Howto run Distiller in unsafe mode?

Hi,
I have to convert a Postscript file into PDF which, during the distillation process, creates and writes to intermediate, named text files using the
filename (w) file
Postscript operator. However, this requires Distiller to be run in unsafe mode. Otherwise an `invalidfileaccess' error is raised. Ghostscript provides the `-dNOSAFER' command line option for this purpose. Does there exist an equivalent option for Distiller as well?
Thanks for your suggestions. Regards,
Alexander Grahn

Unfortunately option /F doesn't seem to have any effect, because Distiller (7.0) still issues the error message:
  %%[ Error: invalidfileaccess; OffendingCommand: file ]%%
Stack:
(w)
(lorenz.dat)
/statefile
%%[ Flushing: rest of job (to end-of-file) will be ignored ]%%
%%[ Warning: PostScript error. No PDF file produced. ] %%
Alexander

Similar Messages

  • Flash Player won't Run in Unsafe Mode anymore

    Hi everyone,
    Yesterday I installed this new version of Safari (6.2), but it ended up breaking Flash Player and the ability to run Flash in Unsafe Mode. "Why would I want to run it in unsafe mode?" you might ask. I use Hear an EQ to improve the audio quality, and the only way to make it work with Safari and Flash Player is by using it in Unsafe Mode. And that's another reason why I still use ML, because Mavericks is so sandboxed that Hear won't even work on the system sounds, like Alerts and Quick Look.
    If anyone have a solution to this, I more then appreciate your help. If there is no solution, could you send me the link to the old version of Safari and how to downgrade? I think the old version is the 6.1.2, not sure.
    Thank You,
    Jake.

    It's installing correctly if it's in your Add-ons manager. The "plugin" is 6mb. The rest is WAY bigger.
    See:
    The rest of the problem ISN'T with Flash Player. It's with IE11.
    This is a known problem with Internet Explorer 11, which Microsoft has been aware of since October 18 when they released their latest "untested" browser. The pages can't recognize the browser, so they don't recognize any of the plugins, like Flash Player. So far, Microsoft has made NO indication that they have any plan to fix it soon.
    Microsoft's recommendation is to use Compatibility View for affected pages, and "pretend" you're using an different browser. Trouble with that is it has seen limited success at best, and you have to individually enable it for EVERY page that has problems.
    I'm not big on "pretending" so I recommend actually using another browser.
    Firefox (from Mozilla)
    Opera (from Opera)
    Safari (from Apple)
    Chrome (from Google)
    ANY of those will work where IE11 won't, with the Flash Player Plug-in (For all other browsers), and Chrome doesn't even need that because it has its own Flash Player plugin built in.

  • Connect add-in crashes with 'plugin failure' when I click volume controls F11 or F12 On MAC OSX 10.9.5. Latest add-in installed and set to run in unsafe mode

    I am running Adobe Connect on a MAC using OSX 10.9.5 and have just installed the latest version of the add-in ( 11.9.971.247) to try to fix the problem. Every time I adjust the volume with F11 or F12 I get a white screen and the message 'Plug-in Failure'. I have also set the add-in to run in Safari in 'unsafe mode' but this has not fixed the problem.
    I've been running Connect on this MAC for many months now without the problem but cannot understand why it has suddenly started. Any help or ideas would be gratefully appreciated.
    Thanks - Chris

    Thanks again. I finally found the answer and it is working in Safari and Chrome
    First I updated Flash Player to the latest version (not sure whether this was required)
    Then I found that even though the add-in was installed that Connect was not using it, as all the browser tabs were still showing, and adjusting sound was crashing the program.
    I deleted the add-in directory from ~/Library/Preferences/Macromedia/Flash Player/www.macromedia.com/bin/connectaddin
    I deleted the add-in directory from ~/Library/Preferences/Macromedia/Flash Player/www.macromedia.com/bin/adobeconnectaddin
    Then I restarted the meeting and created a new Pod and Selected 'Share my Screen'
    This forced the add-in to download and install.
    Adobe Connect now starts from the add-in and not the browser
    Many thanks for your Help Sameer
    Chris

