How to wrap the export/import utility using perl

Hello,
How to user perl to wrap the export/import utility? Thanks.

If you are using DBMS_SCHEDULER, I would expect that you would just invoke export directly. I'm not sure I see the benefit to putting a Perl wrapper on top in that case. Of course, DBMS_SCHEDULER could invoke a Perl script just as it can invoke a shell script if there was some particular need to have a Perl layer there.
Of course, I assume that you're not trying to invoke export on a regular basis as your primary backup method... Exports should be a complement, not a supplement, to a proper physical backup (i.e. via RMAN).
Justin

Similar Messages

  • Problem with the Export/Import Utility when importing a .portal file

    Hi there !
    I got the following error when trying to import a .portal file to a desktop by using the Export/Import Utility.
    <13-11-2009 12:13:26 PM CLST> <Error> <netuix> <BEA-423487> <Import: did not add navigable [2203] as it would cause an illegal dependency.>
    The error is shown several times, starting from the number [2203] until [2285].
    It causes that i can't see some pages of my portal... it's like they dont exist.
    I Hope you can help me fix it, because i have not found any information about it.
    Best regards
    P.D.: I am using the BEA Weblogic 10.0.1 version.
    Edited by: user12231353 on 16-nov-2009 12:38

    I upgraded to cs6 and imported all the images together, I made them 3 frames per and exported them. The problem is slightly improved but still there. I'm still getting flicker.
    Check it out: http://www.youtube.com/watch?v=g_yZjskzTLs
    Black screen version from yesterday if you want to look at it: http://www.youtube.com/watch?v=NCcAEO8YU6Y
    The problem has to be with my settings. when I upgraded it deleted all my prefrences and settings. There was no dslr preset either so I had to redo it all from  scratch to the best of my ability. Here is a complete rundown of my settings:
    I shoot with a canon dslr 60D in 24fps and upload all my stuff in 1080p. Please advice.

  • (WebLogic 10.3)how to install and execute the export/import utility (xip)

    Hi there,
    I am migrating an application from Weblogic 10 to Weblogic 10.3. I need to import a desktop from a .portal file in Weblogic 10.3. I know how to do the process of installing and executing this tool in WebLogic 10, but I don't know how to do it on the 10.3 version, because it's different and I haven't found any information about this process on the internet.
    Could you please tell me what do I have to do? or give me a document that can I follow the steps from?
    Thanks & Regards
    Franco Utreras.

    Do you mean how to create a new desktop portal or propagation?
    Creating desktop
    [http://download-llnw.oracle.com/docs/cd/E13155_01/wlp/docs103/portals/creating_staging.html#wp1018386|http://download-llnw.oracle.com/docs/cd/E13155_01/wlp/docs103/portals/creating_staging.html#wp1018386]
    Propagation
    [Using Workshop Propagation Tool |http://download-llnw.oracle.com/docs/cd/E13155_01/wlp/docs103/prodOps/propTool.html]
    [Using ANT|http://download-llnw.oracle.com/docs/cd/E13155_01/wlp/docs103/prodOps/scripts.html]
    AFAIK, the upgrade is pretty straightforward and I've done it before using the documentation available at [http://download-llnw.oracle.com/docs/cd/E13155_01/wlp/docs103/upgrade/upgrade_process.html#wp1065081|http://download-llnw.oracle.com/docs/cd/E13155_01/wlp/docs103/upgrade/upgrade_process.html#wp1065081]
    Cappa

  • I need information on how to install and execute the export/import utility

    Hi there,
    I am migrating an application from Weblogic 10 to Weblogic 10.3. I need to import a desktop from a .portal file in Weblogic 10.3. I know how to do the process of installing and executing this tool in WebLogic 10, but I don't know how to do it on the 10.3 version, because it's different and I haven't found any information about this process on the internet.
    Could you please tell me what do I have to do? or give me a document that can I follow the steps from?
    Thanks & Regards
    Franco Utreras.

    Hi Franco,
    If you will post your Query in http://forums.oracle.com/forums/forum.jspa?forumID=573 (WebLogic Portal Specific Forum)...then you may get more Accurate, Quick and Experties Answers.
    Thanks
    Jay SenSharma
    http://jaysensharma.wordpress.com  (WebLogic Wonders Are Here)

