Hp officejet pro8600 n911g product number CM750A receive msg printing error

Since replacing ink cartridges I'm receiving this message 'printing error: unable to use this print option' have tried printing from different web pages, same result, tried using refilled cartridges then purchased correct hp, same result, then unplugged printer, no change.
I'm using Galaxy Tab 10.1, eprint has worked well for me until now.
This question was solved.
View Solution.

My email printing has been restored........I unplugged the power cord from the printer and the wall plug for a few minutes, also I went thru the control panel and shut off the wireless direct and turned it back on......so I'm not sure which step restored the system.....I'm happy to stop the troubleshooting........it's such a timesucker. Thank you for your time.
NJ

Similar Messages

8600 Pro N911g Product No CN579A and Air Print

Can someone from HP confirm that 8600 Pro N911g Product No. CN579A does not support Air Print? It looks like only 8600As are compatible. I am getting Printer not found error on my ipad2 and 3 but every once in a while it does find the 8600 Pro. Thank you.
I have no trouble printing from my mac book wirelessly.

Hi,
The N911g should be compatible as shown in the following list:
http://support.apple.com/kb/ht4356
(Don't ask me why HP has 8600 and then 8600A).
Please check this to fix:
http://www.apple.com/support/ipad/assistant/airprint/
Good luck.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Can my HP Officejet 6500 E709, Product Number CB815A, All-in-One be Used with Apple's AirPrint?

I currently have my printer connected via a D-Link Wireless Router so that I can print to it from other laptops and netbooks on my home network. Is there any way to make this printer work with Apple's AirPrint - or will AirPrint only work with the HP 6500s that have built-in wireless networking? Thanks

AirPrint only works with e-printers, introduced in 2010. Yours was introduced in 2009 (thus the model number ending in 09), so is not an e-printer, nor can it be upgraded to be one.
Sorry.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Officejet Pro8600 Plus e-All-in-One Printer "Paper to short to auto duplex"

Get same message every time and have to say ok to get it to print. How do you fix this?

Hi RLyons,
Here is a link to a page that will help with this issue. It appears as though you need to update your firmware on your printer.
You can click here to go straight to the page to download the latest firmware that was release on 2-15-2012. You will need to select your operating system first and then click on firmware and download the latest version.
Let us know if this helps.
If I helped you at all it would be great if you clicked the blue kudos star!
If I solved your post please mark it as solved to help others.
I'm a printer tech with HP.

I am trying to install premier elements 11 that I purchased back in 2012 on a new machine with 8.1. I get "invalid serial number" when I enter the serial number I received with the original activation e-mail when I purchased the product, thanks!

I am trying to install premier elements 11 that I purchased back in 2012 on a new machine with 8.1. I get "invalid serial number" when I enter the serial number I received with the original activation e-mail when I purchased the product, thanks!

Error "The serial number is not valid for this product" | Creative Suite

I cant enter the serial number i received when i bought the product from softwareking

i cant enter the serial number i received when i bought the product from softwareking

May I ask
1. What they charged?
2. What exact product and version?
3. What message you get?
Please don't post the serial number!

HP Officejet Pro 8600 Plus e-All-in-One Printer - N911g can not define a custom size paper.

HP Officejet Pro 8600 Plus e-All-in-One Printer - N911g can not define a custom size paper. I would like to have a custom size to work with a card making program.

Can you help me out?
I have an HP Officejet Pro 8600 N911a
When I try to print to a custom print size (2.75" x 6" in my case), I get the same error everyone else is reporting: "Paper detected does not match paper size or type selected. Make sure the paper size or type is correct to continue the job."
I am currently trying to print using Microsoft Word for Mac 2011 version 14.4.5, but I have the same problem with printing from Adobe Reader 9.8.5 or Preview 8.0.
I am running OS X Yosemite 10.10.
My printer's firmware is "up to date" as of 28-Aug-2014.
This is what I did:
1. Open System Preferences from the Apple menu.
2. Click on the Printers & Scanners icon.
3. Click on the + sign under the list of printers to add a printer
4. Click on IP
5. Enter my IP address in the Address field (verified as "valid and complete host name or address")
6. Ignore Protocol field (default is Line Printer Daemon - LPD)
7. Ignore Queue field (default is blank for default queue)
8. Ignore Name field (default is IP address)
9. Ignore Location field (default is blank)
10. Under the Use dropdown menu, I select "Select Software"
11. HP Deskjet 9800 is not an option.
I searched for 9800, but there is no HP printer with that number in the options.
I tried selecting "HP DeskJet 980C - Gutenprint v5.2.3" to see if that would work, but I received the same error message as above. I tried selecting other random HP printers, but so far I've had no luck.
I've been googling about for a way to manually add a printer driver to this "Select Software" list, but I've found nothing (apparently, no one else wants to do this). I did not find a driver download for the HP DeskJet 9800 for OS X Yosemite 10.10 on the Drivers & Software section of the hp.com website.
Additional details on settings for Microsoft Word for Mac 2011 version 14.4.5:
Selected File > Page Setup from menu
Under the Paper Size drop down menu, I selected manage custom size.
- Click + to add a paper size
- Enter "2.75" in width and "6 in" height in the paper size fields.
- Enter "0 in" as the User Defined Non-Printable Area for top, left, right and bottom.
- Double-clicked Untiled in the custom size list and rename the size as Receipt
- Click OK to return to the Page Setup dialog box
Under Settings: Page Attributes:
- Format for "HP Officejet Pro 8600"
- Paper size: Receipt
- Orientation: "tall/portrait"
- Scale: 100%
- Click OK
Select Format > Document and set all page margins to 0.25"
Thank you.

