HT1386 I hook up my ipod to itunes and I click on it but it doesn't come up with the bar on the top so what do I do to put music on it from my computer? pleas help!!
Pleas help i want to download music from my computer but when i hook up my ipod it doesn't come up with the bar were i can do thatb so what do i do to download music!?!?
If your device is not recognized in iTunes, try these suggestions:
iOS: Device not recognized in iTunes for Windows
Also try to connect in recovery mode, to set it up as new device and start again:
How to back up your data and set up as a new device
Similar Messages
-
i just bought my ipod and hooked it up to my laptop, and i clicked restore files, but my ipod wont turn on or off
Try here:
iOS: Not responding or does not turn on
Is the iPod on or off?
Did it work before you tried a restore? -
I tried to access my itunes account on my new iphone 5s i couldn`t remember my id and password and tried to set upa new account but this failed, but have since found all the id and password for my original account but my phone only comes up with the alternative email i tried to use and i can`t change this,can you help please?
Hi ruffdog64,
If you are having issues changing the signed in Apple ID on your iPhone, you may find the following article helpful:
iOS: Sign in with a different Apple ID in the iTunes Store, App Store, and iBooks Store
http://support.apple.com/kb/ht1311
Regards,
- Brenden -
My iPod shows that my battery is receiving energy and that it is "charging," but it doesn't actually charge. The battery never increases; it only decreases. Even when I have it physically plugged in and charging, it loses battery whenever I am using an APP or anything. I'm thinking that the chip that receives the energy is damaged or worn out. Is there anyway to fix it without going to the store? My USB chords is fine. It charges other iPods fine. Including a second generation iPod which means my 4th generation iPod should not have an physical battery problem. Any suggestions? Thank you so much!
- See:
iPod touch: Hardware troubleshooting
- Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use.
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
just updated the lion os x, and now when I try to use my optus dongle, it comes up with the message saying that it won't work because Java Runtime needs to be installed. Help?
Have you run Software Update. You have Java already installed, but it needs to be updated.
-
when im signing up in itunes and it says "This Apple ID has not yet been used with the iTunes Store."
You have to sign into your account and verify that you have a valid payment mendo specified in your account
Settings>iTunes and App Store>Apple ID>View Account -
Internet not working and printer connected by cable but it is unable to communicate with the compute
Changed print cartridge and then problem started.
Internet not working and printer connected by cable but it is unable to communicate with the computerHi Joanna 59
Sorry to hear that you are having this issue and Hope you are well;
1.Do you see any light on the back on the printer where the cable is connected?
2. Do you see lights on the back of the router where the cable that comes from the printer is connected?
3.What type of cable are using to connect the printer? Have you try another cable to see if the problem is the current cable.
Please kindly include;
What router are you using (Brand and model)
Operating system i.e. Win 7
Complete Printer model
Thanks;
RobertoR
You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance! -
On using my latop yesterday, i opened itunes and it gave me the option to update to the new software, which i was happy to do. I went through all the stages on installing the software and it opened up for use.
On using the software to download new music, i found it was freezing quite a lot and just in general wouldnt work. I closed the prgramme after having to use task manager as it wouln't respond. I then re-opened the programme and it came up with the message 'Do you wish to allow this prgramme to make changes to your computer?' i automatically said yes and expected itunes to open however, it didn't. I ran through troubleshoot compatibility however the issue found said 'Incompatibe application' to which i didnt know what it meant.
I've tried everything to make it work. Re-starting the computer, going on unistalling the programme and repairing it but, nothings worked.
I dont want to unistall the programme because i dont want to lose my music. I need a way to fix the programme without unistalling it.
Can anyone help??I have already copied my photographs to the a library manager but when I tried to reuse iphoto and import the photos back into iphoto, it would not let me.
You can't "copy" your photos to the "library manager", there is just no way to any such thing.
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD -
I have also reinstalled iTunes dozens (literally) of times. I simply cannot resolve this conflict. I've looked on many other websites, and there seems to be no solution!
update .netframework to latest version
then
Follow the instructions on this link, basically un-install everything, remove programs that says they are made by apple inc. (using add remove program)
http://www.reimageplus.com/fix-windows-127-error/ (Many thanks to reimageplus.com)
You will also need to check and verify that the following folders have been removed:
C:\Program Files\Bonjour
C:\Program Files\Common Files\Apple
C:\Program Files\iTunes
C:\Program Files\iPod
C:\Program Files\QuickTime
C:\Windows\System32\QuickTime
C:\Windows\System32\QuickTimeVR
dont forget to remove icloud also
you dont need to delete your itune music library though
If any of these folders still exist, delete them along with their contents. (if you cant delete them, right click and go to properties and then security and change the control of the fold to you)
do this for files under program files and program file (x86) on your computer
once you have deleted everything, restart your computer. Then I repaired my registry using a registry repair program.
