HR Renewal 1.0 FP4 navigation fails via Portal

Hi All,
We have installed HR Renewal 1.0 FP4. We are trying to use the ESS HR Launch Page (UI5) via the SAP Portal 7.3.1 SP9. The Launch page appears correctly but when
clicking the on Leave Request the Web Gui opens and the SAP Easy Access Menu
appears instead of the relevant UI5 Screen.
We have implemented the following notes:
1864001 - Resolving of system alias for launchpad service
1956146 - Shell API support for navigation with system alias in Enterprise Portal
Using HTTP Watch we have noticed that the link is resolved to the following:
http://<host_name>:<host_port>/sap/bc/gui/sap/its/webgui/sap/bc/ui5_ui5/HRESS_LEAVREQ_G/index.html
instead of
http://<host_name>:<host_port>/sap/bc/ui5_ui5/sap/HRESS_LEAVREQ_G/index.html
It seems that this is related to the Web AS Setup for the
relevant System Connector in the Portal, which is maintained as follows:
ICM Host Name: <host_name>:<host_port>
ICM Protocol: http
ICM URL Prefix: /sap/bc/gui/sap/its/webgui
Is there any recommendation on how to set up the Web AS or any idea of how to overcome this issue?
Thank
you in advance,
Michael

Let me explain the usage of reverse proxy, web dispatcher needs to be setup as reverse proxy if you choose gateway to be setup in different system. With HCM Renewal 1.0, we introduced HTML5 landing pages. We call it the lanes landing pages. The lanes landing pages has two facets two it - the User Interface (UI) - the Data The UI requires the UI5 add-on. This is something which you have already installed. The data for the UI is served up from the Backend system as a OData service via the Gateway system. The landing page needs a reverse proxy to direct the browser requests to either the back-end system where the JavaScript sources are stored, o or to the SAP Gateway system where the OData services are located " Like any Web Application, the HTML5 artifacts (html, js, css) are loaded on to your browser the very first time the landing page application is launched. For this, the browser makes a http requests to the backend system where the artifacts are stored. Once the artifacts are loaded, subsequent calls will be to fetch data from the HCM backend. HCM backend data is exposed as OData services via the Gateway. NW Gateway provides the infrastructure required to convert HCM (ERP in general) data to application/device friendly OData services.Hence Gateway is an intergral part of the whole product. In short: The Reverse proxy talks to the backend HCM system once in a session to load the html5 artifacts. But it communicates with the gateway system whenever data is requested.

Similar Messages

Data import from EBS failed via FDMEE in fdm . Getting error message as "Error connecting to AIF URL.

FDM Data import from EBS failed via FDMEE after roll back the 11.1.2.3.500 patch . Getting below error message in ERPI Adapter log.
*** clsGetFinData.fExecuteDataRule @ 2/18/2015 5:36:17 AM ***
PeriodKey = 5/31/2013 12:00:00 AM
PriorPeriodKey = 4/30/2013 12:00:00 AM
Rule Name = 6001
Execution Mode = FULLREFRESH
System.Runtime.InteropServices.COMException (0x80040209): Error connecting to AIF URL.
at Oracle.Erpi.ErpiFdmCommon.ExecuteRule(String userName, String ssoToken, String ruleName, String executionMode, String priorPeriodKey, String periodKey, String& loadId)
at fdmERPIfinE1.clsGetFinData.fExecuteDataRule(String strERPIUserID, String strDataRuleName, String strExecutionMode, String strPeriodKey, String strPriorPeriodKey)
Any help Please?
Thanks

Hi
Getting this error in ErpiIntergrator0.log . ODI session ID were not generated in ODI / FDMEE. If I import from FDMEE its importing data from EBS.
<[ServletContext@809342788[app:AIF module:aif path:/aif spec-version:2.5 version:11.1.2.0]] Servlet failed with Exception
java.lang.RuntimeException
at com.hyperion.aif.servlet.FDMRuleServlet.doPost(FDMRuleServlet.java:76)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:301)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:324)
at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:460)
at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:163)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3730)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3696)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2273)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2179)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1490)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)

