HP OfficejetPro L7780 - Problem installing HP Deskjet and Officejet Software Suite and Driver.

I was having problems with the scanner in my HP Officejet Pro L7780 All in One.
On an HP discussion board, I found that I should install the full HP Deskjet and Officejet Software Suite and Driver.
When I tried installing it, an error message popped up saying that "the application had requested the Runtime to terminate it".
I have no idea what this means. Any help/suggestions? Thanks!

Try following the document below Click on your OS, and follow as many steps as you can.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00836418&tmp_task=solveCategory&cc=ca&dlc=en&lc...
*** If my reply was helpful, please click on the "Kudos Thumbs-Up" on the right, as a way to say "Thanks!".
If this reply also fixed your issue - please click the "Accept as Solution" button, so that others can find the same answer. ***

Similar Messages

How to install Hp deskjet 3050 Jobs software on Windows 8.1 Desktop putter

how to install Hp deskjet 3050 J610 software on Windows 8.1 Desktop HP Pavillion

Hello @dougz ,
Welcome to the HP forums.
I understand that you would like to know how to install your deskjet 3050 software onto your Windows 8.1 desktop.
It should be as easy as installing the printers driver. Just download the software and follow the on screen prompts.
Aardvark1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

Problem installing HP Deskjet 5700 driver on my macpro!

Hi Folks,
i've just bought my Macpro and when I tried to install my HP Deskjet 5700, it pops up a few boxes and leaves me alone waiting for hours, has anyone had the same problem?
P.S. The driver CD is good coz I just installed the Windows version to my HP Laptop without any trouble

Welcome to the forums Karmela!
I saw your post about the installation error you are seeing when installing your Deskjet F2480. I would like to offer my suggestion to you to see if that will help.
Please see this post by @Jamieson who had posted a solution to the same error for another community member:
Here is the post: Installer cannot access this registry key
Please let me know the results and if the issue persists, include which operating system you are running.
Which Windows Operating System am I running?
I hope you enjoy your day
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Problems installing windows on a clean Mac Pro internal drive - issues and questions

Hey,
I have a Mac Pro mid 2010 with the following drive configurations:
3x120GB SSD in a RAID-0 as Boot (OS X 10.8.6) and SSD Scratch (working files)
3x4TB HDD in a RAID-0 as Master (data) and HDD Scratch (downloads)
1x100GB SSD (Spare...to install windows on)
I have literally tried every possible way of installing Windows 8 on that single SSD...both using bootcamp and without.
I can get it installed and working, install all the drivers/updates/software...involving multiple reboots into windows. Everything seems fine, and i shut down and boot into OS X, which works perfectly as expected. BUT, when i try and boot into Windows again (using <option> key at startupand selecting the windows volume, called "EFI Boot" which i did not name) I can log in and start using apps and then 20-40 seconds later i get the BSOD.
I can't for the life of me figure out why.
It's the easiest thing in the world to partition a single OSX drive to boot windows ON THE SAME DRIVE, but i can't seem to boot stably into a standaloe internal drive.
NOTE: I prepare the Windows drive by formatting the entire thing to "Free Space" using disk utility in Mac OS X, and can see that there are no partitions (EFI or otherwise) on the drive. Then I pull all the other drives except the target drive, reboot with a Windows 8 USB drive (created by BootCamp Assistant on my macbook air, because apparently some genius thought that task was too complicated for a Mac Pro...jks) and install from there. The funny part is that i can pick out the target drive in the windows setup, it's registering as 1 disk/partition of UNALLOCATED SPACE, as expected, but there is a warming that windows cannot be installed on this drive because my computer does not support booting to this disk, and that i should check that it's controller is enabled in the BIOS.....which to the best of my knowledge is not used by intel-macs, which use UEFI. But i can still click "Next", so I do and install Windows and boot to this drive, restarting and installing software updates and drivers as mentioned above.
The BSOD seems to pop up only after i've rebooted to Mac OS X and then try to go BACK to Windows 8.
The version of windows 8 and install USB were checked using my macbook air, and they work flawlessly. ASLO that warning about not being able to boot to the drive during windows setup isn't present.
I'm wondering if the fact the the RAID volumes are a software RAID, using Disk Utility in OSX is causing windows some issues...which makes no sense.
I'll keep playing, but I'm not confident I'm ever going to find a solution.
Somebody be my hero...

