HT4623 Unable to update iPhone or iPad to the iOS 7.0.4 both state an "error". But no explanation on what to do. Have attempted numerous times AND from computer. Not working. HELP!!
Not able to download and install iOS 7.0.4 on iPhone, iPad or Mac. Please advise!
Dear Jody..jone5
Good for you that can't update your iphone because I did it and my iphone dosen't work for example I can't download any app like Wecaht or Twitter..
Goodluck
Atousa
Similar Messages
-
I have a CC Photography License and tried loading the new Lightroom cc but it will not open (only flashes the welcome screen for a split second) then goes blank. I tried uninstalling it, rebooting, etc. several times and it will not work on my Mac with Yosemite. Please help!
Check out this thread: Downloaded Lightroom CC but only get a quick flash of the startup screen then nothing, Lightroom 5 still working.
-
An app continues to say "installing" when nothing is happening. It has been several hours now. It's only a book so should not take this long. I have tried deleting it and that did not work.
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
When trying to install updates, I get this message:The operation couldn’t be completed. (NSURLErrorDomain error -1102.)(102). What does that mean?
It appears Apple’s download servers are ‘overwhelmed’ today. I couldn’t download the newest iTunes update or IOS 7 and there are a lot of discussions today about not being able to download. One poster said they had chatted with App Store support who confirmed the problem.
What updates? Here is a link for iTunes which worked for me.
iiTunes 11.1.0 -
Dear all, After Software Upgrade too iOS 6 , Face Time and iMessage is Not working anymore. E Mail is working. Any Ideal what to do. Kind Regards from Hamburg Germany
Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Cheers, Tom -
Just got my airport express and it's NOT working (Help)
Hi,
I've just got my airport express 2 days a go and I've try many time to set it with my black macbook and my pc and it's not working at all...
When I've plugged it, the ligth went grenn and then solid amber and then it flashed as it was suppose to do. After that I wend in the "utility airport" on my macbook, I was seeing my airport express but when I clicked continue, the computer was searching for something for 30 minutes and then I realized that I was connected on the internet but that my networks were not configured.
So I've decided to try to do a factory reset. And then my macbook couldn't see my airport anymore. So I've try with my pc and it has recognized my airport. I've started to do the configuration, but at some point, my computer couldn't see my airport anymore...
So please help, what can I do to make airport express properly.
Thanks
VeroI really need some help please...
I've tried to connect directly my macbook to airport with my ethernet cable to configure airport express... but when I've open the airport express utility, my computer couldn't find my airport express...
PLEASE I NEED SERIOUS HELP !!!
I really think about bringing airport back to the apple store -
I'm currently unable to launch itunes from my PC. I get an error message stating that MSVCR80.dll is missing. It recommends that I re-install itunes and that may correct the issue. I've re-installed numerous times and nothing seems to be working. What should I do?
Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99968) -
I have downloaded an app and it does not work
I downloaded two apps. They are both are the same application, on;y difference is that one is the 2.0 version and the other 3.0 version.
When I downloaded the 2.0 version I thought this was the latest version, but turns out there was another newer version. But I tried the 2.0 version first and this does not work on my mac. The application is Wondershare Data Recovery. It is not able to see any devices on my mac.
So tried the 3.0 version and again same problem, does not work, funny because after careful researching on what product to buy I decided to download the trial version and it works fine. Only thing is that I need to but the full version to successfully retrive my disappeared images from memeory card, from my camera phone.
anyway the point is, I have just wasted £95, and I would like this back, or at least the problem resolved. Any help would be appreciated.
Thanks
CThe Apple Support Communities are an international user to user technical support forum. As a man from Mexico, Spanish is my native tongue. I do not speak English very well, however, I do write in English with the aid of the Mac OS X spelling and grammar checks. I also live in a culture perhaps very very different from your own. When offering advice in the ASC, my comments are not meant to be anything more than helpful and certainly not to be taken as insults.
Updated -
I only find the v3.0 in the UK Mac App Store (MAS). But on the developer's website I find two separate apps; Wondershare Data Recovery for Mac, which is v3.0 and Wondershare Data Recovery for iTunes, which is v2. Where did you buy Data Recovery for iTunes? I don't find it sold in either the MAS or the iTunes App Store.
Have you used the support link to the developer on the apps pane in the MAS? That is who Apple will direct you to contact.
