Mail application does not import messages after installation of yosemite 10.10

after installing yosemite 10.10 mail does not start up but gives a message that the mail index is damaged. how do i get it to import my messages and star up again.

Hello CMK1950,
The article linked below details a number of steps that can help get your Mac to successfully boot up.
Mac OS X: Gray screen appears during startup
http://support.apple.com/en-us/TS2570
Cheers,
Allen

Similar Messages

Mail application does not respond even after forcing quit over and over

My mail application is not responding. I have forced quit at least 5 times and I still get the beach ball. This just started happening 2 days ago and now I can't access my mail at all.

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

Mail does not receive messages after upgrade to Yosemite

Just upgraded to Yosemite. Mail will send but will not receive messages.
Anybody else have this issue?

Mail troubleshooting - Yosemite
Troubleshooting Apple Mail
Troubleshooting sending and receiving email messages
Troubleshooting sending email messages
SMTP servers keep going offline

HT4718 I upgraded to Mavericks and my mail application does not load and give an error screen.

Mail application does not work after upgrade to Mavericks.

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter the name of the crashed application or process in the Filter text field. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, look under User Diagnostic Reports (not "Diagnostic and Usage Messages") for crash reports related to the crashed process. The report name starts with the name of the process, and ends with ".crash". Select the most recent report and post the entire contents — again, the text, not a screenshot. In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.) Please don’t post other kinds of diagnostic report — they're very long and not helpful.

Mail not importing messages after upgrade to tiger

I've just upgraded to Tiger. Everything is working well, except mail. The initial process of importing messages goes on forever! I left it running overnight, and it still was not done. I have tried cancelling and restarting. I have also restarted the machine several times. It looks like the process is just stalling. i do have over 2000 messages in my mailbox, but even so, 8+ hours seems excesive.
Does anyone have any suggestions?
Thanks
Powerbook G4 15" Mac OS X (10.4.7)

Mail troubleshooting - Yosemite
Troubleshooting Apple Mail
Troubleshooting sending and receiving email messages
Troubleshooting sending email messages
SMTP servers keep going offline

Mail does not retreive messages after upgrading to Mountain Lion

I just upgraded my work iMac (2009) to Mountain Lion last night and now it will not retreive any messages from my work email account (POP). It was working fine yesterday (and for the past 3+ years) while I was still on Lion, but despite searching for answers and trying multiple solutions for several hours, I still cannot get it to work. Among other things, I have deleted and then added the account back (multiple times); restarted the Mac (multiple times); and zapped the PRAM, but nothing has fixed it yet.
When I select "Get Mail" from that mailbox and watch the Activity Monitor, it connects to the server, says "Fetching new mail", then "Preparing to retreive new mail", but it then just disappears after about about a minute and makes the "no mail" beep. There are no error messages, but I can see in the bottom "Mail Activity" window that it says it's downloading 40+ messages but nothing shows up. The mail account still works on my iPhone and I can check the mail on my webmail server, so I don't think it has anything to do with the server especially since it worked fine yesterday.
Any insight would be much appreciated because it's driving me crazy!!

I forgot to mention (and add a new level of strangeness) that Mail is retreiving all of my messages from my personal (AT&T) account without issue.
And I just discovered an even bigger problem: all of my emails from my Sent and other folders from my work account are completely gone!
I may have no choice but to revert to my Lion system as of yesteday, before I installed ML.

BSP does not show up after installation of service pack 9 on BW 7.0

Hi,
We are working on netweaver 2004s.
We have a very simple BSP page, which has been developed in BW box. Its just used to load flat files to the application server.
It was working well when we were at service pack 8. Recently we have installed service pack 9 and this BSP page either through portal or directly in web-browser does not show up at all i.e all we see is a blank page and the status bar of the browser keeps running forever.
Could you please advise what has gone wrong and is there a fix to this.
Note: other 2 BSP pages in the same BW system are working fine.
kind regards,
Waseem.

Hi Raja,
Thanks for your prompt reply.
I activated the BSP page and re-tested but it does not work.
When I activate in SE80, I get the message 'Active object generated'.
When I run it through portal or web-browser ... it does not show any message but the status bar of the browser keeps moving .... forever, indicating its doing something.
There are other 2 BSP pages which are working fine, but this BSP page ( which is the most important) is giving this porblem.
kind regards,
Waseem.

Photos not imported message after opening iPhoto 08

Has anyone ever experienced following Problem:
Everytime I open iPhoto it appears this error message: "9 photos have been found in the iPhoto Library that were not imported. Would you like to import them?". If I choose yes, iPhoto shuts down after a short while. If I choose no, it works, but everytime I do so, one foto is added to the fotos left to import.
How do I get rid of this fotos?

alterkram
Welcome to the Apple Discussions.
Go to your Pictures Folder and find the iPhoto Library there. Right click on it and choose 'Show Package Contents'. A finder window opens with your library inside. You should see a folder there called 'Importing' or perhaps 'Last Import' (NOT Auto Import). In side will be the offending files. Drag that folder to the desktop and launch iPhoto. Does it work normally?
Regards
TD

Conversation Translator does not show up after installation

Hi,
I installed the Conversation Translator for Lync 2010 from conversationtranslator.com. The installation was successful but the add-on does not show up. I used it before on a different network and it was working fine. I don't know what to check to figure
out why its not working this time. Note: I am connecting to our network through VMware (VDI). The colleague of mine who is connecting directly managed to install and is able to use.
Could you please help?