Hey Hatter,
Another question for you:
I can't seem to use system preferences>>startup disk to boot into windows. When I select windows and then restart i get a black "BIOS-like" screen which then cuts out and a message is displayed that says "there is no bootable disc"
This stumped me, because I know i can boot into windows from the boot screen (holding down option and selecting "EFI Boot" which apparently is what my windows drive is called.
because of my Mac OSX Raid arrays, i had to install windows by formatting a drive to HFS+ (GUID) pratition table, then repartition to "Free Space" then using an install usb that i made with my macbook air, pull all my other drives and install by selecting the usb drive to boot from.
I went into disk utility to see if I can repair the disk, and disk utility says that the disk has to EFI partition and that we won;t be able to boot from it....which is very confusing because i can boot from it.
Windows 8 apparentl;y uses UEFI from my research....so i'm utterly stumped.
I beleive this is also the cause of my newly purchased graphics card Mac Edition HD 7950, throwing me a BSOD when i select to boot in windows from the boot menu...
Any advice would be greatly appreciated.

Problem installing Mac OSX on my new MacBook hard drive...

Hi,
i am beside myself again...(i just visited my local Genius bar this afternoon). Any help would be most appreciated! :o)
i purchased a 2.5 inch SATA Fujitsu 120GB laptop hard drive for my new MacBook. Followed the awesome* instructions on "how to replace/upgrade hard drive", and took out the original Toshiba HD. What the instructions* failed to mention was that i would eventually need to use a Torx screwdriver (star-shaped) to remove the caddy/carriage from the Toshiba HD. Got that the next day and replaced the Toshiba 80GB with my new 120GB Fujitsu drive..., it slipped into place nicely but i did notice that the Toshiba had four short wires protruding out to the right of the contacts, which my new Fujitsu didn't have... hmmmm...?!
anyways, tried to install Mac OSX on the new drive, booted up with the install disc... went thru' chosing the language (English), agreed to the second step... but when it came time to install, there was NO icon at all in the box where i am asked where i want to install it!!!
so i go to disk utilities, and see that my Fujitsu HD is indeed recognized, but none of the buttons in first aid are active... so i can't check it.
i figured that had to do with the four little wires, so i replaced the original Toshiba and made a reservation with Genius Bar to ask for assistance.
this afternoon, i explained my problem and was told the four wires have NOTHING to do with it... Lawrence (the genius) told me to (actually, first he said Apple does not recommend my doing this... and that i should go to a 3rd party computer store such as Dino to get help!) go back to disk utilities and partition, then erase this drive and then i will see the icon for this drive in the install box.
Well i did everything i was told to do and... still, there is no icon for my Fujitsu HD! :o(
I was able to partition, after which there was a disc0 under the Fujitsu drive on the left side of the disk utilities. When i go to system profiler, and click on ATA... it too shows the Fujitsu drive... but i cannot install because there is NOTHING to click on at the installation step! the "continue" button is not active and only the "back" button is actively mocking me!!!
i know many of you have successfully upgraded your hard drive... what am i doing wrong? Would a different brand work better? I know Seagate is quite popular, and OWC sells a Western Digital version as well as a Hitachi... do those four little wires make a difference? Would the Seagate come with those wires???
i am going crazy... thanks, and sorry for the long post, just wanted to let you know what i've done!
blue skies,
ps. please feel free to email me at [email protected] if you think that would be better! :o)