  • Adobe Flash only works when I run Firefox in Admin Mode

    As the title says, I need to run Firefox in admin mode each time for Adobe Flash to work.
    When I do not run it in admin mode, and I visit say Youtube, the box where the flash player should appear flickers and just does not load. The HTML5 version eventually loads instead.
    When I visit the adobe flash test page it does not work either. Only when I run in admin mode it works fine.
    Problem is I do not want to run Firefox in Admin mode for security reasons each time I use the browser. I have tried reinstalling mozilla, disabling all plugins/extensions, reinstalling adobe flash several times.
    I DO NOT have this problem when using Google Chrome.
    Any help would be greatly appreciated!
    Kind Regards,
    Skanza

    Hi skanza,
    Did you try to reset firefox as explained in the following howto [https://support.mozilla.org/en-US/kb/reset-firefox-easily-fix-most-problems here] ?

  • Get a Report crashed error while running report using the mode character

    Hello,
    I'am getting an "Enable to run report - Report as crashde" issue only when I'am running reports using the mode character. The same report with desformat pdf never has any problems. I have changed the englife (set to one) increase the cachesize but I still have the same issue.
    I'm using report 6i and Oracle 8i.
    Thanks in advance for your help.
    Regards,
    Laurent.

    Hi Thanks for the response,
    In fact the report in character mode is working fine in my environnement but is not working on my customer environnement (which is supposed to be the same as mine). I was thinking of cache size issue or something like this ?
    Regards,
    Laurent.

