Hp support assistant report print

OK, HP support assistnat finally works, so great data collected and info presented to user. Now want to Print a report of all the info HP support assistant collected and shows in each tab. File and paper. How can do please? Thanks2u, Marco...

Hi,
Screen dump is probably the way to go. Copy that part (Alt+PrtScrn) then paste to Paint.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

11g Report supports Dot Matrix Printer ?

Hi,
We have 11g reports, with following Font;
Windows Font - Arial
Java Font - SansSerif
We have Billing with carbon-copy, so we have to print it on Dot Matrix Printer,
but printing is not of good quality.
When we print of Word,Excel documents with same font, its quality is OK.
I have tried other Fonts as well, but problem remains the same.
My question is, Can 11g Reports supports Dot Matrix Printer ?
Thnx/Regards,
Ben.

Hi,
Have you tried applying Services Pack and Hot Fixes?
Please refer to the link for update and others,[ click here|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/bobj_download/main.htm]
Regards,
Clint

HP Support Assistant Uninstalls L7780 printer

I have a HP Officejet L7780 connected wirelessly to my HP TouchSmart 600 (Windows7 64-bit). I’m running the Full Featured OfficeJet software dated 1/15/2010.
Each time the HP Support Assistant runs it finds no pending actions. However, it removes my L7780 Printer. The printer does not show up in the Device & printers or any printer drop down boxes. The L7780 FAX is still there. Every time the Support Assistant summary shows up (This morning was the latest) when I boot my computer I check the Device & printer and sure enough the Printer is gone, but the FAX is still there.
When I look at the Support Assistant it shows red X (dated 4/17/2010, 5/10/2010, and 8/2/2010) for the “Cannot find scanned image or document after scanning critical update”. However, if I download and attempt to install the update I get a dialog stating “This update does not support any HP device drivers that you have on your PC. You do not need this software update.”

I've come to the end. I don't know what to do. The printer has never given me any problems except every time I get an update, it stops working off my computer. It works fine by itself, but the wireless connection to my computer is weird in the past I've had to uninstall all the software and then reinstall and everything will work fine until I get an update and I have to go through it all over again. This time, that didn't work the wireless Wizard keeps saying invalid WPA passphrase I checked thoroughly, I've got the right passphrase off the back of the router. I don't know what else to try if anyone knows what to do about this. I would sure appreciate it.
Thanks
Steve 52

I need crystall report print button support insted of exporting to pdf then print

Crystal reports are the most widely used reporting software.its print button is working on active X controls. due to the i am not able to use direct print button.
so please help me to provide a plugin for crystal report

Here is C# code for print crystal report
cryRpt.PrintToPrinter(2, true, 1, 2);
check this it will help you to print crystal reports
http://csharp.net-informations.com/crystal-reports/csharp-crystal-reports-print.htm
It may help you.
merca.

How to suppress extra form feed for character report printing using ORARRP?

Dear All,
We are using Oracle Application Server 10g (10.1.2.0.2) on Windows 2003 Server and most of our client PC's are Windows XP Professional machines. We are migrating our existing oracle application from 2-tier architecture to 3-tier architecture (6i to 10g). We have installed ORARRP utility for remote direct printing and to a limited extent we are successfull in getting the things work out for our system users, However, we are facing a problem using the ORARRP utility for which we are not able to find a solution till date.
We have configured ORARRP utility on every user's PC and the printing of bitmap reports is working well. However, while printing CHARACTER reports using ORARRP utility, after the report gets printed, an EXTRA FORM FEED is issued by ORARRP to the printer and because of this the printer stationary skips one extra page and advances to the next page. Please note that this EXTRA FORM FEED happens only while printing a CHARACTER REPORT.
Has anyone come across such a problem using ORARRP ? How can we avoid this extra FORM FEED from CHARACTER REPORT printing using ORARRP ? Is there any other tool which supports remote direct printing just like ORARRP?
I shall be highly obliged if anyone could reply to my queries ASAP.
Regards,
KrishnaKumar S

Please help ! I tried the "send_form_feed" and "postscript_dos_print" parameters without success. The extra form feed is always there. Thanks.

Pavilion dv7 blue screening - HP support assistant cannot test BIOS or memory modules but BIOS can?