HR Renewal 1.0 FP4 and Standard Process

Hi,
We had recently installed HR Renewal 1.0 FP4 in our sanbox client
and when we checked the tcode HRASR_DT which is design tool for
HCM Processes and Forms under Forms and Scenarios standard forms are
listed but we don't see standard process. We tried to copy the
processes from Client 000 based on a document below and we dont see
anything under piece list HRASR_PROCCONTENT_VP in client 000 .Are we
missing any steps does the HR Renewal doesn't come up with standard
processes.
http://scn.sap.com/community/erp/hcm/blog/2012/03/21/hcm-processes-forms-mystery-of-the-missing-sample-processesor-where-are-the-pd-processes
Do we have any documentation to copy standard processes?
Thanks,
Latha.

1. Most of the process delivered for HR Professional role are based on FPM forms
Sample Processes for Personnel &amp; Organization - HCM Processes and Forms - SAP Library
2. To understand FPM based forms refer blog by Christopher Solomon here HCM Processes & Forms: the Anatomy of a FPM Form and the Secrets of How HR Renewal HCM P&F Delivers Yours
3. For testing purposes you can refer to sample process listed by Siddharth.
Regards.

Failed to send mail to external domain via portal

Hi Gurus,
By following the configuraion instructions in SAP library - Collaboration - Groupware - Installing and Configuring E-Mail Connectivity, I managed to send mail to recipients who reside in same domain e.g. [email protected] via portal.
However, I failed to send mail to external domain e.g. [email protected]. I got the following error message:
The mail could not be sent to the specified recipients com.sap.ip.collaboration.gw.impl.transport.javamail.exception.MailSendException: The mail could not be sent to the specified recipients
 at com.sap.ip.collaboration.gw.impl.transport.javamail.JavaMailTransport.sendMail(JavaMailTransport.java:183)
--------- exception is chained. Original exception ------------
javax.mail.SendFailedException: Invalid Addresses;
nested exception is:
 javax.mail.SendFailedException: 553 sorry, that domain isn't in my list of allowed rcpthosts (#5.7.1)
 at com.sun.mail.smtp.SMTPTransport.rcptTo(SMTPTransport.java:804)
 at com.sun.mail.smtp.SMTPTransport.sendMessage(SMTPTransport.java:320)
Please help.
Thanks alot.

Hi Ajey,
Thanks for your reply. I had tried your suggestion but same problem occurred with same error output.
Actually, I encounterred this error message before in my Microsoft Outlook, where System Admin returned me a mail saying that, my mail was undeliverable with the same error message. But this can be solved by applying the Internet Email Account Setting - Outgoing Server - My outgoing server (SMTP) require authentication.
So I am wondering,
1) This problem is caused by SMTP server?
2) Is there any workaround (like the Outlook Setting) I can configure in Portal?
Do you have any idea?
Thanks,
HauChee

Are video navigation points via buttons still unsupported in DPS?

Are video navigation points via buttons still unsupported in DPS? i'd like a video to play but have buttons to the side the give the user the option to play the video from certain points.

This guy has done a nice job :-)
http://chrisgannon.wordpress.com/2012/04/06/greensock-javascript-adobe-edge/

