HP 6180c always fails after each Apple/HP update

I have a HP 6180c All-in-One which is a lot like my old Jaguar car. When it works it is great.
My HP 6190c ALWAYS fails on scanning after EVERY Mac HP driver update. I have to uninstall (sounds like Windows) and reinstall the HP drivers, then all is well. That is until the next update, when this ritual is repeated all over. When I call HP they say to do exactly what I do and seem proud to tell me that. Anyone know of a real solution to this? Only the scan fails.

The HP updates are just like an update to iPhoto or iTunes and are not connected to any OS updates. For example, 10.6.1 didn't contain any updates to HP printers, but there was an HP update that came out around the same time.
If the OS updates are causing you problems, it could be that the printer queue is getting deleted and you just need to add the printer again from System Preferences.

Similar Messages

Errors after installing Apple security update

I installed the Apple security update released on May 11
(SecUpd2006-003Pan.dmg) last week and started having trouble with
Dreamweaver. I am currently running Mac OS 10.3.9
I receive the following errors when launching the app:
While executing onLoad in Design Notes_onOpen.htm, a
JavaScript error occured.
The following translators were not loaded due to errors:
ASP.htm: has configuration information that is invalid.
When trying to save a file, I get the following errors and
the file does not save:
While executing onLoad in _beforeSave.htm, the following
JavaScript error(s) occurred: In file _beforeSave: ReferenceError:
beforeSave is not defined.
While executing onLoad in Design Notes_onOpen.htm, a
JavaScript error occured.
If I close the file, it will prompt me to save the file and I
get those same errors, but it does save the file before closing it.
I installed the Dreamweaver 8.0.2 updater just to make sure I
had my application up-to-date, but am still getting the
errors.

Kmattingly, welcome, it is a good idea to always Repair Permissions before and after each upgrade. Bootup from the install CD (C key held down) and once the disk mounts (X window) open Disk Utility from the Main Menu under Installer. Choose your drive in the left column then select First Aid, now run the Repair, if it does not repair run it again. Now select the startup volume (with the OS) and run the Repair Permissions, quit Disk Utility.
Now go back up to the Main Menu under Install/Change Startup Disk and select your startup volume then Restart.
Joe
Power Mac G4 Gigabit Ethernet Mac OS X (10.3.9)

HELP! Can't boot after latest Apple Security Update (Released yesterday?)

The latest security update, which came out yesterday (I think it's this update: http://docs.info.apple.com/article.html?artnum=305530 ) has ravaged my Mac.
I have a PowerMac G4 Dual 1.25 MDD.
I installed the update, and rebooted like it said.
Once the computer came up, it got past the grey screen with the spinning wheel, the screen turned blue, right before it should present the login window... and then the grey (translucent) curtain slid down from the top, and a box in the center told me to hold down my power button and restart my computer.
Now this happens EVERY TIME I TURN MY COMPUTER ON.
I HAD a PERFECTLY RUNNING MAC BEFORE I INSTALLED THIS UPDATE. NOW IT'S COMPLETELY UN-USABLE.
HELP! HELP! HELP!
WHAT CAN I DO TO FIX THIS?
I'm searching for bootable discs to try to get the Mac to come up so I can look at it. I haven't tried going in through single-user-mode (command prompt) yet. I came here first, because I need support FAST!!!
By the way, before this update, I was completely up-to-date with my Apple patches/updates. I was running 10.4.9 (I don't remember the Build #, but I was CURRENT).
Thanks in advance for any support (Apple?!?!)

Ladies and Gentlemen:
Sorry for the alarming post. I'm replying to my own post to let everyone know that I don't think the problem is the Security Update alone. For lack of anything better to do, I decided to try troubleshooting this problem by myself... and here's what I did:
I booted the Mac in to Single-User mode, by holding down Command-S. Once in, I forced fsck to pass verification of the drive (fsck -fy). Then I mounted the root partition in Read/Write (mount -uw /). Once I had write access to the drive in the command prompt, I quickly decided to check out what applications and services were starting when my computer boots (/Library/StartupItems ; /Library/LaunchDaemons). From there I removed all third party applications and services. (I maintain a "StartupItems-Disabled" folder, and a "LaunchDaemons-Disabled" in the spirit of pre-OS X machines that had something similar in the System folder for extensions and control panels (if my memory serves me)... so that's where I put all the applications and services that I didn't want to boot (I moved them from the respective folders in to the "-Disabled" folders I had created).
Anyway... after removing all the third-party software and services from Startup, I rebooted, and my Mac came up just fine. I'm going to sift through the logs to see if anything was written about what happened at boot all those times. With any luck I'll figure out which application or service wasn't playing nicely with the OS and/or Security Update.
Good luck with your own endeavors. It's always scary when your Mac doesn't boot, so I hope this doesn't happen to anyone else (especially someone less technically inclined). I'll check the forums later to make sure no one else had similar problems... because I'm sure I could help them get to the bottom of their troubles.
Cheers!

