HP1102 Driver failed to load and printer not recognized by Win8.1

Dear All,
I have very weird problem and for the last 3-4 days I couldn't succeed to find any tangible solution to that which cause me to pull my hairs. I have bought a HP LaserJet 1102 printer and have new laptop which stubbornly denies the installation of printer into the printer category, original smart isntaller always fails . It constantly getting installed as unknown device, but the name in device manager is correct under the unknown devices ( "HP LaserJet P1102").
I followed the http://h10025.www1.hp.com/ewfrf/wc/document?cc=tr&lc=tr&dlc=tr&docname=c03327635 instructions
wihtout sucess, printer is really not recognized by OS Win8.1. Runing the HP Print and Scan Doctor retrieves that printer is connected but the diver is not installed. So what am I supposed to do to solve that problem.
Your guidance will be appreciated,
Regards,

Hi @HP1102_User,
I see that you are having issues setting up the printer on Windows 8. The driver won't load and the printer isn't being recognized properly when running the Smart Install. I will certainly do my best to help you.
Is this printer the Laserjet P1102 or the Laserjet P1102w? How Do I Find My Model Number or Product Number?
Make sure the printer is connected directly to a wall outlet and the USB cable is connected directly to the computer. The USB cable shouldn't be longer then 6 feet. Try another USB port on the computer. You might have to try another USB cable to see if that is causing this issue.
Check the USB port on the Laptop, to see if it is a 2.0 or 3.0 port.
How to determine whether a USB 3.0 device is operating at SuperSpeed?
Try and update the driver from the Device Manager in Solution two: Software troubleshooting.
'Device setup failed to complete' or 'Unknown device' Message Displays in Windows during USB Install...
You can follow this document for either printer model.
Windows 8 steps: Click the Windows Key + X to open the Start Menu. Select Device Manager from the Start Menu. (if you are still having issue go back to the beginning of the document)
Then check the power management settings also in the Device Manager.
Select universal serial bus controllers from the list, for each USB root hub, right click and left click on properties, for power management remove the check mark for "Allow the computer to turn off this device to save power". It allows computer to limit or turn off power for this device.
If you are still having issues, download and try to install the newest drivers for the printer.
Delete the printer from the Device Manager and disconnect the USB cable first.
Temporarily turn off any Antivirus Software, to make sure it doesn't interfere with the install.
HP LaserJet Pro P1102 Printer Drivers.
HP LaserJet Pro P1102w Printer Drivers.
If you need further assistance, just let me know.
Have a great weekend!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Similar Messages

External USB hard drives working very slow and/or not recognized. Help!

This probably started after my Yosemite upgrade, but my external usb hard drives either aren't working well or not being recognized. It's taking forever to write files to my external Seagate Free Agent USB 2.0 through front ports and my thumb drives aren't mounting (they have shown up for a second or two, then nothing). Is there a fix? I'm on an early 2008 mac pro with Yosemite 10.10.2.
Thanks!

Do an SMC reset using this slightly-modified procedure:
Resetting the SMC for Mac Pro, Intel-based iMac, Intel-based Mac mini, or Intel-based Xserve
1.Shut down the computer.
2. Unplug the computer's power cord.
[2a. Press the power-on button to discharge the power capacitors.]
3. Wait fifteen seconds.
4. Attach the computer's power cord.
5. Wait five seconds, then press the power button to turn on the computer.
in all cases, the stated times are recommended minimums, and there are no maximums.
Intel-based Macs: Resetting the System Management Controller (SMC) - Apple Support

USB CDC-ECM driver failed to load on 10.5 & 10.6

Hi,
I'm using a device with ECM.
On 10.7 and up the AppleUSBCDCECM driver loads automatically and I have tethering.
But on 10.5 & 10.6 the driver fails to load and the tetheing doesn't work.
Someone have an idea?
Thanks,
Yaniv

Hmmm, in 10.5.8 PPC Mac I have version 3.2.13 of /System/Library/Extensions/IOUSBFamily.kext/Contents/PlugIns/AppleUSBCDCECMData .kext
And the same version of /System/Library/Extensions/IOUSBFamily.kext/Contents/PlugIns/AppleUSBCDCECMCont rol.kext
Is that what you have in 10.5?
Open console in Applications>Utilities, check the system log for the date/time of the last problem & the Startup right after that for clues.

