HT1595 Apple tv will connect to the network but cannot connect to the Internet

My apple tv is connecting to my network but it says it cannot connect to the Internet. I've already tried restarting everything and I've also connected it to my portable mifi network with same results. Anybody have any ideas?

This is what the MAC address clone looks like:
Should I enable it?  If so, should I put something in the MAC Address?  What?  I was able to connect it thru my MiFi, but not my home network.  Until today, it's been connected to my home network for about 8 months with no problem.  Haven't used it for a while...not since I got a new router.

Similar Messages

  • Apple TV connects to the network but cannot connect to the internet.

    Apple TV connects to the network but cannot connect to the internet. Works on other Apple TV's we have just not this new one. Defective???  Thank you!

    This might help:
    Apple TV (2nd gen.) saw my wireless network but did not accept my password (gave a network error message). It fixed instantly doing this:
    Made a note of the Apple TV's MAC address. Get it by pressing Menu on the remote, then Settings > General > About. It's called "WiFi address."
    Use your browser on a network connected computer to go to your router settings (usually 192.168.1.1).
    Under "Wireless > Wireless MAC Filter" (or something similar) do these steps:
    Enable Wireless MAC filter
    Enable "Permit PCs listed below to access the wireless network"
    Enter the Apple TV's MAC address
    Click "Save Setting"
    When I did this the network connection immediately started working.
    Note: These instructions are based on a Cisco Wireless-N Broadband, model WRT160Nv2, firmware v2.0.02.

  • NB200 Can connect to wireless networks, but cannot connect to the internet

    I have been able to connect my Win XP netbook to my secure wireless network at home, other people's networks and public networks like the library and McDonalds. This week I'm away from home and discovered that while I can still connect to a number of different wireless networks, I cannot connect to the internet using Internet Explorer.
    I've had this problem once before and fixed it by reinstalling Windows XP and all my other software. I have no idea why it has happened again. I'm hoping for a less drastic solution to the problem..?

    Hi Nakia,
    > I cannot connect to the internet using Internet Explorer.
    Have you tested other browsers like Mozilla Firefox and does this work?
    As MasterG wrote try to renew the IP address using the commend line.
    Last week I had a similar problem and I could solve it by updating the WLAN driver. Just remove the driver, restart the notebook and install the newest one. :)

  • Your Apple TV is connected to your wi fi network but cannot connect to the internet.  Airplay logo not available on ipad3, iPod touch3g and showing intermittently in iTunes on windows laptop.  Switched ISP a few days ago.  Entered pass key info on all.

    I switched ISP a few days ago and had problems with airplay since.  After restarting and reinstalling and updating, re entering pass keys for new wi fi on everything,  Apple TV shows:  Your Apple TV is connected to your wi fi network but cannot connect to the Internet.  Ipad3 and iPod touch 3G have no airplay icon or get one briefly then it disappears again.  Same with itunes on windows laptop.
    Can anyone help?
    Bob

    Welcome to the Apple Community.
    Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
    You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
    Refer to your router manual for instructions on changing your wifi channel or adjusting your multicast rate.
    There are other types of problems that can affect networks, but this is by far the most common, hence worth mentioning first. Networks that have inherent issues can be seen to work differently with different versions of the same software. You might also try moving the Apple TV away from other electrical equipment.

  • IPhone can join WRT54GS network, but cannot connect to internet

    I've got a WRT54GS v.1.1 router w/latest firmware (4.41.4).  My wired and wireless computers (windows XP) can connect just fine and see the internet.  My iPhone 3GS can join the network, but cannot see the internet.  The phone can join the network, gets a DHCP address/gateway/DNS info just fine.  Other machines on the local network can see the phone and vice-versa.  However, any time the iPhone tries to reach out to the internet, a message pops up saying "Safari cannot open the page because it is not connected to the internet".
    Again, other machines on my network can connect without issue.  My iPhone has no trouble connecting to other WiFi networks.
    I've tried all different wireless encryption schemes, including no password/encryption, with the same results each time.  I've also tried using a static IP address on my phone.  No luck.  MAC filtering is disabled, as is any other access restrictions.
    Finally, I've reset the phone's network settings, reset the router to its factory defaults, and tried everything else I can think of. 
    I've only seen one similar message one these boards with this problem, but it was never responded to.  Anyone seen this before of have other suggestions?
    Thanks in advance for any help.
    David 

    Thanks for your response!
    IP:  192.168.1.100  (DHCP-assigned)
    Subnet: 255.255.255.0
    Gateway: 192.168.1.1
    DNS: 66.218.44.5, 66.218.44.90 (the DNS's of my ISP)
    Router's (local) IP address is  192.168.1.1
    Router's internet-facing address is the one assigned by my ISP via their DHCP
    All looks right to me.
    -David

  • Iphone recognizes my at home network but cannot connect. Message states " unable to connect to network" Any suggestions?

    iphone recognizes home network but cannot connect. Message states " unable to join network". Any suggestions?

