How to upload widescreen SD to Youtube and save widescreen format ??

I've tried several different export settings in iMovie and uploaded them to Youtube; each time it's appearing with the letterboxing (i.e. the video is horizontally squished with the black side boxes). I have VisualHub that I use as well, but have just been fiddling with the export settings in iMovie.
Thanks in advance. PM

I just Googled the specs and it appears this camera shoots SD Mpeg2 at a low data rate.
I'm surprised it's working at all.
Try a test clip using Streamclip>Export to Quicktime to convert the footage to the specs of an an FCE Easy Setup. It might as well be an Anamorphic DV choice.
The converted clip with titles should hold up OK normally.
Al

Similar Messages

How to upload Training history in Training and event management .

Hi,
How to upload Training history in Training and event management through which transaction.plz reply at early.

Hi,
You can create LSMWs to
1. create event PV10/PV11
2. Firmly book event PV12 (else can directly create firmly booked events)
3. Book attendee PV00
4. Follow up PV15 ( u can use n LSMW here provided all the emps get same level of proficiency after attendin n event. u wont be able to chnge proficiency level at the time of follow up usin LSMW)
Regards,
Shreyasi.

How to Upload Closing balances of ECS and SHECS

Hi Experts ,
Please let me know how to upload closing balances of Education cess and Higher Secondary Education cess of Excise duties
Thanks in advance
GMR

hi
Through Table J2_IACCBAL (OPENING/CLOSING ACC.BALANCE TABLE)

How to upload pdf file in iphone and how to view

how to upload and how to view pdf file in iphone 5s

Hey saif.antri,
You can view PDFs and more using iBooks on your iPhone:
iBooks: Viewing, syncing, saving, and printing PDFs on iPhone, iPad, and iPod touch
http://support.apple.com/kb/HT4227
Have a great day,
Delgadoh

How to upload images to a DB and then view them in the site?

Hi
I have a form, and i want it to insert some data on a DB, so
that the site can display that information. But i'm not able to
upload images or files, because dreamweaver does not have a file
upload option.
I'm using PHP, can anyone help me on how to upload a image
and display it on the web site?

> I don't think its possible to store files in a
> database.
It is. But it's not a great way to do things.
> store it's path in the DB
Actually, what you want to store in the DB is the filename
only. Put the
path into the HTML. That way you don't have to change every
record when you
rename a folder.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"IndioDoido" <[email protected]> wrote in
message
news:e1rdmu$819$[email protected]..
> Hi there!
>
> I don't want to upload a image to a DB...i want to
upload it to a folder
> but
> store it's path in the DB. I don't think its possible to
store files in a
> database.
> After the upload i want to display the image on the
page, with its name
> and
> discription, in other words, with the information
uploaded from the web
> form
> created with dreamweaver record insertion form.
>

I created a 23 minute slideshow with music. how can I share it? youtube and smugmug both say it is too large?

I created a 23 minute slideshow with music of family vacation. Youtube and smugmug both said it was too large to post for my family.
suggetions please?? I use to use Mobileme...

A few different ways about this. You could split the slide show into smaller sections that are withi the limits for posting and then post each section.
You could try a different encoding to make the file smaller. What settings did you use when you created and exported the slide show?

How can I use Automator to open and save Word docs with links?

Hi-
I'm having trouble building a Workflow to open and save Word docs with links.
My Workflow so far:
1. Get Finder items
2. Copy Finder items (to new folder)
3. Rename selected items
4. Open selected items (Word docs)
Three problems occur.
The first is a Word 2004 problem -- I can't get the warning "This document has links in it; do you want to open it with/without updating the links" to go away (Unilke the Macro warning toggle capability, there is nothing in the Preferences for Word 2004 that addresses the links warning, as far as I can tell; any insight you can shed on this would be terrific.)
The second problem happens with Automator: if I manually accept the update of the first document's links, Automator opens that document but then halts completely, even though I've instructed it to open multiple documents.
The third problem I have is that there's no Finder action in Automator that allows me to save the document that's now open (as far as I can see).
Any suggestions for how to fix? If I can get this to work, and scheduled in iCal, it will be an unbelievable time saver.
Thanks,
Jeremy
PowerPC G5 Mac OS X (10.4.6)