T61 DVD/CD-RW drive fails to read and crashes

Hello Everyone, I hope people still visit this area of the forums!
I've highlighted and bolded the symptoms to make them easier to find.
I recently purchased a T61 6457-C15 on eBay, and have been in the proccess of setting up and customizing it to suit my tastes. When I recieved the laptop, it looked as though Windows had been restored to original factory state, plus some free software, so I proceeded under that assumption. First I used Windows Update to download all the updates that it could find including IE8. I wanted to have an anti-virus program running on my computer before I used a browser to access the internet. I ran IE8 and went straight to the Microsoft Security Essentials website and downloaded the Install program. At this point I tried to remove the pre-installed and expired Norton Internet Security using the built-in uninstall, but it failed. A message box popped saying that I needed to put the Norton installation disc in the CD-ROM drive so that the uninstall program could find a Norton support file. My computer did not come with any discs, but my mothe had bought Norton 2008, so I took that disc and put it in the drive. The drive started spinning right away, and the uninstall program found the file it was looking for in a few seconds. The support file directed me to the Norton website to get their removal tool, which removed Norton from my system in short order. Afterwards, I ran the Microsoft Security Essentials install program and got MSE running on my computer before doing anything else.
Then I went to the Lenovo support website and had it auto-detect my system. That took me to the support page for my system, where I went to the "Downloads and Drivers" page. I downloaded Access Connections and ThinkVantage Toolbox for Vista 32-bit (my OS is Vista Business 32-bit). I then used Lenovo System Update to retrieve all the updates it deemed neccessary from Lenovo, including those for itself and system components, both software and firmware. There were 35 or more updates suggested, and I trusted the software, so I started downloading them all. I'm not sure, but I think that a DVD/CD-RW drive update was included in the list, but I can't remember if it was auxiliary software, drivers or firmware. After Lenovo System Update was convinced that it had all the neccessary updates, I downloaded Revo Uninstaller and set about removing uneccassary and unwanted programs from my computer and trimming the startup list. I did not touch any Windows or ThinkVantage components, and I searched each program online, so I'm sure that I did not delete or disable any drivers or system files, or anything from Lenovo. I mainly removed Apple products and non-functional software from my system, including an integrated camera driver (my system does not have an integrated camera) and third-party programs that were already missing files or otherwise inoperable when I got my computer. Up to this point I had been using a gigabit ethernet connection to download software; I had not used the DVD/CD-RW drive except for the one time I specified earlier.
Now that I had my system set up to my liking, including personalization and power settings, I started to install my first program: Command & Conquer the First Decade from a DVD-ROM. When I put the disc in the drive and closed it, it took a few seconds for the drive to spin up, and once it did, it was constantly running at high speed and I could hear the reader constantly moving back and forth quickly. After a few minutes the disc's install menu finally appeared, so I clicked on the install button. I waited several minutes but nothing happened, so I tried to view the contents of the drive by going to My Computer > DVD/CD-RW drive (D, right clicking and selecting explore from the menu options. When I did that, the address bar of the My Computer window started to fill up with a dark gray progress bar and said "loading (D", I think with the drive or disc name after it. After it took several minutes to fill completely, nothing happened. I waited a few more minutes to see if anything would change, (nothing did,) I clicked on the X button in the top right corner of the window to close it. A few minutes and clicks later, the My Computer window was labeled as (not responding), and the window itself became grayed-out. I started Task Manager and tried to close the My Computer window, but the entire Windows Desktop disappeared along with it, saying that it would attempt to restart. Even Task Manager became non-responsive and quit after closing My Computer. After a few minutes of staring at my background (and nothing else), I ejected the disc, and Windows Desktop reappeared immediately and acted as if nothing had ever been wrong.
I checked Device Manager, but neither the DVD/CD-RW drive nor any of the ATA controllers were flagged; in fact they all said they were working properly with up-to-date drivers. I ran the ThinkVantage Toolbox diagnostics on the drive using a data CD, a music CD and a different DVD-ROM, but in each case the drive failed the tests and a message box popped-up saying that the discscould not be read because they were scratched or there was a hardware problem. I checked the discs both before I put them in and after I took them out, and they were not scratched; also, all of the discs are publisher-manufactured from a software or music company. I restarted my computer, booted the Rescue and Recovery option and Ran PC-Doctor from there. I ran the same drive read tests with the same failure results. The entire time the drive was behaving the same way it had when it first failed to read a disc. Next I removed and cleaned the drive both inside and out with a can of compressed air; I also cleaned the ultrabay itself. Finally I tried fixing the problem with Microsoft Fix It, but when it automatically ejected the drive and i put a disc in, the disc became trapped in the drive and Windows froze up like before. I had to restart Windows twice (once with a BSOD) in order to get the disc out. When the disc was removed the computer went back to normal operation once again.
Please help me, my DVD/CD-RW drive is a Matshi ta UJDA775, my operating system is Windows Vista Business and my T61's model number is 6457-C15. I have tried all the troubleshooting fixes and none have worked. I have tried updating drivers and using diagnostic software and they have not worked. I have tried disabling drag-to-disc burning and it has not worked. I have treid removing and cleaning the drive and that has not solved my problem. I did notice that the driver for the "Intel(R) ICH8M-E/M SATA AHCI controller" is the only related driver that can be rolled back, so maybe that might fix it. I'm also wondering if a firmware change caused this, and if so, if there is any way I can undo that. The only other fix I've heard of that I haven't tried is editing the registry, but I'm hesitant to do that. I haven't tried booting from the CD drive because I have no bootable CDs and I'm worried that my computer might get stuck in that mode. I'm hoping that someone can tell me what I can do to try to fix this problem, preferably without wrecking my computer. Thank you for taking the time to read my post.
P.S. Just adding a note; I went through both the Microsoft and Lenovo Update histories and the only related updates I could find were: ThinkPad BIOS update, Easy Eject utility, Intel Matrix Storager Manager driver for Windows (32-bit), and maybe one of the two Intel Chipset Support for Vista updates. I tried rolling back the AHCI driver but it had no effect.
Solved!
Go to Solution.

