HP Coolsense 2.1 of HP Envy DV6T-7300

HP Coolsense 2.1 does not have any controls as 1.0 that makes my laptop be overheated. Please give me some tips or update a new version for HP Coolsense
P/S: I bought it 1 week, brand new so it does not have any problems about dirty.

Coolsense 2.0 Windows 7 64-bit download
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Similar Messages

HP ENVY dv6t-7300 QUAD: Battery Drains when Shut Down & Doesn't Charge when Battery life is 93%

My HP ENVY dv6t-7300 QUAD had battery discharge when I left it off for a few days on, so far, three occasions:
The battery fully discharged to 0% from 100% when the laptop was left off for a peroid of two weeks
The battery discharged to 95% from 100% when left off for a seperate period of three days
The battery discharged to 94% from 100% when left off for a seperate peroid of four days
These three instances did NOT come consecutively.
When the laptop is left off for one day though, the battery life is at 98% or 99%.
On all occasians, the computer was shut down from the settings tab and NOT put into sleep mode or hibernate mode.
The other issue is that on two different occasions the laptop says that the battery is not charging when the battery life is > 93%. So far, I have not seen this problem appear when the laptop was below 93% battery.
This problem is intermittent. The first time it happened, the laptop began to charge at 93% battery life and continuted to sucessfully charge until today (8/11/2013). Currently, the battery life is at 97% and the battery will not charge.
I have performed a start-up battery test and the result displayed on the start-up screen is:
Battery Check: Primary-OK (1)
The result from the HP Battery Check from the Desktop Screen says:
Status: OK (0)
Charge Capacity: 97%
This screen also says that the battery is:
Charged (97%)
Current: 0mA
Full Charge Capacity: 5458mAh
Remaining Capacity: 5319mAh
Failure ID: OK
There is also one other interesting thing about this laptop:
When HP Searches for Drivers for my laptopr, the driver detection program detects that I have an HP ENVY dv6-7398ca, not a dv6t-7300 QUAD like it states under the battery compartment.
I have had this laptop since abour June 20, 2013 and I believe the warrenty is still good on the parts.
If anyone has any suggestions on how to fix these problems, I would greatly appreciate it. Thank you.

bump? no help?

HP ENVY dv6t-7300 Quad Edition Notebook PC Cooling Fan

My cooling fan recently went out and I am not in a place to have it fixed in a timely manner. Does anyone know what kind of colling fan is in my computer?

Go through Page 29, 82-87 in this manual:
http://h10032.www1.hp.com/ctg/Manual/c03591281.pdf
Find the part number according to your product specs, search it through HP partsurfer or through online store:
http://partsurfer.hp.com/search.aspx
Regards
Visruth
++Please click KUDOS / White thumb to say thanks
++Please click ACCEPT AS SOLUTION to help others, find this solution faster
**I'm a Volunteer, I do not work for HP**

Fan error and excess heat on ENVY DV6t-7200

I have a laptop-
ENVY DV6t-1200, product#B6C70AV. Windows 8.1.
The computer is only 14 months old, so it is freshly out of warranty. I have been noticing unusually loud fan noise recently. It is not consistent. Sometimes it remains loud for my entire computing session. Sometimes it quiets down after several minutes, sometimes it is not loud at all. I'd say 75% of the time, it is loud though... And the computer gets VERY hot on the bottom left side in the area of where the fan vents are located. So hot that it almost burns to the touch after about 30-45 minutes of computer usage.
Just today, after waking laptop from sleep, I had a black screen with white text stating something to the effect that "windows detected the fan is not properly cooling the computer and may result in damage, etc.." I don't remeber exact phrase. I went to try to take a screenshot by pressing windows key and prt scrn, but the message page disappeared and normal windows 8.1 start screen appeared. The computer seems to be functioning normally. But the loud noise, the strange fan warning, and the intense heat lead me to believe I have a growing problem.
ANY ideas on what I should do at this point?

