HT201401 My iPhone is not turning on since I last saw it it was charged and now it's not working not even with a charger. Please help me how I can reopen it
Please help me how to re open my iPhone as it was charged and stop working after few hours
Try a reset.
Hold the lock/power button and the home button at the same time until you see the Apple logo on the screen.
No data will be lost.
Let us know if that has any effect.
Similar Messages
-
I can't open any program anymore on my ipod since the last 30 minutes, please help
Did you try to reset the device by holding the sleep and home button until the Apple logo come back again?
If this does not work, set it up again "as new device", shown in this article: How to set up your iPhone or iPod touch as a new device -
i bought an iphone 5 for my girlfriend but it was blacklisted and now i dont no what to do with the phone?
i need helpYou can turn it into the police. You can sell it as a parts phone if you are going to be ethical be sure to list it as a blacklisted phone.
Have you enquired as to whether the blacklist is for non-payment or the device is stolen? -
i tried to update my jailbroken iphone 3gs to iOS 6 and i tried to activate it using redsn0w it uploaded but the phone didn't activate, then i tried to restore it in iTunes and it also wasn't working it shows 3194 error. Please help!
brigikeh wrote:
i tried to update my jailbroken iphone 3gs
Buzz! Thank you for playing!
Any warranty you had is void and your ability to get help here or from Apple is forfeit.
Try Google. We can not assist you per the terms of service.
It's very likely that your phone is now a brick. -
I bought a iPhone and I was able to log into my iCloud with no problem and when I tried to update it it kicked me out and now it's asking me for the old apple user please help what can I do...?
Contact the original owner, and ask them to remove the device from their icloud.
http://support.apple.com/kb/PH13695
HTH -
The new appearance of the Notes App is really disappointing. I used it for lists and now it just makes my notes appear to be random paragraphs without visual separation. Am I missing anyway to customize the App?
No, you can't customize it. Try different apps available in the App Store.
-
upgraded to iphone 5c at the end of Dec. I accidentally washed my phone and now it doesn't work. Is there a way to get a new or refurbished iphone 5c without signing a new contract?
Thank you. I've been looking online for refurbished iphones but that is cheaper than buying a refurbished phone.
-
I have an iPhone 4 . Just last night it was asking me to update my system. So I did now my phone won't turn on or do anything all it does is show a picture of the charger and a iTunes . Please help
Hi Alljays2002,
Thanks for visiting Apple Support Communities.
If you only see the "connect to iTunes" screen on your iPhone, first try to reset it:
Turn your iOS device off and on (restart) and reset
http://support.apple.com/kb/ht1430
To reset, press and hold both the Sleep/Wake and Home buttons for at least 10 seconds, until you see the Apple logo.
If you are not able to reset the iPhone or it returns to the "connect to iTunes" screen, you may need to restore your iPhone using the steps found here:
If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
Best Regards,
Jeremy -
My ipod touch has a black screen and will not turn on. i have charged my ipod and tryed troubleshooting but nothing seems to work. what can i do to have my ipod turn on again?
See Here...
Frozen or unresponsive iPod touch
Try this First... You will not lose any Data...
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...
http://support.apple.com/kb/ht1430 -
Since updating my Imac 27" 8 month old computer it will not let me open up any programs including safiri and iphoto. it is pretty much saying that i need to install all the program again, which i can not afford nor have the time too. can someone please help me be able to get it back to the way it was or help me to fix it so i can keep using it with this software update
For starters, you could boot from the OS X install DVD that came with your iMac (insert the disk, reboot and hold down the "C" key after the bong). On that disk is Disk Utility; run that, choose the iMac's hard disk, and run Repair Disk. If errors are found and repaired, try running it again until it's deemed OK.
If that doesn't help, try to get the OS 10.6.8 combo updater from Apple and run that. It will replace a lot of the Apple software that's already on your iMac and may refresh things so that they'll work. -
My ipod recenly froze with the last update. bestbuy gave me a replacement. the new one will not connect to the computer or itunes. i followed all the instructions and - nothing. It's frustrating enough as i lost all my notes and work, but now I can't connect to sync with itunes. i don't get it. i'm not a supertech so i don't know what to do. help!!!!!!
