HT1349 I have a white screen on my i-pod touch?
I have a white screen on my i-pod touch and it is un responsive. What can i do?
Try posting in the ipod touch forum. This is the iphone forum.
Basics from the manual are restart, reset, restore.
Try those.
Similar Messages
-
I have a white sreen on my I-POD touch?
I have a white sreen on my i-pod touch, tried to rest ! does not respond!
Try a hard reset by holding the buttons down at least 15-30 seconds.
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro 8G RAM 750G HD + OCZ Vertex 3 SSD Boot HD
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
In Memory of Steve Jobs -
How do I back up and restore my ipod touch if when i connect it to itunes It does not appear in the devices column? I have a white screen and have tried holding down the wake/sleep and home buttons and that is not working. Please help
Take it in for repair/replace to your local Apple retailer.
-
I have a white screen with Apple emblem in the middle. The little spinner is spinning and there is a bar showing it loading. When it is done loading, the mini mac goes off. Please help me.
If your data is backed up, we can guide you through repairing the directory with my subscription FAQ*:
http://www.macmaps.com/directoryfaq.html
* Links to my pages may give me compensation. -
I inadvertantly dropped my iphone 3 and now have a white screen with green vertical lines to the right of the screen. It won't sync with itunes due to an error. What can I do?
Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.
If it does not resolve the issue, the device is permanently damaged and will require replacement. -
Hi Everyone, I have tried all the solutions mentioned by apple and still have a white screen with a blinking file folder with a question mark in the center, anyone have any ideas or experienced this?
Nooo or you would use OS X Recovery Mode: Disk Utilty and then Startup Disk.
Mac OS X & Mountain Lion Community
https://discussions.apple.com/community/mac_os
https://discussions.apple.com/community/mac_os/os_x_mountain_lion?view=discussio ns
Recovery Mode
http://support.apple.com/kb/HT4718
ExpressLane
https://expresslane.apple.com/
Mac OS X Help
http://www.apple.com/support/macbasics/
Isolating Issues in Mac OS
http://support.apple.com/kb/TS1388
https://www.apple.com/support/osx/
https://www.apple.com/support/quickassist/
http://www.apple.com/support/mac101/help/
http://www.apple.com/support/mac101/tour/
Get Help with your Product
http://docs.info.apple.com/article.html?artnum=304725 -
I have tried almost everything and I still have a white screen that pops up
Reset to factory settings if that doesn't work, take it in to the Apple store.
-
I have tried everything I know of. It worked fine an hour ago. I have a white screen, buttons will not turn it off and I get get to anything. Any ideas whats going on?
Thanks for any help.Sunny1963 wrote:
I have tried everything I know of.
That's fine - except nobody here knows what you have been able to think of try to this point.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
It really helps if you let others know "what you know of" and already tried. -
Hi i have a white screen problem with my macbookpro mid2009 15".I installed a ifixit battery and i think it screwed up one owc ssd drive.I just installed a new one and at 13min battery left it shut down and then all i got was a white screen...I tried every feasible command and all i got was some more white lol.I dont have my tools to open the case right now but do you guys think my cpu board is done?
Have a look at this help document for suggestions that you haven't tried yet:
http://support.apple.com/kb/TS2570 -
Restarted my MacBook Air, just have a white screen with apple . Will not start up
Restarted my MacBook Air, just have a white screen with apple . Will not start
What version MacBook Air do you have? Usually identified by the year you bought it, i.e. mid-year 2012, 2011, etc. Also, what OSX are you running? (please provide OSX ver number, i.e. 10.8.2 for latest Mountain Lion, etc.)
Not sure I can help you directly but for others to lend a hand, they'll need to know this information to make a sound suggestion. I see you're new to posting here so this will help you in the future.
Good luck. -
i have a white screen on my computers. I tried resetting it and it worked for a few minutes until it was put to sleep and then went back to white screen when i turned it back on. I tried resetting again and it did not work. I then did restore for itunes. it didn't work. was wondering if i did restore, as a new phone set up in itunes will i loose my contacts. just want to make sure before i try in the event i have to buy a new phone want to be able to have the information to transfer.
restoring as new does just that. It will wipe your phone clean just as if you just bought it.
If you've been using your iPhone as recommended, you've been synching your contacts to your computer to a contact manager such as Outlook or Address Book, or you've been synching your contacts with a cloud service like MobileMe or Google. Your contacts should be safe in one of those locations. -
A have a white screen how to make a new installation of my computer
A have a white screen how to make a new installation of my computer
More details would help...what have you done to get to a white screen? Were you in the process of reinstalling Mac OS X? Or something else?
In general, to reinstall Mac OS X, restart the Mac and hold the Command and R keys. From the Utilities drop down select Install Mac OS X and the system will download the installer. You w I'll then follow the instructions to install.
By the way, you posted in the iMac PPC forum, this belongs in Yosemite from what you show on your info line, I will ask for relocation. -
I have the white screen syndrome ...
I have the white screen syndrome on my 5 year old imac .. i think that it is a hard drive problem. what should i do/replace?
Try here:
iOS: Not responding or does not turn on
If unsuccessful and you can't turn it off, let he battery fully drain. After charging for at least an hour try again.
If still unsuccessful time for an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem -
trying to install Snow Leapord. System restarted 1/2 way through install. now i have a white screen with an apple on it. what do i do?
Boot from the installer disk and start again, you did backup before you started this, right?
-
I tried to start my computer and just have a white screen. Does anyone know what this might be?
Not good news. But you will need to be more descriptive. What version of OS X are you running? Did you do anything different prior to turning it off the time before this happened? Is their an Apple logo on the screen? Is there a spinning gear below the logo? What version of OS X was installed when the computer was new?
Maybe you are looking for
-
Installation CourseBuilder Extension in Dreamweaver CS 5 fails
Hello i become the error The Extesion .CourseBuilder for Adobe Dreamweaver CS5, contains not a valid signature, The extension is not installed! Can anyone help me!!! Thanks MRstooni - from Switzerland!
-
Paging area and infosets.
Hi all, I don't know if this is the correct place to post this question? but can anyone tell what is <b>Roll area, Extended memory, Assigned memory, Short area, Paging area</b>. Also is this the place to post questions on infosets 'SQ01' please let
-
Trackpoint scrolling in Windows 8
On Windows 7 I use the trackpoint middle click by setting the scrolling to auto-scrolling. The generic driver that I had for Synaptics allowed this too, but the Ultranav driver on the Lenovo support site gets rid of this. Will it be put back? W540: i
-
Hi, I have the following code built using idocScript <$dDocName=variableName$> <$executeService("DOC_INFO_BY_NAME")$> Note: variableName has value of contentID for which "DOC_INFO_BY_NAME" has be executed. When i execute this, i see that DOC_INFO_BY_
-
how can i converting formats into ASF?