HU Identification in document flow

Hi
whether it would be possible to have the HU Identification in stead of the HU number in the document flow?
Regards
Dinesh

hi
i do not think so you will get the Identification
Edited by: AP on Apr 3, 2009 10:45 AM

Similar Messages

Multiple contract assignment using document flow

hello
i need to attach mulitiple contracts to diffrent lines items of the service order using document flow.
One needs to attach contract header at the service order header and contract item at the service order item.
This works fine if you try to attach single contract to single line item in servie order.
But when you try to attach another contract to different line item of the service it gives dump.
The system issues an error message CRM_DOC_FLOW 010 and gives dump.
Has anybody faced this issues before.
Pls advice.
Regards
Meghana

Hi Shaik i have a similar requirement but in my case iam using BAPI_ACTIVITYCRM_CREATEMULTI to create activities and
i want these activities to be link to campaign element,i had a look at structure BAPIBUS20001_DOC_FLOW_INS and i see there are few fields in this structure like OBJKEY_A- Identification of a Reference Object for Items,OBJKEY_B-Identification of a Reference, i feel this were we have to pass some values if you wanna to link the activity with campaign element, i donno when to use
OBJKEY_A and when to use OBJKEY_B, can you please help me how can i do this is it possible to do it in same program while creating activity or has to be done seperately after the activity is created.
any more ideas you have please
Thanks

Purchasing document flow.

Hello friends,
Could anyone plz tell me the link & the document flow between RFQ, purchase requisition, outline agreement, contract, quotation, scheduling agreement, PIR, puchase order?
When Source determination is carried out, what is the priority in which the source is determined?
Thanks,
Cmehra.