Hi there Jeremy,
to do this you are going to have to add in some Run AppleScript steps...
These will rely on GUI Scripting. So first you need to activate GUI Scripting.
Now we need to add in a Run AppleScript action to the end of your workflow...
This will replace your current number 4 in the workflow (Open Selected...)
click here to open this script in your editor<pre style="font-family: 'Monaco', 'Courier New', Courier, monospace; overflow:auto; color: #222; background: #DDD; padding: 0.2em; font-size: 10px; width:400px">on run {input, parameters}
set allItems to every item of input
repeat with currItem in allItems
tell application "TextWrangler"
open currItem
end tell
activate application "TextWrangler"
tell application "System Events"
tell process "TextWrangler"
delay 2
--when the Word document is opened I have told it to press okay !
--I don't know what key you want it to press in the dialog box
keystroke return
delay 2
--save the doc
keystroke "s" using command down
delay 5
--close the doc
keystroke "w" using command down
end tell
end tell
end repeat
return input
end run</pre>
The above script should open each Word Document, press a button in the dialog box then do a save and then close the doc...then loop through the rest of them.
You need to replace the name Text Wrangler with Microsoft Word (or whatever it is called!), I don't have it on my Mac.
You will have to let me know what button needs pressing in the first dialog, if it isn't the 'highlighted ' one then we will have to amend the script...
regards
Ric

How can you create a voice recording and save it as an mp3?

I want to create a voice recording and save it as an mp3. How can I do that on the MAC? Right now I can only think of recording the voice in iMovie, but it does not have a choice to save as an mp3.

Rather that iMovie, you may want to check our Audacity.
It's a free, open-source audio editor and recorder.
You can easily save a recording as an MP3.
http://audacity.sourceforge.net/
Matt

How do i take an iphoto slideshow and save it to my downloads?

How do i take a slideshow with music i have created and Make it download or save in a file to be used for other purposes? Such as You tube, Facebook, or make it to a dvd. I made it for my Mothers funeral and had it played instead of haveing someone speak. I would like to be able to copy it and make dvds for my five sisters, and family members, and close friends, who would like a copy. for when they miss her. Since its only on my computer i cannot share it with them Any Info would be greatly appreciated !!! :-) Thanks for all the help.

Click on the Exort button at the bottom of the slideshow window,
select the size you want in the Export window,
and save it to the Desktop or wherever you need it.
OT