Well, my problem is fixed, and here's how. I had some trouble figuring out how to contact Lenovo technical support; online options directed me to the IBM support website, which was clearly designed for businesses. Selecting the "Call technical support" option on the Lenovo support website and then choosing my country gave me a 24/7 hotline number. After waiting about five minutes on hold, a nice young fellow by the name of "Tyrese" answered (I maybe misspelling his name), but the connection was so bad that we could barely hear each other. Although he semed eager to help, when I told him my problem the first things he suggested were simple, like cleaning the drive, However, when I told him all of my efforts, described above, to fix the problem myself and read him the log from the Rescue and Recovery diagnostic program, after he checked the error codes against his computer database he promptly replied that the only fix was to send out a new drive. I was happy to have gotten such a successful resolution to a support call in less than fifteen minutes; apparently, all the work I had done trying to solve the problem myself had paid off in a way. Unfortunately, although I had tried to spell out my address for him, some of it got left off of the address label, which caused some trouble in receiving the new drive. Once I got it, I installed it using the uninstall & remove (old drive), shut down, start up, insert & install (new drive) method that I referenced earlier in this topic. I've been using the new drive since then without any trouble, so I guess that the only fix was to replace the drive. Also, I noticed that the new drive was a Hitachi, perhaps a T400/410 or T500/510 Ultrabay Slim drive, which should help me avoid the problems that other users were having with the older Matshi-ta drives. I hope this description helps anyone else having a problem with the optical drives on the T61/61p.

