How To use External Message To Send IDOC From XI To R/3

we need to split one source message to several IDOC To
R/3,But Standard Imported r/3 idoc contains only one idoc per message,so we export the standart idoc to a
xsd file and change it to a multi "IDOC" segment structure and import back to xi again,after that,we create a message interface use the imported
message type and use it to send IDOC to r/3 via idoc adapter,but at the "call atapter" step it gernarate a
error:"Unable to interpret IDoc interface MI_IDOC_IN".
what we should pay attention to when use external message
to send idoc to r/3?
(when use the imported idoc message to send single idoc per message,it is no probelm)
thx

The way this works is:
1. In your Message Mapping use the External WSDL defintion that you loaded after tweaking the "IDOC" Occurance.
2. Then in your INTERFACE MAPPING use the orginal IDOC Name that you imported from R/3.
3. Use the original IDOC Name in Integration Builder too.
This should work.
Thanks
Ashish

Similar Messages

Report question: how to use external table to bring data from excel file?

i need to import excel data into oracle report, how to do that? thanks.

Hi... What is the error message you get when using external tables?
You must create a control center connection in the Connection Explorer.
I recommend you read this:
http://download-east.oracle.com/docs/cd/B31080_01/doc/owb.102/b28223/toc.htm
Look for the following sections:
- Using External Tables (and the "External Tables versus Flat File Operators" sub section)
- About Flat File Modules
- Chapter 16, Deploying Target Systems
Regards,
Marcos

Send IDoc from External System to SAP system

Hi Folks,
I have a requirement to send IDocs from an external system to the SAp system. Basically the external system is a subsystem which is able to send & receive idocs. The external system is currently able to send idocs to SAP system through the ALE layer but now we have to replace it by PI. Now the external system has to send teh IDocs to the SAP ECC system through the SAP PI 7.0.
Kindly let me knowq how I can achieve it.
Regards,
Santosh

Hi Satish,
You can achieve this requirement
1)If your external system going to support web service cals then send IDoc from External system as a web service, in PI use sender side SOAP and receiver side IDoc receiver channel to send IDoc.
or
2)Use proxy program ,implement the same ALE logic in PI.
or
3)Copy the Extenal IDoc message in to file folder as XML,then use file adapter to pick up this message and send it SAP using IDoc.
Regards,
raj

Message SR 053 when i send idoc from SAp R/3 4.6C to PI 7

Hi,
I try to send idoc from SAP r/3 4.6C to PI 7. I had made ALE configuration in my sender system ( SAP 4.6C) but idocs are not sent to PI. In SM58 i have message "Name or password is incorrect (repeat logon)". Yet i'm sure that user and password are correct because if i test RFC destination using SM59 , test is OK.
Is somebody can help me ?

Hi,
In R/3 :
my RFC destination is type 3 and point to XI. The port in the partner profile point to this RFC destination. ( all seems good !).
In Xi : i created a port and i load manually idoc in idx2 to be sure that RFC destination was OK. Nothing in IDX5.
When i send idoc MATMAS using BD10 from R3 to Xi i have something very strange: first the message B1 038 "1 master IDocs set up for message type MATMAS" and just after
the XI logon screen appears !! Then message "1 communication IDoc(s) generated for message type MATMAS" and this idoc stay in SM58 with message "Name or password is incorrect (repeat logon)".
Somebody can give me requires caracteristics for XI user used in R/3 RFC destination ?

How to use PO message type to output 'Form' as PDF file

Dear experts,
I am working for a topic of how to use PO message type to output 'Form' as 'PDF file', and save to external file system automatically.
Any one familiar to this topic, please kindly give me some guide, thank you!
Regards,
Joyce

Hi,
Go through the program RSTXPDFT4 (Converting SAPscript (OTF) or ABAP List Spool Job to PDF), you will get some idea. Using this program you can convert spool into PDF file.
-Alpesh

How to send IDocs from a non-SAP system to a SAP system

Hi everyone i am new to SAP R/3 System.
Currently i am required to send IDocs from a non-SAP system to a SAP R/3 System.
There is a guide on Cost-Effective and Quick Communication between SAP and 3rd Party Systems using IDOC HTTP XML Interface. But its from a SAP system to a non-SAP system and i am able to do that.
Is there any step by step guide where they teaches you how to send IDocs from a non-SAP system to SAP system via similar method?
Thank You!

