HT3819 How do I change the Apple id that is listed as my home share on my apple tv?  I bought a used one and it has the previous owners apple id loaded in the home share.

How do I change the Apple id that is listed as my home share on my apple tv?  I bought a used one and it has the previous owners apple id loaded in the home share.

Welcome to the Apple community.
Settings > computers.

Similar Messages

  • I bought 2nd hand iPhone and was linked with previous owner. I want to contact him but i didn't get any address of him. How can iget his/her email address using that iphone IMEI or you know any idea... Please reply if you know solution .....

    I bought 2nd hand iPhone and was linked with previous owner. I want to contact him but i didn't get any address of him. How can iget his/her email address using that iphone IMEI or you know any idea... Please reply if you know solution .....

    There is no solution here and you should already have known this as you replied to a thread all about this a few up from your own post and this stated the postition quite clearly and the question was answered.
    Why do you ask the same question again?  The first answer is not going to change just because you don't like it!!

  • Bought an iphone 3GS and it wont restore, previous owner might have jailbroken it. how to fix it?

    So I bought an iphone 3GS from a friend of mine and when i try to restore it, it wont work. Now i know that it could have been the computer or it could have been that he jailbroke it and never told me but i just want to get someone elses opinion/help before i go out and spend money to try and fix it.

    There are a couple of things you can try. First, are you sure the computer you are using has never been used to jailbreak ANY iDevice (not just the phone with the problem). If you are sure of this do the following:
    Reboot the computer
    disable your antivirus and firewall
    launch iTunes
    Connect the USB end of the sync cable to a USB port on the computer itself, not a hub. Do not connect the other end yet
    Hold the HOME and SLEEP buttons on the phone until the screen goes blank - IMMEDIATELY release the SLEEP button, but continue holding the HOME button
    Connect the dock cable to the phone while holding the HOME button
    Wait for iTunes to recognize the phone, then release the HOME button
    If the baseband firmware is not corrupted or the wrong version the phone will restore and remove the jailbreak. If not you haven't lost anything.

  • Hi, I bought an iPod 2 and I jailbreaked it before. I tried to download the iOS 5.0.1 from the Settings icon on my iPad 2 and then my iPad wouldn't turn on anymore and it kept on showing a screen with an arrow pointing to an iTunes symbol.

    Hi, I bought an iPod 2 and I jailbreaked it before. I tried to download the iOS 5.0.1 from the Settings icon on my iPad 2 but then my iPad wouldn't turn on anymore and it kept on showing a screen with an arrow pointing to an iTunes symbol. I later learned that this was the recovery screen so I tried to put it out of the recovery mode by pressing the home button and power button simultaneously, but the screen kept on returning back to the recovery screen. I could not restore the iPad 2 on iTunes either, so I downloaded Tiny Umbrella 5.10.01 and tried to save the shsh. However, under the recovering devices section on the left side, my iPad did not appear and I only got a device titled ?18092..... I tried to save the shsh of this ?18902... anyways but this did not work. So, I clicked on the device and pressed the exit recovery but then my iPad2 screen went black with a white apple logo in the middle. This logo keeps on dimming and disappearing and even when I plug my iPad 2 to the computer, neither my iTunes nor the Tiny Umbrella notice it. I need urgent help! 

    eddiekero wrote:
    Hi, I bought an iPod 2 and I jailbreaked it before. I tried to download the iOS 5.0.1 from the Settings icon on my iPad 2 but then my iPad wouldn't turn on anymore and it kept on showing a screen with an arrow pointing to an iTunes symbol. I later learned that this was the recovery screen so I tried to put it out of the recovery mode by pressing the home button and power button simultaneously, but the screen kept on returning back to the recovery screen. I could not restore the iPad 2 on iTunes either, so I downloaded Tiny Umbrella 5.10.01 and tried to save the shsh. However, under the recovering devices section on the left side, my iPad did not appear and I only got a device titled ?18092..... I tried to save the shsh of this ?18902... anyways but this did not work. So, I clicked on the device and pressed the exit recovery but then my iPad2 screen went black with a white apple logo in the middle. This logo keeps on dimming and disappearing and even when I plug my iPad 2 to the computer, neither my iTunes nor the Tiny Umbrella notice it. I need urgent help! 
    At this point only a restore will fix your issue.

  • HT5569 previous owner isn't with how can start iphon5 and forget previous owner Apple ID ?

    previous owner isn't with how can start iphon5 and haw can forget previous owner Apple ID and how can I use my Apple ID ?