  • Some problme in the export/import utility

    Dears,
    I am using HTML_DB v.1.6.1.00.03
    I ran export procedure and after that I am trying to run import one in the another ID application.
    I am getting the following error message:
    ORA-20001: GET_BLOCK Error. ORA-20001: GET_STMT error. ORA-20001: Execution of the statement was unsuccessful. ORA-02291: integrity constraint (FLOWS_010600.QUERY_COLUMN_TO_QRY_OBJECT_FK) violated - parent key not found <pre>declare&lt;br&gt; s varchar2(32767) := null;&lt;br&gt; l_clob clob;&lt;br&gt; l_length number := 1;&lt;br&gt;begin&lt;br&gt;s:=s||'SELECT '||chr(10)||&lt;br&gt;' &
    I sent full text of my application to your support's e-mail '[email protected]' on 29.11.05.
    Unfortunately I did not get any answer.
    I would greatly sincerely a prompt response.
    Best regards,
    Oleg Mochkin,
    ExLibris Israel
    Office: 972-2-6499211
    e-mail [email protected]

    Hi Scott,
    Sorry for misunderstanding.
    Unfortunately my application has 70 pages included 100 regions.
    Now it is very difficult for me to know which region has been copied.
    I has an additional problem. the problme is that when I had tried to send you my application by e-mail your e-mail machine returned me the following message
    ================================
    The original message was received at Fri, 16 Dec 2005 15:53:45 +0200 from il-exchange01.exlibris-int.il [10.1.235.66]
    ----- The following addresses had permanent fatal errors ----- <[email protected]>
    (reason: 554 5.7.1 Oracle Corporation does not accept mail with .ZIP attachments.)
    ----- Transcript of session follows ----- ... while talking to agminet04.oracle.com.:
    DATA<<< 554 5.7.1 Oracle Corporation does not accept mail with .ZIP attachments.
    554 5.0.0 Service unavailable
    =======================
    I sent you another e-mail with tar.gz archive.
    Please look into all my e-mails.
    Could you be available to check my application and probably to give me another decision of my problem?
    Thanks,
    Oleg

  • Export/import utility from within apex

    Hi Friends,
    With my knowledge in oracle forms the export/import utility can be called from within a form in runtime
    using a push button.But how can i achieve this using a similar button in the oracle apex.
    Pls give me a helping hand.Thanks.
    regards,
    kehinde

    Hello:
    The Oracle Data Pump utility is now the preferred tool to use to import and export data and metadata from an Oracle database. Oracle Data Pump provides capabilities that far exceed those provided by the older imp/exp programs. Further, in addition to command line invocation of the tool, Oracle Data Pump has a set of pl/sql APIs (DBMS_DATAPUMP) that will let you do import and exports from pl/sql. You can therefore easily set up an APEX page that will accept a bunch of parameters and execute the appropriate procedures within DBMS_DATAPUMP to do the export/import.
    http://download.oracle.com/docs/cd/B19306_01/server.102/b14215/dp_api.htm#i1008009
    Varad

  • How to turn on and off the Export Import capability in Quality &Production

    Hi All,
    Can any one tell me how to turn on and turn off the export, import capabilities in the Quality n Production Systems . All I know about this is, it is an SAP XI Basis task, and I am not able to get any documents related to it .
    Thanks in Advance,
    Hemanthika.

    Hi,
    Do you mean you want to disable Tools --> Export / Import feature?
    Normally if you are using File Transports then lock the OS level access for all user id's and this would make sure that no transport of objects take place.
    Regards
    Bhavesh

  • 10g export/import utility

    Hi,
    I imported a couple of tables using the export and import utilities. Here is a break down of the process.
    -Exported SH schema as SH.
    -Created a new user 'HT' as sys, granted it resource and connect roles.
    -Ran import utility as HT and imported only 2 tables (sales & products) from the schema export .dmp file.
    -The import runs successfully, saying the tables have been imported.
    -I run a select against user_tables as HT to find the imported tables, which returns no rows selected.
    Why is this?

    Hello,
    How did you exported the tables?
    If you are cloing the entire schema and using conventional export/import utility then do following
    exp system/manager owner=userA file=userA.dmp log=userAexport.log
    imp system/managet fromUser=userA toUser=userB file=userA.dmp log=userBimport.logAnd if you are importing just couple of tables then do following
    exp username/password tables=table1,table2 file=tables.dmp log=tableexport.log
    imp username/password tables=table1,table2 file=tables.dmp log=tableimport.log rows=Y ignore=Y
    #With tables (make sure table doesn't exists in target schema).
    imp username/password tables=table1,table2 file=tables.dmp log=tableimport.log YOu can also use datapump but it has different options and I recommend you should refer to oracle documenation for using datapump.
    Regards
    Edited by: OrionNet on May 25, 2009 2:27 PM

  • How to wrap the text in column headers?