  • Can't Run program in Debug Mode

    To: [email protected]
    cc:
    Subject: Can't Run program in Debug Mode
    Has anyone else experienced this problem? We have written a non-express
    program that uses the Express generated services project as a supplier
    plan. However, when we try running this program in debug mode about 50%
    (or more) of the time we abend while Forte is trying to partition the
    application. Since we have many database classes in our Business Model we
    are wondering if Forte is timing out during the partition phase or if the
    server partition is running out of memory . The following error messages
    are produced by Forte. Any suggestions???
    =======================
    Error messages on client:
    =======================
    SYSTEM ERROR: Unable to start the partition testacadprogoffer_CL0_Part1 on
    any
    of the nodes to which it has been assigned. See the remainder of the
    error
    stack for more information.
    Class: qqsp_ResourceException
    Error #: [1602, 593]
    Detected at: qqcf_StandardConfig::LoadRemotePartition at 5
    Last TOOL statement: method overview.StartApplication
    Error Time: Tue Dec 02 12:56:01
    Exception occurred (locally) on partition "Express_cl7_Client",
    (partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
    taskId =
    [F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in application
    "FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
    CentralEnv.
    SYSTEM ERROR: Unable to start partition testacadprogoffer_CL0_Part1 on node
    admin2.
    Class: qqsp_ErrorDescriptor
    Error #: [1602, 592]
    Detected at: qqcf_StandardConfig::LoadRemotePartition at 3
    Error Time: Tue Dec 02 12:56:01
    Exception occurred (locally) on partition "Express_cl7_Client",
    (partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
    taskId =
    [F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in application
    "FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
    CentralEnv.
    SYSTEM ERROR: Lost contact with remote server while trying to load
    partition
    testacadprogoffer_CL0_Part1. Check server log file for more information
    about
    the specific problem.
    Class: qqsp_ResourceException
    Error #: [1301, 102]
    Detected at: qqem_IPartitionAgent::Startup at 5
    Error Time: Tue Dec 02 12:56:01
    Exception occurred (locally) on partition "Express_cl7_Client",
    (partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
    taskId =
    [F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in application
    "FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
    CentralEnv.
    INFORMATION: The connection to the partner was terminated by the
    Communication
    Manager for the reasons below.
    Class: qqsp_DistAccessException
    Detected at: qqdo_PartitionMgr::StopLocation at 1
    Error Time: Tue Dec 02 12:56:00
    Distributed method called: qqrt_ForteExecAgentProxy.LoadPartition!6
    (object name Unnamed) from partition "Forte_Executor", (partitionId =
    F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9, taskId =
    [F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9.229]) in application
    "FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment CentralEnv
    Exception occurred (locally) on partition "Express_cl7_Client",
    (partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
    taskId =
    [F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in application
    "FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
    CentralEnv.
    INFORMATION: Network partner closed connection. This usually means the
    process at the other end of the wire failed. Please go look there and
    find
    out why.
    Class: qqsp_DistAccessException
    Detected at: qqcm_HoseFSM::ReceivedClose at 2
    Error Time: Tue Dec 02 12:56:00
    Exception occurred (locally) on partition "Express_cl7_Client",
    (partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
    taskId =
    [F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in application
    "FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
    CentralEnv.
    INFORMATION: Received close: Connection aborted (10053).
    Class: qqsp_DistAccessException
    Detected at: qqcm_HoseFSM::ReceivedClose at 1
    Error Time: Tue Dec 02 12:56:00
    Exception occurred (locally) on partition "Express_cl7_Client",
    (partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
    taskId =
    [F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in application
    "FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
    CentralEnv.
    =======================
    Log messages on server:
    =======================
    Attached to manager for node admin2.
    aud Tue Dec 2 09:34:36 : Loading partition testacadprogoffer_cl0_Part2
    built on <unknown>.
    Attached to manager for node admin2.
    aud Tue Dec 2 09:41:58 : Shutting down partition as requested.
    aud Tue Dec 2 09:41:59 : Unloaded partition testacadprogoffer_cl0_Part2.
    aud Tue Dec 2 09:49:44 : Loading partition testacadprogoffer_cl0_Part2
    built on <unknown>.
    Attached to manager for node admin2.
    aud Tue Dec 2 10:00:11 : Shutting down partition as requested.
    aud Tue Dec 2 10:00:12 : Unloaded partition testacadprogoffer_cl0_Part2.
    aud Tue Dec 2 10:18:34 : Loading partition testacadprogoffer_cl0_Part3
    built on <unknown>.
    Attached to manager for node admin2.
    aud Tue Dec 2 10:27:00 : Shutting down partition as requested.
    aud Tue Dec 2 10:27:00 : Unloaded partition testacadprogoffer_cl0_Part3.
    aud Tue Dec 2 10:47:03 : Loading partition
    EvaluateApplRequirementsBO_CL0_Part1 built on <unknown>.
    Attached to manager for node admin2.
    aud Tue Dec 2 11:09:26 : Shutting down partition due to failure of agent
    owner's partition.
    aud Tue Dec 2 11:09:26 : Shutting down partition as requested.
    aud Tue Dec 2 11:09:26 : Unloaded partition
    EvaluateApplRequirementsBO_CL0_Part1.
    aud Tue Dec 2 12:36:14 : Loading partition testacadprogoffer_CL0_Part1
    built on <unknown>.
    Attached to manager for node admin2.
    aud Tue Dec 2 12:45:17 : Shutting down partition as requested.
    aud Tue Dec 2 12:45:17 : Unloaded partition testacadprogoffer_CL0_Part1.
    FATAL ERROR: Out of Memory (reason = qqOS_MM_EX_OUT_OF_MEMORY)
    FATAL ERROR: Out of Memory (reason = qqOS_MM_EX_OUT_OF_MEMORY)
    Task 11: qqcm_HoseRecvServiceTask::Run: Caught unexpected exception
    FATAL ERROR: ************* Out of Memory, requested (1K) available (0K)
    Class: qqsp_ResourceException with ReasonCode: SP_ER_OUTOFMEMORY
    Detected at: qqos_MemoryManager
    Error Time: Tue Dec 2 12:49:01
    Exception occurred (locally) on partition "Forte_Executor",
    (partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10f3, t
    askId = [F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10f3.11]) in application
    "Forte Runtime", pid 14020 on node admin2 in environ
    ment CentralEnv.
    FATAL ERROR: ************* Out of Memory, requested (1K) available (0K)
    Class: qqsp_ResourceException with ReasonCode: SP_ER_OUTOFMEMORY
    Detected at: qqos_MemoryManager
    Error Time: Tue Dec 2 12:48:57
    FATAL ERROR: Out of Memory (reason = qqOS_MM_EX_OUT_OF_MEMORY)
    FATAL ERROR: Out of Memory (reason = qqOS_MM_EX_OUT_OF_MEMORY)
    ERROR: TMgr.RunThread: task cm.Recv failed terminating.
    Probably caused by a FATAL exception.
    David Wilbur email: [email protected]
    University of Windsor phone: 519-253-3000 ext. 2779
    Windsor, Ontario Canada
    -----------------------------------------------

