Howto integrate rman 9 with legato networker 6

Hi,
I have the following on one node:
SUN os 5.9
Legato Networker 6.1.3 (client)
oracle server 9.2.0.5
How can I integrate rman with legato networker? Which is the library needed?
thanks in advance,
Fernando

Hi,
many thanks for the info. I've created the symbolic link, but when I make a backup to sbt, rman says:
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of allocate command on T1 channel at 12/15/2008 14:42:01
ORA-19554: error allocating device, device type: SBT_TAPE, device name:
ORA-27211: Failed to load Media Management Library
Additional information: 2
I also tried with sbttest:
The sbt function pointers are loaded from libobk.so library.
-- sbtinit succeeded
-- sbtinit (2nd time) succeeded
sbtinit: Media manager supports SBT API version 2.0
sbtinit: vendor description string=BMO v3.0
sbtinit: allocated sbt context area of 536 bytes
sbtinit: Media manager is version 3.0.0.0
sbtinit: proxy copy is supported
sbtinit: maximum concurrent proxy copy files is 0
-- sbtinit2 succeeded
-- regular_backup_restore starts ................................
sbterror failed for function sbtbackup
It seems that rman cannot connect to legato's libraries.
any clue?
thanks in advance,
Fernando

Similar Messages

Problems of sap 3.02 with legato networker 7.1.3

Hi,
The first many thanks for the help.
I upgrade my server(HP-UX) with the client of legato networker 7.1.3 and sap 3.01 to the version sap 3.02. I am waiting very time to start my backups the time is excesive.The storage node is a HP-UX server.
With the old version of SAP 3.02 was perfect, the start of backup was very fast.
Can I resolve this problem? what is the solution?
Rgds...
Antonio
[email protected]

I forgot the next information:
When I launch my backups i must wait 1 hour for the start of it, this happen after
upgrade to the version sap 3.01 to sap 3.02.
The process has the next steps:
1.- the server netwoker send information to storage node (OK).
2. the storage node send information to client (OK).
3. client operating on Oracle BBDD (slow, one hour)
4.- backup runs ok.
do you undestand me the question? Can yo help me please?.
Rgds....
Antonio

How do I backup shared folders in SIMS 4.0 with Legato NetWorker?

They are not included in backup directory structure by 'mkbackupdir' tool.

Hi Strontium90,
Thanks for your reply!!
I tried your command, but unfortunately i got the following error msg:
"too many command-line arguments (first is "devicemgr_v2m0")
Try "pg_dump --help" for more information."
Please correct me if I'm wrong: assuming command was successful, I should've seen 'profileManager.sql' file at my desktop(output path = ~/Desktop/) which is the Profile Manager's database file I guess, right? and where is the restoration path located? in case I want to restore Profile Manager's database with the created backup file('profileManager.sql').
Also you mentioned: "Automate to perform daily", how can I automate this command?
Thanks a lot for your support!
Have a nice day.
Yours sincerely,
Daniel Adler.

Rman and legato networker

I have an installation of oracle 8i on AIX, and legato networker 6.1.1.
I need to link the legato networker 6.1.1 to oracle so that I can trigger rman backups.
The liblsm.a provided in the installition cd of oracle is for version 5.5 as documented in the installation notes for AIX. What must I do for legato 6.1.1 ?
Thanks for your help

A "restored" controlfile can be from either of
a. An RMAN Backup (ie a backup created by a BACKUP CONTROLFILE command in RMAN or CONTROLFILE AUTOBACKUP)
b. A manual / scripted Binary Backup (one created with the SQL command "BACKUP CONTROLFILE TO filename")
c. A controlfile recreated from a script (eg where the script was generated by the SQL command "BACKUP CONTROLFILE TO TRACE ")
In the first two cases, the restored controlfile also contains information about RMAN Backups made as of upto the point of the controlfile backup . Therefore, even in the absence of an RMAN Catalog, such a controlfile can be used to issue RESTORE DATABASE commands -- it can only restore from backupsets that it knows -- backupsets that were "registered" into the controlfile before the controlfile backup was made.
In the third case, since the controlfile is recreated afresh, it has NO "knowledge" of database backups (backupsets). A simple "RESTORE DATABASE" cannot be used. Either backupsets must be re-registered into this controlfile with the "CATALOG" command OR an RMAN Catalog must be used (as the Catalog has information about Database Backups and the names of the backupsets containing these backups).
Hemant K Chitale
http://hemantoracledba.blogspot.com

