HP LaserJet p1505n Error: Load Paper msg

I have had no problems with my year and a half old (minimally used) hp 1505n printer until recently. Now, when I click the print icon (on WordPerfect) after the Preparing Document messages flashes on and disappears a large message in a window appears on the right of my screen with a diagram of a printer depicted on it. On top of the window it says: HP LaserJet P1505n Error. In the window near the printer depiction is the message: Load Paper. However, the tray is filled with paper. The printer works if I click the OK in the message and press the print button on the printer.
One technician told me she thinks it because the printer is on Manual Feed rather than Auto Select. But when it is put on Auto Select it always returns to Manual Feed even after clicking OK.
Any solutions?
Stan

Hi there,
This article should cover the issue you are experiencing. Give the steps outlined a shot and let us know if it helps.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Similar Messages

  • Error Load Paper repeatly

    Win 7  HP PhotoSmart premium  C309g-m
    Printer has been working fine, all of sudden  receive erros  of  LOAD PAPER   over and over.
    tried diff paper
    Cleaned rollers on the back
    still  same error  and won't print
    .............te
    This question was solved.
    View Solution.

    Hi there,
    This article should cover the issue you are experiencing. Give the steps outlined a shot and let us know if it helps.
    Best of Luck!
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • Load paper in main tray on a photosmart 3210

    Paper is loaded but I still get the error: "Load Paper in Main Tray"

    Do you have the flap folded inside the envelope, so that it does not stick out?
    007OHMSS
    I was a support engineer for HP.
    If the advice resolved the situation, please mark it as a solution. Thank you.

  • Officejet 6500A Plus - Error Msg says to load paper, but paper is loaded

    If this is wrong Board, please advise. This is my first itme posting.
    I'm using my Officejet 6500A Plus wirelessly with my Toshiba Windows XP laptop and have enjoyed tremendously. Yesterday I started getting an error message when I tried to print or copy, "Load paper in printer." Paper was loaded.  I tried turning it off, and back on. I tried unplugging. I tried removing and replacing the paper many times. I even tried dusting (ha ha). I've probably had the printer less than six months.
    Appreciate the help!

    Hi Gogilgoes,
    Please go through the document below.
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02446494&cc=us&dlc=en&lc=en&product=4083977&tmp...
    Do let us know if this Document help you.
    Thanks
    Josh.C
    Click on the BLUE KUDOS button on the left to say "Thanks"
    Although I am an HP employee, I am speaking for myself and not for HP.

  • Error message on print window for Vista--"out of paper"--I just loaded paper...?

    error message on print window for Vista--"out of paper"--I just loaded paper...?
    What can I do to get it to print?

    hi there,
    could you provide the community with a little more information to help narrow troubleshooting? Things like your printer model can help out a lot.
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • HP LaserJet P4515 - error 13.05.00 Fuser Output, Paper Late Jam.

    HP LaserJet P4515 - error 13.05.00 Fuser Output, Paper Late Jam.
    I have frequent Paper Jam errors of this type during duplex jobs. Simplex jobs seem to work fine unless I try to duplex manually by printing on one side and then the other.
    When it jams, I will have one page hitting the sensors after the Pre-transfer roller, usually the next blank page from any given tray, and my duplex page, which has gone through one time and has returned for the backpage, folded in underneath or on top of itself after it passes the tranfer roller but before it hits the Fuser rollers.
    Sometimes it wil happen every other duplex page or it may allow 5 to 10 before doing it again.
    The fuser has been replaced twice, because I thought maybe the first fuser was defective.
    I have run the component tests, sensor tests and they appear to be normal.
    I need to know where I need to look next.
    Right now I am considering changing the feed guide assembly, since that is where the jamming is taking place.
    This question was solved.
    View Solution.

    The feed guide assembly was the culprit.
    The main roller connected to the gears was broken, which allowed the smaller gear to come out.

  • Paper in tray does not feed - error messsage says to load paper - D1660

    Two questions:  My hardly-used D1660 printer does not pick up the paper in the tray - regular 8 1/2 x 11 - width guide is snug against the pages in the tray - everything looks all right, but still it will not print.  Message is to "load paper."
    I reloaded the software and drivers last night from the HP site, followed all the steps including not connecting the USB cord until prompted, and got a "successful install" message.  Then, at the "restart computer" stage, a "fatal error" message came up after I had closed all other programs and had done the "restart" from the Start menu by clicking on Shutdown and then Restart because there was no other prompt.
    After the Error message, everything immediately began "uninstalling" automatically.  No option to stop it. 
    What happened?
    So I'm wondering what the "fatal error" was - and how to get the printer to pick up the pages and print.
    All the components of the print program are showiing in the Programs queue.  So doesn't look like they are "uninstalled."
    Probably irrelevant:  I recently added a new black ink cartridge and have the original multi-color cartridge in place.

