HTML into Flash please help!

I want to put a HTML webpage into a certain field that is
scrollable and when a link is clicked that box will change to give
the content from the new page in that field ... please help, and
also can javascript hover-off links from a webpage be put into
flash?

1. Flash contains a TextField component which has
limited
html support, not enough to support the usual html required of
an active web page.
Supported
html tags for Flash Player 8
2. You can use usual html
anchor
tag in a Flash TextField.
3. You need to turn on html for a Flash TextField. This can
be done in the
IDE
or in
Actionscript.
4. You can also use
CSS
formatting in a Flash TextField.
5. For rollovers of specific parts of a Flash TextField, you
will need to use Actionscript and generate TextFields for each part
of the addressable text such as every word or every phrase goes
into a separate TextField and then the TextFields are aligned to
appear as one larger TextField.
Flash requires a different design mentality than do
HTML/CSS/JavaScript pages. So there are more creative approaches to
present the information you have using Flash that are not easy or
even possible in HTML/CSS/JavaScript.

Similar Messages

Putting html into flash

I need help by putting html into flash. Here's my problem.
I need to put a paypal shopping cart into my site on flash 8
pro and can't seem to find a way. All I need to do is just put the
code somewhere and want to have the shopping cart on my page. Could
someone experienced enough please help me?

I do not believe flash has a web browser built into it that
can parse html code!
What you asked does not make much sense. What exactly are you
trying to do?

I am having a problem converting word onto PDF . PDF into word.Please help .I am signed and paid to Feb 2015

Can someone advise me why I am having this problem

Always in the past .I have my Word Document on screen and then I go to
Publish and it atomatically PDF the doc.
The same if I have a PDF to convert to word. I have the PDF on screen and
to the right of my screen it will say Convert .I press on convert it
converts to word
In a message dated 12/17/2014 10:01:32 A.M. Eastern Standard Time,
[email protected] writes:
I am having a problem converting word onto PDF . PDF into word.Please help
.I am signed and paid to Feb 2015
created by florencejohn (https://forums.adobe.com/people/florencejohn)
in Adobe Acrobat.com Services - View the full discussion
(https://forums.adobe.com/message/7023171#7023171)

HELP!!! My flash video skin isn't showing up or working when i put it into dreamweaver, please help.

When I export my flash project, and import it into dreamweaver, i go to the trailer page and the video, one, won't give me the skin to hit play, stop, pause, rewind, volume, etc. and two, when you travel to another page it continues to play the movie in the background. Can someone please help me fix these issues please!
Link: http://ghsglobaltech.guhsd.net/students/2011_2012/web/web_36/Classwork%20Site/Assignments/ hunger-games.html
>>Click Trailer at top of page to get to the video

Hi avmary11,
If your are having issues with your iPod not being recognized by iTunes (but it is being recognized by the computer), you may find the following article helpful:
iPod: Appears in Windows but not in iTunes
http://support.apple.com/kb/ts1363
Regards,
- Brenden

Embedding HTML Into Flash?

Let me start with the fact I only know some AS2. AS3 tends to go over my head. So I'm using Flash 8
If I need FlashCS5 to do this, then, PLEASE, let me know.
Here's the situration.
I manage and build a number of sites. Many are parts of a network. The goal is to join them all as one. Both without using php (don't know php), and without having to leave primary page. A Flash Site is the plan. But that is a TON of work to re-create entire sites flash that are already large and established.
So I got to thinking. What if I embed the HTML/CSS sites into Flash itself? That way they can still make their changes and it'll effect both the HTML version as well as it's mirror/portal via the Flash site?
In Short:
I want to embed this page on one frame in Flash:
http://www.uga-international.com/About.html
And place a link to another KeyFrame that has this page/site embeded:
http://www.melholder.com/MAIN.html
How would I go about doing this?
====
Then it got me thinking even more. If this works, would it be possible to load a SWF video player (Webstunning FLV Player) into Flash and run it as if it's part of the Flash site?
I thought the Loader Component would do this for me. But it keeps saying it can't locate the "playList.xml" file. The player has outside files it referances. This eoor prevent the player.swf from playing period.
So how would I go about getting the loader to player external .SWF files that referance external .XML files?
Here are two sample pages using different .SWF files that referance external .XML files:
http://www.melholder.com/index.html
http://www.dovm.org/TEST1a/Test1a.html
Thanks in advance.