Legato networker 6.1.1 and rman

I have an installation of oracle 8i on AIX, and legato networker 6.1.1.
I need to link the legato networker 6.1.1 to oracle so that I can trigger rman backups.
The liblsm.a provided in the installition cd of oracle is for version 5.5 as documented in the installation notes for AIX. What must I do for legato 6.1.1 ?
Thanks for your help

Iphone 5 telefonlarının 6.1.3 ve 6.1.4 yazılımlarında, telefon kilitliyken kısa yoldan kamerasını açıp çekim yaptığınız sırada, gelen aramayı cevaplayıp kapattığınız anda telefon tamamen kilitleniyor. hiçbir şekilde ekran ve menü tuşu çalışmıyor. sadece açma kapama düğmesinde kapamayı aktifleştirip vazgeç dediğinizde düzeliyor.Normalde çekime devam edebiliyor olmalı.

Legato networker license ?!

SunFire V880
Sun StorEdge Autoloader L8
Sun StorEdge Enterprise Backup (Legato Networker 7.2)
Solaris 8
Oracle 9.2
Legato is successfully using for backup local file system and backup of oracle database at the remote linux server. It is also nessesary to make backup of local oracle database.
license is ok: nsradmin -c "type:NSR license: type: NSR license; name: "NetWorker Module for Oracle, UNIX Client/1"; comment: oracle; enabler code: xxxxxx-xxxxxx-xxxxxx; host id: xxxxxxxx; expiration date: Authorized - No expiration date; auth code: xxxxxxxx; Problem description: When trying to make backup the database the following error is raised: ORA-19511: Error received from media manager layer, error text: nwora_open_backup: unable to start save session with server orasrv3: The feature "NetWorker Module for Oracle, Windows Client/1" is not properly enabled for client orasrv3. Why it is querying for Windows client license? - Client and server are on the same host(solaris)! Thanks, Roman 

Some times it is as easy as configuring the client (ensuring it is Unix) and having it assigned to the appropriate schedule/pool/etc, some times you will have to specify a specific schedule, client, server in your RMAN create channel env='{..... ]' parameters. It's usually the rman channel parameters. If you can't figure it out have a look at EMC/Legato's website.

Rman backup with standby database

Hi All,
I am looking for some suggestions for rman backup with standby database with datagaurd but no active DG. I wanted to do a rman tablespace backup. but I am stuck at sql 'alter system archive log current' in rman with standby as target. which gives following errors with or without noswitch clause
RMAN> sql 'alter system archive log current noswitch';
sql statement: alter system archive log current noswitch
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of sql command on default channel at 10/05/2013 18:15:12
RMAN-11003: failure during parse/execution of SQL statement: alter system archive log current noswitch
ORA-01109: database not open
Recovery Manager: Release 11.2.0.1.0
Oracle databaes Release 11.2.0.1.0 64 bit
OS:RHEL 6 x86-64 bit
Secondly, do I need to cancel manged recovery while taking rman backups on standby.
I scanned thru MOS but could find solutions for rman with active DG.
Thanks in advance