    Hi,
    We have had the same problem in a non-express application
    with a heavy server partition. In our case, the error was not
    systematic, depending on the server workload at the time we
    tried to partition and run.
    The work-around we're using is to put the -fm flags (increasing the x
    parameter to say 30000) in the 'server arguments' of your server
    partition
    properties in the partition workshop. Note that if your server is a Unix
    platform,
    you need to put double-quotes before and after the parenthesis in the -fm
    syntax.
    Hope this helps,
    Vincent Figari
    BTW, what Forte version are you using ?
    On Tue, 2 Dec 1997 13:44:24 -0500 "David Wilbur"<[email protected]>
    writes:
    >
    >
    >
    >
    >
    To: [email protected]
    cc:
    Subject: Can't Run program in Debug Mode
    Has anyone else experienced this problem? We have written a
    non-express
    program that uses the Express generated services project as a supplier
    plan. However, when we try running this program in debug mode about
    50%
    (or more) of the time we abend while Forte is trying to partition the
    application. Since we have many database classes in our Business
    Model we
    are wondering if Forte is timing out during the partition phase or if
    the
    server partition is running out of memory . The following error
    messages
    are produced by Forte. Any suggestions???
    =======================
    Error messages on client:
    =======================
    SYSTEM ERROR: Unable to start the partition
    testacadprogoffer_CL0_Part1 on
    any
    of the nodes to which it has been assigned. See the remainder of
    the
    error
    stack for more information.
    Class: qqsp_ResourceException
    Error #: [1602, 593]
    Detected at: qqcf_StandardConfig::LoadRemotePartition at 5
    Last TOOL statement: method overview.StartApplication
    Error Time: Tue Dec 02 12:56:01
    Exception occurred (locally) on partition "Express_cl7_Client",
    (partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
    taskId =
    [F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in
    application
    "FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
    CentralEnv.
    SYSTEM ERROR: Unable to start partition testacadprogoffer_CL0_Part1 on
    node
    admin2.
    Class: qqsp_ErrorDescriptor
    Error #: [1602, 592]
    Detected at: qqcf_StandardConfig::LoadRemotePartition at 3
    Error Time: Tue Dec 02 12:56:01
    Exception occurred (locally) on partition "Express_cl7_Client",
    (partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
    taskId =
    [F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in
    application
    "FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
    CentralEnv.
    SYSTEM ERROR: Lost contact with remote server while trying to load
    partition
    testacadprogoffer_CL0_Part1. Check server log file for more
    information
    about
    the specific problem.
    Class: qqsp_ResourceException
    Error #: [1301, 102]
    Detected at: qqem_IPartitionAgent::Startup at 5
    Error Time: Tue Dec 02 12:56:01
    Exception occurred (locally) on partition "Express_cl7_Client",
    (partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
    taskId =
    [F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in
    application
    "FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
    CentralEnv.
    INFORMATION: The connection to the partner was terminated by the
    Communication
    Manager for the reasons below.
    Class: qqsp_DistAccessException
    Detected at: qqdo_PartitionMgr::StopLocation at 1
    Error Time: Tue Dec 02 12:56:00
    Distributed method called:
    qqrt_ForteExecAgentProxy.LoadPartition!6
    (object name Unnamed) from partition "Forte_Executor",
    (partitionId =
    F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9, taskId =
    [F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9.229]) in
    application
    "FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
    CentralEnv
    Exception occurred (locally) on partition "Express_cl7_Client",
    (partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
    taskId =