Hello Andrew01,
Thank you for posting on the HP Forums!
I understand you are experiencing a "system has detected that a cooling fan is not operating properly" error. This could be a result of faulty hardware, or a recent software implication. I apologize for the inconvenience but I will do my best to assist you! To start, please follow the troubleshooting in this document: System Fan (90b) error message on startup
Although the title of the document is "System Fan (90b) error message on startup", the troubleshooting steps presented are relevant and effective. I also provided this document because I believe this is the error that you witnessed, though it's possible that is isn't the same error. If those steps do not work, here are some other suggestions to attempt: Reducing Heat Inside the PC to Prevent Overheating
If these steps do not work, the hardware is malfunctioning. I would contact HP support, to verify what your options are, or take it to a local repair shop.
You can utilize this website to learn how to contact HP appropriately, based on your region: Contact HP Worldwide
Please let me know if you have any other questions or concerns. Thanks again for posting on the HP Forums. Have a great day!
Mario
I worked on behalf of HP.

USB Controller Missing in Device Manager (HP Envy dv6t-7200)

I have 3 USB 2.0 ports but I'm only able to use one of them. Device Manager has a yellow warning symbol next to "Universal Serial Bus (USB) Controller" and I'm unable to find any drivers. I'm not sure what chipset I have because my OS didn't come with anything downloaded, so it's missing many drivers.
Specs:
HP Envy dv6t-7200
Windows 7 Professional SP1
Intel Core i5-3210M CPU @ 2.5 GHz
This question was solved.
View Solution.

You're very welcome.
When you don't see a complete set of drivers for a selected operating system, that means HP doesn't really support that OS.
They used to not list any drivers for unsupported operating systems, so at least the partial list is better than nothing.
I know that doesn't help those who need drivers for a specific operating system, but some of us know where you can find them.

Can I upgrade my HP ENVY dv7-7300 Quad graphic card?

I've heard that most laptops graphic cards now a days can't be upgraded, but I have an HP ENVY dv7-7300 Quad and I was wondering if it is possible to upgrade its graphic card to Nvidia GT 635m?
Thanks

Hi,
Basically you can, nothing can stop you, with a cost and I believe this cost may be more expensive than buying a new computer because you have to take into account:
New card price, and WHERE you can buy it because laptop cards are not the same as desktop cards. You can't buy from any normal shop,
Need new system board (may be),
Need new cooling system because generally speaking more powerfull card pumps out more heat (you want more powerfull card don't you?).
May need new PSU because your current PSU may not suitbale to the card. (I ordered a machine with Nvidia card and I needed to order a 90W charger at the same time, not the normal 65W charger. They simply rejected my order).
Labor cost.
Many, many packets of Asprin.
Hope this helps.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Can I run a 2560x1440 monitor with the envy dv7t 7300

Can I run a 27" WQHD 2560x1440 ips monitor at full res with my Envy DV7t 7300. I7 quad 2.6 GHz, GT650m 2gb ?
Thanks, Cesar

Hi linacjsdad,
Thank you for your query, I will do my best to help.
If you connect the monitor with a HDMI connection it will support the highest resolution.
Your HD 7670M DDR# graphic card will support resolutions of 2560x1600 which is higher then the monitor, therefore you should not have an issue. Specifications of the AMD Radeon HD 7670M DDR3 GPU
HP ENVY dv7 Notebook PC Maintenance and Service Guide Please note chapter 2 pages 3 and 4.
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

HP Envy dv6t fingerprint driver for windows 7

I downgraded from Windows 8 to Windows 7 and am having a hard time finding the correct driver for the fingerprint reader. I've tried a few from Validity's site, but I can't seem to get it to work. Anyone tried the same? Suggestions?
Thank you!
This question was solved.
View Solution.

Hi
Please find the driver link given below.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-122818-1&cc=us&dlc=en&lc=en...
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

Microhphone not working on Envy dv6t

My microphone randomly stopped working. I checked in control panel and it is currently enabled. Please help!

Hello jgajch,
Thank you for posting on the HP Support Forums. I have brought your issue to the attention of an appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicaly post ( serial numbers and case details).
If you are unfamiliar with how the Forum's private message capability works, you can learn about that here.
If you have already resolved your matters, please disregard this message.
Thank you
Duane_D

