HP MediaSmart Server EX490 - Unable to find server/install Connector

Hi,
Would really appreciate any help on this issue since I am at my wit's end.  I have a EX490 with 2 2TB drives on it.  Been so long ago but pretty sure one is a backup of the other.
I began to have trouble logging in to the Windows Home Server Console a couple of weeks ago but didn't think much of it because I could still access the mapped drives on my computer.  I had chalked it up to me typing in the wrong password.
Well, the hard drive on my computer crapped out and had to reformat it.  However, whenever I try to install the Windows Home Connector, it tells me that it can't find my server.  I get that same error message when I try to install the software on any other computer.
I'm starting to freak out a bit because I'm afraid I won't be able to access all the pictures and videos on the EX490.
I've tried searching Google for solutions but all the solutions involve accessing the server somehow and I'm not able to do so.  My next attempt is to take out one of the drives and connect it to my desktop as a hard drive but need to run out to the store to buy another SATA cable.  Not sure if that will work but don't really know what else to do.
Any advice or insight would be greatfully appreciated.  Thanks!

It sounds like a Local Area Network (LAN) issue where you have this MediaServer installed (home, small office),
A LAN Router REBOOT may be necessary to clear .. and assign a TCP/IP address to the HP MediaSmart Server.
HP EX490 MediaSmart Server
Support Page
HP MediaSmart Server Setup Poster
Assure that your MediaServer is obtaining a TCP/IP address from your LAN Router.
You may need to login to the Router's Adminsitrative Page to check this.
This is covered in Chapter 2 of the User's Manual.
HP MediaSmart Server User Guide

Similar Messages

  • I am trying to setup Microsoft office mail and need assistance  - I am receiving the error, unable to find server and DNS setting in the Network

    I am trying to setup Microsoft office mail and need assistance  - I am receiving the error, unable to find server and DNS setting in the Network

    Which version of OSX and what email provider are you using.

  • What does this mean? Server Message: Unable to load server - system error code: 0x80080005, CO_E_SERVER_EXEC_FAILURE: Server execution failed.

    This is the error that we get when we run the Tag File.
    ERROR 04/16/2004 02:26:15 PM Server ERROR from Server: National Instruments.OPCLookoutDrivers. Status: -196608, Server Message: Unable to load server - system error code: 0x80080005, CO_E_SERVER_EXEC_FAILURE: Server execution failed.
    What does it all mean?

    ACRE,
    this looks like the Industrial Automation OPC Server (Lookout OPC) is not correctly installed or configured and therefore the DSC Tag Engine - as OPC client - cannot launch the OPC server correctly.
    Two checks I have in mind.
    - Installation check: Check if the Industrial Automation Server is installed and configured correctly and that you will have a .lpd file as default. Could it be that the .lpd file is corrupted? BTW - what kind of protocol are you using and did you configure aliases for the LPD object? A good resource on checking the configuration might be the online help of Industrial Automation Server (Lookout Protocol Drivers) or the link penDocument>How Do I Configure My Devices with Lookout Protocol Drivers?
    - Access rights, COM/DCOM problems: Can you launch the OPC Server with another OPC client? Is your OPC server running locally? If you don't know how to check on this I found a good KB Tools for Troubleshooting OPC Interface Problems E.g. can you access it with Server Explorer?
    Last question... did you encounter this problem recently while it was working before? What changes have been done on your system?
    Let us know if you have some questions and I hope some of the links help you further troubleshooting this issue.
    Roland

  • Unable to find an installed JRE or JDK of version 1.4 or higher

    hello friends,
    i have facing an error when i tired to install JEdit setup and i hav faced this error before also but what is this error...
    *"unable to find an installed JRE or JDK of version 1.4 or higher"*
    I have installed jdk5 and i have set Environmet variables as below
    JAVA_HOME: E:\JAVA_ALL\JDK\jdk5.0
    and in path---->
    PATH: %JAVA_HOME%\bin;%JAVA_HOME%\lib\tools.jar;
    * do i need to give any thing more than this...?
    thax in Adv.
    Ajay

    http://community.jedit.org/

  • When I try to open netflix I get check network settings I'm signed in and when I go to update it says unable to find server?