Backing up KM Folders via Portal Drive

Hi Experts,
We've implemented Netweaver Portal 7.0 with SP14 for a local company. Company migrated all shared folders from filesystem into KM via Portal Drive.
Portal is running on a VMWARE machine with Linux OS.
Followings are common questions, when we implement a Document Management SYstem on KM. I'm writing my answers but need help in Q2 esp.
Q1: How to backup files in KM?
A1: KM repostory is default DBFS mode ad all files within KM are stored in DB. So backing up DB means backing up KM thus all files.
Q2: How to backup/restore single/multiple files in KM in case of accidental deletion?
A2: In case of accidental deletion, with SP14 "Deleted Items" functionality given to KM and you can view and restore files deleted.
In case of permanent deletion, there is no option for KM file backup/restore other than DB.
Here we tried to simulate something following to backup files and restore in case of problem just like FileSystem document management:
On Backup Server, we installed Portal Drive and mapped the Portal KM Folders.
Then created a FileSystem backup on this mounted FS. But unable to backup in specific cases.
Not sure what is causing the problem, may be backup software, may be VMWARE architecture or may be linux or SAP portal for the last.
Here is the error code we get when we tried to backup KM Folders on a 32-bit windows 2003 server with Netbackup.
6/4/2008 2:14:53 PM - granted resource MediaID=@aaaae;Path=Z:\bck;MediaServer=bkcompany
6/4/2008 2:14:53 PM - granted resource test_disk
6/4/2008 2:14:53 PM - estimated 16 kbytes needed
6/4/2008 2:14:54 PM - started process bpbrm (88520)
6/4/2008 2:14:54 PM - connecting
6/4/2008 2:14:54 PM - connected; connect time: 00:00:00
6/4/2008 2:14:58 PM - begin writing
6/4/2008 2:15:05 PM - Error bpbrm(pid=88520) socket read failed, An existing connection was forcibly closed by the remote host. (10054)
6/4/2008 2:15:10 PM - Error bpbrm(pid=88520) could not send server status message
6/4/2008 2:15:10 PM - end writing; write time: 00:00:12
file read failed(13)
also the event log entry:
Faulting application bpbkar32.exe, version 6.5.2007.1115, faulting module bpbkar32.exe, version 6.5.2007.1115, fault address 0x00067581.
May be this specific case is encountered by any of you
Does anyone have any solution or sample implementation like above.

Hi
Have you tried ICE Offline scenario?
[How to distribute KM Content using ICE Protocol|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/802c1739-d270-2910-ad9f-f369de07c1bf]
Check the Offline scenario, not Online.
Regards
Aparnna

HR Renewal Self Services Integration Issue with SAP Portal

Hi,
We are Implementing HR Renewal 2.0 FP1 and the Self-Services Landing Page to be launched from within SAP Portal.
I have imported the PFCG role ZSAP_EMPLOYEE_ESS_XX_UI5_1 into portal and assigned to the user. The End User read permission is provided.
We see the landing page with all lanes coming up fine when launched from portal. But subsequently when we click on the SAPUI5 delivered applications in the MY INFO Lane like Employee Profile, Salary Statement, Leave Application etc, they open from inside the portal in a new window via the below Standard Launchpad Start URL application
/irj/portal?NavigationTarget=ROLES%3A%2F%2Fportal_content%2Fcom.sap.pct%2Fevery_user%2Fcom.sap.pct.erp.common.bp_folder%2Fcom.sap.pct.erp.common.roles%2Fcom.sap.pct.erp.common.erp_common%2Fcom.sap.pct.erp.common.lpd_start_url&RequestMethod=GET&System=SAP_HCM_PROXY&URLTemplate=<System.wap.WAS.protocol>%3A%2F%2F<System.wap.WAS.hostname><System.wap.WAS.path>%2Fsap%2Fbc%2Fui5_ui5%2Fsap%2FHRESS_PAYSLIP_G%2Findex.html%3Fsap-client%3D<System.client>%26sap-language%3DEN&PrevNavTarget=navurl%3A%2F%2F9302a2e5cab6590e376f9e6a16fffb13&NavMode=3&CurrentWindowId=WID1411300030322
and getting the below error.
Page not found. Refresh the page or try again later. If the problem persists, contact your Portal administrator for assistance
Is any other configurations missing to launch the my info individual service application via portal as NavigationTarget.
Appreciate your response.
PS: No business packages (WD ABAP based etc.,) are installed in the portal side.
Thanks,
Urmi

Hi All,
The issue got fixed after installing the portal business package, Common Parts ERP 1.61.
Thanks,
Urmi

Fetching data in R/3 via portal application(JSPDYNPage)