Hi,
...after getting back from school, my MacBook was STILL in the process of verifying and "supposedly" repairing... since i was gone for over 10 hours, i finally assumed the drive was either defective or just incompatible, and quit disk utility.
...this morning i went out and bought a new Seagate 120GB SATA (they didn't have 160GB SATA drives, only 160GB ultra-ATA drives) 2.5 inch HD. This one DID have those four wires to the right of the contacts... (i don't know how important they are), and after changing and exchanging the Toshiba/Fujitsu HDs, it was a breeze putting in the new Seagate drive.
Erased > patritioned > and sure enough, the icon showed up and the biggest smile showed up on my face as i finished installing! :o)
I contacted the original seller of my fujitsu hd (it was a 2.5 inch, 120GB, serial ATA notebook drive) and he was kind enough to say "just pack it up and send it back for a refund!" (minus shipping and re-stocking fees of course! :o)
Just wanted to mention that, the fujitsu hd WAS recognized by disk-utility and at the bottom left of the window it said that the fujitsu was "GUID partitioned"..., so i am still scratching my head as to why it didn't work?!
I want to thank everyone that offered advice, it was helpful and i feel more comfortable with my MacBook after this trying and very frustrating episode! :o)
blue skies,

Problem install the new version of PC Suite

hi i'm italian boy and sorry for my english.
i have this problem. i tried to update pcsuite (version 6.82.27.0_ita) in a new version( 6.84.10.3_ita)1, but the installation stopped and i recived this message:
"the older version of nokia connectivity cable driver cannot be removed. please contact your technical support group"
when i ask info to pcsuite program i recive this info:
OS: Microsoft Windows XP 2600
Service Pack 2
Lenguage: Italian
Nokia PC Suite:
Build 6.82.27.0
Lingua: Italiano
Connectivity Cable Drivers:
Not installed
PC Connectivity Solution:
Not installed
sameone can help me to resolve this problem
Thanks

Hi briviopc
You perhaps need to go to microsoft.com and download Windows Installer Cleanip Utility "msicuu2.exe"
Go to Start > Programs > Windows Installer Cleanup Utility
When you run this it looks a bit like the add/remove program window. Now select "Nokia Connectivity Cable Driver" and "PC Connectivity Solution" programs.
Now go back to Add/Remove Programs in Control Panel and try and remove "Nokia Connectivity Cable Driver" and the "PC Connectivity Solution" programs. They should now uninstall.
Reboot your PC
Happy to have helped forum in a small way with a Support Ratio = 37.0

Communication between Canon 350D software suite and OS X 10.4.3

I have recently acquired a Canon 350D SLR camera and also decided that I would upgrade to OS X 10.4.3 in order to upgrade my Iphoto to version 5.0 (only available via the bundelled Ilife05 package unfortunately).
However, now that I am on 10.4, I have found that Installation disk for Canon software (camera window, image browser etc)is no longer able to install correctly - this did not seem to be a problem when I was working with OS X 10.2.
I have advised by Canon that it could be a firewall function that could be causing the problems. Anyone out there got any ideas as to how I might get over this hurdle?
Powerbook Mac OS X (10.4.3)
Powerbook Mac OS X (10.4.3)
Powerbook Mac OS X (10.4.3)

So you are running iPhoto 5.0?
If so, do you still need the features of the canon software suite? I have used iPhoto for quite sometime with no issues. I have a canon and an Olympus.

HT3161 I have a 27" mac running with a 3.4 ghz core i7 and 16 gigs of ram and using the latest logic. I have a composition consisting of 7 audio tracks and 4 software instruments and 4 plugins on 4 tracks so why is my CPU spiking ?

I'm running a 27" imac with a 3.4ghz core i7 processor and 16 gb of ram.... In logic I have a project with 7 audio tracks with various plugins running and 4 software instruments which incidentally are not playing all the way through the track...my CPU spikes even if the project is paused...why is this happening on such a high end machine.....wasting my money again seems to spring to mind !!