About a month ago my dv7 started doing something strange - during normal use (not gaming, just word processing, showing a powerpoint presentation, showing a video on youtube, etc.) the cooling fan speed would suddenly ramp up to jet-engine speed and shortly thereafter the computer would blue screen, crash dump, etc. (no, I did not write down any info from the blue screen message - I will do so next time). Having experienced a blue screen issue with a Dell laptop I thought the hard drive was going bad, because about the same time I was suddenly unable to run a backup of the hard drive. After several attempts, I was finally able to backup the hard drive, and then replaced it with a new drive, re-installed OS with my recovery flash drive, worked through all of the windows updates that were recommended, and thought everything would be good to go. Now I have no problems backing up hard drive, etc. Then on day 2, after only a few hours of use, the cooling fan speed suddenly ramped up again and the blue screen returned.
A friend who is a tech suggested running HP diagnostics on everything, so I rebooted, hit F2, and started by testing the hard drive; as expected, no problems there. I next tried to test the memory (8192 MB total in two modules), and the test failed. I also tried testing the BIOS, and that too failed. The HP diagnostics reported that it couldn't even read the BIOS. Hmmm, strange. So I re-booted, hit F10, and went into the BIOS (BIOS date 10/5/11, revision F.1B). I HAVE NOT IN ANY WAY MODIFIED THE BIOS - I'm good, but not that good. Via the BIOS test utility, I tested both memory modules independently and then together, and everything checked out fine. I also tried switching modules between slots and re-tested via the BIOS utility, and that too checked out. I then returned to the HP diagnostics utility and tried re-testing the memory (both modules together - failed, one module at a time - both failed, in both slots).
HP tech experts, can you give me any guidance? This has been a great machine for me, I have taken good care of it, and am hoping to get a few more years out of it (I'm a middle-school science teacher, can't afford another one at this point). If I can't find a fix, I may have to go back to using my antique overhead projector in my classroom...

Hi @h20roks ,
Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your HP Pavilion dv7 and getting the BSOD and shutting down. I recommend to restore the BIOS defaults with this document selecting the reloading the BIOS default settings. Not rollback.
Here is a link to the HP Support Assistant if you need it. Just download and run the application and it will help with the software and drivers on your system that could need updating.
Hope this helps you.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Report printing

Hi All,
I am working on Apex with Oracle XE universal...i just tried to acheive print pdf functionality throgh integration of Apex with Apache cocoon...
Everything is working fine...my Apache server is working,cocoon is working but when i m clicking on print button ....it showed me the following errors:
ORA-29273: HTTP request failed
ORA-06512: at "SYS.UTL_HTTP", line 1186
ORA-12570: TNS:packet reader failure
I don,t know what problem is there in my application...or I need to do some settings....
if anyone knows please help me....
I did the following settings in my report page:
In APEX, I logged in as ADMIN into apex/apex_admin and went to Instance Settings and did the following:
- Print Serverr: Standard Support
- Print Server Protocol: HTTP
- Print Server Host Address: XYZ
- Print Server Port: 8181
- Print Server Script: /cocoon/fop_post
In my APEX application, in the Regions section, I click on the Print link next to my report. I have the following settings:
- Enable Report Printing: Yes
- Link Label: Print
- Response Header: Print Server
- Output Format: PDF
- Report Layout: Default Report Layout
- Print URL: f?p=&APP_ID.:1:&SESSION.:FLOW_XMLP_OUTPUT_R1063230002781575
Edited by: user9139675 on Mar 23, 2010 1:54 AM

what was your solution?

Crystal Report Print Control install error

Hi,
I'm trying to manually install the crystal report print control active x file. After righ-clicking to install the printcontrol.inf file, i got the following error message; "The INF you selected does not support this method of installation" Any idea why I could not install?
I am running Windows Vista and have local admin rights.
Thanks in advance.

Umm, when I enter the following search terms in the search box at the top right corner of this web page:
print control activex crystal net
I get the following KB:
[1645006 - How to install the Crystal Reports ActiveX Print Control manually?|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333633343335333033303336%7D.do].
See if that helps. Note that since you do not mention version of CR, the KB may not be specific to your version of CR, but it should point you in the right direction, no matter what the version.
- Ludek

Crystal Report Print

hi,
Now i am working in Asp.net.In this website i did one crystal report.if i have to take print from crystal report print icon .the will like some boxs will continuously appear.i attached the print image.
And one think if i will use export to pdf and then take print it will proper.
Please Help me.

