HR Benefits - EOI  for Life Insurance

Hi,
We have noticed that EOI is being required when the insurance coverage amount goes down as well as up for coverage level changes.
Is this an expected result?
We have configured "Change of Coverage" at 1x Salary and thought it only applied to increases.  For example, going from 1x to 3x would require EOI, but going from 3x to 1x would not. 
Has anyone else had this experience? 
Thanks,
Terry

Thanks.
The EOI report monitor is what they are using to administer EOI.  The config condition as previously described is "Change of Coverage" at 1x Salary for this Life Insurance.
I am trying to ascertain whether coding EOI for a "change" means changes up and down to SAP.
Terry

Similar Messages

  • HR Benefits - Age limit  for Life Insurance,

    Hi,
    If we want to create an upper age limit for spousal life insurance and employee life insurance plans that already exist, what is the best method for each?
    For the spousal insurance, the Define Dependent Eligibility Rules seems to only apply to medical plans.  Looks like you can only create beneficiary eligibility for insurance plans.
    Thanks Terry

    Hi,
    Jay - "Define Dependent Eligibility Rules" is where I could only find medical plans.  The life insurance only seems to allow beneficiary criteria.
    Ram - I had tried the Age grouping, but it looks like it's controlling coverage costs.  So if I create an addtional age range with a cost of $0, they could still have the plan. But they really shouldn't have it any longer.  I want them to show up on the participation monitor.  At least this was my interpretation.   I thought this may be a pretty common requirement. 
    Terry

  • On my computer I apply for unemployment benefits at the Unemployment Insurance Agency web-site. Just recently, when I log in for benefits, I get to the second page, and I get automatically kicked back to the log-in page.

    On my computer I apply for unemployment benefits at the Unemployment Insurance Agency web-site. Just recently, when I log in for benefits, I get to the second page, and I get automatically kicked back to the log-in page. I went to my local library, and I do not have this problem. I do not understand why I can log in, get to the second page, then I click proceed and I have to start all over without ever getting to the third page. Can someone figure this out?

    Yes AT&T is my ISP. I use DSL. Currently I am not at my home address. I am currently on a cable modem on COX.com.
    I am also receiving a warning message "WARNING: Parental control appears compromised!".

  • Imputed Income for Dependent Life Insurance

    We are trying to configure Imputed Income for Dependent Life Insurance and having issues with the amounts being calculated.
    Using the formual proivded by the IRS the imputed income is calculated as follows:
                                                  Dependent
    Age                                              57
    Coverage Amount                        375,000.00
    Less IRS Allowance                                   0.00
    Taxable Coverage                        375,000.00
    Divided by 1000                               375.00
    IRS table factor                                   0.43
    Imputed Income                               161.25
    Less amt paid w/h post tax                        (124.13)
    Adjusted Imputed Income per IRS calc           37.12
    SAP calculates the folliwng amounts though. One question is our uncertainty as to which of theswe two WT's is the inouted income.
    Imputed Income From SAP                              57.67 /bd1
    Imputed Income From SAP                              18.74 /bt2
    Any suggestions where to look to get this resolved?

    Hello Brent,
    I believe that you are talking about wagetype /BT1.
    /BD1 - EE Dep. GTLI Cost
    This wage type represents the group term life insurance premium costs for an employee's dependent.
    /BD2 - EE Dep. GTLI Coverage
    This wage type represents the group term life insurance coverage amount for an employee's dependent.
    /BT1 - This wage type represents a group term life insurance premium
    (employee's dependent) amount which is taxable.
    Regards,
    Manny

  • Spouse life insurance for same *** spouse

    We are configuring our health/insurance plans to allow same *** spouse as a dependent/beneficiary/enrollee.  We were advised to create a new subtype for family member called ‘Same *** Spouse’ rather than just using the existing ‘Spouse’.  The problem we are running into is on our Spouse Life Insurance.  SAP only allows costs to be determined based on the age of either the Employee, the Spouse or the Domestic Partner.  We are not able to choose the new Same *** Spouse.  Has anyone found a way around this?  How is everyone handling Same *** Spouses (for legally married spouses).   Are you just using the existing Spouse relationship?  If so, has that caused any issues elsewhere?