    If you know the previous owner contact them and have them follow the procedure given here:
    http://support.apple.com/kb/PH2702?viewlocale=en_US

  • Sed an iPad from someone and I want to go into App Store to update apps, but when I click on the update button, the previous owners' apple Id username appears and it won't take my apple id password. How do I replace their username w/ mine?

    I purchased an ipad from someone and i set up my apple id for it but when i go to the app Store to update apps, i click on the update button for an app, the previous owners' apple Id username appears and it won't take my apple id password. How do I replace their username w/ mine? It doesn't give me an option... Help! Please!

    Cc2528 wrote:
    The iTunes Store on my iPad is set up with all my music already. And at the very bottom it shows my apple Id username. The only place it shows the previous owners id is in the App Store...
    You can probably change the ID in the "iTunes and App stores" settings on the iPad....click on the wrong account ID , select sign out, then log in with your own ID, I have not done this but I think it works.....
    but I would be more inclined to to the factory reset and start afresh.

  • I bought a used iPod and they were previously signed onto their iCloud. I have been wanting to change it but I have not been able to sign out of the previous account because I cannot sign out of "Find My iPod Touch". How am I able to log that off?

    I bought a used iPod and they were previously signed onto their iCloud account. I have been wanting to change it but I have not been able to sign out of the previous account because I cannot sign out of "Find My iPod Touch" due to not knowing the password. How am I able to shut that off and log into my own account?

    You can't.  This is a security feature to prevent the resale of stolen iOS devices.  You need to contact the seller and have him/her remove it from their iCloud account.  Or return and get your money back.  See: Find My iPhone Activation Lock - Apple Support

  • I bought a new iphone and as i was setting my apple ID account and i signed in to my account and confirmed two useres with diffrent numbers that were signed to the same apple ID and it messed up my i messege and face time. how do i fix that ?

    i bought a new iphone and as i was setting my apple ID account and i signed in to my account and confirmed two useres with diffrent numbers that were signed to the same apple ID and it messed up my i messege and face time. how do i fix that or delete one user ?

    Hello sapiii96,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    iOS: Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/ts4268
    To sign out of your Apple ID
    Go to Settings > FaceTime, tap your Apple ID, and select Sign Out.
    Go to Settings > Messages > Send & Receive, tap your Apple ID, and select Sign Out.
    Best of luck,
    Mario

  • I recently bought an iphone 4s from people who are not in the know and restore my iphone .. Now do not be in use for not having ID and password ... Owner apple owner just gave me a serial number how do I want to continue to use this ... Their telephone he

    I recently bought an iphone 4s from people who are not in the know
    and restore my iphone .. Now do not be in use for not having ID and password ... Owner apple owner just gave me a serial number how do I want to continue to use this ... Their telephone help me: (

    I am having same problem . i can not use the phone. my Carrier ROGERS checked the phone its not stolen or lost phone but after restoring always ask for apple ID of previous owner and seller is not responding to any mails or phone if some one can help me out than it will be great.
    thank you

  • How to stop the spinning ball/pizza that is stalling repairs to project on imovie 09? on macosx10.5.8 using iomega and superspeed ext h.d. as storage for the events and projects archive of a wedding video that has had audio sync problems on all share form

    How to stop the spinning ball/pizza that is stalling repairs to project on imovie 09? on macosx10.5.8 using iomega and superspeed ext h.d. as storage for the events and projects archive of a wedding video that has had audio sync problems on all share formats (iDVD, mp4, and last of all iTunes). The project label now carries signal with yellow triangled exclamation “i tunes out of date”.
    To solve the sync problem I’m following advice and detaching sound from all of the 100 or so short clips.  This operation has been stalled by the spinning ball. Shut down restart has not helped.
    The Project is mounted from Iomega and superspeed ext hd connected to imovie09 on macosx 10.5.8.
    What to do to resume repairs to the audio sync problem and so successfully share for youtube upload?

    How to stop the spinning ball/pizza that is stalling repairs to project on imovie 09? on macosx10.5.8 using iomega and superspeed ext h.d. as storage for the events and projects archive of a wedding video that has had audio sync problems on all share formats (iDVD, mp4, and last of all iTunes). The project label now carries signal with yellow triangled exclamation “i tunes out of date”.
    To solve the sync problem I’m following advice and detaching sound from all of the 100 or so short clips.  This operation has been stalled by the spinning ball. Shut down restart has not helped.
    The Project is mounted from Iomega and superspeed ext hd connected to imovie09 on macosx 10.5.8.
    What to do to resume repairs to the audio sync problem and so successfully share for youtube upload?