Thank you for you help and patience.
But your last statement "copy and paste your frameset encoding" just got me lost.
In Flash, I know how to use the "MyLoader" to load an outside file (but loading HTML pages in it does not work) But it only has these Parameter options:
autoLoad:True
contentPath: "URL goes here
autoScale:True
I also know how to point a button's AS2 to open a URL page.
on (release) {
getURL("URL Link Goes Here",_blank);
Those are the only pointing methods I know.
Now that I think about it. do I change the "_blank" part of the AS2 code to the name of the Iframe instead?

Changing li tag in external fed HTML into Flash

Hi
Really simple I hope someone can help me as I cant find any resource on the net that will help and hopefully somone has encountered the same problem.
Ive got some external HTML text being fed into flash, all I want to do is to edit the <li> tag in the HTML (not CSS) so the bullets sit flush to the left with the rest of the text, thats it! is there something i can put in the HTML that will resolve this such as:
<li left="-20px">example</li>
what ive got=
CS4 AS2
I proposed a simlar question but maybe i wasnt clear.

Sudheendra,
Please provide the link. I don't think it made it into your post.
Rusrusrus,
It is a good question. And I look forward to the answer. I struggled with this awhile ago. The default styling of <li> in htmlText is horrendous.
I believe there is a way to adjust the left margin of the lists with flash's limited css support... but the spacing between the bullet and the text is not adjustable.
http://flash-reference.icod.de/TextField/StyleSheet.html
margin-left is probably what you are after.

How to convert flv into mp3 -- please help!

hi,
i'm very new to using videos in flash. i uploaded a video into flash in order to add texts to it to upload later to web. my problem is converting the fla file to mp3. i tried the video encoder but i'm stuck. please help if you can..it'll be very much appreciated. thanks!

i think i see where the problem lies. the file i worked on in flash (i inserted some texts into the video) are saving as .fla. how do i get it to change to flv in order to use the service you suggested? thanks a bunch!

My iphone is disabled it saying to connect to itunes but when i do it still wont let me type my pin into it please help :(?

Please help my phone wont let me type in my password and when connected to itunes it wont let me type my password in still

You need to restore the iPhone, not just connect it. If iTunes says that the iPhone needs to be unlocked before it can be restored, put the iPhone into Recovery Mode:
http://support.apple.com/kb/ht1808
and then restore it.
Regards.

Text editable in images in flash Please help

Hello
Dear All Friends
I want to make text editable in images in flash to get copy from text
can i Make this
and other question please
can i convert text in image in flash to normal string ?
please help
Thank you

Images do not store text data in any isolateable manner, it is comprised of just pixels like anything else in the image. You would need to develop some form of complicated text recognition program to be able to extract text from an image, and I don't believe anyone has.

Newbie to Flash Please Help!

Link here:
http://www.moldex.com/mask.htm
I have 19 frames PNG created....I imported PNG into
flash......as 19 frames. I want to just be able to mouseover each
text and then a different mask image appears on mouseover. All my
19 frames look exact but with different mask image. Also how do I
underline text in flash?

Hi whiskey3 from your msg, I assume you would want to change
the image on mouseover of each link. To explain all steps might be
a bit long here. However, basically you can achieve this by using
'Buttons'. Try some of the tutorials in Flash. It will help you a
lot. By the way, what you want to achieve sounds easier to be done
in dreamweaver with javascript.

Reading 8kb tiff image and then writing into backend. please help

Hi All, Please Help ..
My aim is to read a tiff image which of 8kb 1732x717 size, and then store it into backend.
what I did is read the image into bufferedImage and then used tiffencodeparam with compression_none but the problem is size is too much after encoding.
code sample
BufferedImage image = ImageIO.read(tiff_filename); to read tiff image
to write tiff image
TiffEncodeParam p = new TiffEncodeParam();
p.setCompression(TiffEncdeParam.COMPRESSION_NONE);
FileOutputStream out = new FIleOutputStream(tiff_filename);
ImageEncoder e = ImageCodec.createImageEncoder(""TIFF,out,p);
e.encode(image);
out.close();

I got all my pictures AND everything else back, folders, ratings, keywords etc
Fortunately I had a backup of the entire iPhoto library folder, it was about 3 months old (I know shame on me) so I didn't want to just use the entire backup folder and lose 3 months of photos.
So I just copied the AlbumData.xml file and the Library6.iPhoto file. PRESTO all my pictures were back WITH all the folders,keywords etc, etc intact!! (up till the 3 month old backup point).
Then I just re-imported the missing 3 months worth of pictures from the original folder in the iphoto library folder. So all I had to recreate was 3 months worth of customization. WHEW!!
Reading through the discussions it seems there is a fair number of users where iPhoto would go empty, but they knew the images were still on the computer. I am not a programmer, but it seems silly to me the their are files that get re-written everytime iPhoto closes....computers crash. and then what happens to the files? Mine got corrupted, lesson learned BACKUP more frequently!!
Thanks to Old Toad who steered me to the Library6.iPhoto as a possible troublemaker in another thread!