    Hi,
    I'm not sure why you want to use a different subtype. Spouse is not gender specific so it can be used for same *** partner as well (you will get a warning message saying that the gender is the same but it will be possible to save the record and thus have the same functions), and this is the recommended process.
    It will make the rest of the configuration much more easier. I actualy believe that it might be discriminatory to have different suptype for same *** spouse, which is probably why SAP did not provide a specific subtype in the the first place.
    Best regards
    Sarah

  • AddOn for a small Car and Life Insurance company, Policy management

    Hi Everybody,
    I am looking for an AddOn for a small Car and Life Insurance company.
    I am interested in policy management
    Do you know if there is any in the market?
    Thanks

    Hi,
    You need to search SAP Business One Partner Solutions (Add-ons) forum and posted it there if you find none.
    Thanks,
    Gordon

  • Adding beneficiary to Optional Life insurance in ESS creating new record

    Hi,
    We have a insurance plan called Optional Life Insurance. IN the portal (ESS) when a employee adds a new beneficiary to this plan, system is creating a new pending record by delimiting the old record to end of that month. The problem is the newly created pending record is asking for EOI (evidence of Insurability).
    Adding or deleting of beneficiaries in portal is resulting in EOI being asked. When the same process is done through GUI, there is no problem.
    The EOI setting for action in IMG for this plan is "Create Pending record for desired option".
    (But this setting is only for enrollment, this should  not be reflected when beneficiary is added or deleted, right?)
    Regards
    Kiran.

    Anyone faced such problem before? Any clues?
    Thanks.

  • Benefits enrollment for a single employee without spouse

    Currently on ECC6 (ERP 2005) and EP7......We have an enrollment reason for "anytime" reasons and within that, several plans are offered, one of which is spouse life insurance. On the backend, this works fine (ie. via PA20/30) however, for the ESS side of things, we seem to have an issue.....
    Now, first off, for a single person, this would cause an error message to pop up saying the spouses' date of birth could not be determined (used in the insurance calc, I suppose) since the person did not have a spouse. Doh! Sooooo we applied a note that implements a BAdi and removes the error.
    (notes applied:
       - 861657 Missing spouse information during benefit enrolment
       - 1012001 BADI Correction for ERP 2005   )
    Problem now however, the error does not show, but the user STILL has no plans offered to them. If we add a spouse, viola...they all show up. If we keep the person without a spouse and simply remove that plan from the enrollment....still no plans offered.
    Ideas?
    (posted in the HCM forum as well)

    Found and fixed ! Additional notes had to be applied....
    Note 999510 - ESS:webdynpro application do not display any benefit plan
    and the main one that fixed it....
    Note 973390 - No Benefit plans are displayed for Adjustment Reason
    Hope this helps others!

  • Benefits enrollment for single employee without spouse

    Currently on ECC6 (ERP 2005) and EP7......We have an enrollment reason for "anytime" reasons and within that, several plans are offered, one of which is spouse life insurance. On the backend, this works fine (ie. via PA20/30) however, for the ESS side of things, we seem to have an issue.....
    Now, first off, for a single person, this would cause an error message to pop up saying the spouses' date of birth could not be determined (used in the insurance calc, I suppose) since the person did not have a spouse. Doh! Sooooo we applied a note that implements a BAdi and removes the error.
    (notes applied:
       - 861657 Missing spouse information during benefit enrolment
       - 1012001 BADI Correction for ERP 2005   )
    Problem now however, the error does not show, but the user STILL has no plans offered to them. If we add a spouse, viola...they all show up. If we keep the person without a spouse and simply remove that plan from the enrollment....still no plans offered.
    Ideas?
    (posted in the self-services forum as well)

    Found and fixed ! Additional notes had to be applied....
    Note 999510 - ESS:webdynpro application do not display any benefit plan
    and the main one that fixed it....
    Note 973390 - No Benefit plans are displayed for Adjustment Reason
    Hope this helps others!

