HT4623 i mistakenly disconnected from wireless network before ios7 update was complete. my ipad is stuck on screen showing that it needs to connect to itunes. i don't have that option at the moment- what do i do??
i am traveling and do not have access to itunes. how can i get my ipad 'unstuck' on screen showing need to connect to itunes??
You have no other option but to connect to iTunes or take it to your nearest apple store for them to reboot.
Similar Messages
-
I was downloading the latest iTunes and my computer shut off in the middle and now my phone is displaying that i need to connect to iTunes and iTunes is telling me that i need to restore my phone before it will work. I have pics that i have not uploaded yet, how do i get around this without restoring my phone? Thanks,
I have the exact same issue. I havent found our what is causing it either. Multaple re-install attempts with no success. I have to use Windows Media Center to burn audio discs. Any other advice?
-
My iphone4's battery went dead and when I put it on charge it asked for itunes. I dont have my macbook at the moment and I am worried I may loose content. Any suggestions how I can get into my phone?
Copy the iTunes folder from the disk to the Mac, and the iPhone backup to the right place on the Mac (Google for "iphone backup location"). Then when you restore you can reload the last backup.
-
iPad 2 problem. After updating to IOS 8.0.2 iPad says that I need to plug into iTunes. When I do that, the only option is to restore iPad to factory settings? iPad will do nothing until then. I have never had this problem before. Help
Hi ..
Follow Apple's instructions for recovery mode here > iOS: Unable to update or restore
You can restore from a backup. -
My ipod touch has been disabled and it says connect to itunes, and I dont have any access to the primary computer that i used first , what do I do ?
put it into recovery mode
See here
http://www.apple.com/support/ipodtouch/assistant/restore/
Then restore
http://support.apple.com/kb/HT1414
You'll probably lose all your data -
I have the Iphone 3gs and it said update required and i needed to connect to itunes so i did al that and now everytime i go to restore everything it just says error and then i have to do it again?whats wrong with it?
Are you getting an error message number with your error message? If so, what number are you getting?
-
I have an ipad 2, MC769x it is running 4.3.3 (8j2) i have been trying to upgrade to ios 5 or higher but a) I don't have a software update option on my Settings / General screen. And b) when I go into itunes I don't get tihe options suggested on the forums. I really want to upgrade my ipad as I want to buy and install some apps that are only available from ios5 onwards. I have been a big apple fan but I am now wondering if my ipad2 was a mistake.
If your are using IOS 4, see below.
http://support.apple.com/kb/HT4972 -
Hello, my iPad has been disabled, and it says that I need to connect to iTunes. As instructed I connected to the find my iPad/iPhone site to put it on the recovery mode. However, I accidentally erased my account, so please help!!! Also, I browsed a lot to find a solution, but none of them were helpful, sorry. Hopping you could help, thank you.
However, I accidentally erased my account,
How did you erase your account? A lot of people would like to know. No one has found a way of erasing an Apple id account.
Robert -
My iPad conveys that it is disabled, and that I need to connect to iTunes. When I connect to iTunes I get a message that I need to enter my pass code and open my Ipad, but I don't get the scree with the number board to open with a password. How do I fix this?
You will need to restore it. The sidebar of your iPad appears on itunes even if you dont enter the passcode. There's the option to restore it. More info:
iTunes: Backing up, updating, and restoring your iPhone, iPad, or iPod touch software -
My iPad conveys that it is disabled, and that I need to connect to iTunes. When I connect to iTunes I get a message that I need to enter my pass code and open my Ipad, but I don't get the screen to open with a password. How do I fix this?
You will need to restore it. It may not sync, but the iPad's sidebar has to appear you can restore it and it will be as the last time ou synced it to iTunes. For more info:
iTunes: Backing up, updating, and restoring your iPhone, iPad, or iPod touch software -
In Itunes I don't have a listing in the column for "Devices" so I can check to see if my Iphone can sync all my new ringtones. I have one ready to go but cannot get it downloaded to my Iphone. Where is my "Devices" heading in the column on the left side of my Itunes page?
Connect your device to computer. In iTunes left Pane, select your iPhone under 'Devices'. Then on th right Pane, select Tones tab.
-
iPhone 4s will not turn on, a screen shows up telling me to connect to iTunes to restore and update to iOs7, but when I try to restore error 2001 comes up and will not let me restore. I still cannot turn my phone on. None of the troubleshooting tips work, help??
Error 20, 21, 23, 26, 28, 29, 34, 36, 37, 40
These errors typically occur when security software interferes with the restore and update process.
FollowTroubleshooting security software issues to resolve this issue.
In rare cases, these errors may be a hardware issue.