    [F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in
    application
    "FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
    CentralEnv.
    INFORMATION: Network partner closed connection. This usually means
    the
    process at the other end of the wire failed. Please go look there
    and
    find
    out why.
    Class: qqsp_DistAccessException
    Detected at: qqcm_HoseFSM::ReceivedClose at 2
    Error Time: Tue Dec 02 12:56:00
    Exception occurred (locally) on partition "Express_cl7_Client",
    (partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
    taskId =
    [F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in
    application
    "FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
    CentralEnv.
    INFORMATION: Received close: Connection aborted (10053).
    Class: qqsp_DistAccessException
    Detected at: qqcm_HoseFSM::ReceivedClose at 1
    Error Time: Tue Dec 02 12:56:00
    Exception occurred (locally) on partition "Express_cl7_Client",
    (partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
    taskId =
    [F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in
    application
    "FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
    CentralEnv.
    =======================
    Log messages on server:
    =======================
    Attached to manager for node admin2.
    aud Tue Dec 2 09:34:36 : Loading partition
    testacadprogoffer_cl0_Part2
    built on <unknown>.
    Attached to manager for node admin2.
    aud Tue Dec 2 09:41:58 : Shutting down partition as requested.
    aud Tue Dec 2 09:41:59 : Unloaded partition
    testacadprogoffer_cl0_Part2.
    aud Tue Dec 2 09:49:44 : Loading partition
    testacadprogoffer_cl0_Part2
    built on <unknown>.
    Attached to manager for node admin2.
    aud Tue Dec 2 10:00:11 : Shutting down partition as requested.
    aud Tue Dec 2 10:00:12 : Unloaded partition
    testacadprogoffer_cl0_Part2.
    aud Tue Dec 2 10:18:34 : Loading partition
    testacadprogoffer_cl0_Part3
    built on <unknown>.
    Attached to manager for node admin2.
    aud Tue Dec 2 10:27:00 : Shutting down partition as requested.
    aud Tue Dec 2 10:27:00 : Unloaded partition
    testacadprogoffer_cl0_Part3.
    aud Tue Dec 2 10:47:03 : Loading partition
    EvaluateApplRequirementsBO_CL0_Part1 built on <unknown>.
    Attached to manager for node admin2.
    aud Tue Dec 2 11:09:26 : Shutting down partition due to failure of
    agent
    owner's partition.
    aud Tue Dec 2 11:09:26 : Shutting down partition as requested.
    aud Tue Dec 2 11:09:26 : Unloaded partition
    EvaluateApplRequirementsBO_CL0_Part1.
    aud Tue Dec 2 12:36:14 : Loading partition
    testacadprogoffer_CL0_Part1
    built on <unknown>.
    Attached to manager for node admin2.
    aud Tue Dec 2 12:45:17 : Shutting down partition as requested.
    aud Tue Dec 2 12:45:17 : Unloaded partition
    testacadprogoffer_CL0_Part1.
    FATAL ERROR: Out of Memory (reason = qqOS_MM_EX_OUT_OF_MEMORY)
    FATAL ERROR: Out of Memory (reason = qqOS_MM_EX_OUT_OF_MEMORY)
    Task 11: qqcm_HoseRecvServiceTask::Run: Caught unexpected exception
    FATAL ERROR: ************* Out of Memory, requested (1K) available
    (0K)
    Class: qqsp_ResourceException with ReasonCode: SP_ER_OUTOFMEMORY
    Detected at: qqos_MemoryManager
    Error Time: Tue Dec 2 12:49:01
    Exception occurred (locally) on partition "Forte_Executor",
    (partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10f3, t
    askId = [F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10f3.11]) in
    application
    "Forte Runtime", pid 14020 on node admin2 in environ
    ment CentralEnv.
    FATAL ERROR: ************* Out of Memory, requested (1K) available
    (0K)
    Class: qqsp_ResourceException with ReasonCode:
    SP_ER_OUTOFMEMORY
    Detected at: qqos_MemoryManager
    Error Time: Tue Dec 2 12:48:57
    FATAL ERROR: Out of Memory (reason = qqOS_MM_EX_OUT_OF_MEMORY)
    FATAL ERROR: Out of Memory (reason = qqOS_MM_EX_OUT_OF_MEMORY)
    ERROR: TMgr.RunThread: task cm.Recv failed terminating.
    Probably caused by a FATAL exception.
    David Wilbur email: [email protected]
    University of Windsor phone: 519-253-3000 ext. 2779
    Windsor, Ontario Canada

