-WAERS'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'LFM1-WAERS'
IT_XK01-WAERS.
perform bdc_dynpro using 'SAPMF02K' '0320'.
perform bdc_field using 'BDC_CURSOR'
'WYT3-PARVW(01)'.
perform bdc_field using 'BDC_OKCODE'
'=ENTR'.
perform bdc_dynpro using 'SAPLSPO1' '0300'.
perform bdc_field using 'BDC_OKCODE'
'=YES'.
CALL TRANSACTION 'XK01' USING IT_BDCDATA
MODE 'A'
UPDATE 'S'
MESSAGES INTO IT_BDCMSGCOLL.
ENDLOOP.
FORM BDC_DYNPRO USING PROG SCR.
CLEAR IT_BDCDATA.
IT_BDCDATA-PROGRAM = PROG.
IT_BDCDATA-DYNPRO = SCR.
IT_BDCDATA-DYNBEGIN = 'X'.
APPEND IT_BDCDATA.
ENDFORM.
FORM BDC_FIELD USING FNAM FVAL.
CLEAR IT_BDCDATA.
IT_BDCDATA-FNAM = FNAM.
IT_BDCDATA-FVAL = FVAL.
APPEND IT_BDCDATA.
ENDFORM.
Regards
Similar Messages
-
How to Copy Sales Text Data from Customer Master to Sales Order.
Hi SAP Guru's
I have Completed Configuration for Central Text for Customer Master for two texts 1)Additional Attachments 2) Wooden Packing
I got these two fields in Customer Master.
I need these data to be copied from Customer Master to sales order. But i am unable get these two in to sales order.
Steps which I have done for Text Determination.
1) Text Id in for Text Object KNA1
2)Placed Text Id in Text Procedure and assigned this procedure to Customer Account Group.
Could you please advice me
Thanks in Advance.Text Control
In this IMG activity, you define the rules for text determination. You must carry out the following steps:
Select a text object and define the rules for text determination for this object. Text objects are, for example, the sales texts in the customer master record or the sales document header.
Define the permitted text types for every text object. If the text types contained in the standard SAP R/3 System are not sufficient, create new ones.
Define the access sequences. This way, you define how the SAP System should determine the texts for a text type.
Group the text types together in text determination procedures. The SAP System then proposes the text types from the procedure when you maintain a customer master record or a sales & distribution document. The search for the respective text is carried out using the access sequence which you have stored for each text type in the procedure.
Allocate the text determination procedures so that a procedure applies to the following criteria in each case:
account group customer
sales & distribution document type
item category -
Custom program to download texts from the Customer master
Hi team,
I want to create a Functional specification for downloading texts from the Customer master.
Means we are trying to come up with a Zprogram development so that this program can be used later to download texts from the customer master.
Can any one advice me what are the steps to do this....and what procedure be followed to finish this task
Kindly advice from the Functional aspect
Regards,
saprules.Yes indeed.
This mass download functionality would be very interesting to share.
Thanks a lot!
Best regards,
Roel -
Text copy from customer master to Sales order and invoice
Dear friends,
when i maintain the text in the customer master ther needs to copy to sales order and from sales order to invoice.
Can you please guide me how to do this config
Thanks
Raju.Dear Raju,
First you need to do the Text determination for all areas(i.e Customer Sales and distribution,Sales order header,delivery header and billing header) through VOTXN transaction.
-->Create the Customer text ID under Object KNVV
Maintain the text for Text ID in the customer master >sales area data>Extras-> Text
To copy the customer text to the sales order you need to keep KNVV table as Text object in the sales order text access sequence for the text ID.
If you want to copy the sales order header text to the invoice header first you need to copy the sales order header text to the delivery header from delivery you can copy to invoice.
When you want to copy the Text from Sales order to delivery the Access sequence will place a role
If you want to copy the sales order text to the delivery document The Text Object should be VBBK in the delivery Header Text determination access sequence for that Text ID
Again you can copy the text from delivery to Billing document through checking the Delivery Text field in the billing document detail screen (Top most bottom of the screen).
Go to VOFA transaction select your billing document type then go in to the details here you can find the Delivery Text field you just check that check box.
Now system will copy the sales order header text to the delivery header then it will copy to the invoice header.
I hope this will help you,
Regards,
Murali. -
How to upload a text file from a shared folder and provide an o/p
how to upload a text file from a shared folder and provide an o/p containing the details in each order in the text file
Hi,
Use <b>GUI_UPLOAD</b> to upload a text file from a shared folder.
Use <b>GUI_DOWNLOAD</b> to download data in a file on the presentation server or use <b>OPEN DATASET, TRANSFER</b> and <b>CLOSE DATASET</b> statements to download data to the application server.
Now, I hope the code for data fetching, if required, is already present in the report.
Reward points if the answer is helpful.
Regards,
Mukul -
Upload of purchase order text in the material master
Now we have information of Purchase order text for all the material.
Is it possible to upload the Purchase order text using LSMW.
Some friends were telling that LSMW is not possible for Purchase Order text.
Can anyone suggest how I can upload this purchase order text for all 1000
material using LSMW program.