    IOS troubleshooting wif - networks and connections http://support.apple.com/kb/TS1398
    try - settings - general - reset - reset network settings.

  • Can see and recognize my wireless network and Internet is working, but I can't connect with ANY computers/iPad/iPod/air TV, etc. I have reset the time machine several times, and can see the network, but cannot access it with any device. PLEASE HELP!

    I have Comcast Internet and have it connected to a Motorla Surfboard modem and have that running directly to a 2TB Time Capsule. The TC is serving as our time machine as well as our wireless router. We lost power in a storm a week ago and can no longer connect to my wireless network I can see the network and sign into it via password, but cannot connect with any device(iMac, MacBook, iPhones, iPod touches, air tv, etc.). ALL of these devices worked gat before the power went out. I reset both modem and TC and still can't connect. I can connect to the Internet through Ethernet cord directly from the modems dn have confirmation(per Comcast service) that the Internet is working and we have a good connection.
    The TC is less than six months old so I'm not sure what is wrong. I have reset settings with TC to no avail. I have reset the TC SEVERAL times and have no idea what could be wrong and what is prohibiting me from connecting. Anyone that has ANY suggestions or ideas as to how to fix this, PLEASE HELP!!!  I'm going crazy using iPad 3G and not being able to connect to our wifi. THANKS FOR YOUR TIME AND I LOOK FORWARD TO GETTING BACK TO THE 21ST CENTURY! 

    Anyone have any ideas or information to help with this?  Any help and consideration is MUCH appreciated.

  • Is there a way to stay connected to a network but use wireless for my internet?

    Hello all.
    Quick question.
    I am looking at using my phone's mobile hotspot for my iMac to connect to via wifi since it's on 4G, and this internet at this house is dire. Really, really slow. I've got a wireless router plugged into the cable modem, which has a Western Digital World Edition network hard drive connected to it.
    Since this is the first time I had good speeds (via the phone hotspot) I started downloading OS X Lion. I then went downstairs and realised I'd like to listen to the music on my harddrive, so I plugged the ethernet cable in. As soon as I do that, despite airport being above ethernet on the network config pref pane, it automatically connects to the ethernet internet instead, and drops to really slow again.
    As I see it, I can either benefit from the fast internet and have no access to the network, or be able to use the network but get poor internet speeds.
    Without sounding stupid: can I use the wifi to get the fast internet, whilst being connected via ethernet to the network?
    (i'd unplug the modem, but when I'm out of the house my girlfriend will need to be able to connect to the internet via the network...)
    SECONDLY, is there a way to be connected to the ethernet network and toggle on/off internet access from it at the same time? E.g.... I would be connected to access our hard drive, etc., all the time, but if i didn't have access to my phone I could click something and enable internet access through the ethernet network, and turn it off when i had my phone to hand?
    Let me know!

    can I use the wifi to get the fast internet, whilst being connected via ethernet to the network?
    Sorry, but no.
    SECONDLY, is there a way to be connected to the ethernet network and toggle on/off internet access from it at the same time?
    Yes. You should have a means to disable the modem. Doing so would disconnect you from the Internet but still leave your local network functional in order to access the WD HDD.

  • Recognize Network, but Cannot Connect

    We recently changed the network name at my house. My ibook g4 still recognizes the network, but when I click on it to connect, it will not connect. It gives me a message box saying I can try again, but that does not seem to work. Any suggestions? Thanks.

    Are you using the right encryption for the network?
    Try repairing permissions and it'd be a good idea to update your OS to 10.4.11.
    (You can ethernet in to do that.)
    Also reboot everything, router, modem and computers and see if that works.

  • When I call a iPhone or iPad user on my iMac using FaceTime, the person being call can hear the ring but cannot connect.  Does anyone have any trouble shooting advise???

    Need help in determing why a person receiving a FaceTime call from me cannot connect?  The person receiving a call from me says that they hear my call coming in but when they try to connect nothing happens.  If anyone has any trouble shooting advise or why the call receiver cannot connect let me know ASAP.  I also have a MacBook Pro with the same FaceTime problem.  Help! Help!