    Just Lately I am having a problem with my netflix. It reads error  Please make sure that your device has network connectivity and the date and time settings are accurate. I reseted my device uninstall app and then reapply everything again. When I go on to my Itunes account and try to update it reads unable to install updates cannot find server. How do I fix this!!??

    This has nothing to do with itunes U ( where collegese and universties post educational material for students.)
    You should really post in an appropriate forum.

  • Open Design Studio app through BI Platform - Unable to find server in CMS FWM 01014

    Hello!
    I tried to start work with SAP BusinessObjects Design Studio,
    but there are some bugs with Studio apps & BI Platform:
    Design Studio add-on was installed to BI platform (4.1 SP2),
    after that I successfully connected from Studio to BI plaftorm and save some simple apps to platform.
    When I try to open app in platfform - ERROR:
    Unalbe to find server in CMS server_url:6400 and cluster @server_url:6400 with type pjs and service AnalysisApplicationDesignService.
    I found two SAP notes (in attachment) cause to this issue:
    1894504 - Design Studio - Support Note for BIP Add-On
    2058382 - Adaptive Processing Server containing Analysis Application service crashes
    Reccomendation in them doesn't help
    When I open Adaptive Proccesing Server properties in CMC and check services - there was no Analysis Application Design Service in Select services menu, but it must be there! (SAP note reccomend reconnect service to server)
    Is I am correct that something wrong with Design Studio Add-on?
    What could help?
    Please share your experience and ideas,
    Lest solve this!
    With regards,
    Sergey Marusiy

    Hi Manfred,
    Yes, it was released already (since some time in 2013),
    but it seems to be under revision at the moment.
    The note tells to create a new SIA and switch off the old one.
    We did it slightly different: We just added a 2nd SIA and kept the old one.
    The DesignStudio APS hosting the Analysis Application Service has to be created on the 2nd (new) SIA.
    This has the advantage that you don't have to do all the APS/AJS configuration again (APS split, command line parameters, etc.), since you keep the original SIA, but the disadvantage that you have a 2nd SIA to manage.
    The note mentions this as a workaround.
    The solution should be to run the script attached to the note and then the issue should be fixed, but in our case (and Sergey's) that didn't do the trick, therfore we us this workaround as a "permanent solution" (for the moment).
    Krgds
    Moritz

  • SAPINST 4.7  with  MS SQL SERVER Error "Unable to stop server"

    I'm trying to install SAP 4.7 on
    - Windows 2003 Server _ host "tpt"
    - SQL Server 2000 SP3 _ new Instance "MYSAP". Collation is already set to "SQL_Latin1_General_CP850_BIN2".
    Sapinst ran well on all input data steps.
    Next it applied from steps
    "Create SAP System Opertion System Groups and Users"
    "Check/Adapt File System"
    until step "MS SQL SERVER tempdb Parameters" with Processing message "Changing location of
    tempdb files", then stopped the installation.
    I've got Error_Log file:
    Transaction begin ********************************************************
    INFO 2004-09-19 10:21:24
    Successfully connected to "tpt\MYSAP"
    ERROR 2004-09-19 10:21:25
    MDB-05039  Unable to stop server "tpt\MYSAP"; error: "[Microsoft][ODBC SQL Server Driver][SQL Server]Herunterfahren des Servers auf Anforderung. (german text means "Server shuts down on request")
    [Microsoft][ODBC SQL Server Driver][SQL Server]SQL Server beendet diesen Prozess." (german text means "SQL Server stops this process")
    ERROR 2004-09-19 10:21:25
    MDB-05034  Call to a threaded function returned "1".
    Transaction end **********************************************************
    WARNING 2004-09-19 10:30:21
    The step doChangeTempDBParameters1 with step key SAPSYSTEM|ind|ind|ind|ind|ind|0|SAPComponent|ind|ind|ind|ind|ind|0|DatabaseServer|windows|ind|mss|ind|ind|0|TempDB|windows|ind|mss|ind|ind|0|doChangeTempDBParameters1 executed with status ERROR.
    WARNING 2004-09-19 10:30:21
    An error occurred during the installation. 
    Can you help me?
    Thanks very much
    thanh

    Hello,
    you should not use a german version of MS SQL Server.
    Regards
    Gregor

  • Firefox unable to find server

    After l resat Firefox it seems l've lost contact with the server on my PC. Unable to connect to internet sites.