  • At home I have two wifi networks , I try to use one of them depending on their strength of signal, can I not save  both their passwords on Apple TV , so that I can switch to one of the two wifi networks as required

    At home I have two wifi networks , I try to use one of them depending on their strength of signal, can I not save  both their passwords on Apple TV , so that I can switch to one of the two wifi networks as required
    Also the passwords are long and cumbersome to type every time on the apple  TV remote, what is the alternative if I cannot store them on the memory of the Apple TV

    Is it possible that you are using the same password for the old O2 Study and newer O2 Apple Base Station networks?
    If so, Keychain Access is storing the old information about the old network and may be associating it with your AirPort Extreme settings based on the BSSID that William has mentioned.
    If that's the case, open Macintosh HD > Applications > Utilities > KeyChain Access and look for a listing with the old network name. Delete this entry. You may need to power down both the computer and the AirPort Extreme and restart them.

  • How do I change system settings so that users are not required to enter the mac's admin pw in order to join a wifi network?

    how do I change system settings so that users are not required to enter the mac's admin pw in order to join a wifi network?
    Right now my macbook pro requires an admin password before connecting to a new wifi network. In other words when a user that is not an admin tries to connect to a new wifi network the pop up displays indicating that it is locked and an admin password is required.
    Is there a way to remove this restriction so that a non admin can connect to wifi without the mac's admin password.

    You can enable / disable this option in System Preferences:
    System Preferences > Network > Wi-Fi > Advanced > Wi-Fi tab > Require administrator authorization to: Change networks

  • I purchased a used iphone4 and the phone displays the previous owners apple id and prompts me for the previous owners password. how do i get rid of his info....and install my own apple id number?

    I purchased a used iphone4 and the phone displays the previous owners apple id and prompts me for the previous owners password. how do i get rid of his info....and install my own apple id number?

    Login to the app store with YOUR ID. You can't use the app store without an Apple ID. If there are apps on the phone that were purchased with the original owners ID, you do NOT own them. The owner had no legal right to give them to you and they are permanently tied to the ID that was used to purchase them.
    ...i was also allowed to purchase an apple network id for this phone...
    I have absolutely NO IDEA what you mean by that. You can not "purchase an apple network id".

  • I wonder if Apple took up the old mac book pro if we bought a new one, and if yes so how much?

    I wonder if Apple took up the old mac book pro if we bought a new one, and if yes so how much? I have a 2009.

    If the old MBP is working, try selling it. However, so that both you and the buyer can avoid sleepless nights, please review this Apple article:
    What to do before selling or giving away your Mac
    It omits one important thing if the computer came with a OS version older than Lion 10.7: be sure to include the original install disks. Otherwise the buyer may not be able to use the computer and come looking for his money.

  • I purchased the One to One when I bought my MacBook Pro, and I sent it in to Apple in order for the pictures and iTunes to be transfered. When I got it home no pictures or iTunes files were on it. What do I do?

    I purchased the One to One when I bought my MacBook Pro, and I sent it in to Apple in order for the pictures and iTunes to be transfered. When I got it home no pictures or iTunes files were on it. What do I do?

    Welcome to Apple Support Communities
    If you already set up your Mac when you sent it, you should know that Migration Assistant creates a new user with the migrated data. Go to  > Log Out, and log in the new user

Maybe you are looking for

  • I need to determine if a mp4 is playing in flex

    I am building a video player in Flashbuilder 4 (Flex 4.1) that supports .flv and .mp4 and need to know how to determine if an .mp4 file is playing in flex so I can have other events work off of it. My player is of type <s:VideoDisplay id ="player"...

  • Variable Sequence issue

    Dear All, I have situation where I have 3 work books in a query. I have variable sequence A,B,C,D,E in the query properties set now when open the workbook I am getting the sequence as A C E B D. I am confused why would this happen as the sequence sho

  • Cannot start Backup of Azure VM Windows Server

    Whenever I start a backup of an Azure VM, I get the following error message: Snapshot VM sub task timed out. Please retry the operation in a few minutes. If the problem persists, contact Microsoft Support. I contacted Microsoft Support, but they told

  • Quantizati​on Error for NI AT-MIO-16E​-2

    Hi I wanted to confirm the value of quantization error for the 12-bit NI AT-MIO-16E-2 DAQ. I can take values between -10 to 10 Volts. So the quanitization error would be: = +/- 0.5*(20/(2^12)) = +/-2.44e-3 Is this correct? This seems like a high amou

  • CS4: Combining LR images to increase resolution?

    I've got a number of images of the same object, all at the edge of frame in a photo of something else! There is some text on the object that I want to read. Is it possible to combine these low-resolution images to increase the resolution? Like Merge