Hi Raja,
Thanks for your prompt reply.
I activated the BSP page and re-tested but it does not work.
When I activate in SE80, I get the message 'Active object generated'.
When I run it through portal or web-browser ... it does not show any message but the status bar of the browser keeps moving .... forever, indicating its doing something.
There are other 2 BSP pages which are working fine, but this BSP page ( which is the most important) is giving this porblem.
kind regards,
Waseem.

IChat does not receive messages after a few hours

I always leave my computer on at night since I often get chats from overseas that I don't want to miss. Ever since I have started using iChat 5, these messages never arrive at my computer anymore. I am also using it in conjunction with AIM on the iPhone. Could that be causing the problems? Ususally the chats arrive on both iPhone and Mac.

Hi,
Welcome to the  Discussions
This can be a case of sorting out whether the computer Sleeps,
Whether it is receiving Off Line IMs,
and How your Forwarding was set up.
Use this page to Login to AIM
https://settings.aim.com/
Once you do that it should return to this page but will have your Name on it.
At that point you can check the Off Line IM status.
If you computer sleeps then ichat may well start faster than the computer reconnects to your LAN - in which case iChat does not login again.
This may mean it is "Missing" IMs when technically iChat is Off line.
I have never set up forwarding but you might have to check device order priorities. If the Phone is Off does it default to the computer ?
Is it supposed to be gong to Both ?
On that Settings page they call it Mobile (rather than Forwarding).
Hope this give you some ideas about where to look.
10:52 PM Saturday; April 9, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

Photoshop 5.1 does not open up after upgrading to Yosemite on a 2009 mac book pro

Adobe Photoshop 5.1 does not work after installing upgrade Yosemite. I have a mac book Pro - 2009

Have seen CS3 (I have) mentioned as working with Maverick/Yosemite
Current Photoshop is creative cloud - you do not have to purchase all elements - instead of lump sum, Adobe charges a monthly license fee - the software resides on your mac - and the mac has to check in once a month to keep the license going - updates are part of the deal.
CS6 apparently is still available if you want to pay the lump sum for an upgrade.

Mail Application Does Not Quit Properly

I have a brand new iMac 20" and a new .Mac account. My son has an older PowerBook G4 and a separate .Mac account of his own. We both experience the same problem on our Macs...
Sometimes when we use Mail to check our .Mac e-mail after we are done using the program we go to quit the program. Sometimes, not all the time, the program window closes (it disappears from the screen) but the little triangle still stays under the Mail icon and the word Mail stays in bold in the top left-hand corner indicating that the program is still open. It will stay that way for hours if we let it.
The only way we know to get rid of this is to force quit Mail but we are assuming that is the wrong way and/or does damage. My son's PowerBook is somewhat older, but has barely any e-mails in his account. My iMac is brand new (as is my .Mac account) and has very few e-mails as well.
What seems to be causing this and how can we fix it? I am unable to shut down my Mac until I force quit Mail... otherwise when I go to shutdown nothing happens.
Thank you.

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

HT1766 my iphone 3gs does not activated when after installation of software its not working not opeing

Dear Supporters,
Last night when i installed new software through connected by itunes the software installed but now just detailed below when i try to start give bellow options and than not working
1st, language. i select ENGLISH
2nd Country, i select PAKISTAN
3rd, wifi, i on wifi
4th, activateing your phone and in runing condition
''it may takes a few minutes to activate your phone'' after this option the error comes which is bellow
''TRY AGAIN
your iphone could not be activated because the activation server is temporarily unavailabe. Try connecting your iphone t iTunes to activate it, or try again in couple of minutes''
so please kindly resolve this above given problem
thanks
Regards
Javed Hussain Karachi Pakistan

Generally this is a sign that the iPhone had previously been
hacked/modified/jailbroken and the update relocked it to the
original wireless carrier. If this is the case, only that wireless
carrier can unlock your iPhone. You must contact them to see
if they offer unlocking and if you qualify.
Where did you acquire this iPhone?
What wireless carrier did you use before this problem?
Does the app Cydia appear on your iPhone?
What does it say when you look at Settings=>General=>About=>Carrier?
Unauthorized modification of iOS
http://support.apple.com/kb/HT3743

N8 Social Application, does not stop traffic after...

Hi!
Why does the edge icon stays connected after exiting the social app?
When I go to connections I can see that the phone sends and receives traffic and I have to force it to disconnect two times before it stops!
N8 FW: 022.014 -- Please separate Artist & Albums!
N86 8MP FW: 30.009 -- We need a new FW on this phone!
E51 FW: 410.34.001
E70 FW: 2.0618.07.10 -- Why no v3 for my code?

Still got this problem on Social Application 1.3
N8 FW: 022.014 -- Please separate Artist & Albums!
N86 8MP FW: 30.009 -- We need a new FW on this phone!
E51 FW: 410.34.001
E70 FW: 2.0618.07.10 -- Why no v3 for my code?

Application does not start automatically after J2EE restart

Hi,
Is there a way to automatically start the deployed applications after a J2EE restart. We have a .ear file which we have to redeploy everytime we restart the J2EE engine. We are on 6.40 SP15.
Regards,
Parvez

Hi Parvez and Ivaylo,
Has any of you used the startup mode setting? I tried using it and set it to always but the application still won't start. Is there anything I'm missing?
My application-j2ee-engine.xml looks like this:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE application-j2ee-engine SYSTEM "application-j2ee-engine.dtd">
<application-j2ee-engine>
     <provider-name>nexeninc.com</provider-name>
     <fail-over-enable
          mode="disable"/>
     <start-up
          mode="always"/>
</application-j2ee-engine>

Mail application does not import messages after installation of yosemite 10.10

Similar Messages

Maybe you are looking for