A required application library failed to load and the product cannot continue

Seems like I go through this problem time and again with Photoshop + Acrobat CS2 and still have yet to resolve a way of fixing it short of completely wiping my drive and re-installing Windows (XP Pro) The error is "application library failed to load and the product cannot continue"
If there is anyone out there that has figured out a way to fix this issue please fill me in.
This time I went as far as a complete and though removal of all Adobe products from the system and the registry and then completely reinstalled the product.
I have forgone purchasing CS3 because of this issue as I am 99% sure that it has still not been resolved.
Basically Photoshop and Acrobat are useless at this point and I am using an old version of Picture Publisher and Macromedia Fireworks to complete my work. This I assume is good advertising for Adobe :)
Anyone have any ideas????
See this post in the forum "could not complete your request because of a program error", PDF format, cs2, xp" as this is an ongoing Adobe issue that they have completely blown off!
I am working on
Adobe Photoshop Version: 9.0.2 (9.0.2x296)
Operating System: Windows XP
Version: 5.1 Service Pack 2
System architecture: Intel CPU Family:15, Model:2, Stepping:9 with MMX, SSE Integer, SSE FP, SSE2, HyperThreading
Physical processor count: 1
Processor speed: 2798 MHz
Built-in memory: 2559 MB
Free memory: 1812 MB
Memory available to Photoshop: 1758 MB
Memory used by Photoshop: 55 %
Image cache levels: 6
Serial number: XXXXXXXXXXXXXXXXXX (I have a legal copy)
Application folder: C:\Program Files\Adobe\Adobe Photoshop CS2\
Temporary file path: C:\DOCUME~1\JIMSHE~1\LOCALS~1\Temp\
Photoshop scratch has async I/O enabled
Scratch volume(s):
Startup, 128.0G, 65.5G free
Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS2\Plug-Ins\
Additional Plug-ins folder: not set
Installed plug-ins:
ADM 3.10x21
ASDStrm 1.03x2
Accented Edges 9.0
Angled Strokes 9.0
Average 9.0 (9.0x196)
BMP 9.0 (9.0x196)
Bas Relief 9.0
Camera Raw 3.7
Chalk & Charcoal 9.0
Charcoal 9.0
Chrome 9.0
Cineon 9.0 (9.0x196)
Clouds 9.0 (9.0x196)
Color Halftone 9.0 (9.0x196)
Colored Pencil 9.0
CompuServe GIF 9.0 (9.0x196)
Conditional Mode Change 9.0 (9.0x196)
Contact Sheet II 9.0 (9.0x196)
Conté Crayon 9.0
Craquelure 9.0
Crop and Straighten Photos 9.0 (9.0x196)
Crop and Straighten Photos Filter 9.0 (9.0x196)
Crosshatch 9.0
Crystallize 9.0 (9.0x196)
Cutout 9.0
Dark Strokes 9.0
De-Interlace 9.0 (9.0x196)
Difference Clouds 9.0 (9.0x196)
Diffuse Glow 9.0
Displace 9.0 (9.0x196)
Dry Brush 9.0
Embed Watermark 1.70.19
Export Transparent Image 9.0 (9.0x196)
Extract 9.0 (9.0x196)
Extrude 9.0 (9.0x196)
FastCore Routines 9.0 (9.0x196)
Fibers 9.0 (9.0x196)
Film Grain 9.0
Filmstrip 9.0 (9.0x196)
Filter Gallery 9.0
Fit Image 9.0 (9.0x196)
Fresco 9.0
Generic EPS 9.0
Glass 9.0
Glowing Edges 9.0
Grain 9.0
Graphic Pen 9.0
HDRMergeAlign 9.0x001
HDRMergeUI 9.0x001
Halftone Pattern 9.0
Ink Outlines 9.0
Lens Blur 9.0
Lens Correction 9.0
Lens Flare 9.0 (9.0x196)
Lighting Effects 9.0 (9.0x196)
Liquify 9.0
MMXCore Routines 9.0.1 (9.0.1x289)
Merge to HDR 1.0x001
Mezzotint 9.0 (9.0x196)
Mosaic Tiles 9.0
Multiprocessor Support 9.0 (9.0x196)
NTSC Colors 9.0 (9.0x196)
Neon Glow 9.0
Note Paper 9.0
Ocean Ripple 9.0
OpenEXR 9.0 (9.0x196)
PCX 9.0 (9.0x196)
PNG 9.0 (9.0x196)
PNG Icons 1.22x1
Paint Daubs 9.0
Palette Knife 9.0
Patchwork 9.0
Paths to Illustrator 9.0 (9.0x196)
Pattern Maker 9.0 (9.0x196)
Photo CD 9.0 (9.0x196)
Photocopy 9.0
Photomerge 9.0 (9.0x196)
PhotomergeCylmap 9.0 (9.0x196)
PhotomergeRender 9.0 (9.0x196)
PhotomergeUI 9.0 (9.0x196)
Picture Package 9.0 (9.0x196)
Picture