If the errors persist on another computer, the device may need service. -
HP Laserjet CP1025nw keeps disconnecting from wireless network
I just purchased this printer yesterday and have had no luck getting the wireless network connection to stay connected for longer than a few minutes. Currently it's connected to my cisco router via ethernet and works great connected that way. I can AirPrint from all my IOS devices and from my Macbook Air and Windows 7 laptop.
I am able to get the printer to work on wireless for a short period of time - roughly 10 minutes or so. I have sent test prints from my IOS devices as well but eventually the blue wireless light on the printer begins flashing and that means it has lost it's connection. Restarting the router and printer will get the wireless back online for a few minutes and the problem comes back. I read somewhere that power cycling is a "solution" but I don't agree.
Now, I suppose I could leave it plugged via ethernet cord, but I specifically bought this printer for it's wireless printing capability and would have liked the option of moving it to another location away from my router if need be. It should work as advertised in my opinion without having to reset/power cycle anything on a regular basis.
My dad bought the same printer as it was on sale. He has asked me to set it up but hopefully he hasn't opened his box yet. I know he is hoping to use the wireless function due to the spreadout floorplan of his home office.
I have updated the firmware on the printer (and router) to the latest version and set a static IP address as well. DHCP yielded the same results. Following some advice on this forum I have even disabled SNMP though I don't think that would be the problem.
Any thoughts? Is HP even planning on providing future support in the form of firmware updates now that the printer is a pretty much a clearance item?Hi hp_ik
I understand the printer keeps losing the network connection.
I will be happy to assist you with this.
I have provided a document for the printer not maintaining a wireless connection.
I would setup the static IP for the printer to see if this will resolve the issue.
It may not be the printer, it may be your router's inability to wake the printer.
What router are you using?
Can you get into its settings?
If you can then look for and enable "Multicasting".
If not you will have to contact the router company.
Disconnect the routers power cable, wait 10 seconds, then reconnect the power cable. Wait till it's ready.
As a troubleshooting step, try connecting the printer to the router via an Ethernet cable (cat5). This is just to find out if the printer and the router are having problems communicating via wireless.
If you need more assistance just let me know.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP -
Apple TV Disconnects from Wireless Network
I've got an Apple TV that apparently likes to disconnect from my wireless network and the only way to get it to reconnect is to re-setup the network on the Apple TV. This is really getting annoying because it seems that each time I want to sync it or rent a movie I have to reenter the network key. I've performed a factory reset and always download the updates whenever they're available.
I have noticed that the Apple TV is picking up a bunch of other wireless networks in the area and mine is about 4th on the list. Though my signal is much stronger that all the others. I'm using a Airport Extreme base station as my router/access point for this Apple TV.
Any ideas? or anyone else experiencing this problem?Hi
I was having the same problem. It is most likely as was previously posted, signal interference.
As I don't know what router configuration you are using (I use Time Capsule) I am not completely sure this will work but if you download from Apple Support Airport Radar it will tell you what signal channels in your area are in use. You can then select one that no one else is using with your Airport Utility/ Manual Setup or with whatever configuration tool your router has and the problem will go away. In my case Channel 8 was best.
Hope this helps. -
I have an iPad 2 and want iOS5 when it comes out. But I just gave my MBP to my son who is in programming and needed it desperately. Will I be able to download iOS5 without a physical connection to iTunes, which I don't have now?
Thanks.
TomKing_Penguin, thanks so much for getting back with me so quickly. You mentioned downloading it from a friend's computer. Is it just a matter of connecting to his comp via USB and transferring it to my iPad? How would Apple know to charge my account for the purchase?
You'll have to forgive me. I'm up in years and not very savvy about these things!
Appreciate your help.
Tom
Maybe you are looking for
-
Hi, 1. Probably an elementary question - can I approve a folder? (so that before approval it will be hidden, and after approval - it'll be visible) 2. Can I approve all the folder's children with one action (like: "approve all") - so, if all of its c
-
JDev 10.1.3.4 on Vista 64 bit not using local timezone setting
When I try to get the current date by doing a new java.util.Date() I get the date and time but its not in my local timezone. I am in Eastern Time zone US & Canada which is GMT - 5.00. JDev for some reason keeps giving the time without subtracting 5 h
-
Alright Verizon.... This is borderline stupidity on your part.... Get NFL Mobile working for the iPad 3. Seriously? I chose to go with Verizon with my 3g iPad purchase a long time ago because of NFL mobile and used it and loved it for a good long tim
-
I have installed CS5 on a macbook pro 10.9.4. I am unable to get the updater to run to update applications to most current version. It tells me there was an error trying to download the update and to try again later.
-
FDM fails to find valid Essbase member?
Currently using FDM 11.1.2.1 with adaptor into Essbase BSO cube. All mapping works fine except for one particular Essbase member - it is valid in the outline, but when browsing in FDM to add the mapping- the member account does not show up. I tried d