Did you read this support article?
http://support.apple.com/kb/ht3161

Case Study and assessments: WebLogic Suite and particularly Coherence

Hi,
I would like to find some examples and perhaps assessments regardins WebLogic Suite and particularly Coherence. How can I find such reviews in Oracle pages?
Thanks in advance,
Mohammad

Hi Mohammad,
About half way down this page there are links to some: http://www.oracle.com/technetwork/middleware/coherence/overview/index.html
JK

I am having major problems installing Mountain Lion. After downloading successfully and attempting to install the process froze after restarting - ended up hanging on the OSX Recovery screen. Wouldn't restart properly without me selecting a startup disc.

Three times I went through this same process for the same outcome. I have redownloaded Mountian Lion three times. I removed the Lion install package from the Applications folder in case this was causing a problem. Deleted and remounted the Mountain Lion package each time. Finally got the package to run through the install, restart and begin the file install - at the end it failed and I was left with a blank startup disc and no data. I have backed up. Through the OSX Recovery screen I selected a Lion reinstall - checked my credential against the app store -fine. But then failed on the reinstall. Now doing a recovery from current backup but wondering the **** is going on. Wasted over 24 hours of processor time.
MMacBook Pro late 2009 (Lion 10.7.4) 8gRAM. New 750 g HD

Three times I went through this same process for the same outcome. I have redownloaded Mountian Lion three times. I removed the Lion install package from the Applications folder in case this was causing a problem. Deleted and remounted the Mountain Lion package each time. Finally got the package to run through the install, restart and begin the file install - at the end it failed and I was left with a blank startup disc and no data. I have backed up. Through the OSX Recovery screen I selected a Lion reinstall - checked my credential against the app store -fine. But then failed on the reinstall. Now doing a recovery from current backup but wondering the **** is going on. Wasted over 24 hours of processor time.
MMacBook Pro late 2009 (Lion 10.7.4) 8gRAM. New 750 g HD

Problem installing new ACR using LR3.4.1 and CS5

I've received error messages when I try to Edit In Photoshop, telling me that I need to update my ACR in order to proceed. I get almost all the way through with the installation (having closed LR3 and CS5) when I'm told to close Bridge. I don't use Bridge and it has not been opened at any time during the attempted installation. I'd appreciate any help that would allow me to complete the installation. Thanks.

Please read responses from other forum members more carefully – I fully understood what you said in the original post and did provide a useful suggestion.
You should identify the operating system you are using on any post. I'm guessing you are a Mac user, since we have already explained about Window's system tray, which is now called the 'notification area' on Windows 7. The following link has information on how to setup Adobe Bridge for both Windows & Mac systems so that it doesn't automatically launch at startup. This is most likely the cause of the problem you are experiencing! NO, you will not see the Adobe Bridge application because it is running in the background!
http://help.adobe.com/en_US/creativesuite/cs/using/WSfd1234e1c4b69f30ea53e41001031ab64-736 da.html
In the Adobe Bridge Edit>Preferences>Advanced dialog box, unselect the option for 'Start Bridge At Login.' Restart your system, since there does not appear to be a graceful way on a Mac to "stop" Bridge when it is running in the background. From hence forward, Bridge will NOT automatically launch, nor prevent you from loading software updates, etc.
If this does not resolve the software update problem please let us know – We will try to provide further assistance.

Problem installing Palm 4.0 desktop software

I am running into errors when I attempt to install the Palm Desktop 4.0 software so that we can sync our (old) Handspring Visor handheld to our (new) Mac. I downloaded the most recent version of the Desktop (for the Visor) from the Palm website -- the installation preceeds until near the end when is hangs at installing file 746 out of 791 (or thereabouts) with the (helpfull) message of 'Installation did not complete successfully. Do you want to reinstall the software or quit?' Sometimes it hangs at a different file -- but the error message is the same. Help!
MacBook Pro 15" Mac OS X (10.4.8)

No, that error message shouldn't be a problem.
If I recall correctly, Palm Desktop has an Updates folder inside the Palm application folder that will try to install a Palm OS update. Your Visor is incompatible with the update that is trying to be installed and, cancels out.
To stop Palm Desktop from trying to install the update each time you perform a HotSync, check for and rename the Updates folder in the Palm application folder.
In Mac OS X, go to:
/applications/palm and then rename the Updates folder to something like Updates.Old.
Alan G