726d07e6-b870-431f-8c22-a499c3ec4e0c wrote:
Hi All,
I am looking for some suggestions for rman backup with standby database with datagaurd but no active DG. I wanted to do a rman tablespace backup. but I am stuck at sql 'alter system archive log current' in rman with standby as target. which gives following errors with or without noswitch clause
RMAN> sql 'alter system archive log current noswitch';
sql statement: alter system archive log current noswitch
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of sql command on default channel at 10/05/2013 18:15:12
RMAN-11003: failure during parse/execution of SQL statement: alter system archive log current noswitch
ORA-01109: database not open
Recovery Manager: Release 11.2.0.1.0
Oracle databaes Release 11.2.0.1.0 64 bit
OS:RHEL 6 x86-64 bit
Secondly, do I need to cancel manged recovery while taking rman backups on standby.
I scanned thru MOS but could find solutions for rman with active DG.
Thanks in advance
"I scanned thru MOS but could find solutions for rman with active DG."
Howto make a consistent RMAN backup in an Standby database in Active DataGuard mode (Doc ID 1419923.1)

Resources needed to integrate iTunes U with existing authentication?

I have been reading the on-line and PDF iTunes U Admin guide for a few days now.
I think I can handle most administration issues, but not how to integrate iTunes U with our existing authentication system, described here http://bit.ly/7oAzpp
I believe ours is LDAP based.
Not sure other staff have the time to do it. We may have some CS students that might be able to tackle it.
As an alternative, are there outside services that might specialize in this?
Any rough amount of hours or cost?
I am looking at options, and welcome any feedback.

Frank, in answer to your questions…
Frank Fulchiero wrote:
1. What technologies does one have to be familiar with to write up iTunes U authentication with existing authentication systems? In the sample download, there are files in C, Java, Perl and Python. Do you need to know all of these, in addition to HTML?
You do not need to know any particular language…Apple's examples are just starting places. Each of those code samples does exactly the same thing, just in a different language. In addition to the samples that Apple provides, others have written similar code samples in languages like C#, VB.Net, and Ruby. "In principle", you could use a language not yet explored by others (say Erlang or Haskell or whatever)…but you would need to do pretty much what the other code samples do.
If I had to give a rough summary of what you would need to know to implement an iTunes U portal, it'd run like this:
1. You need to be able to setup a web server. It can be any sort of server with which you are most comfortable…IIS in Windows, Apache running on Linux, or OS X Server's web server (which is also Apache)…or even something else.
2. You need to know how to get CGI running on your chosen web server. The actual CGI code can be in any language you like (Apple's samples are in Perl, C, Python, etc., as you pointed out). But you need to know how to get CGI code installed and working on your web server. In addition, you need to know just enough about how the code works to adapt it to suit your specific institution.
3. You need to know just enough about how authentication works at your site to access it in code. "Usually" this is fairly straightforward…but Apple's code samples do not show how to do this—they can't because every institution handles authentication differently…some use LDAP, others Active Directory, some use Banner…others use things like eDirectory—each of these packages gives you a way to determine with a login or bind is going to work.
Frank Fulchiero wrote:
2. We are considering pilots with only a few faculty and 50-100 students. I am wondering if it would be any easier, in order to get started, to use OSX Server 10.6' Users and Groups and Open Directory for authentication, instead of our college's AD, and just manually enter the users. Due to security concerns, our network admins might find this more acceptable.
Certainly that would work. One of the nifty things about iTunes U is that you're not married to any solution you implement…you can always change/grow into something different later.

Tape rotation on EBS 7.2 Legato Networker

I have Sun Enterprise Backup Software aka Legato Networker 7.2 with autochanger.
How to make scheduled tape rotation?
Every weekday a new tape should be loaded.
Peter

A bit strange.
Just removing and adding Networker packages again solved the problem.

Unable to Integrate UCCX 9 with SocialMiner 9

Hi All,
I am unable to integrate the UCCX with the SocialMiner as the error message is "Unable to communicate to the SocialMiner on the IP address(Hostname) provided. Please verify whether SocialMiner is running on this IP address(Hostname) or check the network connection and make sure that SocialMiner is reachable from CCX".
As the SocialMiner is running on this IP. Please guide me.
Regards,
Durraze Khan
UCCE Support Engineer

Hi All,
After doing the latest patch for the SocialMiner i have integrated the UCCX 9 with the SocialMiner 9 now i am able able to Pull the agents from the Active Directory to the SocialMiner Please guide me that how to rectify this issue, looking forward to hear from you.
Best Regards,
Durraze Khan

RMAN Integration with Tap drive

Dear All,
Can any body help me how to integrate RMAN with tap on HP-Unix.
Regards,

To intergrate with RMAN, you should review the install instructions of whichever 3rd party backup software you are using. After you have the software integrated, you can refer to Configuring RMAN to Make Backups to a Media Manager.