John,
foud your message very helpfull. I experience the same problem when strating a CS2 program (Photoshop, Indesign,...) over a terminal server connection.
It's weird because starting more than one instance is possible (despite what's written in the article ) as long as the users have administrative rights. I've encountererd this problem because my daughter of 11 wants to use Photoshop now. I have a terminal server set up so the kids may experiment with their own desktops whithout the risk to screw it up and because I can access all my programs from wherever I want.
But as I found out now I must buy volume licensing instead of retail (even if it's for just one instance...)
Want to know if possible how "difficult" it was to change your retail to a volume licensed version? Did you have to pay the full amount again? Hope an upgrade exist from Creative Suite CS2 - retail to Creative suite CS3 - volume licensed for the same price as from retail to retail... Or am I hoping to much?
Kind regards and thanks for your info,
Patrick

Photoshop failed to quit and is not responding

I've had a nasty problem for the past few days that seems to be getting gradually worse. ie it now happens within a few minutes of openning Photoshop, whereas before it was happenning after an hour or two of working on an image....
At some point while working on a moderately complex .psd (roughly 70mb with some 15 layers) Photoshop hangs and Force Quit Applications tells me that Photoshop is not responding. I can't identify anything particular that i'm doing that triggers it.... i use a fairly wide variety of tools and filters and the hang doesn't seem to be triggered by anything specific.
I force Photoshop to quit, and it disappears from the Force Quit Application list. However, after quitting, I cannot open .psd or .jpg files from Bridge or from Finder. Raw files open up ok from Bridge into Camera Raw. And, when I try to shut down or restart my machine i get: " Logout has timed out - The application Photoshop failed to quit and is not responding." so the only way to restart is to force a shut down with the power button. After restarting the Mac Photoshop works ok again for a a while and then the problem happens again.
I have repaired my disk permissions and run Diskwarrior over both my Mac HD ad the external Firewire drive where all my images live - which didn't identify anything out or the ordinary.
Any thoughts on what else I can do to eliminate this problem would be v gratefully received
I am working on a Dual-Core Intel MacPro with 9GB memory, running OS 10.4.11 and Photoshop CS3 10.0.1 and Bridge CS3 2.1.1.9