Can no longer find Recovery Manager for Windows 8

I have a new HP Envy dv6t 7300 notebook. I have turned it on twice. First time I only created my computer name and user ID name and password. Second time (a few minutes ago) I activated Windows 8 and immediately went to create system recovery disks. I typed in the search box "Recovery Manager", clicked on it, and chose "Recovery Media Creation." It then gave me the message "You are only allowed to create ONE set of media recovery" to which I clicked on "I accept." It then took me to the screen that said "Please insert one of the following media". (I was following a you tube explanation of how to do this and so far everything was fine.) However, when it got to this screen, it appeared (from the you tube video), that I was supposed to click on my choice of the media I was going to use (either flashdrive, DVD, or DVDDL.) However, nothing would happen when I tried to click on "DVD". Instead, below the choices to use, the "gear" icon kept spinning, acting like it was going to do something....but it kept spinning and spinning. Since it said at the top of this screen "Please insert one of the following media", I thought maybe I needed to put in the DVD. So I did. Still nothing happened. The gear continued to spin. So I thought maybe the computer was hung. So I took out the DVD and closed out of Recovery Manager thinking I'd try again. Now, however, when I type in the search box "Recovery Manager" nothing comes up. Just the message "No settings match your search." Certainly I can still make these disks, right??? Certainly my "one" time isn't gone because I closed out. Please someone help me! Thanks
This question was solved.
View Solution.

Hello parob12,
You’re not able to create recovery media.
If it started the recovery creation, it might have counted that as the one set.
You can call HP and let them know what happened and they should send be able to send you a set.
Here is a link to the phone number.
Clicking the White Kudos star on the left is a way to say Thanks!
Let me know how everything goes.
Have a good day.

Validity fingerprint scanner not working on Windows 10

I downloaded the Validity driver from the website, but my fingerprint scanner isn't working. When I was running the Insider previews it did work and I was able to use Windows Hello. But now with the full version, it does not work. Is there an updated driver or one from another device that would work?

Your solution might depend on your particular setup. Reference:HP ENVY dv6t-7300 CTO Quad Edition Notebook PC ========================================================================Scenerio 1You have HP SimplePass installed -- and you did not say whether or not this is the case -- AND you are running (some version of) the original Series 6 HP SimplePass program that was installed (shipped) with your computer. This Series of the program may, or may not, want to run in your new Windows 10 Operating System. I have read one member's claims that Series 6 HP SimplePass, that is, HP SimplePass probably version 6.0.100.276 -- does run in Windows 10. I cannot verify that is the case. How? Reinstall the existing Validity Driver:Uninstall - do NOT delete the Driver from the Device ManagerReboot (Restart) the computer and log inCheck to make sure your Sign-Options are set in PC Settings If your Series 6 HP SimplePass program is not behaving itself, that is, the program starts and then balks, the Splash screen starts / stops / flashes / freezes, then you might try: Hard Reset / Forced Reset"Repair" the SimplePass program (Programs and Features)Tryoverloading the program, that is, installing the program over the top of itself without removing the existing program from the computer. ========================================================================Scenerio 2 You have been running Series 8 HP SimplePass. There is a new Windows 10 compatible Series 8 HP SimplePass program available:sp71729 HP SimplePass V8.01.46A W7-W10 32/64bit How? Reinstall the existing Validity Driver:Uninstall - do NOT delete the Driver from the Device ManagerReboot (Restart) the computer and log in Download and install the new Series 8 HP SimplePass programPackage will likely download to your Downloads folder >> Double-Click to installReboot (Restart) the computer and log inCheck to make sure your Sign-Options are set in PC Settings========================================================================Scenerio 3 Some odd combination of other factors not listed In any case, you want to reinstall your Validity Sensor Driver. You can likely use the Driver for Windows 8.1 you already have:sp58900 Validity Sensor V4.4.234.0 Win8-Win8.1 Windows 10 Native LogonEven if you do not wish to use HP SimplePass -- or if you have never used it and do not even have it installed -- once you have reinstalled the Validity Sensor Driver, you might check / adjust / manage your PC Settings > Accounts > Sign-in Options Windows Native logon can get you logged into the computer with your fingerprint -- so far, it cannot log you into Web Sites. Reference, Help, Tips:Instructions to Upgrade HP SimplePass Read the first page: Dragon Document Guidelines When you see a Post that helps you,Inspires you, provides fresh insight,Or teaches you something new,Click the "Thumbs Up" on that Post. Click my Answer Accept as Solution to help others find Answers.

Flashplugin keeps crashing when i play a game on facebook i have updated everything keeps saying im missing some flashplugins but i dont know which ones im missing

i have updated firefox. i have updated my adobe flashplugin, but it keeps saying im missing other plugins..i do not know what ones im missing. also firefox crashes on me too even tho it i has been updated to the newest version there is.