    I've attached a link to an HP Document that should assist you in correcting this problem. You may need to do a reset of the printer, the instructions to do this are included in the document.
    'Out of Paper' Error Message and the Printer Does Not Pick Up or Feed Paper
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02033226&tmp_task=solveCategory&lc=en&dlc=en&cc...
    Dave M.
    Say Thanks by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as Accepted Solution.
    I am an HP employee.

  • My MX892 is clicking and can not draw paper - I get a load paper error message - any suggestions?

    My MX892 is clicking and can not draw paper - I get a load paper error message - any suggestions?

    Hi keciakh,
    To try and get the paper to feed, with a flashlight or other bright light, please check the paper feed area of the printer and verify that there are no paper jams or obstructions in the printer that may be causing the error.   Once this has been done, please look inside of the printer where the inks are located and ensure that there are no obstructions in there that may be causing the print head not to move freely.  Next, please remove and reseat all of the ink tanks in the printer.  Once all of these steps have been performed, please follow the steps below to perform a roller cleaning on the printer:
    You need to prepare: three sheets of A4 or Letter-sized plain paper  
    1. Make sure that the power is turned on. 
    2. Open the paper output tray gently. 
    3. Select Roller cleaning.
    (1) Press the MENU button.
    (2) Select Setup, then press the OK button.  The setup menu screen will appear.
    (3) Select Maintenance, then press the OK button.  The Maintenance screen will appear.
    (4) Select Roller cleaning, then press the OK button.
    The confirmation screen will appear.
    (5) Select Yes, then press the OK button.
    (6) Select the paper source to clean (Rear tray or Cassette), then press the OK button.
    4. Clean the paper feed roller without paper.
    (1) Follow the message to remove any paper from the paper source you selected in (6) of step 3.
    (2) Press the OK button.  The paper feed roller will rotate as it is cleaned.
    5. Clean the paper feed roller with paper.
    (1) Make sure that the paper feed roller has stopped rotating, then follow the message to load three or more sheets of A4 or Letter-sized plain paper in the paper source you selected in (6) of step 3.
    (2) Press the OK button.  The machine starts cleaning. The cleaning will be complete when the paper is ejected.
    (3) When the completion message appears, press the OK button.  The screen will return to the Maintenance screen.
    Reference
    To access other available functions, use the mode buttons or the MENU button.
    This didn't answer your question or issue? Please call or email us at one of the methods on the Contact Us page for further assistance.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • 'Load Paper' error message even when paper is loaded in the front load tray

    Load Paper Error message -
    Printer type: HP OfficeJet 6500 Wireless All-in-One Printer
    (possibly other HP printers as well)
    This 'How-To' article will help you solve a 'Load Paper' error message even though there is paper in the front load tray. You can read this helpful article at http://mikeyates.com/wordpress/?cat=187
    This could also help other HP printers with no easy access to the drop down type rollers located inside the printer.
    Would appreciate any feedback if this worked for you or not.
    Thanks
    Mike

    This is what I found: printer eventually wants to see color ink after running months without.  Steps I followed were: remove ink cartridges. Remove printer head (raise handle at left) and clean (slosh bottom) in hot water, (did it 3 times) and wipe clean.  Replace with new/full color ink cartridges and black if it's got ink still. Run clean printer head program from panel continuously until you start seeing good solid ink flowing on test paper, may even run alignment program at this point.  Turn off printer, if you get Load paper error, hit OK, allow alignment to run, and if heads have been previously cleaned satisfactorily (all colors show up), alignment will show success, and the next time you start printer, no more load paper error.  Point being, the printer eventually wants to see or will look for color ink and in particular, cyan necessary for the alignment page, and without this the program will aparently project a load paper error and alignment failure.  (which you can get aroung by keep hitting OK and cancelling the alignment)!  This totally cured by problem of load paper and alignment failure.  Good luck and be patient, it may take some time to effective clean, I went through all color ink and will have to purchase more !

  • Load paper error message

    The rollers that feed the paper into the printer are not rotating, and a load paper message appears - HP Photo Premium 310

    This is what I found: printer eventually wants to see color ink after running months without.  Steps I followed were: remove ink cartridges. Remove printer head (raise handle at left) and clean (slosh bottom) in hot water, (did it 3 times) and wipe clean.  Replace with new/full color ink cartridges and black if it's got ink still. Run clean printer head program from panel continuously until you start seeing good solid ink flowing on test paper, may even run alignment program at this point.  Turn off printer, if you get Load paper error, hit OK, allow alignment to run, and if heads have been previously cleaned satisfactorily (all colors show up), alignment will show success, and the next time you start printer, no more load paper error.  Point being, the printer eventually wants to see or will look for color ink and in particular, cyan necessary for the alignment page, and without this the program will aparently project a load paper error and alignment failure.  (which you can get aroung by keep hitting OK and cancelling the alignment)!  This totally cured by problem of load paper and alignment failure.  Good luck and be patient, it may take some time to effective clean, I went through all color ink and will have to purchase more !