How to search files, get cells, loop, and save

Howdy Folks, I'm another Applescript newbie in over my head. I'm working on a script to copy xl files into a master xl file. the files is a roster with student and class information. the number of students will vary. WIth help from a friend I have it about 80% where I want it. Need help with the rest. I hope its okay to ask multiple question about the script if not i do apoligize.
when the script runs it asks for the location of the file. the files are titled Houston_Sam_DWI_Jan.xlsx. I have several files in a master folder that i am trying to get data from, but the script goes through one at a time.
I know i need to loop it somehow to go through all of the files containing "DWI" in the title, I just don't know how to do it.
the script is set up to get a range of cells, but there are other individual cells i need to copy like dates(C7), Instructor(H7), and location(C11). How do i get these individual cells and paste them to the master doc: Location(E7), Dates (F7), Instructor(G7) and have them repeat down the column as the number of students from each of the classes populates the list.
finally, i have the master file name as annual report, the script does update the anual report file, but when it goes to save it creates a file named "sheet 1". i just want it to update the annual report file and save all changes.
here is the script i am currently working with:
set master_path to alias "Users:bs:Desktop:master:Annual Report.xlsx"
get_all_files(master_path)
on get_all_files(master_path)
          set example_path to choose file with prompt "Find an example file to work with"
transfer_data(example_path, master_path)
end get_all_files
on transfer_data(child_path, master_path)
          tell application "Microsoft Excel"
                    set child_book to (open workbook workbook file name (child_path as string))
                    set child_doc to worksheet 1 of child_book
                    set master to worksheet 1 of (open workbook workbook file name (master_path as string))
                    set num to 15 --All lists start at index 12 or later, I'm putting 10 to be safe
                    set students to {}
                    tell child_doc --grab values from child document
                              repeat until (value of cell (("A" & num) as string)) is 1
                                        set num to num + 1
                              end repeat
                              repeat until (value of cell (("B" & num) as string)) is ""
                                        set end of students to {name:(value of cell (("B" & num) as string)), driver_id:(value of cell (("C" & num) as string)), DOB:(value of cell (("D" & num) as string)), pre_test:(value of cell (("J" & num) as string)), post_test:(value of cell (("K" & num) as string)), cert_id:(value of cell (("L" & num) as string))}
                                        set num to num + 1
                              end repeat
                    end tell
                    tell master
                              set num to 7
                              log (value of cell (("B" & num) as string))
                              repeat until (value of cell (("B" & num) as string)) is ""
                                        set num to num + 1
                              end repeat
                              repeat with student in students
                                        set value of cell (("B" & num) as string) to name of student
                                        set value of cell (("C" & num) as string) to driver_id of student
                                        set value of cell (("D" & num) as string) to DOB of student
                                        set value of cell (("H" & num) as string) to pre_test of student
                                        set value of cell (("I" & num) as string) to post_test of student
                                        set value of cell (("J" & num) as string) to cert_id of student
                                        set num to num + 1
                              end repeat
save master
                    end tell
save child_book
close child_book
save active workbook in master_path
close active workbook
          end tell
end transfer_data
Any help would be greatly appreciated.

That did it. had to tinker with it but it's doing what i want. Thanks for all of the help. here is the final code
tell application "Finder"
          set master_path to alias "Users:bs:Desktop:master:Annual Report.xlsx"
          set filesWithDWI to get every file of folder ((path to desktop folder) & "master" as string) whose name contains "DWI"
          repeat with f in filesWithDWI
                    my transfer_data(f, master_path)
          end repeat
end tell
on processfile(f)
display dialog f as string
end processfile
on transfer_data(child_path, master_path)
          tell application "Microsoft Excel"
                    set child_book to (open workbook workbook file name (child_path as string))
                    set child_doc to worksheet 1 of child_book
                    set master to worksheet "sheet 1" of (open workbook workbook file name (master_path as string))
                    set num to 15 --All lists start at index 12 or later, I'm putting 10 to be safe
                    set students to {}
                    tell child_doc --grab values from child document
                              repeat until (value of cell (("A" & num) as string)) is 1
                                        set num to num + 1
                              end repeat
                              repeat until (value of cell (("B" & num) as string)) is ""
                                        set end of students to {namevalue of cell (("B" & num) as string)), driver_idvalue of cell (("C" & num) as string)), DOBvalue of cell (("D" & num) as string)), pre_testvalue of cell (("J" & num) as string)), post_testvalue of cell (("K" & num) as string)), cert_idvalue of cell (("L" & num) as string))}
                                        set num to num + 1
                              end repeat
                              set startdate to range "C7"
                              set classlocation to range "C11"
                              set instructor to range "H7"
                    end tell
                    tell master
                              set num to 7
                              log (value of cell (("B" & num) as string))
                              repeat until (value of cell (("B" & num) as string)) is ""
                                        set num to num + 1
                              end repeat
                              repeat with student in students
                                        set value of cell (("B" & num) as string) to name of student
                                        set value of cell (("C" & num) as string) to driver_id of student
                                        set value of cell (("D" & num) as string) to DOB of student
                                        set value of cell (("H" & num) as string) to pre_test of student
                                        set value of cell (("I" & num) as string) to post_test of student
                                        set value of cell (("J" & num) as string) to cert_id of student
                                        set value of cell (("f" & num) as string) to startdate
                                        set value of cell (("E" & num) as string) to classlocation
                                        set value of cell (("G" & num) as string) to instructor
                                        set num to num + 1
                              end repeat
                    end tell
save child_book
close child_book
save active workbook in master_path
close active workbook
          end tell
end transfer_data