    It is possible that your security software (firewall, anti-virus) blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
    Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full, unrestricted, access to internet for Firefox and the plugin-container process and the updater process.
    See:
    *https://support.mozilla.org/kb/Server+not+found
    *https://support.mozilla.org/kb/Firewalls
    *https://support.mozilla.org/kb/fix-problems-connecting-websites-after-updating

  • Server Setup Wizard / CiscoWorks Assistant - Unable to find Server

    I just performed a clean install of Ciscoworks LMS 3.2 on our HP Bl460c server, Win2003 R2 SP2 Enterprise,
    8 GB RAM, 146 GB HD, all Windows Updates installed (including ie8), no ciscoworks patches installed.
    No errors during the install.  I restarted and logged in.  I clicked on Server Setup (under Setup Center
    on the LMS portal) as indicated in the deployment guide.  I put in "admin" as the username and typed the admin password.
    The window opens and shows "Collecting existing server information. Please wait"
    after about 5 minutes, I get ERROR - Server Discovery timed out. Please try again later.
    I'm stuck there.  All ciscoworks services are running according to "services.msc" in windows.

    Whether or not a sound system is plugged into the Airport Express has no influence on the generation of this error message by the Airport Setup Assistant.
    I have a distinct feeling I'm going to be reiterating everything the people at Mac support told you to do (so it would be helpful to tell us at the start what you have tried thus far to solve the problem) but the next thing I would recommend is a factory default reset of the Airport Express per:
    http://docs.info.apple.com/article.html?artnum=108044
    The other thing that can cause all sorts of grief is any non-Apple firewall software you might have installed on this Mac - that includes firewalls, "internet protection" software, and VPN client software. The MacOS built in firewall is OK - but all this other baggage should either be disabled or uninstalled.

  • Ipod touch 1st generation can't connect to my linksys wireless router wr110. THe signal is strong and there is a check mark beside my network name, but when I try to open safari it says "unable to find server".

    My friends MacBook connected easily to my wireless, but why not the ipod touch? When prompted for "Password" I enter the security key info and nothing, nadda....zip.  The MacBook asks for the "Security Key" info not "Password", like the touch. What's the difference?

    Click on the blue arrow to the right of the network name, if IP address starts with "169." ,restart your router. It should connect properly after your router reboots in a minute or two.

  • Adobe Creative Cloud unable to find any installed applications

    I was updating my Indesign CS6 DPS Tool via Creative Cloud Desktop last month. However due to some internet connection error it failed. Tried to update it again later but there is no updates anymore. Logout from CC Desktop Application and log back in, all my applications are gone. It is no longer listed in CC Desktop. I have mainly CS6 and one CC application on my mac.
    I have tried the following and it all did not work.
    1. Change Language Perf from North American to International
    2. Delete opm.db file from OOBE folder
    3. Uninstall and Reinstall CC Desktop
    4. Run Adobe Creative Cloud Cleanup tool
    Now i am trying to reinstall but all the programs return an error. Uninstallation Failed. Your uninstallation encounted errors. Only program I manage to uninstall is CreativeCloud Desktop but it also states there are a few errors. Is there any log file I can refer to? I have also notice in the cleanup tool there is no CS6 or CC programs listed. The programs are working fine but it just do not appear as installed in creative cloud and the clean up tool.
    I was using mac os 10.8.5 but yesterday I had to send my notebook for repair and the harddisk was replace due to bad sectors and the os is upgraded to 10.9.2. I used migraion utility to restore my files.