Iphoto and Itunes not responding after an Apple Software Update

Hi
Afew days ago I did the Apple Software Update and since then I haven't been able to get onto my Itunes or Iphoto, both of which I use quite often. Itunes just doesn't load at all and Iphoto starts to open the page but then that multicoloured ball appears and it doesn't respond. I am just wondering why this is happening and whether it's happened to anyone else at all? Ideally I'd like to get rid of this new update but don't know how to go about it. I'm a bit of a computer dunce so if you could offer any solution in a straightforward way I would be so grateful. Thanks!

created a new user account and the same problem arose there as well.
Then you need to re-install iPhoto:
To re-install iPhoto
1. Put the iPhoto.app in the trash (Drag it from your Applcations Folder to the trash)
2. Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name
3. Re-install.
If you purchased an iLife Disk, then iPhoto is on it.
If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only...’
This process will not affect your Library of photos. However: Always back up before an operation like this.
Regards
TD

Why is there a iTunes icon with a USB cable on the screen after a Apple TV update

Why is there a iTunes icon with a USB cable on the screen after a Apple TV update

The iPad could be in recovery mode.
You may want to follow these instructions:
http://support.apple.com/kb/HT1808

Apple VPN Client fails after 10.4.7 update

I have three different remote computers that cannot connect over VPN remotely to our xServe running 10.3.9. After installing 10.4.7 update recently, all three remote computers fail to even hit the server logs (ie. no connection, no denial, no nothing on the server end). I had one machine that was running 10.4.6 tonight. VPN connection worked fine. Ran the software update, restarted, now that computer fails to make a connection.
It has nothing to do with the firewall on the xServe. I have turned that off with no success.
Any ideas? I appreciate the help.

to uninstall the client:
http://docs.info.apple.com/article.html?artnum=108021
you can create a client installer with the admin
under File, Create Client Installer...
Thanks for this. I will look into it further. The document you refer to states that 10.4 Clients should only be stopped rather than uninstalled, this concerns me a little. As I have tried simply stopping the service I will escalate to uninstalling the client and then see if reinstalling resolves the issue. Many thanks for your response.

Why is a space always added after each img ?

Hello,
I have an input TextField, in which I want to add text and images. But each time I add a new image in the textField (via an <img> tag), a space character is added after every other <img> in the TextField. Why is that ?
You can test it for yourself :
function test():void
            var tf:TextField = new TextField();
            tf.multiline = true;
            tf.text = "Hello World";
            trace("1/ tf.length", tf.length);
            trace("1/ tf.text", tf.text);
            trace("1/ tf.text.length", tf.text.length);
            trace("1/ tf.htmlText", tf.htmlText);
            trace("1/ tf.htmlText.length", tf.htmlText.length);
            var htmlText:String = tf.htmlText;
            htmlText += "<img src='image.gif' id='0'/>";
            tf.htmlText = htmlText;
            trace("2/ tf.length", tf.length);
            trace("2/ tf.text", tf.text);
            trace("2/ tf.text.length", tf.text.length);
            trace("2/ tf.htmlText", tf.htmlText);
            trace("2/ tf.htmlText.length", tf.htmlText.length);
            htmlText = tf.htmlText;
            htmlText += "<img src='image.gif' id='1'/>";
            tf.htmlText = htmlText;
            trace("3/ tf.length", tf.length);
            trace("3/ tf.text", tf.text);
            trace("3/ tf.text.length", tf.text.length);
            trace("3/ tf.htmlText", tf.htmlText);
            trace("3/ tf.htmlText.length", tf.htmlText.length);
Before the first image, the text equals "Hello World" (as expected)
Before the second image, the text is "Hello World\r "
And after the second image, it is "Hello World\r \r "
So there are two spaces after the first image. And if you add a few images in the initial htmlText, they will have two more spaces at the end of the function.
Does anybody knows why is it, how to disable this behavior, or simply fix it ?
A big thanks to the one who can help me, I'm really stuck with this.