Actiontec GT701C DSL light keeps flashing please help

I use to have the WIFI router from verizon but the wifi range was not strong enough for certain items in my home... in addition the items could not even find the network on wifi. i replaced it with a Actiontec GT701C so i could use my old wireless router that was strong enough to support my whole home .. But know when i connect my DSL line to the New modem the GT701c i can not access the internet .. i Could get to the configure screen but other than that the DSL Light keeps flashing any suggestions.. i have rebooted the modem and tryed diffrent phone line and phone jacks in my home please help !!!

Does your older modem connect still? If so, could you tell us which modem it is so that we could help you obtain the Transceiver Statistics from it? It's possible the ActionTec could either be defective or it could be sensitive to noise on the line if the signal isn't the greatest.
========
The first to bring me 1Gbps Fiber for $30/m wins!

Unable to transfer my local videos into itunes.wnloaded itunes to my windows 8 but i am unable to transfer my local collection into itunes. please help ,e

i have recently downloaded itunes into my windows 8 but i am unable to transfer my local videos and movies into the itunes though i can transfer my music.
please help me to find out the problem. as well as i already have a data into my iphone and what if i will connect it to my laptop so would it be erase the data coz i dont wanna loss it.

Click here and follow the instructions.
(80232)

Another person who has a problem with Flash - Please Help!!

I have a Dell Dimension 4700 Intel (R) Pentium (R) - 4 CPU 2.80 GHz 2.79 GHz 504 MB of RAM
For a few years now I would have to restore the computer to an earlier time after an update was done in order to view youtube, etc. It seemed that when my computer did an automatic update it would mess up the flash player.
My husband just recently did another update and now the flash isn't working and the computer won't restore anymore.
I keep getting the following messages: adobe flash player active x set up failed to install 19166
program error: failed to register status installation complete
I have uninstalled and installed the flash several times
everytime i go to install flash it says: Adobe Flash Player 10: This application has been downloaded before. Reload?
Then I get: Your security settings do not allow websites to use ActiveX controls installed on your computer.
I don't want to take this somewhere because I have a feeling that will just wipe the computer clean and I have a feeling it is something stupid that I'm not doing.
Please Help.

OK...Check, check...did all that. I am cutting and pasting a segment from the flash troubleshooting page because its exactly what is happening to me. There were no responses to help this person.
"I've tried installing flash player 9 but am not able to do so. It will begin installing but when it gets to 'items remaining: 4' the progress bar continues to move and underneath says searching but nothing happens. I tried leaving it on all night but same thing when I came back in the morning. When I close the installer it then says 'stopping now may result in an incomplete set of software' Also, when I tried uninstalling previous versions, the uninstaller does nothing. It says 'items uninstalled: 0' and 'processing', but same thing, the thing spins but nothing happens. i tried the other steps given to see if that helped but nothing seems to work."
Here is the page...
http://sdc.shockwave.com/cfusion/webforums/forum/messageview.cfm?forumid=44&cati d=184&threadid=1267248&enterthread=y#4577694
I tried some of the suggestions above the last two posts. But it looks like my problem is the same as those.
I even tried to post on there but from what I see it looks like I have to have flash to do it...I get the page with the blue lego brick.
I'm pulling my hair out. I didn't realize how much of the internet ran on flash.

MS Azure - Can Logon says Free Trial Active But I cant get into portal , Please help ?

Good Day all ,
Last Week I subscribed to the free trial of MS AZURE ,
created an account , used a credit crd , got confirmation from MS Azure,
with link http://account.windowsazure.com
I logged in and was able to go to portal no problem.
Today I log in but cant get access to portal.
Get I have no Subscription but when on Subscriptions it says Free Trial , Your free trial expires in 26 days.
Please help
Thanks
Ciao

Hello,
I see that you are trying to log into the accounts portal. Please try logging into the management portal ( Old azure portal ) / Ibiza portal ( New Azure Portal ) using the below links.
1. Management Portal https://manage.windowsazure.com
2. Ibiza Portal https://portal.azure.com/
https://account.windowsazure.com is an accounts portal, only the account owner can login to the account for viewing the billing details etc.,
Regards,
Shirisha Paderu

HTML into Flash please help!

Similar Messages

Maybe you are looking for