RMAN exited with return code '3' ?

I get message bellow while oracle backup to the tape.
(2960) Launching backup process
(2960) Backup process failed: RMAN exited with return code '3'.
(2960) nwora_nsrnmostart_rman: RMAN script execution is not successful. RMAN exited with return code '3'.
There is no description for the code '3'. I think it is networker license problem but i am not sure.
Any advice ?

Thank you,
yes i am. I have 10 clients and they are working fine.
I think problem is that i have just one license of oracle module for windows. Another windows client is set and working. I can't find any documentation related to error code '3'.
a test rman script is very simple:
connect target sys/*****
connect rcvcat rman/***@vas
run {
allocate channel d1 type 'sbt_tape';
release channel d1;
I get no errors in rman. It just stops at allocate channel d1 type 'sbt_tape';
error is stored in NSR log file.

Unable to integrate Oracle Reports with Express--(To oracle Team also)

Hi
Unable to integrate Oracle Reports with Express. While defining
the Express database connection using the olap connection editor
iam getting the following error "Error locating the XCONEDIT.INI
file. Try re-installing the software".
what should be done?
Atleat,If anybody has successfully connected to Express via
Reports6i. Kindly give the details like what softwares to be
installed in what HOME? and also other steps involved in the
process.
YOur help !!!
kindly respond...(Oracle Team do respond with something)
with rgds

hello,
check out the notes
Note:112542.1
Note:167049.1
on oracle metalink for further information.
if you still have issues, please contact oracle support services
for furhter assistence.
regards,
the oracle reports team --pw

How to integrate RFSG driver with sampling theorem labview code

hi all,
I got the labview code of sampling theorem from labview-> find examples. How can I integrate this code with PXI system? How can I integrate the RFSG driver with labview code?

Hi Nieman,
LabVIEW 2014 should be compatible with the 9068 and the cRIO 2.1 drivers. I verified it should work as expected earlier today. Please make sure you are using the example cRIO PN-IO Device when you are moving the module over to the new target. If you are already accessing that, please navigate to this folder:
<Program Files>\National Instruments\LabVIEW 2014\Targets\NI\FPGA\cRIO\other
Please let me know if you see a CS_cRIO-PNAD folder. This folder provides all the files necessary to discover and use the module in the project. If we do not have that folder there, we will be unable to locate the module. If that is indeed the case, then it may be the driver did not install correctly.
If after finding this folder and it is still not working, please send me screenshots of the error that you are seeing and a MAX Technical Report. Thanks!
Matt S.
Industrial Communications Product Support Engineer
National Instruments

HT4528 My apps store will not go online with verizon network, but on wifi it works. I am on an iphone 4, verizon. I tried to do a complete, backup and restore on the phone 1 day before i noticed this problem, The backup finished the RESTORE would fail c

My apps store will not go online with verizon network, but on wifi it works. I am on an iphone 4, verizon. I tried to do a complete, backup and restore on the phone 1 day before i noticed this problem, The backup finished but the RESTORE would fail I had an error, could not access Apple server ( some server name I cant remember).
I have plenty of space available on the iphone,
8gb free,
ios version- 6.1.3 ( 10B329)
carrier - Verizon 14.0
Modem Firmware - 3.0.04
Can someone help.
I tried doing my backup restore on the same computer as I once did a year ago. and THis time I cant do the restore on the iphone.
computer osx is 10.5.8
itunes version 10.
I do not wish to go to ios 7 at this time.

Settings > General > Reset > Reset Network Settings.
Basic troubleshooting is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.
If the issue continues, contact the carrier to troubleshoot the network connectivity issues.

Howto integrate rman 9 with legato networker 6

Similar Messages

Maybe you are looking for