http://help.adobe.com/en_US/FlashPlatform/reference/actionscript/3/flash/text/TextField.ht ml#condenseWhite

Nokia N80 restore always fails after SW update

Successfully upgraded unbranded Nokia N80 to the below:
V 4.0623.0.41
26-07-2006
RM-92
Nokia N80 (05)
After update tried several times to restore phone content using genuine USB cable from two backups: one fresh incl. memory card and another 1 week old just the phone. PC Suite sometimes shows successful restore, sometimes a message that not all content was restored. The phone after restore always restarts with the message: "Phone will restart". No content is restored.
SW: WinXP SP2; Nokia PC Suite 6.81.13.0
Any advice will be appreciated.

Fixed by 10.4.4

Apple Bluetooth Keyboard Fails After 10.7.3 Update

I updated to 10.7.3 48 hours ago and my Apple bluetooth keybaord does not work. My Mac Pro system is several years old and does not have an internal bluetooth. I have been using a bluetooth dongle successfully. The keyboard goes through the pairing process normally and appears connected in the System Preferences (Bluetooth) application but no characters appear when typing on the keyboard in any application. How should I start to fix this problem?

I had this problem yesterday. Today, I decided to just turn BT off and back on again, and the keyboard paired successfully. So far, so good.

My download of Firefox always fails in my Apple PPG5 10.3.9. computer

Jag misslyckas alltid med nedladdningen avFirefox på min gamla Apple Power PL G5 med 0sX 10.3.9., 256 MB ram.
HJÄLP MIG!!!!!
I mina nyare datorer fungerar det perfekt - har även försökt föra över Firefox från dem utan framgång.

The last version of Firefox that worked on OS X 10.3.9 was Firefox 2.0.0.20
The Swedish version is available from ftp://ftp.mozilla.org/pub/mozilla.org/firefox/releases/2.0.0.20/mac/sv-SE/

Flash 10 install fail after 10.6.2 update. Help please.

It all started after the new 10.6.2 update I did for Snow Leopard
I don't know if this is an something you here at adobe can fix or its something going on at Apple.
Is anyone else having this problem or is it just me?
Opera, and firefox unexpectidy quit as well.
and my wacom drivers are out of wack.
I tryed to uninstall flash player but that too unexpectidly quits.
When I try to restart it gets hung up, and I have to do a hard start to get logged into my computer again.
I ran the disk utility and repaired permissions, that didn't help.
Anyway the install failed said I should contact Adobe so here I am.

Good News I Fixed it.
So what I did was downoad and install the MacOSXUpdCombo10.6.2.dmg
Found here
http://www.apple.com/support/snowleopard/
On the left you will see the downloads, The one you want is the (combo) version.
Just as a precaution, I would recommend backups, as these little glitches are often percursers to the big fail.
I use corbonite, you can search for it on your own, or time machine ect, whatever works best for you.
Sorry I may have been rude, I have always liked Adobe products and I have no doubt that the people at Adobe are working hard to keep everything working, it must be quite hard to deal with irate customers all day.
Hope this helps some people.
Thanks again.

S.M.A.R.T status failing after 10.4.7 update. Should I be worried?

After the 10.4.7 upgrade of my iMac Core Duo, the disk utility tries to upset me (with luck) saying that my drive is failing (fatal hardware error). The system might be correct, but I doubt it. The drive seems to working OK (as far as I can tell). However, the system says to backup 'as much as possible' and replace the drive.
Is this just a software issue or is my drive really on the edge of dying?
There is a 136 Gb Mac partition, and a 15 Gb Windows partition.
The repair and verify buttons in disk utility do not work. It seems there is not much I can test.
Thanks,
Armand
IMac Core Duo 1.83 Mac OS X (10.4.6)

Check this link regarding SMART technology.
http://www.ariolic.com/activesmart/smart-technology.html
This is not something you should ignore or doubt and is not a software issue especially if the drive cannot be repaired by Disk First Aid repair and the SMART status indicates the hard drive is failing.
Apple does not manufacture hard drives and hard drives can and do fail even when new and still under warranty. I've owned a number of Macs over the years and I experienced a complete hard drive failure only once - before SMART technology was available on a G3 PowerBook. The PB was less than one year old and without any warning it happened. Apple replaced the hard drive under the standard 1-yr warranty period but foolishly I didn't maintain a backup at the time (since the computer was new) and none of my existing data was recoverable and I lost everything.
Per the SMART status warning, backup your data NOW and assuming your Mac is still under warranty, call AppleCare to have the hard drive replaced.