/if not LSMW is there any other method to upload it
thanks in advance
deepak.s.gouraDear Deepak,
there is standard direct upload i believe
go to lsmw
Execute 1st option
then inLSMW:Object Attribute screen
in standard batch/ direct input
firsr radio button
select object 005
and method 003
Program name RSTXLITF.
Then go by normal process i.e source field , field mapping...
In this way u can also upload Text in the Material master.
Rewards if helpful
Regards
Sanjay L -
How to upload PO text of material master ?
dear gurus,
how to upload PO text in material master in mass , can i use LSMW or BDC ? if yes then how?
I have done the recording but LSMW is not working for PO text.
Upesh khairnar.Hi!
try using Purchasing Inforecord for this. in here you maintain master data linkage for Material Master and Vendor Master. You will just have to input the Material Number, the Vendor Account, and the Purchasing Org. In here you can maintain the PO text defaulted per Material Number. After the maintenance of Inforecord, the PO text will be reflected on the PO document.
Here is the ff Transaction Code:
- ME11 (Create Inforecord)
- ME12 (Change Inforecord)
- ME13 (Display Inforecord)
Hope this helps, Thank you.
Mik -
Text Data Value of the Customer Master
Dear All,
I have created a new text types for the customer as Z001 and Z004.
But now i want to create report with the customer and value maintain in those text fields. I'm little confuse how take the values. I know i have to go to the table STXH but i cant see the text value which i have entered under the text field.
Please help me to solve the above.
Thank U
YasangaDear Yasanga,
As suggested by SAP2000, the usual method to read text is by using the function module 'read_text'
you have to give the text id/ object/ language etc and system will give the text assigned to the customer master.
If there is any trouble, please revert back.
Thanks & Regards,
Hegal K Charles -
I am unable to upload the customer master data using BAPI.?
Hi Guru's,
i am unable to upload the customer master data using BAPI.(BAPI_CUSTOMER_CREATEFROMDATA1)
Please guide me how upload the data...
Thanks in iadvance
Srinivas...Hello Srinivas
This BAPI does not allow to create a new customer from scratch but only to copy an existing customer to a new one and change its address data.
The reference customer has to be provided using IMPORTING parameter PI_COPYREFERENCE. See also the BAPI documentation for more details.
The BAPI does the same like transaction XD01 with Reference.
Regards
Uwe -
How Do I Wrap Text Like the iOS Camera App?
Hello. I am in yearbook, and I have been challenged with designing the cover of the yearbook, and I have been having a few problems along the way. One of these problems is to wrap text. Specifically, I'm stuck on how I would wrap text like the iOS camera app on the bottom of the screen. The words seem like they are wrap around a 3D object to give it that effect, but I can't really tell. If anyone can help me, it would be greatly appreciated.
JJMack wrote:
There is a big difference between being a casual user than real work or development. I own a iPod its a great MP3 player and a device I can display my pictures on out of my pocket. I'll even Facetime my kids at time to see my grand kids or help fix something. My wife has a mini iPad for quick internet access and quire music and uses her iPod to entertain our two year old grandson with games. She uses a Canon 1D mark 4 and I a Cannon 1D mark II. The only use the iPad and iPod cameras get is Facetime. No iOS apps are use to work on images they have no value when you have Photoshop. The iPod is better for displaying image then the iPad mini it has a 3:2 aspect ratio display and travels better the the mini iPad which has a 4:3 aspect ratio display. I also crop image for display on wall mounted HDTV. The iPad is better for casual internet access then the iPod. All our kids have iPhones and they all use computers either Mac or PC for work and internet access. When you have a Unix or Windows why would you want to touch an iOS device for work or serious internet access. Apple mobile devices are convenient for casual use and grand kids don't get that dirty finger painting on them as they do using real paint. Nothing of real value is maintained on an iOS device.
Well...there's Photoshop Touch and Photoshop Mix as well as Lightroom Mobile. It could be argued that they're don't exactly mirror their desktop cousins, yes, but they weren't meant to be. They were meant as extensions to the desktop experience. (e.g., Lightroom Mobile lets one work with the RAW images they have in their Lightroom desktop collections.)
The more powerful Windows tablets can run Photoshop desktop (like Photoshop CC) too.
@bluebocat: Are you looking for text with a perspective? Like it has a vanishing point? As if it was turned in a certain direction in 3D space? -
Report to fetch the text information from customer master sales data
Dear Experts,
We have come up with a requirement where the business want a report/list of the customers for whom a particular text is not maintained in customer master -sales data.
There are many Z text id are configured and are maintained in Sales data- extras- text. In addition, business also need some key fields from the customer master such as name, city, delv plant, payment terms, sales off, sales grp etc.
I could not get any standard table where the text is maintained with the customer numbers. Table STXH can give the customer numbers for a particular text id type but what is maintained against the given text id is not fetched from the table.
So we need the valuable inputs to realize the requirement.
As an proposal, we are aiming to develop custom Z report with the FM READ_TEXT to get the text information with the customer no ( object type KNVV and text id ). But for the additional information, what should be the actual logic for fetching the data. say if this FM is used, what should be the sequence of the logic and ideal selection parameters.