  • Credit Life Insurance Fee on BB credit card charges since 2004

    Wow, I am in awe that this has been charged to my account since 2004 even though I never authorized it.
    I even called and had it cancelled in 2004 but I believe it gets added everytime you make a purchase at Best Buy.
    It is currently at $600 a year.
    I called today to get it cancelled again and requested I be reimbursed for all charges.  I was told it has been cancelled and would get a letter in 30 days as to the status of my request.  At this time, I will not be using the credit card ever again nor shop at Best Buy until this is resolved completely to my satisfaction.
    I plan to complain to BBC, FTC and any other source I can to get reimbursed.
    No other credit card I have does this to me.  Granted, I do not look at my monthly statements for all my accounts, something caled TRUST that I grew up with.
    {removed per forum guidelines}
     

    Hello, brakford, and welcome to the forum,
    Having the Credit Life Insurance program on your credit card can be truly helpful should you ever find yourself in an unexpected situation. I certainly would be furious to find I was paying for it for 11 years without my knowledge though, especially if I was under the impression it was cancelled long ago.  I’m sorry to hear of the struggles you’ve encountered while trying to resolve this on your own.
    Citibank, N.A. is the issuer of your My Best Buy credit card account. As such, we don’t have visibility into your account to see what might have happened. Having said this, I will be glad to share your inquiry with our Citibank contacts for further review. In order to do this, please know I’ve sent you a private message to gather some additional information. You may view it by logging into the forum and clicking on the envelope icon in the upper right-hand corner of the page.
    Thank you for posting,

  • Benefits Offering for Non-Employees and Retirees

    I am looking for those of you who have experience in setting up Benefits Offerings for Non-Employees and Retirees.

    We can set up different rates based on this criteria and if the business agrees to provide the data before we process Opne we have no problem. But, this is not ideal for them. My question is has anyone set up a field (what field if you have?), put it on a self service page before the enrollments page and then triggered the Open life event to reprocess based on updating this field? If so, how have you done this? Are there any other ways of allowing employees to choose smoker/non smoker before they get to the enrollment page but during the self service window for Open, and then having the enrollment page reflect only the rates based on their choice? Thanks again for your help.
    Gay

  • Or some reason everytime i got to my membership for pet insurance it says wrong password the i go back to IE 11 and it lets me sign in with the same password...

    for some reason everytime i got to my membership for pet insurance it says wrong password then i go back to IE 11 and it lets me sign in with the same password...What gives..do I have to have 8 different browsers to get into certain accounts...lol...help

    Hi vikadelic,
    Do you store your passwords in the browser? If so, you may want to update them to make sure that they are trying to login with the right credentials: [[Password manager - Remember, delete and change saved passwords in Firefox]]
    If that is not the case, it may be an old stored cookie: [[Delete cookies to remove the information websites have stored on your computer]]

  • New Price increase for Free Multi Room DVR for Life?

    My Free Multi Room-DVR for Life has gone up again, but not my discount. How is this posible? This makes no sense to be. An increase in old equipment in my own house.

    Just a friendly reminder, this is a forum where users help other users. It looks like your issue may require a Verizon representative to review your account details. Please visit our Support page for a variety of ways to contact Verizon, including “Ask Verizon,” our virtual chat agent, and customer support phone numbers.

  • I need a copy of the tech report from the genius bar for my insurance but never received one. Can I get a copy?

    As it says in the title, my 8 month old (reconditioned) 4S needed replaced. I took it to the genius bar but they didn't give me a report only sold me a replacement. I need a copy of the report for my insurance company. Can I get a copy via my apple ID? Help appreciated!

    You'll have to either call AppleCare...they'll have a record, or go back to the Genius bar where your phone was replaced.

  • I am planning to switch to the "iPhone for Life Plan" with unlimited data.  How do i determine what the balance is on my equipment installment plan?

    I am planning to switch to the "iPhone for Life Plan" with unlimited data.  How do i determine what the balance is on my equipment installment plan?

    Yes I am considering switching from the VZ Edge to Sprint iPhone for Life plan.
    Thanks,
    Adrian
    >> Personal information removed to comply with the Verizon Wireless Terms of Service <<
    Edited by:  Verizon Moderator

Maybe you are looking for