HT1391 I followed all of the steps above and I still can't find my music. What do Ido?

I have followed all of the steps and it seems like my music is missing. What do I do?

Solving the iTunes Installation Problems in Windows
1. Apple has posted their solution here: iTunes 11.1.4 for Windows- Unable to install or open - MSVCR80 issue.
2. If the Apple article does not fully resolve the problem for you, then try Troubleshooting issues with iTunes for Windows updates - MSVCR80.

Similar Messages

  • TS5376 I just attempted to update my apple iTunes to 11.1.4 which resulted in the msvcr80.dll error message. I followed all of the instructions above and now I can't get past the Service 'Apple Mobile Divice failed to start. Help!!!

    I just attempted to update my apple iTunes to 11.1.4 which resulted in the msvcr80.dll error message. I followed all of the instructions to move the .dll's to the desktop, I removed iTunes via the control panel, and now I can't get past the Service 'Apple Mobile Divice failed to start. Verify that you have sufficent privilidges to start systems services. I now have no iTunes on my laptop, can't reinstall iTunes, and I am pulling my hair out because I can not figure out how to send an e-mail to Apple because I bought my iPad just over a year ago. PLEASE HELP!!!
    V/r "TRACER"
    CDR Harold W. "TRACER" Valentine, SC, USN

    Solving the iTunes Installation Problems in Windows
    1. Apple has posted their solution here: iTunes 11.1.4 for Windows- Unable to install or open - MSVCR80 issue.
    2. If the Apple article does not fully resolve the problem for you, then try Troubleshooting issues with iTunes for Windows updates - MSVCR80.

  • HT1212 i have tried all of the steps above, and my ipod touch still will not reset.

    I have tried everything to reset my password but nothing is working. The lock screen continues to pop up instead of the USB screen.

    Try DFU mode and then restore
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    Or try using this program to place the iPod in recovery mode
    RecBoot: Easy Way to Put iPhone into Recovery Mode

  • HT5661 hi. I am trying to set my ipad back to factory settings. I have followed the steps above and nothing is happening

    I am trying to set my ipad back to factory settings. I have followed the steps above and nothing is happening

    FORCE IPAD INTO RECOVERY MODE
    1. Turn off iPad
    2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port.
    DO NOT RELEASE BUTTON until you see picture of iTunes and plug
    5. Release Home button.
    ON COMPUTER
    6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
    7. Select "Restore iPad"...
    Note:
    1. Data will be lost if you do not have backup
    2. If you did not do step 4 properly, start all over again.

  • HT4527 I'm transferring my iTunes library from a PC to my new iMac via home sharing.  I've followed all of the steps to "import" my library but the "import" button is greyed out.  Any suggestions?

    I'm transferring my iTunes library from a PC to my new iMac via home sharing.  I've followed all of the steps to "import" my library but the "import" button is greyed out.  Any suggestions?

    There is no need to import anything or use Home Sharing.
    Copy the ENTIRE iTunes folder from the old computer to the new computer, everything will be exactly as it was.

  • I've lost my Ipod, I can't locate with the cloud. I've followed all of the Steps to locate it with no luck. Can Apple detect if the unit has been reset and reused?

    I've followed all of the steps in the iCloud to find it but no luck. Can apple detect if it has been teset and reloaded?

    Not what I wanted to hear but thanks for the response

  • TS4062 I'm trying to sync my ipad over wifi, with my MAC, I have the updated software on my MAC, the ipad is up to dat 6.1.2.  I can follow all of the steps, but I can't find a SUMMARY button on the toolbar, nor do I receive the option to sync.  Whats wro

    I'm trying to sync my ipad over wifi, with my MAC, I have the updated software on my MAC, the ipad is up to dat 6.1.2.  I can follow all of the steps, but I can't find a SUMMARY button on the toolbar, nor do I receive the option to sync.  What am I doing wrong or what should I look for?  Thank You

    To sync your iPad over Wifi:
    First ensure you're running iTunes 11.0.2. And you already have your iPad up to date, good.
    Plug your iPad into the Mac via USB. Click your iPad in the top toolbar (under the search bar). Click the Summary tab if it isn't already selected. Check the box to "Sync with this iPad over Wi-Fi" (you may have to scroll down to see it). And now click the Apply button at the bottom right.
    You should be able to unplug your iPad from the Mac and it should still remain in iTunes. (If not, try Quitting and relaunching iTunes and waiting, restarting iPad, etc).
    To initiate a sync over Wifi, click your iPad in the toolbar in iTunes then click Sync. Or on your iPad, go to Settings > General > iTunes Wifi Sync and tap "Sync Now."
    If this didn't solve your problem, please let me know with a more detailed explanation of what you're experiencing so I can try to help you get up and syncing wirelessly!