Neil, just for reference the Cron script problem was fixed in 10.4.2 and should be run on boot if they haven't already. This doesn't mean that running cocktail occasionally to make sure doesn't have value or to run the maintance scripts early doesn't help (it wont hurt).
Nick
The 3 Gb limitation is a limitation of 32bit operating systems and software. Photoshop can't address (use) more than 3Gb regardless of how much you have free or installed. OSX 10.4 is kind of 64bit but not completly, it has the ability to remap memory so EACH program can use a max of 3Gb. so in your case with 5ish Gb used PS is using 3Gb, Safari is using a bit and the OS is prob using most of the rest.
Looking at what you posted the only two figures your really interested in is the Used and Free (which add up to approx 9Gb). The fact that the used number doesn't change from the several files open and the liquify filter opening indicates to me that it has already grabbed as much memory as it can( it's using 3Gb of the 5.52, the rest is the OS etc).
Simply put PS IS running out of memory. You can help this by putting the memory allocation in the PS preferences higher (the OS will use other areas of memory so it wont cause a problem) and make sure the scratch disk is set to a drive with plenty of space. But keep in mind the Liquify filter is VERY memory intensive so you may not be able to use it with lots of files open.
BRETT

DBDriver failed to load dbd_oci.dll (not a valid Win32) (WIS 10901)

Dear Gurus,
I am trying to access universe through WEB INTELLIGENCE but the connection is giving me following error
DBDriver failed to load dbd_oci.dll (not a valid Win32) (WIS 10901)
"A database error occured. The database error text is: (CS) "DBDriver failed to load : C:\Program Files (x86)\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\dataAccess\connectionServer\dbd_oci.dll (%1 is not a valid Win32 application.
)" . (WIS 10901)"
As per the documentation , web intelligence uses BO server connection while tools like Designer uses local connection.
I am working on BO server only , both tool should use the same connection.
OS : MS WIndows 2003 R2 64 Bit
BO Server : bosmserv
Oracle : Oracle 10.2.0.4 , client 10.2.0.4
Connection to database schema is working through universe designer and System DSN but not through Web Intelligence.
In addition JDBC connection to the same databse schema is giving me following error CS: Java Class not found in classpath : oracle.jdbc.OracleDriver
Please suggest.
Note : I have already applied following note :
1378354 - If we create the webi document, the error occured "The specified module could not bi found(dbd_oci.dll), (WIS 10901)"
Regards
Arif

Hi All,
I had tried many ways but I still can't solve this error, can anyone tell me how to solve it?
OS of the Server: Windows Server 2008 R2 Enterprise 64 bits
SAP BO : BI 4.0 with SP2
DB: Oracle 11g , 64 bits
Problem: When I create a new relational connection in Information Design Tools, it pop up an error state that:
DBDriver failed to load : ...SAP BusinessObjects\SAP BusinessObjects Enterprise XI 4.0\dataAccess\connectionServer\drivers\lib32\dbd_oci.dll (%1 is not a valid Win32 application.)
So far What I had done are:
1) I checked the PATH windows variable and the D:\app\oracle\product\11.2.0\client_1\bin directory is inside the PATH.
2) Restart SIA and Server
3) I download the Install Client and this do not solve the error also.
I can connect to the Oracle by using SQLPLUS and TNSPING also can ping the oracle database.

Creative Cloud is taking too much time to load and is not downloading the one month trial for Photoshop I just paid money for.

Creative Cloud is taking too much time to load and is not downloading the one month trial for Photoshop I just paid money for.

stop the download if it's stalled, and restart your download.

I have many photos with file extension of .PDD and that Photo Deluxe 4 no longer will operate in Win 7. How can I open? Next in Elements 11, how do I load and print different pictures and different sizes options on the same page?

I have many photos with file extension of .PDD and that Photo Deluxe 4 no longer will operate in Win 7. How can I open? Next in Elements 11, how do I load and print different pictures and different sizes options on the same page?
Thanks,
Shir

sbmgrams wrote:
I have many photos with file extension of .PDD and that Photo Deluxe 4 no longer will operate in Win 7. How can I open?
See here:
Reading PhotoDeluxe PDD Files

Hi, I set up my new iPhone S4 with iclouds. So the data of my old S3 should move to the S4. However, some applications could not be loaded on the S04. Now some apps are loaded and others not . How can I progress?