Ramesh, you have asked the same question in three different posts. This one, then
Crystal Report Print
and
Report
This, by definition is spamming and will get you banned from these forums. Please read and make your self familiar with the Rules of Engagement.
If this is a critical issue, you have the option of creating a phone incident here:
Crystal Single Case Technical Support - SAP Business Objects US Online Store | SAP Online Store
At this time, I am locking this thread. I encourage you to continue here:
Crystal Report Print
Make sure you answer my question on that thread as well as provide the info Bhushan requested in this thread.
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter

HP Support Assistant Has Ceased to Function

HP ENVY Phoenix h9-1420t CTO Desktop PC
Windows 8.1 Pro w/Media Center - 64 bit
For some unknown reason, HP Support Assistant has stopped working. I noticed that the large taskbar icon was gone.
I tried to run the program just out of curiousity. "HP Support Assistant has stopped working. A problem caused the program to stop working correctly ..." etc. This is reproduceable. The program will not start.
So, I tried to uninstall it from Control Panel. It appears to start to uninstall, but then I get an error message. "Error 1316 A network error occurred while attempting to read from the file C:\windows\Installer\HP Support Assistant.msi" When I click "OK" it rolls back. This is also reproduceable.
I have tried downloading the software again from HP: sp64126.exe I accept the license agreement and proceed. I get a message that files already exist and do I want to overwrite them all or not. INo matter what I choose, nothing happens. The installation window simply disappears and I am back to square one.
Windows is fully updated. I am using Norton Intertent Security 21 -- fully updated.
This question was solved.
View Solution.

I am taking a survey, JUST HOW LONG would you wait for a reply?
Luckily your question has been answered by a forum user. See here ( the reply).
I am a volunteer. I am not an HP employee.
To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Both Customs use Rosewill Blackhawk case.
Printer -- HP OfficeJet Pro 8600 Plus

HP Pavilion g7 can't find or re-install HP Support Assistant & HP Solution Center

After a week or so ago, I discovered my printer could no longer scan. Made several (& I mean several) attempts at following the instructions to install the full driver for my HP Photosmart C7180 printer.
I then ordered the full drive CD for Window 7 (64) from HP and I am still having problems.
After going around and around trying to get it to work; uninstalling and re-installing everything listed in the Support & Downloads on the HP website. I discovered both my HP Support Assistant and my HP Solution Center are no longer on my computer. They won't re-install either following the instructions per HP Support & Download on HP's website.
I have no clue how to get things straightened out.
The most frustrating thing is there seems to be many other people with printer/scan problems even with other printers. Everything I have read so far as a solution to their problems is the same thing I have been trying to do.
Someone please enlighten me?
Hp Pavilion g7 1000 CTO
Window 7 Home Premium (64)
Hp Photosmart C7180

Hey Fasteddie0747,
I understand you are having an issue with the HP Support Assistant & HP Solution Center installing on your Hp Pavilion g7.
Here are some step you could check on your Computer,
Click the Windows icon, type services in the Search box, and then click or tap View Local Services. Scroll down to the Windows Installer. Startup type should be - Automatic, and Service Status should be - Started
restart the computer and try installing again.
Please feel free to contact me if you have other questions
Thank you
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Weblogic 10.3.4 as report printer for PDF printing using apex_fop.jsp

Hello,
Is it possible to use the apex_fop.jsp in combination with Oracle Weblogic 10.3.4 for PDF printing?
We have managed to get our Apex application to print PDF documents using Apache FOP with Oracle Weblogic 10.3.3 or Apache Tomcat 6 as a report printer.
But when we are trying the Oracle Weblogic 10.3.4 server as report printer, we will get the Error 500--Internal Server Error error in the pdf.
One of application server log shows the error "Expected Node-set in Path Expression".
Regards,
Mathieu Meeuwissen
Edited by: Meeuwtje on 17-jan-2012 17:00