Hello Everyone,
I want to fetch data in R/3 server via portal application(JSPDYNPAGE) & display that data as an output of the portal application in TABLEVIEW format. Can anyone guide me on this (I:e-How to connect to R/3 server via portal component & fetch data & display the same). any similar application developed for a reference will be of great help.
Thanks,
Chetan

Hi Chetan,
I hope you know how to create a JSP Dyn Page, anyway I will explain it briefly.
Open NWDS->File->New->Create a portal application project->Specify the project name
right click on the project->New->Create a new portal application object->Portal component->Select JSP dyn page-(By default it creates class and all)->this is available under description on the right column-
Now goto the Java page->see the functions->attach zip and jar files(HTMLB plugin)
->Right click on the project->goto properties->Java build path->Add external jars->Select com.sap.portal.htmlbbridge.zip and htmlb.jar
This is how JSP page is created.
Now we want to do establish connection with R/3. That I will discuss in the next session.
Award points if this was helpful......
All the best for you
Regards,
Arun Jacob.

Collaboration with vendor via Portal?

Hi everyone :
   I meet a problem about collaboration with vendor. Our customer has lots of vendor ,and our customer expect that their vendor could query related R/3 report real-time via Portal on Internet .
   I had done the SSO between Portal and R/3, and the user who had Portal user and R/3 both could access R/3 via Portal easily. We can create user for vendor in Portal easily, but it is impossible that we create user for all of vendors in R/3 , because of R/3 user need to pay for license. So vendors could not query R/3 report via Portal now .
    My problem :
    1. Vendors can't query R/3 report via Portal now.
Is there anyone met this problem ever , and How to solve this problem ?
    2.On the assumption that our vendor can query R/3 report via Portal now, how can we control the authorization that certain vendor could query his data only, can't query other vendor's data ?
    Any advice and discuss is welcome!
Best Regards,
Jianguo Chen
Message was edited by: jianguo chen
Message was edited by: jianguo chen

Hi Brian
which datasource u r using?
i think u used read only LDAP + Databse
when u chang the password for user in portal than after corresponding user password in LDAP directory are not changed thas't why it's generated a message that
password expires and u can't change the password
so try to change the password in LDAP also.
hope it's helps u.
regards,
kaushal

Calling a web dynpro application via portal using SSO

Hello Expert,
i have a requirement where i need to call a web dnpro application via portal.
But it is asking for user name and password.
i want to call using single sign on.
Can u please suggest a way.
i did the coding like this:-
CALL METHOD cl_wd_utilities=>construct_wd_url
EXPORTING
application_name = l_c_appl_name
IMPORTING
out_absolute_url = l_v_gv_url_string.
l_v_icf_url = l_c_icf_url_val. "#EC SYNTCHAR
CALL METHOD cl_icf_tree=>if_icf_tree~service_from_url
EXPORTING
url = l_v_icf_url
hostnumber = l_c_0
authority_check = space
IMPORTING
icfactive = l_v_m_sso_active.
IF l_v_m_sso_active = l_c_x .
CREATE OBJECT o_viewer
EXPORTING
parent = o_empty_co.
CALL METHOD o_viewer->enable_sapsso
EXPORTING
enabled = l_c_x
EXCEPTIONS
OTHERS = 0.
l_v_gv_url_c = l_v_gv_url_string .
CONCATENATE l_v_gv_url_c l_c_url_string p0022-pernr INTO l_v_gv_url_c.
CALL METHOD o_viewer->detach_url_in_browser
EXPORTING
url = l_v_gv_url_c
EXCEPTIONS
cntl_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4
RAISING error_occured.
ENDIF.
cl_gui_cfw=>flush( ).
ENDIF.
but it is not working
thanks
Mahesh

Hi Mahesh,
You need to setup a Single Sign On between SAP Portal and ECC system where yoy are doing the development.
Ask basis team to setup the single sign on and usually this is the job done by Basis teams. Refer the below link to get some idea on SSO setup:
http://scn.sap.com/community/enterprise-portal/blog/2013/12/15/sso-configuration-between-sap-portal-73-and-ecc-60-ehp-6
Thanks
Krishna