Problem installing Laserjet 4050 in Windows 7 x64, No driver in Universal Print Driver v5.0.3

I have just installed Windows 7 64Bit operating system. I have be successful in installing several other more recent HP printers in the office. However, my main "workhorse" printer is a HP Laserjet 4050 and I have downloaded the Universal Printer Driver v5.0.3 for Windows x64 - PCL 5 and PCL 6, and in both cases it does not find a suitable driver. The HP download site states these Universal Drivers will work, but I cannot get it to install.
Is there a driver that will work on the 4050 in Windows 7 X64? Thanks everyone.

You're probably getting the "Windows cannot locate a suitable printer driver" error if you're trying to add the driver while adding a printer that is shared over the network. You see, HP's Universal Printer Driver (UPD) doesn't contain the PnpIDs of every printers it supports, so when you specify HP's UPD as the drivers for the network printer, if Windows can't find a match for the printer's PnpID it spits out the driver isn't compatible.
The way to overcome this is to install a "generic" printer locally, using HP's UP driver, and change the port afterwards to point to the shared printer. So, first, add a local printer (that will be using the LPT1 port - make sure no printer is attached!), and click on "Have disk(s)" to browse to and select HP's UPD. Going through the remaining steps should install a locally-attached printer named something like "HP Universal Printing PCL 5" (or "[..] PCL 6"). You'll then go in the new printer's properties, on the "Ports" tab, and click on "Add Port...". If you're installing a shared printer, you'll select "Local Port", click on "New Port..." and specify the path to the printer (e.g. \\myserver\hplaserj) as the port name. Those steps should do the trick.
Last thing: beware, though, as HP's UPD PCL 6 might not be compatible (anymore) with your LaserJet 4050, as they use a PCL XL class number/revision (class 2.1; sort of a version number of the protocol) that is higher than what your printer's firmware might support for PCL6 (should be class 2.0) I know the latest versions of HP's UPD PCL 6 doesn't work with our LJ 4000 & 4050 printers, so you might have to use the PCL5e driver for those 64-bit workstations.
Background info:
PCL XL error on Laserjet 4550n with PCL 6 driver [IT Resource Center Forums]
Universal Print Driver PCL6 broken on LaserJet 4000 [IT Resource Center Forums]
Printer Command Language [Wikipedia]
Let us know if it works.

IPOD touch Screen is blacked out. I charges and itunes recognizes it, only the screen remains black. Is there any way to fix this Problem. I have the latest software update and I restored it several times, but screen remains blacked out.

My IPOD touch 4th gen screen does not display. The software seems to be working and itunes recognizes the device. I have restored it and reset the IPOD several times but the screen is still black. What can I do to fix it? your help is very much appreciated. I do not have access to an apple store since I am stationed in Afghanistan.

If you restored to factory defaults/new iPod (you did not say the type of restore your performed) and are still having the problem that indicates a hardware problem. An appointment at the Genius Bar of an Apple store is in order..

Problems installing Itunes error message - Hkey_local_machine\software\microsoft\windows\currentversion\run - Verify that you have sufficient access to that key, or contact your support personnel

Can anyone help? I have been trying to install the new version of Itunes for ages my new iphone wont activate on the old version!! Keep getting the same error message - Hkey_local_machine\software\microsoft\windows\currentversion\run - Verify that you have sufficient access to that key, or contact your support personnel.
Please Help!!!!!

That particular key can sometimes be hit by malware, liam, so just to be on the safe side I think we should try a malware scan first.
Try downloading and installing the free version of Malwarebytes AntiMalware. Update your MBAM definitions and then run a full scan of the PC. (Takes about 2 hour on my Lenovo.)
http://www.malwarebytes.org/mbam.php
Does the scan find any infections? If so, please paste the contents of the log file for the scan in a reply here so we can have a look

HP OfficejetPro L7780 - Problem installing HP Deskjet and Officejet Software Suite and Driver.

Similar Messages

Maybe you are looking for