Hi,
I hope this link may help you......
http://publib.boulder.ibm.com/infocenter/iisinfsv/v8r1/index.jsp?topic=/com.ibm.swg.im.iis.ds.entpak.sapr3.use.doc/topics/c_pack_r3_Introduction.html

How to use java mail to send email to hotmail box

how to use java mail to send email to hotmail box??
i can send emails to other box(my company's email account) but for hotmail, the program didnt print any err or exception the recepient cant receive the mail.
thanks

you ust to download activation.jar and mail.jar and add them to your build path.
i have used the googlemail smtp server to send mail the code is following:
public void SendMail()
Properties props = new Properties();
props.put("mail.smtp.user", username);
props.put("mail.smtp.host", host);
props.put("mail.smtp.port", port);
props.put("mail.smtp.starttls.enable","true");
props.put("mail.smtp.auth", "true");
props.put("mail.smtp.socketFactory.port", port);
try{
     Authenticator auth = new SMTPAuthenticator(username,password);
Session session = Session.getInstance(props, auth);
MimeMessage msg = new MimeMessage(session);
msg.setText(text);
msg.setSubject(subject);
msg.setFrom(new InternetAddress(senderEmail));
msg.addRecipient(Message.RecipientType.TO, new InternetAddress(receiver));
Transport.send(msg);
}catch(Exception ex) {
     System.out.println("Error Sending:");
System.out.println(ex.getMessage().toString());
and this the SMTPAuthenticator Class which you will need too.
class SMTPAuthenticator extends javax.mail.Authenticator {
     private String fUser;
     private String fPassword;
     public SMTPAuthenticator(String user, String password) {
     fUser = user;
     fPassword = password;
     public PasswordAuthentication getPasswordAuthentication() {
     return new PasswordAuthentication(fUser, fPassword);
     }

How to send IDOC from nonSAP to SAP

Hi ;
I need to send IDOC from nonSAP to SAP. I have experience it with XI and BC..but now I need sending IDOC to SAP directl without these tools..
Can you explain it via sample? (I know already how to create port , define LP from we20,we21 ).
Firstly Do I need to create a RFC destination ? and I want to send IDOC as XML by HTML post method..Which port must I send?
Must this port point to this RFC?
Thanks.

Hi,
Here you have to generate an IDOC and convert into XML format and put at required server
third party will accept the IDOC XML not the IDOC.
Just check with ur third party in which format the data is accepted.
if its IDOC XML then u can use the file receiver adapter and place the IDOC XML file on 3rd party folder.
You use the IDoc adapter to have IDocs (intermediate documents) processed by the Integration Engine. IDocs from SAP systems Release 3.1x or higher are supported. You can also use the IDoc adapter to connect non-SAP systems to the Integration Engine.
The IDoc adapter converts the IDocs to IDoc XML format so that they can be processed by the Integration Server pipeline.
You can also transfer XML in IDoc format received from the Integration Server to connected systems. The Integration Server pipeline must convert the received XML to IDoc XML, and then transfer this IDoc XML to the IDoc adapter. The IDoc adapter converts the IDoc XML to native IDoc format and sends the IDoc to the identified receiver system using the standard IDoc interface.
Regards,
Shamma

How to use external hard drive and iTunes together?

how to use external hard drive and iTunes together?