Did you remove the trial version before downloading and installing the paid MAS version(s)? -
Movie streaming from computer not working after 6.0 upgrade
After the ATV 6.0 upgrade, video streaming from computer stopped working.
I'm trying to watch a movie from my computer and ATV is just sitting and buffering.
If I try and watch a preview from the video rental, it is just buffering as well.
iTunes radio is not loading.
I have the latest update of iTunes.
Regular mirroring works fine and music from the MacBook computer is working fine.
Everything worked fine before the 6.0 upgrade.I have an RM-507 N97 as well, upgraded to v20 firmware and with the GPS antenna factory fix.
It appears that the firmware upgrade changes something between the MAPS app, the MAP data and the GPS drivers which causes this issue.
Recommended course of action is to delete and reinstall map data using PC Suite or Ovi Suite.
ps. There is another apparent problem that can cause lack of GPS fix which is currently under investigation. If your N97 is "hot" (i.e. just after charging or long periods of continuous display activity), you may have problems getting a GPS fix. Also, if you run the MAPS app for a long period of time with display active, you may see loss of fix problems. -
Question:-
I created an Apple ID using my ISP Email when I registered at the Store/Apple Support Communities/iTunes/Face Time or other portal and it does not work in iChat. Why Not ?
Answer:-
For a Name to work in iChat it has to be an Valid AIM screen Name.
Only Apple IDs from the @mac.com ending names registered here and the Mobileme (@Me.com ending) names are Valid with the AIM service as well as being Apple IDs
(I am still working on info about registering with iCloud at the moment but if this does give you an @Me.com email it may well be a valid AIM name as well)
NOTES:-
The @mac.com page works by linking an external (Non Apple) email with a @mac.com name.
This External Email cannot be one linked to an Existing Apple ID (you have to use a second email or register at AIM )
The options at AIM are to use your existing email or create new name and link the existing only for Password recovery
MobileMe (@me.com ending names) were valid Emails addresses, Apple IDs AND a Valid AIM Screen Name
@mac.com names look like emails but are only Apple IDs and iChat/AIM Valid Screen Names.
The AIM registration page seems to be pushing you to register [email protected] This is relatively new and I have not followed through the pages to find out if it a valid AIM email (Previously you could register a name without an @whatever.com suffix)
8:16 PM Friday; June 10, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb( 10.6.7)
Mac OS X (10.6.7),
"Limit the Logs to the Bits above Binary Images." No, SeriouslyQuestion:-
So I have my current [email protected] email in iChat as I thought as I had linked that to an Apple ID it was a Valid iChat Name. It keeps coming up with a UserName or Password Invalid message. What do I do next ?
Answer:-
Open iChat
Go to the Menu under the iChat name in the Menu Bar and then Preferences and then Accounts in the new window.
Commonly written as iChat > Preferences > Accounts as directions/actions to take.
If it displays with a Yellow running name in the list you have a choice.
Either register it at AIM (I would use a different password to the ISP Login) and then change the password only in iChat (It may take you to confirm any Confirmation email from AIM first) in iChat > Preferences > Accounts
Or you register a new Name at AIM (Or at @mac.com) and enter that (details below)
If you have a Blue Globe name (@mac.com) that will not Login the chances are that it the password that is the issue.
Apple lets you create longer passwords than can be used with the AIM Servers.
Change the Password at iForgot to no more than 16 characters.
Then change the password in iChat as details above.
Adding a new Account/Screen Name in iChat (that is valid with the AIM servers)
Open iChat if not launched.
Go to iChat Menu > Preferences > Accounts
Click the Add ( + ) Button at the bottom of the list.
Choose in the top item drop down either @Mac.com or AIM depending on what you registered
Add the name (with @mac.com the software will add the @mac.com bit)
Add in the password. (If you don't add it now iChat will ask you each time you open it)
Click Done.
The Buddy List should open (New Window)
The Accounts part of the Preferences should now have the new name and you should be looking at the details.
You can add something in the Description line which will then title the Buddy List (Useful when you have two or more names) and make it show up as that in the iChat Menu > Accounts and the Window Menu of iChat when logged in.
You can then highlight any other Account/Screen Name you don't want to use and use the Minus ( - ) Button to delete it.
8:39 PM Friday; June 10, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb( 10.6.7)
Mac OS X (10.6.7),
"Limit the Logs to the Bits above Binary Images." No, Seriously -
Printing wirelessly from computer not working
I am trying to print wirelessly from my computer but when trying to print a word document, it does not work. In the "select printer" tab, the only options available to me are Fax (USB) and Fax (Network)...the printer is in "fax" mode and it will not allow me to print the document.