In addition, we aim to use BAPI BAPI_CUSTOMER_GETDETAIL2 to fetch some of the customer ifnormation but many fields are not found in this . can we use some other bapi which can provide the complete general/sales data of customer ( delv plant, sales off, sales grp, custo grp, incoterms, payment terms etc)
Kindly suggest accordingly.
Many thanks in advance.Hi Dharmendra Kumar,
I guess the best would be to check in ABAP General forum on the READ_TEXT sequence/ logic etc..
For customer details, the available BAPIs are:
BAPI_CUSTOMER_GETDETAIL
BAPI_CUSTOMER_GETDETAIL1
BAPI_CUSTOMER_GETDETAIL2
However, you might have to check classes in SE24 to find any existing classes and its method yo give you all the information of a customer. Also check this thread: [BAPI for customer details like in IDoc DEBMAS;
Regards,
Raghu. -
How to rotate a text in the adobe reader for mobile ios ?
how to rotate a text in the adobe reader for mobile ios ?
There's no rotate command to rotate the document. Instead, rotate the iPad. If it doesn't rotate, turn off the Rotation Lock switch on the side of your iPad.
-
How to upload a text in .pdf to convert it?
How to upload a text in .pdf to convert it?
How to upload a text in .pdf to convert it?
-
How to attach a text in the center of the Ellipse using JXML ?
How to attach a text in the center of the Ellipse using JXML ? Can we use labelFor="$topEllipse" ?
<StackPane fx:controller="myfxml.ArchiveLogsController" id="Login" xmlns:fx="http://javafx.com/fxml">
<children>
<AnchorPane>
<!-- Prevent AnchorPane so that it's max = pref. This causes it to center in StackPane -->
<maxWidth><Double fx:value="-Infinity"/></maxWidth>
<maxHeight><Double fx:value="-Infinity"/></maxHeight>
<children>
<Ellipse fx:id="topEllipse" centerX="100" centerY="100" radiusX="50" radiusY="10" strokeWidth="2" stroke="#FF0000" style="-fx-fill: linear-gradient(to right, white 0%, red 100%);"/>
*<Label fx:id="ArchLogs_lb" text="My Ellipse Label" />*
</children>
<properties>
<backgroundColor>
<Color blue="1.0" green="1.0" red="1.0" />
</backgroundColor>
<elementLockSel>
<Boolean fx:value="true" />
</elementLockSel>
</properties>
</AnchorPane>
</children>
</StackPane>I'd suggest putting the Ellipse and the Label in a StackPane.
I wonder why so many people call it JXML?
It is so strange - I guess the JXML name just seems more natural to some people, though I don't know why.
I think Greg is right and that labelFor is not what you want:
http://docs.oracle.com/javafx/2.0/api/javafx/scene/control/Label.html
"Labels also are useful in that they can have mnemonics which, if used, will send focus to the Control listed as the target of the labelFor property . . . A Label can act as a label for a different Control or Node. This is used for Mnemonics and Accelerator parsing. This allows setting of the target Node." -
How to define ABC class field in the Customer Master Sales tab
HI All,
can any one let me know how to define the new ABC class in the Customer Master Sales tab like below.
u2013 A (> 6,000,000 )
u2013 B (> 1,000,000u20136,000,000 )
u2013 C (> 100,000u20132,000,000 )
u2013 D (< 100,000 )
can any one let me know how to define and path in IMG.
Thanks in advance.
kumar reddy.In my opinion, you don't have any such std table/view to update ABC Classification field. You might need to update relevant infostructure based on your requirement, such as sales, invoiced, etc..
Try with following, based on your requirement:
MC(A
SIS: Customer,Inc.Orders - Selection
MC+A
SIS: Customer Returns, Selection
MC+E
SIS: Customer, Sales - Selection
MC+I
SIS: Customer Credit Memos - Selec.
Regards
JP
Maybe you are looking for
-
HI, In my query I had a User entry Variable (Multiple Single Values) on 0DEPARTMENT. I had give a list of 2000 departments in a excel file. When I execute a query in WEB (7X Template) my requirement is to create a Variant so that if selected all the
-
Hi, I bought a MacBook Pro 17'' 2.33GHz Intel Core 2 Duo and I would like to know if it is possible to mgrate only the playlist that I have created on my iMac G5, or eventualy, only iTunes data & settings. I still don't have a firewire cable, I'm goi
-
Firewire to USB or Thunderbolt cable
Need to get an adapter to bring video from firewire to USB or thunderbolt. Suggestions?
-
How to Destroy PDFs generated thru Interactive Form ELement
Hello Friends My team has figured out that constructing pdfs through Interactive Form Element in Netweaver is a big performance issue We need to destroy those pdfs generated , So please help us out with this thanks a lot
-
I wanted to know if there was any software out there which could check my system for malware, viruses, or similar stuff. I'm not even sure if this is necessary but lately Safari and Preview have been randomly crashing. If I re-install Tiger would tha