Dear C Mehra,
PR >Release the PR>RFQ>Quotation>Quotation Comparison>PO>Release the PO>GR>Invoice Verification
MM Process flow:
Process Flow
The typical procurement cycle for a service or material consists of the following phases:
1. Determination of Requirements
Materials requirements are identified either in the user departments or via materials planning and control. (This can cover both MRP proper and the demand-based approach to inventory control. The regular checking of stock levels of materials defined by master records, use of the order-point method, and forecasting on the basis of past usage are important aspects of the latter.) You can enter purchase requisitions yourself, or they can be generated automatically by the materials planning and control system.
2. Source Determination
The Purchasing component helps you identify potential sources of supply based on past orders and existing longer-term purchase agreements. This speeds the process of creating requests for quotation (RFQs), which can be sent to vendors electronically via SAP EDI, if desired.
3. Vendor Selection and Comparison of Quotations
The system is capable of simulating pricing scenarios, allowing you to compare a number of different quotations. Rejection letters can be sent automatically.
4. Purchase Order Processing
The Purchasing system adopts information from the requisition and the quotation to help you create a purchase order. As with purchase requisitions, you can generate Pos yourself or have the system generate them automatically. Vendor scheduling agreements and contracts (in the SAP System, types of longer-term purchase agreement) are also supported.
5. Purchase Order Follow-Up
The system checks the reminder periods you have specified and - if necessary - automatically prints reminders or expediters at the predefined intervals. It also provides you with an up-to-date status of all purchase requisitions, quotations, and purchase orders.
6. Goods Receiving and Inventory Management
Goods Receiving personnel can confirm the receipt of goods simply by entering the Po number. By specifying permissible tolerances, buyers can limit over- and underdeliveries of ordered goods.
7. Invoice Verification
The system supports the checking and matching of invoices. The accounts payable clerk is notified of quantity and price variances because the system has access to PO and goods receipt data. This speeds the process of auditing and clearing invoices for payment.
Pur info record is nothing but a master data like thing which will be maintained for different materials to determine the prices etc.It Specifies the number that uniquely identifies a record.
For Example: an info record is based on Plant Vendor and Material
Based on these three the Material Prices will be calculated
for different combinations different values are taken into consideration.
During pricing it brings these values automatically based on this info record.
Use ME11 Tcode to create this record.
Common Tables used by SAP MM
Below are few important Common Tables used in Materials Management Modules:
EINA Purchasing Info Record- General Data
EINE Purchasing Info Record- Purchasing Organization Data
MAKT Material Descriptions
MARA General Material Data
MARC Plant Data for Material
MARD Storage Location Data for Material
MAST Material to BOM Link
MBEW Material Valuation
MKPF Header- Material Document
MSEG Document Segment- Material
MVER Material Consumption
MVKE Sales Data for materials
RKPF Document Header- Reservation
T023 Mat. groups
T024 Purchasing Groups
T156 Movement Type
T157H Help Texts for Movement Types
MOFF Lists what views have not been created
A501 Plant/Material
EBAN Purchase Requisition
EBKN Purchase Requisition Account Assignment
EKAB Release Documentation
EKBE History per Purchasing Document
EKET Scheduling Agreement Schedule Lines
EKKN Account Assignment in Purchasing Document
EKKO Purchasing Document Header
EKPO Purchasing Document Item
IKPF Header- Physical Inventory Document
ISEG Physical Inventory Document Items
LFA1 Vendor Master (General section)
LFB1 Vendor Master (Company Code)
NRIV Number range intervals
RESB Reservation/dependent requirements
T161T Texts for Purchasing Document Types
Tcodes:
InfoRecord - ME11
Source List - ME01
RFQ to Vendor - ME41
Sheduling Agreement - ME31L
Contract - ME31K
Raising Quotation - ME47
Comparison of Price - ME49
Creation of PO - ME21N
Goods Receipt - MIGO
Invoice (Bill PAssing) - MIRO
Goods Issue - MB1A
Physical Inventory - MI01( Create doc)
MI04 (Enter Count)
MI07 (Post)
Visit the following thread:
New to Materials Management / Warehouse Management?
http://www.sapgenie.com/abap/tables_mm.htm
http://www.sap-img.com/sap-download/sap-tables.zip
http://www.allsaplinks.com/material_management.html
http://www.training-classes.com/course_hierarchy/courses/2614_SAP_R_3_MM_Invoice_Verification_-_Rel_4_x.php
http://www.sapfriends.com/sapstuff.html
check this out
MM flow
MM flow
MM flow
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PSMAT/PSMAT.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CAARCMM/CAARCMM.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/MYSAP/SR_MM.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOMDMM/LOMDMM.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCBMTWFMMM/BCBMTWFMMM.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/MMIVMVAL/MMIVMVAL.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/MMWMLVS/MMWMLVS.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/MMISVE/MMISVE.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PSMAT/PSMAT.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CAARCMM/CAARCMM.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/MYSAP/SR_MM.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/MYSAP/SR_MM.pdf
http://www.sap-basis-abap.com/mm/sap-mm-certification-samples.htm
http://www.sap-img.com/mm015.htm
http://sap.ittoolbox.com/documents/popular-q-and-a/sap-mm-interview-questions-3586
Regards,
Naveen.

Proforma invoice number is not in the document flow of the order.

Hi all,
I have a doubt , if i create an proforma invoice based on order, and after that i create delivery and billing, i cannot able to see the proforma invoice in the document flow of the particular order. pls guide me on this
Thanks all
Kumi

Hi,
Goto VTLA, and check the UPDATE DOCUMENT FLOW in the copy control
If it is already set , then directly from sales order you can find the Proforma invoice .
Goto the sales order in VA02 and enter into the overscreen and from there check the document flow ( F5), now you can see the Proforma invoices.
regards,
santosh

Confirmation of service in document flow

Dear all,
how can i hide the confirmation of service lines in the document flow.
Thanks

Try removing all authorisation to the relevant transactions in PFCG. It might stop display in the document flow also.

Confirmation of service in the document flow, where it comes from?

Dear all,
I found a confirmation of service after I picking and posting goods issue, from the document flow.
I just wondering, where it comes from? Or, how can I configure it on or off for display?
(This is a standard ERP system, should not involve in the CRM module)
Thanks,
Edited by: Peng Li on Apr 29, 2008 10:04 AM
Edited by: Peng Li on Apr 29, 2008 10:38 AM

Hi Peng,
This usually happens for inbound deliveries usually happens when a movement type is not found for the relevant item. Please check in the delivery item if a movement type is maintained.
Another possibility is that the material is a non-stock (service) material type for which goods movement are not relevant. Check the material type from the material master.
Regards
Nikhilesh

Sale order document flow-u0091Service Documentsu0092 is coming which should't aper