Steve,
I am using JSF2.0 and getting javax.el.ExpressionFactory NoClassDefFound issues.
OEPE Helios
Weblogic 10.3.3
I have an EAR containing one WAR.
WEB-INF/lib
el-api-2.2jar
el-imp-2.2.jar
jsf-api.jar (2.1.1)
jsf.impl.jar (2.1.1)
jstl.jar (1.1.0-D13)
web.xml has
     <context-param>
          <param-name>com.sun.faces.expressionFactory</param-name>
          <param-value>com.sun.el.ExpressionFactoryImpl</param-value>
     </context-param>
EAR has
weblogic-application.xml with
<wls:prefer-application-packages>
<wls:package-name>org.eclipse.persistence.*</wls:package-name>
<wls:package-name>javax.faces.*</wls:package-name>
<wls:package-name>com.sun.faces.*</wls:package-name>
     <wls:package-name>com.sun.el.*</wls:package-name>
     <wls:package-name>javax.el.*</wls:package-name>
</wls:prefer-application-packages>
I see by your post that JSF2.0 support can be solved by either deploying a shared-library or using the weblogic.Deployer utility. Unfortunately, we don't have access to change the Weblogic instance in any way. I was hoping that using the prefer-application-packages would be sufficient to use alternative classes to Weblogic's but I have not been able to get it to work for the javax.el classes. I have tried not including javax.el and the app deploys but then accessing a page produces a javax.el.ELResolver no method found for invoke. Invoke being a newer method defined in el-api-2.2.jar. If I was able to convince them to add some shared libs, what are all the jars that would be required to make this work?
Any suggestions would be greatly appreciated.
Thanks
John

Microsoft.net and HP support assistant don't work , can't find an answer here.

HP support assistant has stopped working and Microsoft.net error reporting shim stopped working. Messages come up repeatly and every day. What to do about it. Non computer person haveing trouble.

Lasttry,
Thank you for that information.
First I would like you to uninstall the current version of HP support assistant. This link will guide you to how to access the list of your programs, once there right click on the HP support assistant and then left click on uninstall.
Once that it is finished restart the computer, and when the computer is back up go to this page to install the newest version of the HP support assistant, when you open the link click on home and business desktops. After that is done try testing the program out for an extended period of time.
Please respond back at your earliest convenience.
Thanks
Clicking the White Kudos star on the left is a way to say Thanks!
Clicking the 'Accept as Solution' button is a way to let others know which steps helped solve the problem!

HP Support Assistant Tune up and Health Analysis

I am becoming exasperated by regular failures reported during the monthly HP Support Assistant Tune up or Health Analysis on my HP Pavillion Slimline Desktop.     Usually the display disappears before I can make a screen grab.     However today I managed the following:
So why is the health analysis failing?      I am not sure whether any relevant diagnostic reports are placed on my computer.     If they are produced, then I don't know where to find them.
Or is it that I have a corrupt/out-of-date version of the Support Assistant software?
Or is there some other explanation?
I'd be grateful for any illumination.     Thanks.
This question was solved.
View Solution.

Brian, welcome to the forum.
I can't give you any good explanation for the problems that you are experiencing. It is most likely a glitch in the software. I have had problems very similar while using Windows Update. The updates don't install for no apparent reason.
Here is the Official Website for HPSA. I suggrest downloading and installing the lastest version. You should uninstall the current version before beginning. I would appreciate hearing the outcome.
Please click the "Thumbs up + button" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Home Office Network Software Challenges - Post HP Support Assistant Update

Hi
I have an existing home office network setup on an HP Officejet 7410 with assistance from 'Dean' at the end of 2009 / early 2010.
Essentially I have a relatively new HP Compaq 6000 Pro MT Windows 7 32 bit main desktop connected by ethernet to a Netgear DG834GT router, a wirelessly connected Vista Business 32 bit laptop I use when in London and a secondary wirelessly connected family XP Pro Desktop.
All has been running smoothly until fairly recent HP Support Assistant updates for the main desktop - this has caused the HP all in one not to function and corrupted the HP Support Assistant software. I have tried uninstalling the HP 7410 software and have had to use Revo Uninstaller on a medium setting to remove some stubborn programme elements.
I am now unable to reinstall using the Full HP Software suite but have managed to get the printer part working using the basic HP driver download.
Can anyone provide assistance as to how to get back my computer and printer functionality ?
I did try contacting HP support but as it is an old printer they will not provide support (without considerable charge) despite being related to their own HP update software on my somewhat newer (but again out of warranty) Win 7 main desktop.
If I can not solve this problem by uninstalling and reinstalling the software I will be forced to consider a new printer (for which I will get support) but currently the most likely candidate is going to be a move to Epson which would be a shame after over 15 years of sticking with HP.
I look forward to hearing of any possible solutions but please let me know if you need any further info from my end.

Sorry to hear you also have a similar issue. I tried every thing I knew but unfortunately due to the lack of support I gave up ,and ended up purchasing a new printer from a competitor after 15 years of using HP printers. It was a great shame as HP had always been the leading choice for me as a small business.

Hp support assistant report print

Similar Messages

Maybe you are looking for