    Its too bad that your phone is out of warranty because this is most likely a manufacturer fault. You need to take it back to Apple. If it is not a manufacturing fault, then go to any shop that your network owns and talk to them about this problem.

  • Connected to home network, but cannot access internet on ipad

    I have got strong signal on home network but cannot access the internet. Tried resets, etc

    It could be a simple problem that needs a reset for the related devices. Other than that, try to control the security settings and passwords of your home network. You might be using WEP password protocol to connect your home network. Try to use WPA protocol instead of WEP. Maybe it will help to solve your problem.

  • Spotify Connect & Yamaha Reciever problems - See the device but cannot connect.

    I have a Yamaha RX-V577 reciever with Spotify Connect and update to the last firmware.
    When I try to connect spotify using the Android APP, I see the device but cannot conect to it.
    What are the steps you took to get to the error/issue?
    1. I star a song
    2. Click on the speaker sign with a circle, and click on the receptor (Yahama device).
    3. The grey rounder speaker sign goes from grey to green and the sound waves moves (like tryng to connect).
    4. After a while it goes back to grey.
    IMPORTANT I dont know how sometimes it works, dunno how but after trying alot yesterday It worked. But cannot reproduce it.
     

    I have the EXACT same issue BUT on a Sony STR 1050! It worked fine up until lately. Sometimes I get it to work, but mostly not. When it works, it's very unreliable and often not in synch. 
    It still works absolutely fine with my Computer/Spotify App. I can even tell my PC to use my AVR as sound output and the connect to my PC to listen via my AVR. But connecting directly to my AVR is a PITA. Since more users have the same problem across different AVRs, it seems to be a new Spotify problem and not an issue with my AVR.
    When can we expect that this issue is fixed!? I'm using this feature constantly.

  • My iPad is connected to my network but cannot open any page in safari or access the internet

    My iPad is connected to my network and have full signal but cannot open any page in safari or connect to the internet or able to log in to iCloud. I forgot all my connections, reset my router updated to 8.1.1 and nothing

    Hopefully, this will be of some help.
    iOS: Troubleshooting Wi-Fi networks and connections - Apple Support

  • My IPod will find the network but doesn't accept the password even though it is right.

    I have tried many methods like airplane mode, restart device, restart network setting, restart router and turn on and off. I am getting tiered of it now because my mums I phone and my iPad will all connect but my IPod just refuses to join.
    Any ideas?
    Please help!!!

    Does the iPod connect to other networks?
    Does the iPod see the network?
    Any error messages?
    Do other devices now connect?
    Did the iPod connect before?
    Try the following to rule out a software problem:                 
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • [WRT54GL] laptop sees the network but cant connect

    Hey everyone,
    I am having trouble connecting to my wireless network with my laptop/wii
    When i scan for available networks, it finds my network perfectly and has a verygood signal.
    But when i try to connect to it it says that the network is timed-out or it is canceld manually.
    I just find it strange that i get this error since the day before it worked fine.
    I tried to search the forum but i couldnt find any post about it, so im hoping im not double posting.
     Does anyone know a solution to the problem?
    Well thanks for atleast reading it,
    sordid
    Message Edited by Sordid on 09-07-2009 03:58 AM

    Readjust the wireless settings on your router and try to connect your network again.....
    Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1 and press Enter...Leave Username blank & in Password use admin in lower case...
    Click on the Wireless tab
    - Wireless Network mode should be mixed...
    - Provide a unique name in the Wireless Network Name (SSID) box in order to differentiate your network from your neighbours network...
    - Set the Wireless channel to 11-2.462GHz...Wireless SSID broadcast should be Enabled and then click on Save Settings...
    Please make a note of Wireless Network Name (SSID) as this is the Network Identifier...
    For Wireless Security : -
    Click on the Sub tab under Wireless > Wireless Security...
    Change the Wireless security mode to WPA, For Encryption, select TKIP...For Passphrase input your desired WPA Key. For example , MySecretKey , This will serve as your network key whenever you connect to your wireless network. Do NOT give this key to anyone and remember the key.
    NOTE : Passphrase should be more that 8 characters...
    Click on Advanced Wireless Settings
    Change the Beacon Interval to 75 >>Change the Fragmentation Threshold to 2304, Change the RTS Threshold to 2304 >>Click on "Save Settings"...
    Now see if you can locate your Wireless Network and attempt to connect...

Maybe you are looking for