How to increase the camera download speed and save binary file speed

My camera is pco dimax S1 camea. The interface is cameralink Base.
The memory is on board.
I use 1000fps@480*480 resolution to capture 1 sec.
Then download the images from the on board memory to computer.
The board in the PC side is NI-1429 board.
Theory, the cameralink transport speed should be 250MB/S
In the file format, file size should be (480(H)*480(V)*16bit*1000fps)/8=460.8 MB
Logically it should be download complete under 2 sec
But in my program, the real download speed at about 40 framess/s, (480*480*16*40)/8=18.432 MB/S
(250MB/S)/(18.432MB/S)= 13.85
The download speed is totally slower 13.8 times.
I use the SSD and RAID 0 to save the file.
I did some test as below:
1. Try to save png or binary file. The speed of binary had a litter faster, but it still doesn't close the 250MB/S.
2. I try to adjust the resolution from 16bit to 12bit or 8bit to save the image. The download speed still 40 frames/s(18.432MB/S)
3. I try to use IMAQ Sequence to save the file, but how to add in my program, can anyone help me?
On the other hand, I also guess may be the structure of my program have an problem cause the download and save speed slow.
Attached please find the program.
To see if there are other ways to increase the speed of file written!
Attachments:
Imagesavebinary.vi ‏91 KB
test.png ‏157 KB

You have to separate your step1 and step2 into two parallel loop.
If you put the two tasks in one loop, the lower speed task will affect the loop speed.
So that the program won't achieve the top speed.
Is continuous acquisition required for your application? Can sequence acquisition or finite acquisition be your workaround?
The memory handling in continuous acquisition is way a lot more difficult than finite acquisition.
I would suggest you to figure out how finite acquisition work and then jump into the continuous acquisition application.

How to add My Documents to Open and Save as

Hi,
How can I add My Documents to the list of places under File ->"Open" and "Save as" in Office 2013 applications?
Users in my organization are truly frustrated by having to click on "Computer" and then choosing the "My Documents" folder every time they need to access their My Documents. Any suggestions?
Thanks!
-sul.

Can you make a screen capture, or diagram showing exactly what you want to do? I just can't picture it.
If what you want to do is place it directly under the Open command in the File menu it would not be easy. The only slight possibility I can think of would be to create custom ribbon XML code to modify the "Backstage Pane". I
How do I change Backstage(File) view in Excel 2010
Customize the Office User Interface in Office 2010
http://technet.microsoft.com/en-us/library/ff468686.aspx
Updated: September 9, 2010
This article lists resources that will help you customize the Microsoft Office Fluent user interface (UI) in Microsoft Office 2010 applications.
Microsoft introduced the ribbon extensibility model in the 2007 Microsoft Office system as part of the Office Fluent UI. This was a new way to customize the user interface and create custom tabs and groups that
were specific to users’ needs. Office 2010 extends the span of the UI extensibility platform by providing support for customization of the new Microsoft Office Backstage view.
Customize the Backstage view
In Office 2010, the Microsoft Office button is replaced by the
File tab. The File tab brings you to the Backstage view. The Backstage view is customizable and lets organizations customize the UI to suit their needs.
For information about how to use and customize the Backstage view, see the following resources:
Introduction to the Office 2010 Backstage View for Developers (http://go.microsoft.com/fwlink/?LinkId=182189
http://msdn.microsoft.com/en-us/library/ee691833%28v=office.14%29.aspx
Customizing the Office 2010 Backstage View for Developers (http://go.microsoft.com/fwlink/?LinkId=184245
Change the Ribbon in Excel 2007 or Excel 2010
http://www.rondebruin.nl/ribbon.htm
Ron de Bruin (last updated 6-Oct-2010
<snip >
More RibbonX examples
You can download 8 Excel files here with basic RibbonX examples for Excel 2007 and Excel 2010.
Download Example Excel files Last Updated : 27-June-2010
Add custom group in built-in tab.xlsm
Add menu and buttons to Backstage or Office Button.xlsm
</snip>
I haven't seen any documentation about customizing the 2013 backstage.