Thanks, Bob! You are correct. And, we learned this as we spoke with APPLE TECH SUPPORT by phone on Christmas day (800-APL-CARE). One of their reps spent the time to help us troubleshoot this, but the boiled down conclusion is your answer, and to repeat for the benefit of others, here is what worked:
1. With our Belkin router set to "out-of-the-box" WEP 64 bit security, we could not get wireless access of any kind. Only with the Security Mode set to DISABLED, could we gain access.
2. Changing the router's security mode setting to "WPA/WPA-2...." and entering a new min. 8 char passphrase, and then entering that same passphrase into the IPOD Touch, and restarting the router, did the trick!
Based on this, and some info found in another posting, I can only conclude that the IPODs and IPHONES do not support WEP security mode in many generic routers used by thousands of consumers. Hopefully, those same consumers can figure out how to change their wireless router setttings to WPA/WPA-2 security mode and ALSO get all their other wireless devices (PCs, laptops, WII boxes, ROKU boxes) all reconfigured to WPA mode, too.
I THINK THE BOTTOM LINE HERE IS THAT THERE IS AN ISSUE THAT APPLE NEEDS TO ADDRESS WITH WEP COMPATIBILITY and it may also be the case that MOST CONSUMERS ARE USING WEP 64 BIT security on their home wireless routers?
In any case, it's working now, so anyone who is having problems should try changing to WPA mode and post back here if it worked for them! -
In my iPhone 4s iOs7 is installed by mistake and I get all features from the Apps dull and gloomy so please help me to remove this iOs7 and install original software so that get all bright and better features from all the Apps. Thanks
You can't downgrad the OS on your iPhone. It's not suported by Apple.
One way to help make the icons stand out a bit more is to use a solid, dark background image.
OT -
I installed itunes 10.5 in my PC to sync with my ipod touch $G but it's giving me error message that itunes could not connect to itunes store..."make sure network is active and try again." I'm connected to internet though so I don't understand please help!
Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US -
I Don't have an optin of face time in my IPHONE 4, Please help me how i can install in in my Phone
Dear All,
Please help me to bring Facetime option in my IPhone 4, i don't have option of Facetime in my i phone 4, can you please tell me how to install in my IPHONE 4. I will be very thankful to you for help me on this regard. my contact details are given below,
Thanks
Assad
<Email Edited by Host>Hi
There is no FaceTime app, if that's what you're looking for.
Check if FaceTime is enabled. Go Settings -> Phone -> FaceTime. Is it On or Off?
You will need to find a contact in your iPhone, tap on it, and you should see 4 boxes in the bottom of the window: Text Message, FaceTime, Share Contact & Add to Favorites. Choose FaceTime, and it should call them via FaceTime. Also, you must be connected to a Wi Fi network in order to use FaceTime -
I shut of my Ipad and now i have a black screen with the "busy wheel" spinning on a black screen for 4 hours! Can't shut it off, can't turn it on!!! Is there a reset button somewhere?
HI,
Reset iPad.
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appear
See Here:
If iPad won't turn on, or the display stops responding
From Here:
http://www.apple.com/support/ipad/basics/
Maybe you are looking for
-
How to Use MRS Functionality at Activity Elements Level?
When we use Multi Resource Scheduling for resources in PS, we specify "Resource planner process" as process variant at the network header and the Resource planner node. In the other hand, at the network operation level we are able to choose the same
-
Scheduling start date and end dates
Hello Gurus, I am trying to understand the schedule start date and schedule end date functionality in Plant Maintenance. I do understand the basic start and end dates. Currently I set up u201C3.Do not adjust basic dates, dep rqmts to order startu201D
-
Two iterators based on the same view issue
Hi I'm using jdev11.1.1.2 My requirement is to have a view object as a form on the page (with next, previous, create/delete buttons) and to have a popup with the same view object as a readonly table (only for taking a look at a table representation o
-
Dear community, I did build my website with iweb 3.0.4 and so far it did work properly. Now I added a fourth page to it. Unfortunately I am now not able to open the last page anymore, (on my server (Safari or firefox)) This last page is not the one I
-
Cinema 4D file render vs After Effects render
Hello, I love the fact that you can import Cinema4D files in After Effects, but when I render this out I get a white line arround the Cinema-layer. I have a Nvidea quatro 4000 Cuda card. In the example both are in the same settings from the C4D file.