Hi @RicardoAlmeida ,
Welcome to the HP Forums!
It is a terrific place to find answers.
For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
I grasp that you have switchable graphics and they are not functioning corruptly.
Have you made any changes to your system?
What Operating System are you running?
Here are two document on switchable graphics.
Here is a link to the HP ENVY dv6t-7300 CTO Select Edition Notebook PC support page. You will need to select your Operating System and follow the prompts to display the drivers.
Please try these steps and let me know the results.
Download the chipset, intel graphic and amd graphic drivers and save them to your desktop.
Delete the chipset driver and install the update
Reboot your computer
Delete the Intel driver and install driver update
reboot your notebook
Delete amd driver and install the update.
You can consider contacting HP support at any time for assistance.
Please call our technical support at 800 474 6836. If you live outside the US/Canada Region, please click the link below to get a support number for your region.
World Wide Phone Support
I hope this helps.
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Hp dv6t select edition headphones not working after upgrading to windows 8.1

So I upgraded to windows 8.1 from 7 and now when I plug in my earphones there is no audio. I can still hear something when I just use the laptop speakers, just not with earphones. I also don't see the beats audio program on my laptop anymore or the hp support assisstant.

Hi @parjinder82 ,
Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue of the Beats Audio not working correctly since you did the update for Windows 8.1 on your HP ENVY dv6t-7200 Notebook. Here is a document to check some settings that might be and issue with the software.
Sometimes the updates have not completely finish. I recommend restarting the Notebook as if there are some updates that have not gone through this will finish them.
You could check what is installed by checking here:
1. Right click speaker icon (right hand corner)
2. Select Playback devices
3. Right click Speakers
4. Enable it and set as Default
5. Click Apply/Ok
You might benefit from this document on Windows updates and sound issues.
Hope this helps.
Let me know, Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

HP envy 17 dual bays

I have a HP Envy and I would like to install a SSD in one of the bays. I have followed a post on how to do it.
The post talks about a HP Envy dv7t-7300. I can't find "dv7t-7300" as a model number anywhere. Where do I find the model number?
Also what SSD do I buy, sata , sata II, or sata III?
The system serial number is [edited by Moderator], if that's helpful.
This question was solved.
View Solution.

Hi @hpuser555 ,
Thank you for visiting the HP Support Forums. I'm sorry to inform you that your post has needed some editing to remove personal information such as the Serial Number in you post. From our Rules of Participation:
Protect privacy - yours and others'. Don't share anything about yourself that you would not want to see on a road-side billboard. Don't post contact or other personal information-your own or anyone else's-or any content that you receive in one-to-one communications without the author's consent. For example, don’t post your computer’s serial # or contact information publicly, and do not allow someone you don’t know to remotely take control of your computer.
If you need people to contact you directly, either ask them to send you a private message or subscribe to the thread so you will be notified when there are replies. You may also click on your name anywhere in the forum and you will be taken to your profile page, where you can find a list of threads you have participated in.
Sharing personal email addresses, telephone numbers, and last names is not allowed for your safety. If you have any questions feel free to send me a private message in reply.
Thank you
George
I work for HP

HP Support assistant not working after upgrading to Windows 8.1

Product Name: HP ProBook 450 G1 Notebook PC
Serial number: (Personal information removed)
Product number: G1Q53UT
HP SysInfo, HP Support Assistant, HP Trust Circles, HP Client Security - none of the HP products are working since the Windows 8.1 upgrade

Hi @parjinder82 ,
Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue of the Beats Audio not working correctly since you did the update for Windows 8.1 on your HP ENVY dv6t-7200 Notebook. Here is a document to check some settings that might be and issue with the software.
Sometimes the updates have not completely finish. I recommend restarting the Notebook as if there are some updates that have not gone through this will finish them.
You could check what is installed by checking here:
1. Right click speaker icon (right hand corner)
2. Select Playback devices
3. Right click Speakers
4. Enable it and set as Default
5. Click Apply/Ok
You might benefit from this document on Windows updates and sound issues.
Hope this helps.
Let me know, Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

HP Coolsense 2.1 of HP Envy DV6T-7300

Similar Messages

Maybe you are looking for