Sales Order Entry via Portal in R/3 4.7

Hi,
is there an iView (out of a Business Package) available for Sales Order Entry via Portal in R/3 4.7 ?
Or do we need to develop this from scratch?
Thanks & Regards,
Erik

Hi Erik,
The only one I found was in the Business package for Sales but it is listed for ERP2004 only. I found another one in the Business Package for Retail 50.2 that was 4.7 compatible but it is shown as out of maintenance and I was unable to download it. I didn't try very hard to get the download to work. You may want to take a look.
Good Luck,
John

Problem about showing report via Portal after modifying BWReports.css

Hi folks,
I use BEx 3.X.
I wanna make title of table column to be shown in the center of table cell.
So, I modify class SAPBEXstdItem in BWReports.css, and I changed text-align of SAPBEXstdItem into 'center'.
I run the report via Web Application Designer (SAP BW 3.x).
the title is located in the center of table cell.
However, I run the report via Portal, the title is still located on the left of table cell.
I don't know why.
Could you help me to solve the issue?
Thanks in advance.

I can't find wad link here.
Do you mean BEx Web Application Query String?
My BEx Web Application Query String is sap-language=<Request.Language>&bsplanguage=EN&cmd=ldoc&TEMPLATE_ID=ZXJP_C04_WT0110
Edited by: Xiaodong Ji on Nov 14, 2008 4:53 AM

IMS via Portal

Hi!
I am getting javascript error when trying login to Messaging via Portal.
Can anybody help me with it?
Thank You
Simon

Simon Fugler wrote:
Hi!
I am getting javascript error when trying login to Messaging via Portal.
Can anybody help me with it?
Thank You
SimonYou cant view iMS with the channel attached, you have to detach the
channel and make login in the iMS.
chears Ram

SAPGUI for Windows via Portal - problem with frame

We are launching SAPGUI for Windows via Portal to drive single sign-on via AD. Our problem is that when SAPGUI launches, it is contained within an IE browser frame that causes some of the SAPGUI screens to not fit on the screen well. Those same screens fit just fine if we launch SAPGUI directly.
Is there any way to launch SAPGUI from Portal, with SSO enabled, but without the IE frame around it?

Lonny,
The best way to authenticate users when they logon using SAP GUI for Windows, is to use SNC authentication in SAP GUi. Then, the browser iview will launch the GUI and the GUI will authenticate the user using their AD credentials issued during the Windows logon. You will need to setup an SNC library on both the ABAP system which the user is logged onto, and the workstation where SAP GUI is installed.
If you don't use SNC, and you just launch SAP GUI for Windows from browser, then an SSO2 ticket is used to authenticate the user to the ABAP stack, and this is not secure due to the fact that the SAP GUI session which is used to pass the SSO2 ticket is not protected - anybody can intercept the SAP GUI session, take the SSO2 ticket from this traffic and logon as that user - clearly this is bad security and needs SNC to make it secure.
Thanks,
Tim

Crawl ifs using ultrasearch with results via portal

I would like to be able to crawl ifs and have results via portal.
The only thing I can find concerning making ultrasearch crawl ifs is this, http://otn.oracle.com/products/ultrasearch/htdocs/FAQ.html, which has the statement "you can crawl Oracle Files with Ultra Search through HTTP - it is just another web data source - or database crawling. However, only public documents can be crawled through HTTP."
So, I set up a web datasource using the url to ifs login page.
Does not work. Does anyone know how to do this? Is there a document I am missing?
Thanks for any ideas.

You are correct. This is what I found out:
"Crawling of iFS is not supported in ultrasearch 9.0.2. It is a new feature of 9.0.4"
HOWEVER:
"ultrasearch 9.0.4 only runs with iAS 9.0.4 so you would have to upgrade both. According to my records these products have not been released yet and are due sometime later in the year."

HR Renewal 1.0 FP4 navigation fails via Portal

Similar Messages

Maybe you are looking for