Yes I did get to that part.... I went trough external to retrive itunes folder... When I selected the folder, it said that it was locked, choose another folder... I then went to my external again to my itunes folder and and used command I to see if folder was locked and it wasn't.... it was suggested on another forum to reboot.. which I did and still same problem... All I want to do is link my external hard drive that has my itunes playlist from another Mac to my new one.. and to also use the external as the main source for adding new songs to my playlist...

How to use external Java API in Java Embedd inside BPEL

How to use external classes inside the BPEL in Java Embed Activity ? Any sample code availble ? Like i want to use log4j API inside BPEL.

No you dont have to change your startManagedServer.cmd/.sh everytime you need to have a Java Embedding activity. You only need it in case of using Log4J. As log4j requires a configuration xml viz log4j.debug.xml and log4j.dtd you need to let the soa managed server know about it. The best way to load this configuration files is using the JAVA_OPTIONS command during server startup.
Hope the explanation helps.

How to use external library(in .jar format) in netbeans project?

How to use external library(in .jar format) in netbeans project?
Thanks!

How to use external library(in .jar format) in netbeans project?
Thanks!

How to use fault message for error handling.

HI
Anybody has an idea about how we use fault messages to handle errors in XI
Thanks
Debraj

Hi,
Refer this link. This pdf file has descriptions about fault message types and how to use it.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/4cdfc390-0201-0010-2197-da4ada09f281
Regards,
Uma

TS3672 How come i cant see any of my messages nor send any from my iphone 4?

How come i cant see any of my messages nor send any from my iphone 4?

Verify/repair the startup disk (not just permissions), as described here:
The Repair functions of Disk Utility: what's it all about?
After having fixed all filesystem issues, if any, and making sure that there’s enough space available on the startup disk (a few GB, plus the space needed to make a backup copy of the Mail folder), try this:
1. Quit Mail if it’s running.
2. In the Finder, go to ~/Library/Mail/. Make a backup copy of this folder, just in case something goes wrong, e.g. by dragging it to the Desktop while holding the Option (Alt) key down. This is where all your mail is stored.
3. Locate Envelope Index and move it to the Trash. If you see an Envelope Index-journal file there, delete it as well.
4. Open Mail. It will tell you that your mail needs to be “imported”. Click Continue and Mail will proceed to re-create Envelope Index -- Mail says it’s “importing”, but it just re-creates the index if the mailboxes are already in Mail 2.x format.
Note: For those not familiarized with the ~/ notation, it refers to the user’s home folder, i.e. ~/Library is the Library folder within the user’s home folder.

How to use external jars in NW2004

Hello Experts,
can i use the same approach mentioned in the below Weblog for using the external jars in NW2004.
/people/bertram.ganz/blog/2008/11/24/how-to-use-external-jar-files-in-web-dynpro-development-components
and if not then what will be the best way to achieve it in NW2004.
Please provide your inputs on above.
Regards,
Siddharth

Hi Sidharth,
If you are using web dynpro DC perspective then you need to follow the following points to use the external jar files in it.
1. Create a external library project.
2. copy the external jars in the library folder os the projects.
3.) Select all the jars from the u201CLibrariesu201D folder, Right click and then select Development Component and click on Add to Public Part
4.Select the first Radio Button (Provides an API)and give some nameto it.
5. Repeat the step no 3 but now select the second radio button other than as selected in step no 4.
6. Now build your lirary DC.
7. Now create a j2ee DC project.
8. ) Expand the node DC Definition and Right Click on Used DC. Select Add Used DC.
9. Select the External Library DC with build time dependency.
10.Right click on the J2EE DC and then select Development Component followed by Build
11. Right click on the J2EE DC and then select Development Component followed by Deploy
now you can use both the libary DC and the j2ee DC in your web dynpro DC as used DC.
But if you have created a web dynpro project only(but not DC) than you can directly add the external jars in java build path
hope this will help
regards
Narendra
Edited by: Narendra Singh on Oct 27, 2009 11:22 AM