    Hi Friends,
    Can anyone please suggest how to wrap the text in column headers of a Java WebDynpro table?
    I believe that caption is the only UI element that a column header can have and it does not allow wrapping of the text.
    My original requirement is as follows,
    In a table I need to dynamically set the width of the columns according to the width configured by the user in some other view. All the columns of the table are dynamically rendered.
    Now what happens is when the user sets the width of the column to a rather low value, say 15 pixels, then the column is displayed like
    Supplier Catalog Name
    Sheila
    Catalog
    Name
    Dropdown
    As you can see it looks rather odd.
    Supplier Catalog Name is the header of the column and I use IWDCaption for header.
    Sheila Catalog Name Dropdown is the value of a particular row at the specified column. I am using a TextView as the TableCellEditor.
    I think what is happening here is that the framework wraps the text in the TextView according to the width specified (15px) and then the column width is extended because it can not accommodate the text (Supplier Catalog Name ) of the column header.
    We are using SAP NetWeaver Development Studio 7.0.12 as the IDE.
    I searched some forums and many people have suggested using scrollable columns but I don't understand how it will help in wrapping the text in a column header.
    Any help would be of great advantage.
    Thanks
    Amit

    Hi Deepti,
    Thanks a lot for the answer but the option that you have specified does not wrap the text. Instead it truncates the text being displayed and only the substring of the text which could be displayed in the given pixels is displayed.
    I need to show the whole text wrapped (Meaning if the width of the column is not sufficient then the text goes into the next line).
    Ayyapparaj,
    Thanks to you too for an helpful answer. It seems that the Netweaver has finally come up with a way to wrap the text in the column headers but as Manoj pointed out, I do not see the property headerTextWrapping  for a table column, Can you please specify which version of netweaver supports it?
    We are using SAP NetWeaver Development Studio 7.0.12 as the IDE.
    Thanks
    Amit Kapoor

  • I have 100 groups in planning for those 100 groups i want to build roles like interactive,view user,planner etc.for those how to change in export -import folder .xml file  in that edit  how  to change user roles in that xml it will generate automatic id.h

    I have 100 groups in planning for those 100 groups i want to build roles like interactive,view user,planner etc.for those how to change in export -import folder .xml file  in that edit  how  to change user roles in that xml it will generate automatic id.how to do that in xml file ?

    Thanks john for you are reply.
    I had tried what you sad.I open shared service in that foundation project i had export shared service.after that in import-export file.In that role.csv,user.csv,group.csv.Like this file have.When i open user file added some users after i trying save in excel it shown messgse
    I click yes and save the .csv file and import from share servie. i got error like this
    am i doing right way john.or explain clearly

  • How to wrapped the function and procedure

    Hello friends,
    I wanna know that how to wrapped the procedure and the
    functions in oracle i know little bit about the
    wrapping but how can i unrapped the procedure of function
    plz help me i am realy thx to you.

    You can not un-wrap a procedure/function once it has been wrapped.
    look at the following documentation for the wrap utility:
    http://download-west.oracle.com/docs/cd/B10501_01/appdev.920/a96624/c_wrap.htm

  • What roles are required to run the export import?

    Hi,
    I want some info on roles are required to run the export import.
    I have done the following in sys user:
    GRANT EXP_FULL_DATABASE TO IMP_TEST
    GRANT IMP_FULL_DATABASE TO IMP_TEST
    But Doing the above command the IMP_TEST will get all priviles (also the system tables)
    Is there any mechanism to restrict the user to export and import only the tables not anything?
    Thanks and Regadrs

    Hi!
    If you create a user like this
    CREATE USER imp_test identified by password;then the user will be able to import or export only its own schema. If you grant the exp_full_database and imp_full_database roles to this user like you did then the use will be able to export or import the hole database (with SYS schema). But as far as I know you can't set any more restrictions to the user.
    yours sincerely
    Florian W.

  • Move our Existing Database 8.1.7.3 into 10gR2 through Export Import Utility

    Hi,
    I want to move our Existing Database 8.1.7.3 into 10gR2 through Export Import Utility in Oracle EBS (FINANCILA) environment.
    My Current Setup:
    OS: SUN SPARC 8
    ORACLE APPS: 11.5.7
    DB Version: 8.1.7.3
    My New Setup:
    OS: SUN SPARC 10
    ORACLE APPS: R12
    DB Version: 10gR2
    I have successfully created Upgraded file R12 file system and installed R12 tech stack.
    Now we want to move data from Current to New Setup by using Export/Import utility.
    Please suggest me steps or meta link note .
    Thanks
    Anup

    What shoul be better for my case:
    Upgrade Paths :
    E-Business Suite Releases Available Paths
    11.5.8 with 9.2.0.x database Path A
    11.5.9 (base or CU1) with 9.2.0.x or 10.1.0.x database Path A
    11.5.9 CU2 with 9.2.0.x or 10.1.0.x database Path A or Path C
    11.5.9 CU2 with 10.2.0.2 database Path D
    11.5.9 CU2 with 10.2.0.3 database Path E
    11.5.9 CU2 with 10.2.0.4 database Path B
    11.5.10 (base or CU1) with 9.2.0.x or 10.1.0.x database Path A
    11.5.10.2 with 9.2.0.x or 10.1.0.x database Path A or Path C
    11.5.10.2 with 10.2.0.2 database Path D
    11.5.10.2 with 10.2.0.3 database Path E
    11.5.10.2 with 10.2.0.4 database Path B
    Regards
    Anup

  • How to wrap the text in JTextPane

    hi all,
    I have a problem with JTextPane. I have a JPanel which have 4 JButtons, one Details button and one JTextPane. I have set JTextPane to JScrollPane. Thing is when i press the Details button the JTextPane must be visible. Window size is changing. can any one say how to wrap the text in the JTextPane.

