HT1212 ipod locked and screen is blank

Ipod daughter forgot password and screen is blank and will not turn on.

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
  Apple Retail Store - Genius Bar

Similar Messages

  • HT1212 Ipod locked and can not unlock it.  Itunes not recognizing it either.  What now?

    Ipod locked and can not unlock it.  Itunes not recognizing it either.  What now?

    If you're unable to do the Restore, go into Recovery Mode per the instructions here.  Also, if you have IOS-7, read this.

  • HT1320 My Ipod nano says its locked and screens on and it's staying frozen.  I have tried pressing the menu and select button simultaneously and still not reset.  What should I do?.

    My Ipod nano says its locked and screens on and it's staying frozen.  I have tried pressing the menu and select button simultaneously and still not reset.  What should I do?

    Right click on the iPod Nano icon.  "Eject" should pop up.  At least that is the way it works on Macs. 
    Just found this: 
    iPod: How to Safely Disconnect if iPod doesn't eject

  • My ipod locked and i cant remeber the password how can i open it and change the password?

    my ipod locked and i forgot the password is there anyway i can open it without haveing to reboot the whole ipod to factory settings.

    Hey 1966Gt6,
    I found an article that goes over what to do if you've forgotten or can't remember your passcode. Check it out here:
    iOS: Forgotten passcode or device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    Regards,
    David

  • What do i do if my apple ipod locked and i forgot password

    what do i do if my apple ipod locked and i forgot password like i turned it on and i didnt have a code set for it and the it died and i charged it and turned it on and it has a passlock what do i do how do i  get in to my ipod help

    http://support.apple.com/kb/ht1212
    Basic troubleshooting steps  
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101

  • I dropped my ipod 5 and screen is black and i cant touch anything but siri still works

    i dropped my ipod 5 and screen is black and i cant touch anything but siri still works

    Try:
    - Reset the iOS device. Nothing will be lost       
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup. See:                                                
    iOS: How to back up                                                                                     
    - Restore to factory settings/new iOS device.             
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
      Apple Retail Store - Genius Bar

  • Received message iPhone needs to cool down and screen went blank. Any suggestions on how to get screen back? It's been several hours.

    IiPhone needs to cool down and screen went blank. It's been several hours and still no screen. Any suggestions?

    If you connect it to your computer, does iTunes see it? If you plug it in to charge, does it make any sound or vibrate?
    ~Lyssa

  • HT2371 What do you do if your iPod locks and the language is still something you can read?

    What do you do if your iPod locks and the language is still something you can't understand?

    Maybe:
    iOS: How to change the language when it's set to one you don't understand
    Next:
    Connect the iOS device to your computer and restore via iTunes. Place the iPod in Recovery Mode if necessary to allow the restore.
    If recovery mode does not work try DFU mode.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    For how to restore:
    iTunes: Backing up, updating, and restoring iOS software
    To restore from backup see:
    iOS: How to back up
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the iPod backup that iTunes makes.
    You can redownload iTuns purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • Iphone 5c ios8 home lock and screen 30%

    Hi can someone help me please my home lock and screen takes 30%+ of my battery even when im not using the phone.
    my phone dies every hour or so and i cant use when i dont have a charging station near by and its really annoying and sometimes my phone will die when i still have 15% battery left i already tried to change my battery and nothing changed.
    does someone knows how to fix that thanks

    Yes, as rbrylawski stated, the toilet/water has finally finished off your phone. While it may have survived for a while, corrosion has done its evil job and killed your device. If you have Apple Care Plus, then you can get an out of warranty replacement for just the deductible. If not, then an out of warranty replacement will be a little more.

  • Had my ipod locked and put it on charger, now it will not even turn on and does not even register connected to the puter?  Any ideas???

    Had my ipod locked and put it on charger, now it will not even turn on and does not even register connected to the puter?  Any ideas???

    You just need to reset the ipod by holding down the sleep button and home button  for ipod touch or the menu and centre button on others for about 10 seconds

  • Improperly disconnected ipod nano now screen is blank, and will not shut off.

    I accidently unplugged iPod Nano (second generation) improperly; now the screen is blank and will not shut down.

    Have you tried a hard reset yet? To do this, first make sure the hold switch has not been activated, then press and hold both the Select (Center) and Menu buttons together long enough for the Apple logo to appear.  This may take a couple of tries.
    Otherwise, wait for the iPod's battery to fully drain. Then connect it to a power source charge up as normal. It might be necessary to restore the Nano via iTunes after that as there may be corrupt files still leftover from improperly ejecting the iPod.
    B-rock

  • Intermittent disk locks and screen blanks

    I am new (4 months) to Mac. At first, I loved my MacBook Pro, but now it is driving me mad. The disk locks and the screen goes black for a few seconds, then recovers. There is no pattern to it. It happens when I am working actively, and when the machine is sitting alone on a desk playing music. It happens on battery power and mains power. There was a period of about three weeks when it didn't happen at all, but now it is back again. It will happen 5 or 6 times in an hour, and then not again for several hours. Does anyone have any ideas what is causing this?