My Product description doesn't match (searching by Product number on Lenovo site)

Hi,
I bought Thinkpad X200s on eBay - new, not used. I received it sealed with tape, not opened, hw configuration was exactly as was described/ordered. The numbers on the box are the same as on the notebook.
But when I go on Lenovo site, and check it by product number, I got different result.
My real HW configuration (only what differs):
HDD: 128 GB SSD, 6 cell battery, don't have UltraBase.
(the rest is ok)
This is what I got from Lenovo site, searching by Product number (7466-3GU):
Product: ThinkPad X200s 7466-3GU
Original description: SL9400(1.86GHz), 4GB RAM, 160GB 7200rpm HD, 12.1in 1440x900 LCD, Intel 4500MHD, Intel 802.11agn wireless, Bluetooth, Modem, 1Gb Ethernet, Secure chip, X200 UltraBase+CDRW/DVDRW, Fingerprint reader, Intel Turbo Memory, 9c Li-Ion, WinVista Business 32
When I called on Lenovo support, they told me, it's strange, and that shouldn't happen. I asked them, to check it, if they will get the same result. And they sent me the same product description, as on the Lenovo site. So HDD, battery, and UltraBay differs.
Now I'm affraid, what if I'll have any problem, if they will accept it, or they will tell me, it's not cowered by warranty, because there are not original parts.
Is this a problem? What should I do now?
Thank you for your suggestions.
Karol
P.S.: I apologise for double post, I posted this question already on http://forum.notebookreview.com, but no reply. Then I realised, this is more appropriate forum for this question.

I bought Thinkpad X200s on eBay - new, not used. I received it sealed with tape, not opened, hw configuration was exactly as was described/ordered. The numbers on the box are the same as on the notebook.
But when I go on Lenovo site, and check it by product number, I got different result.
My real HW configuration (only what differs):
HDD: 128 GB SSD, 6 cell battery, don't have UltraBase.
(the rest is ok)
Now I'm affraid, what if I'll have any problem, if they will accept it, or they will tell me, it's not cowered by warranty, because there are not original parts.
Welcome to the forum!
Warranty (if there is one) shouldn't be an issue as the HDD and battery are customer replaceable units (CRU) and the UltraBase isn't required. But... Did you get cheated by the seller? Have you checked to see if it is truly a new unit with the full warranty and not a refurb?
Message Edited by JaneL on 05-28-2009 07:53 AM
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество
Jane
2015 X1 Carbon, ThinkPad Slate, T410s, X301, X200 Tablet, T60p, HP TouchPad, iPad Air 2, iPhone 5S, IdeaTab A2107A, Yoga Tablet, Yoga 3 Pro
I am not a Lenovo Employee.
I AM one of those crazy ThinkPad zealots!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!

HP Officejet Pro 8600 Plus e-All-in-One Printer N911g wont send SD imapges to computer

HP Officejet 8600 pro Plus N911g model # snprc-1101-01
I insert an SD card full of photos into the built in card reader - but have no option to send the photos to a file on my computer. Does this product only print but not send to a computer? I need to edit the photos before printing.

Hi @Rodney88,
Welcome to the HP Forums!
I understand that your HP Officejet Pro 8600 Plus e-All-in-One Printer N911g wont send SD imapges to computer, and I am happy to help!
According to your printer's user guide found at this website, HP Officejet Pro 8600 Plus e-All-in-One Printer - N911g User guides, as well as this guide, Printing From a Memory Card or USB Flash Drive. This printer only supports printing from SD cards.
In order to transfer the files to your computer, you will need an SD Card reader for your computer.
Hope this clears things up for you, and have a good day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Whats in the full feature driver & software download for officejet pro8600 which isn't in the basic?

Does anyone know what is in the full feature driver & software download V28.8 or for any version really other version for the matter for Officejet pro8600 ......which isn't in the basic download?
I'm running vista on an old computer and it doesn't have service pack 2 on it, which is needed for the full download feature download.
Just wondering if its worth installing service pack 2 to get better features.
Cheers
This question was solved.
View Solution.