Error sending IDOC from external Java application to Sap ERP system

Hi Experts!
When I try to send Idoc from Java application to XI an error occurs : no service for system CLNTJAVA, client in Integration Server.
My question is: What value the setSenderPort() is excepting?The Java third party business system's logical name or the ERP business system's logical name where the JCO can be found?I tried both of them, but still have the problem.
Please help. I read all threads about this error, but non of those can help me.
My relevant java sourcecode:
doc.setSenderPort("CLNTJAVA");
The XI documentation says that:In the case of non-SAP senders, the entry in the SNDPOR field is interpreted as a logical system name, and the corresponding business system is searched for in the runtime cache.
Both case(third party business sytem and erp business system) I have configured the ID i think correctly. I made a business systems,I configured the adapter specific identifies,I made the IDX1 port,I made the RFC destination,I polled the IDOC type with IDX2 transaction, I have made full cache refresh,I configured the INTEGRATION_DIRECTORY_HMI rfc destination,but I do not made any communication channels, receiver determinations, receiver agreement.
My configurations if it can help for you.
Hostname:sapsp5
System name: NE2
Clients:
000 ERP
001 Integration Server
SLD configurations:
Third Party Technical system name: Java_sytem
Business System:CLNTJAVA
Logical system name: CLNTJAVA
ID configurations:
Business System:CLNTJAVA
adapter-specific identifiers:logical system:CLNTJAVA, the rest is initial,because I cant change it.
IDX1 port name: CLNTJAVA the client is 001. the rfc destination is client_001.
I think the IDX1 port and the adapter specific identifiers are wrong. is it?
my java source if the sender is the JCO
doc.setSenderPort("INTSERV");
My configurations if the sender is the JCO.
SLD configurations:
Technical system name: NE2
Business System:INTEGRATION_SERVER_NE2
Logical system name: INTSERV
ID configurations:
Business System:INTEGRATION_SERVER_NE2
adapter-specific identifiers:logical system:INTSERV,system NE2,client 001.
IDX1 port name: INTSERV the client is 001. the rfc destination is client_001.
Could this error be an autorization error?I tired to connect to the xi from the Java, with the user PIISUSER extended with PISUPER roles.
Thank very much.

Hi!
My SNDPOR already set to my source business system's logical name if you check my configurations(JAVACLNT), so there is another problem unfortunately. I set SNDPRN to JAVA, but it still does not work.
Check this configuration please(posted here:
No service for system ... in Integration Directory)
doc.setMessageType("ACC_DOCUMENT");
doc.setRecipientPort("SAPSE1"); // get stuck in XI mapping if not set
doc.setRecipientPartnerType("LS");
doc.setRecipientPartnerNumber("SE1CLNT500");
doc.setSenderPort("SAP3MA");
doc.setSenderPartnerType("LS");
doc.setSenderPartnerNumber("TREMACLNT");
doc.setClient("100");
Inside XI configuration integration builder
Business Service: Service: TREMACLNT
Under the menu Service - Adapter specific identifiers
Idoc Adapter Logical system: TAPPMAN (This thing is important when sending idoc XI -> SAP and should match the logical sys in the receiving SAP system)
IDoc Adapter and RFC adapter R/3 Sysytem ID: 3MA
Client: 100
In IDX1 trans
Port: SAP3MA (Note that the 3MA here is matched against the IDoc Adapter and RFC adapter R/3 Sysytem ID: 3MA)
(a not so well documented feature)
Client: 100
RFC Destination: SE1 (A SAP test system from where IDOC def can be imported, rfc dests are setup in SM59)
I guess that your idx1 port name is the same as the SNDPOR value. I think it should be, because the XI is whatching the IDOC traffic in the idoc adapter port, so you should send the IDOC from external system to the adapter port. Is it right?
My idx1 port is the same as my SNDPOR value in Java,but still came the error.

How To use External Message To Send IDOC From XI To R/3

Similar Messages

Maybe you are looking for