  • TS1702 Hi. I tried all the steps above but I still cannot open any of my apps. They close instantaneously. Any one have any insight? Thanks!

    Hi. I tried all the steps above but I still cannot open any of my apps. They close instantaneously. Any one have any insight? Thanks!
    This happened after I got my carrier to unlock my phone.

    Hi, I tried all the steps listed in these forums and they didn't work (I deleted the apps and added them back, I dled a new app, I signed in and out of my acct, I synced my phone, I did a reset holding down the power and home button, etc.). Finally I just restored the phone and added back the apps I wanted. That took care of it. Thanks.

  • How do i fix my ipad where itunez will recognize it.. I have already followed all of the steps and it is still not working

    I have already followed the step by step instructions and i still can not get my ipad to show up in itunes

    Please describe just what instructions you followed.  Otherwise, you will likely receive suggestions to do what you've already done.
    In the meantime, try a System Reset.  It's easy, quick and harmless and it cures many ills:
    Hold down the on/off switch and the Home button simultaneously until you see the Apple logo.  Ignore the "Slide to power off" text if it appears.
    A System Reset does not remove any apps, music, movies, etc. nor does it cause any settings to revert back to default.
    Also, you might wish to download the iPad-2 User Guide.  Pay special attention to page 162.  Note that this Guide also applies to the iPad-1 with IOS 4.3 except for those functions that are not supported by the hardware.
    http://support.apple.com/manuals/#ipad
    Finally,  the User Guide can be downloaded at no charge via iBooks and a less   comprehensive version of the Guide is included as a Safari bookmark.

  • Inbuilt isight camera is detected in system profiler but no image is being detected only a black screen shows up. I have tried all of the troubleshooting instructions and it still wont work. The iMac im using is OS X 10.6 and was an ex-floor model

    inbuilt isight camera is detected in system profiler but no image is being detected only a black screen shows up. I have tried all of the troubleshooting instructions and it still wont work. The iMac im using is OS X 10.6 and was an ex-floor model

    Hi,
    I would try a Safe Boot first.  (This will take longer than a normal Boot and you will need to Restart afterwards).
    If it were an older OS I would also suggest going to System Preferences > Displays and making sure the display is set to Millions.  (My MacBook Pro does not have this option in Snow Leopard so I did presume Snow Leopard does not have it).
    With some laptops there have been some issues with the cable up the back of the screen pulling loose with regular and frequent use of the lid, but this will not apply to you based on your specs.  (it does take time to appear and is also somewhat rare). However it seems enough contact with the camera can make it appear in System Profiler and power it on but not give a pic.
    If a Safe Boot does not work I would also try a PRAM reset.
    Shut down the computer.
    Restart it holding down Apple/CMD (or ⌘)+ALT( ⌥)+P+R Keys until you have heard three Start Up Bongs.
    This is actually "less" destructive in that it clears less memory items than Safe Boot but they are different enough to warrant trying.
    Do you have an older version of iGlasses installed ?
    The one for Leopard does not work for Snow Leopard.
    Do you have  Web Browser open ?
    This may point to  Google Video Chat Plug-in and Flash Conflict.  It would be rare to allow another app to access the camera even if not displayiong a Pic. 
    (Chrome Installs the Plug-in as does the standalone download).
    Knowing  what "any application" exactly you are trying might help us pin it down.
    Any additional downloaded  apps that can use the camera ?
    Do you happen to have something balck in front of the camera ?
    8:20 PM      Sunday; October 9, 2011
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb( 10.6.8)
     Mac OS X (10.6.8),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • HT203242 I've tried all of the suggested solutions, but I still can't get my cd drive recognised.  If I delete the driver and rebot, the cd drive appears, but as soon as the driver automatically installs, the driver disappears into the Q: drive