  • How to know that a form is running in query-only mode

    I have a form that can run in query-only mode or non-query-only mode depending on the current user who logs in, and I want to change its apprearance dynamically when it's in different modes (for example, enable or disable buttons). Is there a built-in or system variable from which I know that the form is running in query-only mode or not?
    Thanks,
    Shu

    The global variable solution is what we are using now. I thought there are some unpublished built-in or system variables. In my application, there is a public "menu" form from where hundreds of forms are CALLed with some in query-only mode and some in non-query-only mode depending on the current user role. :PARAMETER.QUERY_ONLY will always be 'NO' because the "menu" form is started in non-query-only mode. But it's good to know about it.
    Thank you very much for your replies,
    Shu

  • How to run in 32 bit mode on a mac 10.6.7 so I can use Rapport Trusteer

    The security software Rapport Trusteer for HSBC bank has just been updated to run on Firefox 4 but will only run in 32 bit mode, I am using Snow Leopard 10.6.7. How do I change Firefox 4 to run in 32 bit mode?

    You're welcome

  • For BPC how to enable Wow6432 compatibility to run in 32 bit mode on the 64

    Dear friends
    I am going to install BPC 7.0 so I want to  enable following issues on my windows OS 64Bit
    "If you run this on 64 bit hardware, you must configure it to enable
    Wow6432 compatibility to run in 32 bit mode on the 64 bit system"
    can any tell me solution as soon as possible
    regarads
    krishna
    Edited by: krishna murthy on Feb 24, 2010 11:24 AM

    hi,
    as you read, your BPC was designed for NET1.1 which build under 32bit platform while NW AS ABAP needs 64 bit environments to run. wow3264 is to enable your 32 bit application to run on 64 bit platform in this case BPC NET component can run on 64 bit. wow3264 is windows registry keys. so you can find it in the registry value using regedit.msc.
    may this help you.

  • Error when running netca in silent mode

    I found a type-o in Oracle's documentation for running netca in silent mode. See link:
    http://download-west.oracle.com/docs/html/B10811_05/app_nonint.htm#BABJFJID
    There is a line that reads:
    $ORACLE_HOME/bin/netca /silent /responsefile=/local_dir/netca.rsp
    However, it should read:
    $ORACLE_HOME/bin/netca /silent /responsefile /local_dir/netca.rsp
    Hope this saves you all lots of headaches!
    --Julie Johnson

    user8909477 wrote:
    i am running netca command in linuxGreat. But WHICH Linux???? Surprisingly it makes a difference. Just like asking to talk to a person, and specifying by family name, you might get the mother, the father, the son - and each might give a different response.
    >
    in /u01/oracle/TEST/db/tech_st/11.1.0/network/admin
    i am going to TCPs litener with port 2484.
    following error is appeared
    so please Guide me to solve this problem.
    Oracle Net Services Configuration:
    Xlib: connection to ":0.0" refused by server
    Xlib: No protocol specified
    Are you logging on as root? Are you SU'ing to Oracle or trying to run as riit?
    Try logging out - all the way out. Don't stop there, you need to log ALL the way out.
    And then log in as user Oracle.
    Logging in as root causes all sorts of headaches. Only SU to root, and then only when you absolutely need it.
    Now that you have logged out of root, and logged in (not just su'd) to oracle, what happens??

  • Running in 64 bit mode with the 32 bit Oracle client installed

    I have seen many postings on this issue but none of the suggested solutions have helped me.
    I am running visual studio 2010 professional with SP1 on windows 7 64 bit machine. When I try to run a web service locally and call it with SoapUI, I get the following error message during OracleConnection.Open().
    Attempt to load Oracle client libraries threw BadImageFormatException. This problem will occur when running in 64 bit mode with the 32 bit Oracle client components installed.
    I have tried setting up the build configuration and the project settings to target 32 bit but that has not helped. I have also tried removing the reference to System.Data.OracleClient that shows being under Program Files (x86) and add a new reference to the dll under GAC_64. That too did not work.
    I only have the 64 bit client installed on my machine.
    Any help will be appreciated.
    Thank you

    1. Visual Studio any version is 32 bit ONLY irrespective of hardware or OS bits.  So to DEVELOP with Oracle Client you MUST install 32 bit Oracle ODAC components. Task manager will show devenv.exe *32 (to confirm 32 bit Visual Studio application).
    2. You can run your web application inside IIS/IIS Express in your PC which independently can be either 32bit or 64bit.  If it is 64 bit, you MUST also install 64 bit Oracle ODAC components which means you'll have to install both 32bit and 64bit in your 64 bit Win7 running on 64bit hardware.
    3. In Visual Studio if you compile with "AnyCPU" as target, the resultant binaries (Web/NonWeb) can be both 32bit or 64bit.  So if target PC is "AnyCPU" or "x64", you MUST install Oracle ODAC 64 bit in the target OS if that target OS is 64bit.  You don't have to install 32bit ODAC in the target PC.
    4. One more catch to above scenario is the target OS could be 64bit simulated OS on a 32bit hardware. In such case you MUST install both 32bit and 64bit ODAC components.
    So while you ask your network team to download ODP.NET/ODAC Components make sure you ask them to download both 32bit and 64bit. Total nearly 600MB.
    Hope this helps many people out there.