Hi, I set up my new iPhone S4 with iclouds. So the data of my old S3 should move to the S4. However, some applications could not be loaded on the S04. Now some apps are loaded and others not . How can I progress?

Thanks. I can change the forwarding settings in Gmail to be either POP or IMAP. That is quite simple. I just looked at those settings on the Gmail server and, to my surprise, both are enabled. In order for outlook client on my computer to receive IMAP emails I have to change the email account settings in my current outlook from POP to IMAP. I don't need to be using the Exchange version of Outlook to receive IMAP. I guess I'll do a little research tomorrow on Exchange so i can figure out what, if anything, it might do for me.
I glanced at the link you sent me and it looks like it might be very helpful - another project for tomorrow.
BTW: I hit "This Solved my Question" by accident. I meant only to "like' your response so you would get some benefit from the help you've given me so far. I hope I haven't discouraged others from taking a shot at helping me. I suspect there is more than one way to approach this and, as you know, my problem isn't really solved until I have what I need all set up and running smoothly.

After syncing Firefox with my Android phone, Google calendar is not functional. It hangs on "Loading" and will not allow updates or edits. Calendar works in IE, just not Firefox on any computer. Clearing cookies and cache no help.

I synced Firefox with my Droid Razr Maxx Firefox. Now Google Calendar hangs on "Loading" and will not function. Clearing cache and cookies does not help. Works the same on any computer Firefox. But Gmail works fine and Calendar is okay under other browsers.

Do a malware check with some malware scanning programs on the Windows computer.<br />
You need to scan with all programs because each program detects different malware.<br />
Make sure that you update each program to get the latest version of their databases before doing a scan.<br /><br />
*http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
*http://www.superantispyware.com/ - SuperAntispyware
*http://www.microsoft.com/security/scanner/en-us/default.aspx - Microsoft Safety Scanner
*http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
*http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
*http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
See also:
*"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

I downloaded xbmc to my MacBook Pro and the application failed to quit and is not responding it is telling me to press continue to logout but the track pad is not responding what do I do?

I downloaded xbmc to my MacBook Pro and the application failed to quit and is not responding it is telling me to press continue to logout but the track pad is not responding what do I do?

Press and hold the power button until the machine turns off. Then restart.
Clinton

DVD drive has DVD stuck and will not eject or read DVD? DVD is 4 months old. What do I do?

DVD drive has DVD stuck and will not eject or read DVD? DVD is 4 months old. What do I do?

Try issuing this command in the Terminal application followed by the Return or Enter key:
drutil eject
Might take several attempts
OT

Airport fails to load and even to be reconfigured via wifi

airport fails to load and even to be reconfigured via wifi

Hi All,
Thanks for your responses.
I configured the SQL agent service to use my domain account with which I have no porblems accessing the folder. However the issue persisted.
Thanks,
Andrei
SSIS question

Photo Elements 11 fails to load and rolls back when it starts 'installing shared services'

Photoshop Elements 11 fails to load and rolls back as soon as it switches to 'installing shared services'. How can I overcome this? Premier Elements is already loaded and works fine including the Organiser. Photo Elements 10 is still on the system and also works fine.
System - Windows 7 OS1

Hello
I have tried that previously, it didn’t work then and it doesn’t now.
What I have just done is run the installation until it came up with the error message and killed the set-up file & windows installer. Photoshop elements seems to be almost installed. Organiser works for both Premier & Photoshop. What files etc would have been loaded from the point of the error message? The installation worked on a borrowed laptop (on 30 day trial). Hopefully all I need to do is copy the missing files across if you could advise what they are.
Regards
Bryan

HP1102 Driver failed to load and printer not recognized by Win8.1

Similar Messages

Maybe you are looking for