How to sign VBA Code in AO and save it on BW-IP side.

Does anybody know if it is possible to sign vba code in AO and save this as Document into BW-IP (to SAP NetWeaver)?
If I try to sign the complete Workbook with a certificate I always get the prompt to convert the file into a Excel file, is it still possible than to save the Workbook to SAPNetWeaver? Anybody tried?

Hi,
I have done that many times. Create a button in the toolbar,say 'SAVE'. Write the code in the subroutine user command.For example :
*&      Form USER_COMMAND
FORM USER_COMMAND USING R_UCOMM LIKE SY-UCOMM
        RS_SELFIELD TYPE SLIS_SELFIELD.
DATA : REF_GRID TYPE REF TO CL_GUI_ALV_GRID.
DATA: L_VALID TYPE C.
*Code to reflect the changes done in the internal table
IF REF_GRID IS INITIAL.
    CALL FUNCTION 'GET_GLOBALS_FROM_SLVC_FULLSCR'
      IMPORTING
        E_GRID = REF_GRID.
ENDIF.
IF NOT REF_GRID IS INITIAL.
    CALL METHOD REF_GRID->CHECK_CHANGED_DATA
      IMPORTING
        E_VALID = L_VALID.
ENDIF.
CASE SY-UCOMM.
    WHEN 'SAVE'.
    PERFORM BDC."Write all you BDC code in this subroutine
ENDCASE.
ENDFORM.
Hope this will help.
Thanks & Regards,
Rock.

How do I convert .txt to .pdf and keep the formatting

I have a large .txt file that I would like to convert to .pdf. I have tried to print the file and choose Adobe PDF but the output is just a mess. I loose all the formatting and get blank pages every so often. Does anyone know if is possible to convert .txt to .pdf and keep the formatting. I would try a virtual printer application but I am not able to just install any application on my office computer. Any help would be greatly appreciated.

It may be a bit late for you now but in future (and for anyone else interested) I would recommend copying the text into a word document and changing the text font to Consolas. Adjust the size to fit the page again and it should match the original notepad formatting.

How to tell script colse all files and save, but no untitle docs

Hi everyone
I want to colse the open files and save them but no those files which have never been saved.
I try this script but after ran, all the files are no be saved.
        var docs = app.documents;
             for (var i = docs.length-1; i >= 0; i--) {
                 if(app.activeDocument.saved == false){
                       docs[i].close(SaveOptions.NO);
                 else if(docs[i].close(SaveOptions.YES));
can someone tell me what's wrong with the script?
thanks
Regard
Teetan

var docs = app.documents;
for (var i = docs.length-1; i >= 0; i--) {
    if (docs[i].saved == false) {
        docs[i].close(SaveOptions.NO);
    else {
        docs[i].close(SaveOptions.YES);

How to Create Dynamic button at runtime and save it by using c#?

Hi All,
Can someone please provide me code to create button dynamically at runtime and save it permanently?
Your quick help is appreciable.
regards,
Sourabh

You cant add controls to the visual tree a runtime which persist beyond the lifetime of the application. You will have to persist an indicator to your program which tells it to add the control. Adding a control is as simple as initializing
it and adding it to a parent already on the tree. Controls can be created programmatically or using the XamlReader.Load static method. You can find XamReader.Load in Windows.UI.Xaml.Markup in windows 8.1, Windows 8.1/Windows Phone unified
projects. For old windows phone ad just Silverlight I believe it is in System.Windows.Markup.
Hope this helps.

How to upload widescreen SD to Youtube and save widescreen format ??

Similar Messages

Maybe you are looking for