  • Error Message--ITunes runs in 64-bit mode. Uncheck the Open in 32-bit mode in Get info for ITunes. However it is UNCHECKED. I cannot access itunes at all.What now?

    Error Message--ITunes runs in 64-bit mode. Uncheck the Open in 32-bit mode in Get info for ITunes. However it is UNCHECKED. I cannot access itunes at all. What now?

    Fallout75, good catch on the eXo plugin.  To remove it, in the Finder click "Go" on the menu bar and pull down to "Go to Folder" and then type ~/Library/iTunes/iTunes Plug-ins
    When that Finder window opens, you should see an "eXo" subdirectory.  Just delete that "eXo" folder and iTunes should start without the error.

  • LOOKOUT RUNNING IN VIRTUAL XP MODE ON WINDOWS 7

    WE ARE RUNNING LOOKOUT 6.0.1 WITH DEVELOPMENTON ON A PC RUNNING WINDOWS XP.
    WE GOT NEW COMPUTERS WITH WINDOWS 7. WE LOADED LOOKOUT ON THE COMPUTERS
    UNDER THE VIRTUAL XP MODE. LOOKOUT RUNS FINE IN THIS MODE BUT I CAN'T RUN ANY OF
    THE PROGRAMS DEVELOPED ON THE XP MACHINE. I CAN DEVELOPE ON THE VIRTUAL MODE
    MACHINE AND RUN THE PROGRAMS EITHER PLACE.
    CAN ANYONE HELP?
    THANKS
    TIM

    Do you get error box? What do you see when you run the program developed on xp?
    What if you open the .lks file instead of .l4p file?
    I don't think there is any difference between the .lks file developed on XP and the one developed on virtual xp.
    Ryan Shi
    National Instruments

  • I need to run Illustrator in Rosetta Mode and the option isn't in Get Info

    Hello everyone,
    I need help. I need to run Illustrator in Rosetta Mode and the option isn't in Get Info.
    I'm using CS3 on a Mac Book Pro 2.16GHz with 2gigs of RAM. When I get info on the Illustrator App, there isn't a rosetta option.
    To be clear, I'm right-clicking on the icon in the dock, choosing 'show in finder', clicking on the Illustrator icon in there and there's no option.
    NOW, my copy of Photoshop HAS the option! It's in the general tab just over the Lock option.
    Any help would be greatly appreciated!!!
    Thanks!

    Trash your preferences for a starter.

  • "Device Manager is running in read-only mode because you are running it on a remote computer" when local

    Hello - since configuring a Windows Web Server 2008 R2 x64 to be hardened for an internet-facing deployment I receive this:
    "Device Manager is running in read-only mode because you are running it on a remote computer."
    when entering Device Manager.
    I have tried reversing the changes I have made, such as:
    - Re-adding Client for Microsoft Networks
    - Re-enabling NetBIOS over TCP-IP
    - Re-adding File and Printer Sharing
    - Disabling the Windows Firewall in all profiles (public, domain, private)
    I get no joy. It looks like a Microsoft ballsup. I'll try and use Process Monitor to have a look. Google returns only 1 page for this error.
    Luke

    Got it.
    After my changes to DHCP and static IPs the machine picked up the IP address of another server on my little home LAN. The hostname in IPCONFIG was different to the actual server computer name and so this led Device Manager to think the connection and the
    local machine were different.
    What an odd and infuriating problem. My thoughts on this are that Microsoft should be more verbose with error messages and their causes. For example, displaying the values of the assertion would help diagnose a problem; "The host-name www02.farm.brand.com
    that you are connecting from does not match the local host-name rest01.dev.farm.brand.com. Connections from remote computers can only use Device Manager in read-only mode; some options will be disabled."
    When troubleshooting, the main thing on an engineer's mind is "what has led Windows to its [unexpected] conclusion?"
    Luke

Maybe you are looking for