Important:- instead of installing itunes I installed quick time, which installs apple application support (this is the corrupt file which is causing all the issues)
i then installed itunes and it all worked fine,
should take no longer than half hour to fix
hope this helps -
When connected to my new Ford Mondeo, my ipod nano can be controlled through user interface in car. This worksd most of the time, but after a while if I try to change the music or search, it comes up with message 'Loading Data'. I then have to pull out USB and reinseert, at which point it works again. Has anyone esle expereinced this/have a solution?
Does not matter if anyone else has this issue. You need to contact the Ford dealership. It's their product you are having problems with.
If you really want to know if anyone else has this issue, post on Ford's Mondeo message boards. It's where the Ford car owners hang out. -
I have an iPhone 4 and a 4th gen iPod linked to the same email address and apple ID. I am trying to change the email address on the iPod so a family member can use it but when I do it says it doesn't recognize the email address. Where am I going wrong ? I just want them to be able to iMessage and email without having to use my email address.
The procedure is Settings>Messages>Send & Receive at>You can be reached by iMessages at>Add another email address. The email address has to be a valid working email address, obviously. Apple should verify the email address and you have to go to the inbox of that email account, read the verification email from Apple and follow the inductions in the email in order to complete the verification. Then you go back to the settings, uncheck your email address and check the new email address to be used as the contact email address.
-
I download latest updates for itunes and my iphone, when it comes to installing, it successfully downloads, but then i get a message for iphone software error=1403 file corrupted, and for itunes it downloads, then when i try to install it a message says unable to install software, file maybe corrupted!!
The iTunes update must be downloaded and installed before you try and use it to update the iPhone OS
Download iTunes 10.2.2 from here: http://support.apple.com/kb/DL1103
When it completes it will auto mount the disc image and show you the package installer, don't try and do anything with the file until it gets to this stage.
Once that's installed reboot the Mac, run iTunes, connect your iPhone and let it sync, then hit the update button and let it complete that step by itself (which will require a restart of the iPhone) -
Downloaded iTunes update to my Mac mini (2007). Pressed restart but computer is hung up on a gray screen with a spinning wheel. Doesn't respond to power switch. Disconnected but returns to same screen when plugged back in.
FWIW, have a look at this user tip.
-
My wifi only connects for a few minutes then goes away, I've been trying to look for solutions on the Internet but none of them work, help! It's really frustrating.
Hello FrancisN,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
Wi-Fi: How to troubleshoot Wi-Fi connectivity
http://support.apple.com/kb/HT4628?viewlocale=en_US
and
Wi-Fi and Bluetooth: Potential sources of wireless interference
http://support.apple.com/kb/HT1365
Intermittent or complete loss of the wireless connection
Best of luck,
Mario -
My itunes account was set up under an email account that has been deleted. I started a new i tunes account but have the same device as with the old account. How do i keep my music thats on my ipod touch from being deleted whin i sync it to itunes after purchasing new music?
I have the same problem (deleted email account). I think I mistakenly set up an account when I was buying an Apple product online, not realizing that it would be the same ID as my iTunes.
What is the way to actually contact Apple?
I have been clicking around in circles for hours! Will I have to pay them to resolve this? I don't have any products still have applecare . . .
Maybe you are looking for
-
Material View Refresh Slow under 10.2.0.4?
I have several material views that refreshed in minutes under 9.2.0.6, but are now taking hours under 10.2.0.4. I'm thinking it's in my initialization parameters. I remember the upgrade process making at least one of the HASH parameters obsolete. Can
-
Hi folks, got a question about the firewire ports on the 17" MacBook Pro. Do they still power the external hard drives even after the system has shutdown and the power adapter unplugged? Last night I shut down my MacBook Pro, unplugged it from the ma
-
Why I can't install lion into my Mac,
it says the files cannot be recovered
-
Can't open Encore CS4 file created on iMac
Is there any way of opening an Encore CS4 project file (created on a Mac) in the Windows XP version of Encore CS4??? Is this also a problem with the CS5 version of Encore? Thanks for any help/answers!
-
Where can I download the driver for ZEN 8G
Have been looking on CREATIVE website, internet, tucows, etc.... Can't find the missing driver so that my Advent laptop (Windows XP S2, WMP ) recognises the player when connected. Anybody can help ? Tom