    I've tried all of the suggested solutions, but I still can't get my cd drive recognised on my laptop.  If I delete the driver and reboot, the cd drive appears, but as soon as the driver automatically installs, the driver disappears into the Q: drive, which is not accessible and neither is the CD drive

    I had the same or similar problem after installin iTunes 11 on my Acer Laptop with Vista. The new iTunes ran but I
    completely lost access to my CdRom/DVD drive. Error Code 19 was displayed in Windows Device Manager. Found out
    this is more widespread of a problem than expected.  After trying several forum recommended fixes, the Only thing that gave me back my CdRom drive was doing a Windows Restore to a date prior to iTunes 11 install.  I got my drive back but it also restored me to the prior 10.0.7.21 vers of iTunes which no longer worked due to missing files. iTunes help
    recommended a Reinstall.  I am reluctant to do that for several reason.  That's where I am at for now until I find out if there are any other risks for using iTunes 11 vs. Registry Errors vs. Losing access to my CdRom drive.  Brad

  • I download the latest update and now I can't find all my photos; where would they go?

    I download the latest update and now I can't find all my photos; where would they go?

    Photos taken by the iPhone, like any digital camera, should have been uploaded to your computer for safe keeping.  Certainly before a major operation like a software update that wipes your phone in the process of updating.  If they weren't, and they are not currently on your phone, then they're gone.  You can try restoring from a recent backup, but any photos taken between the last backup and the present time will be gone.

  • Have a classic 5th gen. have restored, relaoded itunes, gone through the troubleshooting tips and I still can't sync my latest 3 albums to my ipod. It will sync all but those. Also, when go through ipod trblshoot and select check, says can't see it sync.

    Have a classic 5th gen. have restored, relaoded itunes, gone through the troubleshooting tips and I still can't sync my latest 3 albums to my ipod. It will sync all but those. Also, when go through ipod trblshoot and select check for sync, says can't see my ipod. pls help

    Thanks for the reply. The Itunes trouble shooting in Itunes help. I don't get an error message, it just states can't see ipod like if it wasn't plugged in. I do get an error message on a few of the songs when sync that say error 50, and state that they can't be loaded to ipod. The weird thing is that I can load all of my libary except the latest 3 albums. They are in my libary but they won't load. I'm not sure but it seems like it started when the cloud came about from amazon which is where I buy most of my music.

  • I synced my ipod to my laptop and now I can't find my music on my ipod it's all gone and some of the songs I purchased thru itunes

    I synced my ipod to my laptop and now I can't find my music help.  I called the support but was told that that help expired.  I did not even know I had that offered to me HELP!!!!

    You may be able to redownload your iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    BTW, did you sync to the laptop before? Yu can only sync to one iTunes library. If you sync to to another library the iPod will be eerased and it contents replace with what is in the iTunes library on the computer.

  • I had 900  songs on my computer which i saved to the icloud. My computer was given to my kids and now I can't find my music. Please help

    I had 900  songs on my computer which i saved to the icloud. My computer was given to my kids and now I can't find my music. Please help

    How did you save your music to iCloud?  Did you subscribe to iTunes Match?

Maybe you are looking for

  • Suppliers Aging Report layouts - Date in US format

    Hi all I am running the above layout.  The Date field for the document date is a system variable but it displays as US format.  How do I get it to display UK?  Thanks! Lorna

  • Create a report with Top Meeting Organizers

    Hello! Is there a way to collect data to a report (perhaps to a csv) containing my organizations top meeting organizers in the last 6 months?  //Christian  Christian Andersson, Exchange 2010 Administrator Jönköping Municipality, Sweden

  • ASM on Solaris 10 without Veritas ?

    Looks like most ASM documentation assumes Linux or Solaris Veritas ? Is it possible to use inherent Solaris functionality and RAW as ASM devices, if not what aer the storage options

  • IOS 8.0.2 can't play video on TV any longer?

    I used to play videos from my IPad on TV through a Cambridge ID100 dock but since IOS 8 update it does not work any longer although it still works using my IPhone 4 ... Any idea?

  • Workflow Error: Agent determination

    I am on release 6.4 I am building a workflow where the buyer is the agent. When I test the rule it picks up the agent but when I execute the workflow i get the following error: 'Result of agent resolution does not agree with agents of task'. I set my