    THe product I have installed is CS6 Design and Web. So I have Illustrator, Indesign, Fireworks, Dreamweaver, Flash, Photoshop, Acrobat Pro installed. I also have several trials like After Effects CC, Audition CS6, Edge Animate, Premiere Pro installed.
    Currently all adobe installations are working fine no problems and issues. In the individual program I can also check for updates. Check the update preferences in application manager and all my installations are listed too.  Below is a list of stuff that is broken.
    1. Creative Cloud Desktop do not list any applications installed. It thinks I have no program installed. Tried all the possible fixes listed on the internet such as chnaging language, delete OPM.db file, reinstall and nothing works.
    2. Downloading any new software or existing software fail at 42%. Which is when the download completes and the software begins to install.
    3. Using any uninstaller included with the programs listed above results in a adobe application manager error. (Uninstallation Failed) So far I could only uninstall creative cloud desktop, flash player, adobe air.
    4. Using creative cloud cleaner tool also do not list any cs 6 or cc installation. only creative cloud desktop.
    5. I have tried reinstalling over using a dvd and also using prodesigntools website direct download links to reinstall it will result in a adobe application manager installation fail error
    So currently I have all my adobe programs working great, there is no way to uninstall unless I manually delete the files which I feel is too drastic action to take since everything is working fine. If I uninstall it manaually and I can't reinstall it back due to errors I won't have any adobe software for work.
    This problems started after a fail update and after logging out of the creative cloud desktop.
    Any solutions?

  • Safari cannot find server when I try to open "the radio reader" web site

    I have been getting a "unable to find server" when trying to open a web site called: The Radio Reader. Any help would be appreciated

    I think they are having some problems.  I just went there and got this message  "
    This program will be available later. Please come back then.", otherwise a blank screen.

  • Error message - Unable to find proxy server - how can I solve this problem

    When I try to enter some sites I get the error message: Unable to find the proxy server, Firefox is configured to use a proxy server that can't be found. This happened suddenly and I'm not sure why or how I can fix it, it doesn't help that most help site are blocked. Im using a Mac 10.5.8 and Firefox 15.

    You can check the connection settings.
    *Firefox > Preferences > Advanced > Network : Connection > Settings
    *https://support.mozilla.org/kb/Options+window+-+Advanced+panel
    If you do not need to use a proxy to connect to internet then try to select "No Proxy" if "Use the system proxy settings" or one of the others do not work properly.
    See "Firefox connection settings":
    *https://support.mozilla.org/kb/Firefox+cannot+load+websites+but+other+programs+can

  • "Unable to find report specified by URL,Please verify that both Server URL and Report URL are correct". Performance Point Dashboard Designer (SP 2013), SSRS 2012 Report.

    Hello Everybody,
    I am using Sharepoint server 2013 , SQL Server 2012 SP1, PerfomancePoint and Reporting Services in SharePoint integrated mode.
    I built one report in SSDTusing an Analysis Services Cube. This report has 3 parameters. So the idea is use Dashboard Designer to use this SSRS Report and connect it with some PP Filters.
    The issue is that I am always obtaining "Unable to find report specified by URL,Please verify that both Server URL and Report URL are correct".
    I have the following settings in the PP Report:
    Server Mode: SharePoint Integrated
    SharePoint Site: http://MySharrepointSite:PortNumber/sites/bicenter
    Document library : Documents (selected from drop down, my report is deployed to document library)
    Report : report.rdl
    When I select the report from drop down list its giving the error in a pop up message box as "Unable
    to find report specified by URL,Please verify that both Server URL and Report URL are correct".
    I have tried to use the most simple report, only with one parameter, but is always displaying the error above.
    When I open the report directly from documents library its working fine and even it is working fine (
    when I deployed the report) but the issue is parameters are not showing.
    Any idea? Please help.
    Thanks in Advance.

    "Unable to connect to the server at CALYSTO\ReportService.
    Hello Tom,
    It should be "ReportServer" in the URL, not "ReportService".
    In "Reporting Service Configuration Manager" look up the correct URL. Open Internet Explorer with right-mouse click => "Run as Administrator" and open the URL, this should work. Navigate to "Side setting" (on top right side),
    go to tab "Security" and add your account with role "System Administrator". Afterwards you should be able to open the URL without running IE as admin.
    Olaf Helper
    [ Blog] [ Xing] [ MVP]

  • My Master server is stopping automatically unable to find out the issue

    Dear Experts,
    My Master server in CMC is stopping automatically and is going to infinite stop state.when i again restart manually its connecting but again it is stopping.what may be the cause unable to find the solution
    Thanks in Advance,
    Regards,
    Vinay.G

    Go to the Tomcat site and read the "First Web App" docs. I'm sure you didn't deploy your servlet properly.
    %

Maybe you are looking for