    Peter, as Nick suggested, try repairing permissions. Usually this is what Mac owners do at first sight of an issue. I skipped over the part about you only being a Mac user for 4 months. After installing any new applications, and periodically when I run the Cocktail app, I repair permissions. Sometimes funny things can happen when apps are installed, and certain permissions can get changed. Often it's no biggie, but sometimes something can get changed that shouldn't.
    You can repair permissions from within your session, or if you really want to, as Nick suggested, boot from your install disk, and go to Disk Utility. You can repair permissions, and check the drive for any errors as well. This is a good method as the OS isn't actually running, so technically all permissions can be repaired without fear of running applications interfering.
    Bryan

  • When I open messages on mu iPod touch the screen is blank and then goes back to the home screen after 10secs

    When I open messages in my iPod touch the screen is black, I have no access to the keyboard and then after 10 secs, the screen bounces back to the home screen, why is this?

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Go to Settings.Messages>Send and Receive and sign out of the account and sign back in.
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up                                                                
    - Restore to factory settings/new iOS device.             

  • Help, IPAD Air 2 apps locked than screen went blank.

    Was unable to access any of the apps on my IPAD 2 after using for a few minutes this afternoon.  Tried turning it off to see if that would fix the problem but now the screen is blank. I've tried holding down the sleep/on button for a minute.  Screen came back for 2 seconds and than went blank.  Tried charging and hitting home and the sleep/on button with no success.  Any suggestions on how I might fix this?  Product is barely 2 months old and has been very gently used.

    Hello jeanfromusa,
    I'm sorry to hear you are having these issues with your iPad. If your iPad isn't responding or starting up, you may find the troubleshooting steps outlined in the following article helpful:
    If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on - Apple Support
    Sincerely,
    - Brenden

  • Unmountable Boot Volume on XP and screen goes blank before repair begins

    The XP Windows partition was seemingly working fine until I turned on the laptop this afternoon. Took a minute or so longer to boot than usual and I was prompted when it did load to update Acrobat, which I did and it rebooted. Took longer to boot, perhaps two or three minutes and I received an Unmountable Boot Volume error. I rebooted a few more times, same result. I tried system restore to three previous dates over past ten days and was told after attempted reloading that it had failed and I should try another day. Worried about my data, I went to safe mode to back up C: drive.
    The general advice from MS is to use the Windows installation CD to repair the boot sector. With the CD in, Windows will boot and show my normal desktop and files, though will on perhaps the third item to load to memory, the screen goes blank and the loading seems to continue, as I hear sounds though not sure if it is the programs or the repair.
    There does seem to be an ability for it to boot, just not maintain it through full load. Any suggestions short of reinstalling windows would be welcomed. Thank you.

    I was unistalling some usless programs when my laptop died & when I turned it on I had unmountable boot volume 0x000000ED (the blue screen)
    If I hit repair windows it goes to a black screen with the mouse (nothing else)
    Now I tried f8 & then did command prompt but after it had gone to the loading files screen it had gone back to the blue screens with unmountable boot volume 0x000000E
    I DL windows 7 repair but how do I get it to install when I cant get past the blue screen?
    so i decide to repair it my self and then i found this great solution what helps me

Maybe you are looking for

  • HP LaserJet M1132 MFP: unable to save scan to file

    Hi, I just purchased a new HP LaserJet M1132 MFP. Everything is working fine except when using HP Director. It detects the device and scans. But when I try to save the file on my computer it doesn't succeed. Nothing is saved in the folder. What seems

  • Scripting in Premiere CS6

    I think i know the answer but i've seen some searches that suggest it is possible and i can see PPro as a target in ExtendScript Can i script PPro CS6? Is there a scripting guide like there is for After Effects? If not, are there any known plans to a

  • Base table name for fields from Material Master

    Hi All, I want base table name which holds all possible values of following column: 1)Material Master : X-plant matl status from tab -basic data 1 2)Material Master: X-distr.chain status from tab -sales org 1 for example: Base table for Prod.hierarch

  • I need a fmodule to forward workitems

    hello, I need a function module to forward workitems. I know about SAP_wi_forward and SAP_WI_OBJECT_FORWARD but these function modules can only forward one workitem at a time,. Iam looking for a fmodule which transfers multiple workitems to a user in

  • 2014 Golden Globe Winners

    Awards season is officially upon us as the 71st Golden Globe Awards have now come and gone. This year’s Golden Globe Awards was hosted by Tina Fey and Amy Poehler again and aired Sunday, January 12, 2014. Let’s take a look at the winners from the 201