  • HP designjet Z3200ps that goes into error message 79.04 when trying to load paper.

    The Designjet Z3200ps powers up and comes to ready and ask to load paper. It starts to take the paper and the carriage unit  scans back and forth then the display shows error 79.04.  I've upgraded to the latest Firmware, But it still does the same thing. Does anyone have any other answers. Thanks

    This forum is focused on consumer level products.  For the Designjet you may have better results posting in the HP Designjet forum here.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Error message Load paper in printer when I print a certain word document

    HP Officejet Pro 8500A on Windows Vista-32 bit
    Printer works great apart from when I try and print one word document or any other word document based on it
    I press print,printer tells me it's printing then I get the error message. "load paper in printer" when there is plenty of paer in it
    Other word documents and previous printer was OK
    Thanks

    Hi,
    As the issue occours with a specific document only, make sure to verify that any of the document settings are set correctly
    (e.g. the right paper size, the page margins, etc...)
    Additionaly, try copying the entire content of the document and paste into a new blank document, try printing the new document and check for any change.
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • 8500 Pro-Error Message "Load Paper in device"

    I am receiving error message  "Load Paper in device" when both trays have paper. I have checked paper location in trays and appears to be OK, and have taken tray out and reset in printer. Has been printing fine up to this point.

    Hi,
    As the issue occours with a specific document only, make sure to verify that any of the document settings are set correctly
    (e.g. the right paper size, the page margins, etc...)
    Additionaly, try copying the entire content of the document and paste into a new blank document, try printing the new document and check for any change.
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • Laserjet CM2320 - "Load Paper" message with full tray

    This printer has been working fine for about 2 months and now the only way I can print to it is to use the manual feed slot. The paper tray is full (and I've tried with a half tray as well), and it still says "Load Paper." 
    Any help?

    This is what I found: printer eventually wants to see color ink after running months without.  Steps I followed were: remove ink cartridges. Remove printer head (raise handle at left) and clean (slosh bottom) in hot water, (did it 3 times) and wipe clean.  Replace with new/full color ink cartridges and black if it's got ink still. Run clean printer head program from panel continuously until you start seeing good solid ink flowing on test paper, may even run alignment program at this point.  Turn off printer, if you get Load paper error, hit OK, allow alignment to run, and if heads have been previously cleaned satisfactorily (all colors show up), alignment will show success, and the next time you start printer, no more load paper error.  Point being, the printer eventually wants to see or will look for color ink and in particular, cyan necessary for the alignment page, and without this the program will aparently project a load paper error and alignment failure.  (which you can get aroung by keep hitting OK and cancelling the alignment)!  This totally cured by problem of load paper and alignment failure.  Good luck and be patient, it may take some time to effective clean, I went through all color ink and will have to purchase more !

  • "Load paper " error when paper is already loaded.

    photosmart cc334-64001 my94uf911h
    To print I press ok, a blank piece of paper (no evidence of printing) is ejected and then I get flashing exclaimation point, flashing print photos button, flashing on/off button with "Out of paper" window. Ideas, anyone?
    Thank You

    HI
    Please make sure you are selecting the correct tray in the printing perferences.
    Select the Main tray/Tray 1 for plain paper and if you printing 4x6 photo paper then select Photo tray
    In the software program, click Print , and then click Simple Print .
    Select the correct product from the Printer drop-down list.
    Select the correct paper size from the Paper Size drop-down list.
    Load paper both in main tray and also the photo tray.
    If the issue please revert for more clarification.
    Regards
    Mugu
    ---- If my answer was helpful please click the "Kudos" star.
    If your problem is solved please click the "Accept as Solution" button ---->
    Though I work for HP the post are of my own

Maybe you are looking for

  • Issue in user creation

    I am trying to create EBP users in my newly installed system. When I try to create a user using the web, it does not create it and gives an error 'Error creating users'. When I try to create users using transaction USERS_GEN using option to create us

  • Usings a gamepad on XP

    Hello I'm currently running XP on an iMac 2.16GHz thru boot camp but every time I boot up and try to connect my gamepad the pc asks for pci device drivers, which i don't seem to have. Which ones do I need?

  • Issue while installing FatWire on weblogic server

    I was trying to install CS with Weblogic as the Application server. During the installation of CS, I faced an issue while integrating with LDAP. In log it showed "Could not connect to the application server.Error in creating LDIF file. I had given th

  • Automatically assign a contract to sc

    Hi Experts We are working in Classical scenario. While creating a sc, when we click on the source of supply, we get a list 3 contracts. All the contracts are proposed and none of them is automatically assigned. Our requirement is that one of the thes

  • Does turning down volume in app always have to turn down ringer?

    I have missed several calls because I turn down apps and it make the ringer equally as quiet.  I have the same problem on my iPad.  Any fixes?