Hi,
For Windows Vsita any service pack is supported and you are not required to install a service pack to install the Full Feature Software, Only Windows XP require atleast Service Pack 2..
You may find the system requirements listed below:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02858465&cc=us&dlc=en&lang=en&lc=en&product=432...
The most important feature of the Full Feature Software is the Read Iris OCR which allow scanning to editable text or searchable PDF..
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

HP Officejet 7610 keeps saying printer error without a code number

Tried all the 3 stages of troubleshooting,was also confronted by Another ERROR message in the email that I tried in vain to send to HPsupport because I couldn't remember the product #.This is why I'm forced to go on this page in a last desperate bid to get answers to why my printer won't go any further than this confounded error message on the screen.Also my phone doesn't work so I can't ring them!

@Mr_Tungsten59
Welcome to the forums
I understand you have tried some troubleshooting for the printer error you're seeing. I am going to give you all of my thoughts and suggestions for this issue.
A 'Printer Failure' Message That Might Include an '0x610000f6' or '0x61xxxxxx' Error Code Displays o...
Also: Ensure the printer is plugged in directly to the wall outlet, avoiding power bars and surge protectors. This ensures the printer is receiving full power and may help greatly.
Removing the ink cartridges.
Unplugging the printer.
Dampening a lint free cloth or cotton swab with bottled water.
Gently cleaning off the electrical contacts from the cartridges.
Waiting for the contacts to dry.
Re-seating them back in the printer.
Plugging the printer back in.
If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you, such as a replacement or trade in. If you are calling within North America, the number is 1-800-474-6836 and if you are calling outside of the US/Canada region,: click here.
Good luck and Happy Friday
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Batch/Serial Number for received items

Hi Friends,
I Received a item(0001) 10 quantity with the Management Method is NONE
After This process
I want to Sell this Product(0001) as Serial Number/Batch Number wise
One of our Friend told me that we can do this in
"ItemManagement"
In Batch Management selection window I choosed
Operation -COMPLETE
In Item Code My Item (0001) is not appearing
and i tried to change the item(0001) MANAGEMENT METHOD
a Error is coming
That is"u cant change the management method until on hand quantity is zero"
now wat i have to do to make Batch\serial number for received items
kindly reply me i m waiting for ur reply
D.Sankar

Hi Sankar,
In the Item Master Data - General tab, if an item is managed by 'Batches' and its 'Management Method' is 'On Release Only' then that item can be received into stock without creating Batches for that item. However, the item cannot be released from stock e.g. in a Delivery document without selecting batch numbers.
Lets assume that your item '0001' is 'Managed By' Batches and has a management method of 'On Release Only' in the Item Master Data - General Tab. In this case lets say that a Goods Receipt PO is added with a quanauty of 10 for this item and it adds to the database without creating batch numbers for the it. However, the batch numbers, for this quantity of 10 received in the Goods Receipt PO, must be created before they are released from stock, in a Delivery for example. To create these batch numbers the Batch Management must be run with the 'Operation' 'Complete'. This is the only way to create the Batch numbers in this scenario.
I hope this helps clarify the 'Complete' operation in the Batch Management.
Regards,
Noreen

OCR with HP Officejet Pro 8600 Plus e-All-in-One Printer - N911g

Hello: I have the "HP Officejet Pro 8600 Plus e-All-in-One Printer model N911g" and read in the manual that it comes with Optical Character Recognition (OCR) software. I can't find any OCR software on the accompanying optial disk "HP Officejet pro 8600 series, Windows XP, VIsta, 7, 8 version 28.8".
I'm using an HP Pavilion dv7 laptop running Windows 7 Home Premium ver 6.1.7601 Service Pack 1 build 7601.
I found an entry in All Programs called I.R.I.S. registration but can't figure out what to do with it. Any help is appreciated.
Thanks,
John

Hi,
It's an option during the installtion process. Please try the following Utility:
http://ftp.hp.com/pub/softlib/software12/COL29914/HU-135728-1/hpusetup.exe
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Hello I send imessages to a phone number I receive delivery notice but sms does not show on receiving phone. Otherwise when receive imessage from other phone I reply and receiver sees SMS !!! Any explanation ?

Hello I send imessages to a phone number I receive delivery notice but sms does not show on receiving phone. Otherwise when receive imessage from other phone I reply and receiver sees SMS !!! Any explanation ?

To my knowledge, I've only seen this for imessage only and not SMS.
The other users would need to have send read receipts enabled on their phone.

How to restrict number of received e-mails

how to restrict number of received e-mails at iOS 7 ( at previous iOS there were options to receive last 50 or 100 or 200 messages ) ??

I have no idea which component you're talking about. If want to discuss here about a non-Sun JSF component, then please mention about the name, version and build in detail. You can also consider posting this question at the website/forum/mailinglist of the component manfacturer rather than here. At least I can tell you that the Sun JSF h:dataTable has the 'rows' attribute for that. I can also suggest you to just take a look in the TLD documentation of the component in question. There should be all possible attributes listed with a detailed explanation about the behaviour.

Hp officejet pro8600 n911g product number CM750A receive msg printing error

Similar Messages

Maybe you are looking for