New Issue with Sales order document flow:
When linking from a sales order in document flow, we were reviewing why the description information varied. In looking at different values, we clicked on a new item within document flow that allows you to like to Service Documents. This is new in 6.0, or it was previously deactivated in 4.6C. If you link from a sales order to a service document, in ECC 6.0, you will get a short dump because the document flow is so great (viewing order #any in VA03 and use document flow and then select the service documents button as seen on the screen below
A Short dump will occur in program SAPLDOCUMENT_FLOW_ALV.
Here in ECC 6.0 is how it looks from sales order 9806:
Documents created from 2004 through 2007 are coming up as linked to this sales order and that is incorrect. There is some type of linkage issue. In the 4.6 C environments, the service documents link is not visible from document flow.
Can any body functional / technical Help on this urgent???

Hi Sanjay,
Go to the order VA03 --> Environment --> status overview. The exact status of the header and item can be found here. You may have chances to know why the status is being processed.
Also
Check whether you have checked 'document flow update' field at item level in copy control
Check your settings for completion rule in item category
If it is due to incorrect status message, run report SDVBUK00. That might fix the error. It is recommended to run this first in test mode.
Br, Sats.

Sale Order without a Document Flow

Hallo Everybody,
How can i copy a sale Order without a Document Flow ?
Thanks.

Hi,
Try to use the FM BAPI_SALESDOCUMENT_COPY
Rgds,
Bujjji

Sales Document Flow - Ref. Value not showing correct currency

I have a question about document flow currency in ECC6.0. We recented upgraded to ECC6.0 from 4.7 and noticed the changes to document flow. We are a US based company with sales offices in Europe. Our European offices are finding that that document flow in ECC6.0 shows in base currency of USD. Even thought the sales order was entered in EUR euros. Is this intended to be this way; since it is causing our offices in Europe some confusion? I searched forums an SAP notes and did not find any references. Has anyone see this in ECC6.0
Example Document Flow: Line Level (I do not see Ref Value at header level)
Note Sales Document was entered in EUR euros.
Document     Quantity     Unit     Ref. Value     Currency
Standard Order 0025082768 / 10     12 EA     5,207.54 USD
...Delivery 0080211725 / 10     12 EA
.....Picking request 20100423 / 10     12 EA
.....Handling unit 0001221687 / 1     12 EA
.....GD goods issue:delvy 4901261948 / 1     12 EA     1,690.08 GBP
...Invoice 0092006736 / 10                           12 EA     5,207.55 USD
Accounting document 0092006736     12 EA
If I highlight top line in document flow, I see the following in lower part of screen. This is the currency entered on the sales order.
0025082768     10          12     EA     3,847.80     EUR

Smile,
Thanks for pointing those configuration points out.   I checked my system and found the following. I do not see any change documents for the configuration points, so they have been set this way since our implemenation in 2005.
XD02 is customer master change, the customer on my order is set to EUR in sales in distribution tabs.
OX02 - Company Code
1000     Middleton     USD...ok
2000     London     GBP   ok
2100     Munich     EUR...ok
2210     Amsterdam     EUR...ok
4000     Hong Kong     USD...ok
I think OVX5 is not set correctly, should be same as OX02. If I change them, do I need to run an update in the system for old data? Or is it as simple as changing the value here? I'm hesitant to change this not knowing how this will affect the system. Do you know?
OVX5 - Sales Org
1000     Middleton     USD...ok
2000     London     USD   should be GBP
2100     Munich     USD   should be EUR
2210     Amsterdam     USD...should be EUR
4000     Hong Kong     USD...ok
Thanks,
Tony Romain

Delivery document flow show as a Archived,

Dear Experts,
My some of delivery document show in document flow as a archived, I want to know, Why delivery document archived,
I also want to not list of archived delivery document,
Can anybody give me t.code for list of delivery document archived,
Regards:
Happy