    By default text in a JTextPane will wrap, so I don't understand the question.
    Read the Swing tutorial on [url http://java.sun.com/docs/books/tutorial/uiswing/components/text.html]Using Text Components for a working example.

  • On a new imac how much of the HDD is already used with the OS,iLife,apps..

    Looking to buy my 1st ever iMac, the one Im going to get is the base one, with 250Gb HDD (I may upgrade to 320Gb for UK £29 though)
    My question is how much of the HDD is already used by OS X and everything on it? I understand there is some free trial stuff onthat can be installed eg MS Office, iWork etc I would want these removed as wouldnt want them so how much is left before you start adding your own stuff
    I also want to install Win XP on it so need to know what to do, 250Gb in todays computing is very stingy I think, so I need an idea
    cheers

    Here's are some disk usage information from my 20" white C2D. The numbers
    are running totals that include periodic software updates and some of my own
    stuff -- but that would be less than 0.5 GB of the final total.
    OS-X with "no optional packages" is a very usable system; it includes 'core'
    applications such as Safari, iTunes, Quicktime. It does not include any of the
    iLife apps or the iWork/MS_Office test-drive bloatwares.
    The large increase in disk usage for a minimum Leopard system is partly due
    to the inclusion of more apps in the 'core' OS package. Some things that were
    optional in Tiger have become part of the "minimum" Leopard install.
    The Xcode software development tools are a standard part of every OS-X
    distribution, but since most customers have no use for them, they're not
    included in the factory-installed disk image. If you don't plan to install
    them, subtract 3.4 GB from the final tally.
    Factory pre-installed Tiger 10.4.8 & bundled software .................. 16.4 GB
    Erase & Install Tiger 10.4.8 with NO optional packages .................. 2.9 GB
    SoftwareUpdate to 10.4.10, with NO optional packages .................. 3.1 GB
    Erase & Install Leopard 10.5.0 with NO optional packages ............... 6.6 GB
    SoftwareUpdate (11/11, immediately after Leopard install) ............. 6.7 GB
    Install Xcode SW development tools from Leopard DVD ................. 10.1 GB
    Install & SoftwareUpdate iLife'08 (except iWeb & GarageBand) ....... 12.3 GB
    SoftwareUpdate to Leopard 10.5.1.................................................. 12.5 GB
    IMO, 250 GB is FAR more than you'll ever need for installable software plus
    a sizeable collection of music/photos. OTOH, no amount of disk space will
    ever be enough for an avid music/photo/video junkie, and everyone should
    have an external backup drive. So, stick with the standard internal drive and
    buy more external storage.
    ...a billion here, a billion there -- and pretty soon you're talkin' 'bout alot of money,
    Looby

Maybe you are looking for

  • External Hard drive crash - lost all music

    The external hard drive where I store all of my iTunes music crashed today and the only other copy of it is on my iPod. Is there any way I can set up my iPod to transfer the music back to my hard drive without losing it? My iPod is set to sync automa

  • How do I get a mis-shapen mini-disc out of my drive?

    Help! My husband put a mini-CD, looked about 2-1/2 to 3 inches in diameter and like someone slightly squished it in the middle, into the disc drive of our iMac. We cannot get it out! We've tried toothpicks, tweezers, etc. but nothing fits in and can

  • IWork Compatibility with Mac/iPad/PC

    I have a MacBook Pro and iPad 2 for home use and PC at work (grr). I'd like to buy iWork bc it's compatible with both my Mac/iPad. My question is will I be able to edit Word/Excel docs that originated from my work PC in iWork on my home computer and

  • Time Machine "Delete all Backups" doesn't recover space

    I recently deleted several iDVD and iMovie projects (>12GB) and disk images (4GB). Thinking I would recover all this HD space, I entered Time Machine, selected an old version of that file that TM had backed up, and then used the "Delete all Backups"

  • How to clean slot-load drive?

    I have a small issues that appears to not be software related. I am not exactly tech-savvy when it comes to apple products, thus I have had a hard time finding a solution. Basically, I have problems ejecting discs. Firstly, no matter what method of e