Web Sharing fails after 10.5.3 update

Hi there, folks. Most of the time I lurk around here and find great answers, but this time I need some help. I just upgraded to 10.5.3 and now the webserver is failing to load. I checked the console and found the following:
5/29/08 1:58:06 AM org.apache.httpd[295] httpd: aprsockaddr_infoget() failed for (insert addy here)
5/29/08 1:58:06 AM org.apache.httpd[295] httpd: Could not reliably determine the server's fully qualified domain name, using 127.0.0.1 for ServerName
5/29/08 1:58:06 AM com.apple.launchd[1] (org.apache.httpd[295]) Exited with exit code: 1
5/29/08 1:58:06 AM com.apple.launchd[1] (org.apache.httpd) Throttling respawn: Will start in 10 seconds
Repeat ad nauseam. I tried adjusting the servername (it was commented in the configuration) to localhost in etc/apache2/httpd.comf, restarted and was presented with this error:
5/29/08 2:08:55 AM com.apple.launchd[1] (org.apache.httpd) Unknown key: SHAuthorizationRight
5/29/08 2:08:55 AM com.apple.launchd[1] (org.apache.httpd[330]) Exited with exit code: 1
I'm just a PHP scripter, I don't know the details of apache configuration so kindly forgive my ignorance if I'm overlooking something obvious. It worked perfectly before the 10.5.3 update, so I'm pretty sure that it was the cause... this especially bites since I'm on a deadline.
Thanks in advance for any enlightenment you can offer!

Thanks for the defense, Carlene. Again he's chosen to insult both me and my work instead of provide any kind of useful reference. I guess someone as smart as he has nothing better to do than to play vulgar games with those of us who are less mentally matured.
At any rate, no, you don't need the tilde. Be sure you have the spelling and capitalization in the files/terminal written correctly, that the .conf file you saved was in plain-text, and that the chown command was actually successful. In theory once you restart web sharing, it will work. There are a couple of other things that I did which may or may not have had any effect:
1. A permissions check with Disk Utility.
2. Being sure "Listen 80" (or whatever port you want to use) appears in /etc/apache/httpd.conf
3. That the proper servername is listed in httpd.conf (I use "ServerName 127.0.0.1:80")
4. That you clicked reload in your browser and cleared out the cached page.
After you mess with all of this be sure to check Activity Monitor and Console to see that things are running. If httpd doesn't appear in AM after starting web sharing, you still have a problem. It doesn't hurt to try a reboot once in a while either.
Good luck!

We are no longer able to use the audio portion for ELPA testing after running apple software updates on snow leopard?

We are in the middle of OAKS TESTING. We had to run the latest Java Updates inorder to do the ELPA portion of our State "OAKS" testing. Since last Friday we cannot consistantly or basically cannot get the audio portion to work. The sound and speech works fine in system preference but no longer for the testing. It was fine last week.
Is there other school district having this issue in the state of Oregon?

When I try to do a "save as" in preview, pages, numbers, etc., there no longer is a save as in the pull down menu. If a go to help and type save as it will pop up under help - what a pain.
Save as is available in Mountain Lion by hitting the Option key while you access the File menu. (It was returned after being eliminated in Lion).
My system is running slow!
How much RAM do you have installed? Mountain Lion is somewhat of a memory hog. And, how much free/empty hard drive space do you have?
And what is Mavericks? Is that going to change everything?
Apple announced a new OS a few days ago; it is supposed to be released in the fall.
When i open softwares, like quickbooks, it tells me that my QB wants to import my contacts.
The capability to sync is a new feature. You don't need to do it. I did not allow any app to import my contacts. You can also turn off other features if you do not like them - simply go through all the System Preference Panes and decide what you want and what you don't want.

Mail.app fails after 10.6.5 update

upgraded to OSX 10.6.5 along with iTunes 10.1.1
error on launch:
11/14/10 1:28:25 PM [0x0-0x3d03d].com.apple.mail[609] dyld: Library not loaded: /System/Library/Frameworks/IMCore.framework/Frameworks/IMFoundation.framework/V ersions/A/IMFoundation
Fix:
Manually downloaded and installed OSX 10.6.5. After restart all worked fine.

Reapplied OSX 10.6.5

HP 6180c always fails after each Apple/HP update

Similar Messages

Maybe you are looking for