Hi,
Are these delivery actually archived by archiving job? Is there any subsequent document after the delivery?
Technically, if an delivery doesn't exist in LIKP table, but it exist in VBFA table, it will show "archived" in document flow.
As of why the delivery doesn't exist in LIKP, there could be two possibilities:
- it's deleted by archiving job.
- for unknown reason, it's gone.
To know why it's gone, it's necessary to reproduce the issue. If you can reproduce, please raise a message to SAP support.
What you need to do:
- If this delivery is really archived by your archivng job, you should also archive the preceding sales document.
- If this delivery is not supposed to be archived, but misisng, you need ot delete this dummy entry from VBFA table, and then recreate delivery.
To get a list of this kind of archived document, there is no standard report or transaction to do that. You need to write your own report to do that. As mentioned above, technically, if delivery exist in VBFA but doesn't exist in LIKP, it will be displayed like that. You may selecting VBFA and LIKP tables to get your list.
Regards,
Harry

Document flow of Inbound Delivery

Dear Gurus,
We have upgraded to support pack SAPKH60018 from SAPKH60010.
Earlier the process for goods receipt was followed as described below
1. Purchase order
2. Inbound Delivery
3. GR in to Blocked stock against Inbound Delivery (mvmt type 103)
3. Release GR blocked stock (mvmt type 105)
Now after upgrading the support pack when GR blocked stock is made against the Inbound Delivery system is not updating the Document number in the document flow and PGR button is not disabled though 103 mvmt type document is made through migo.
System is also not allowing to make the Release GR block stock through MIGO and prompting to use Inbound Delivery Dialog instead.
Request for immediate assitance in regard to this issue.
Regards
Danish Alam.

With the support pack in case if material is serialized for such plant you can post goods receipt only in VL32N which would happen only during 105 mvt type and you cannot post goods receipt using MIGO.

In delivery document flow the shipment should be added

Hi Gurus,
when the delivery is created, users have to affect the delivery to the right shipment document:
They have to :
1.Check the sales order document number form the document flow of the delivery
2.check in the order the shipment document number
3.Enter in the shipment document number (VT02N) and affect the delivery.
If the copy cannot be processed (sales order locked for example), user is not informed and data are incoherent between order an shipment document.
plz help me to find a solution to solve this problem
thanks in advanced
Edited by: snehal patil on Nov 21, 2008 9:55 AM

Welcome to the forum.
First of all, this should have been posted in sales forum as this is not the right place to post. Coming to the query, if I understood your requirement correctly, you want to restrict the number of line items in delivery. If so, check this thread
[Re: How can I limit the item number of the delivery?|How can I limit the item number of the delivery?]
If my understanding is wrong, please elaborate and post the same in sales forum.
thanks
G. Lakshmipathi

Document flow is not updated for Scheduling agreement

Hi Gurus,
Can you please advise on the below issue..
Some deliveries created with reference of schedule agreement are not displayed in scheduling agreement in forecast delivery schedule under delivery tab and as well as not updated in document flow for VBFA table.
There are two ways to create delivery with reference of Scheduling agreement , 1) Create Delivery order (Order Type : TAM) with reference of SA, then delivery for TAM order.
2) we can add the line item in existing TAM order with reference of SA .
Advance thanks for your valid points.
Best regards,
Venkat.

Hi Ram,
Thanks for the reply, there is no issue in copy control settings.
Best regards,
Venkat.

BAP_SALES_ORDER_CREATE_WITH_REFERENCE - Document flow

Hi, I have a problem with the bapi for create sales order with reference, When the line items be created, the Update indicator for flow table(VBAP-UPFLU) be created whit the value 'X'(Create document flow records).
If the sales order is manual, the value of the Indicator for flow table is '2'(Create document flow records except for delivery/goods issue/billing documents), acording to the configuration, but, the bapi assing 'X' for the same reference document.
Then, when change positions of outbound delivery or billing document the performance of the system is afected because the "Document number of the reference document" have to many reference, and read all the flow document of the contrat.
I think that maibe need indicate someting aditional to the bapi at position level.
Thanks a lot for your help.
Regards,
Fernando Jiménez.
Edited by: Julius Bussche on Jul 24, 2009 9:54 PM

http://www.sap-img.com/abap/bapi-salesorder-createfromdat2.htm

Sales order document flow error

we do credit memo for one sales order, in the sales order document flow, the credit memo accounting document's status is not cleared. how can we changed it to be cleared?

Hi,
Clearing will be done by finance after the payment is given to the customer. This clearing is done by transaction F-22.
VKM3 is used for releasing document blocked for credit management and not for clearing the accounting document.
Regards
Karan

HU Identification in document flow

Similar Messages

Maybe you are looking for