I do not have a landline and therefore do not need the fax option but it seems to have been automatically set and I do not know how to change it.
How can i set up my word/excel to print wirelessly to my HP 4620, how to take off the fax?To remove the fax driver, just right mouse and uninstall. There should another printer that is the similarly named without the "Fax", use that printer to print.
Also, how come you have Fax (USB) and Fax (Netowrk)? Did you install the driver twice, once as usb and another network? The computer can only have that printer either as usb or network, but not both. -
Can not install windows 7 pro using boot camp as mouse and keyboard will not work Help please
I have a new iMac and trying to install Windows 7 Pro using boot camp. I have reached the stage of starting to load windows from the DVD then discovered the mouse and the keyboards not working so I could not interact with windows installation.
Open, if not so already, the Windows formatter. Identify the BC Windows partition. It will be the one listed with the proper size you created and/or will be labeled as a C: drive. Be careful you select the right one or you may be corrupting the entire drive.
Format the partition as NTFS. -
How do I reset my computer password so I can download software to my computer? This is different than my apple ID,
I wrote it down but it is not working. Need helpYou have encountered the Activation Lock. If you are trying to activate an iPad or iPhone and it is asking for a "certain" (your word not mine) Apple ID and password, you have encountered the Activation Lock. This is a security feature that prevents thieves from setting up and using a stolen or lost iPad or iPhone. You have no alternative. You must enter the certain" Apple ID and password to use the device. If you cannot do this you will never be able to activate the device and no one can help you do it.
-
Fact Time and iMessage will not work on
Face Time will not verify my emails and phone number on my iMac. Face Time is working on my iPad 2 and iPhone 5. All were working fine up until 2 days ago. I tried to Face Time on my iMac and I had to login and verify. Verify would just spin, spin, spin. iMessage will not work on the iMac as well. Same thing, was working fine up until Face Time quit functioning. All devices have been working on the same router/Wi-Fi. My operating system is Mavericks. Have had no problems until now. HELP!
Hello there, bowlinggolfer.
The following Knowledge Base article offers up some great steps for troubleshooting issues with FaceTime for Mac:
FaceTime for Mac: Troubleshooting FaceTime
http://support.apple.com/kb/TS4185
This other article includes recommendations for Messages as well:
FaceTime, Game Center, Messages: Troubleshooting sign in issues
http://support.apple.com/kb/TS3970
Thanks of reaching out to Apple Support Communities.
Cheers,
Pedro. -
My home button on my ipod touch 4th Generation is not working.. I have restared it several times and have not had any luck...Any suggestions???
Try:
fix for Home button
iPhone Home Button Not Working or Unresponsive? Try This Fix
- If you have iOS 5 and later you can turn on Assistive Touch it add the Home and other buttons to the iPods screen. Settings>General>Accessibility>Assistive Touch
- If not under warranty Apple will exchange your iPod for a refurbished one for:
Apple - Support - iPod - Repair pricing
You can do it an an Apple store by:
Apple Retail Store - Genius Bar
or sent it in to Apple. See:
Apple - Support - iPod - Service FAQ
- There are third-party places like the following that will repair the Home button. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Maybe you are looking for
-
I am using Windows 8. I downloaded the latest update from a few days ago 1/22/2014. Now my Iphone isnt being registered by Itunes. The computer recognizes it and it charges the phone. Message was edited by: JamesBa1
-
Does anyone have any experience of the sleep/wake button becoming stuck? One minute it was fine, the next it is jammed and I can't switch the phone off.
-
Save to XML: image attribute defined twice
Hello all, I am saving a structured document to XML and run into an error I cannot explain - or solve: I place graphics inside an anchored frame, which is aligned right with the image centered in the frame. Saving the document to XML generates an err
-
Hi All, Recently, there is change in excise duty rate from 10% to 8%. But the problem is if we want to sale/purchase the material (old stock of higher excise rate i.e 14 or 10 %) then how to do it? Because system does not allow the change in tax code
-
Mobile module intermediate files?
Where does the Mobile Module store its intermediate .c and .obj files? I get a build error: error LNK2001: unresolved external symbol state and I'd like to get some sort of hint who uses this symbol. Thanks!