Open complete book in pdf

Is there a way, we can open directly complete book in pdf via related content link.
Thanks in advance!!
Regards,
Rahul

Hi Rahul
You can use related content to link to a book but it runs in html.
I know that you can also use related content to link to a PDF file that you have imported into the workspace by pasting the smartcut into the related content custom link. I am not sure how well you could automate the production of PDF books to a network folder and then the import of the files into workspace though, unfortunately if you run a book as a snapshot it is always in html format.
This is all on version 9.3.1, in version 11 I believe that you can add a file as an annotation to a financial report but I don't think that you can bulk upload them so I guess it woudl depend upon how many of these links you needed to create.
Hope this helps
Stuart
www.analitica.co.uk

Similar Messages

  • Complete Book in PDF is not working for one report

    <p>It's strange.  All of the other books run fine.  If wecreate another copy of this troublesome book, still have the sameproblem.  All of the reports in the book can be readindividually.  Is there a limitation to the number of reportsin a book to Complete Book in PDF?</p><p> </p><p>Thanks</p>

    Its working now. We just kept trying to reinstall the tools and restarting indesign. On the 4th time the buttons started working. I can't explain why it finally worked, just that it is working now.

  • Hyperion Reporting Studio - data not shown in "Complete book to PDF"

    Hello All,
    We are using Version 11.1.2 with Planning and Essbase. We have created a book with 2 reports in it. When I run a report in the book to HTML I see data displayed in my statistical accounts but when I run the complete book to PDF the stat accounts are displayed as zeros. I can also retrieve the data using the Excel add-in. There are no error messages when running the book.
    Has anyone seen this previously?

    Hello All,
    We are using Version 11.1.2 with Planning and Essbase. We have created a book with 2 reports in it. When I run a report in the book to HTML I see data displayed in my statistical accounts but when I run the complete book to PDF the stat accounts are displayed as zeros. I can also retrieve the data using the Excel add-in. There are no error messages when running the book.
    Has anyone seen this previously?

  • PDF Generation Error Message:Couldn't open File while generating PDF from a Frame (7.2 Version) book

    Hi,
    I'm trying to convert a book into PDF and I get the error message Couldn't open a file (... <filename>.fm) and the unavailable Fonts dialog box also appears. The tricky thing is I've converted the same book into PDF just a couple of days ago. Now when I tried to do it again, I get the above mentioned error message. I tried unselecting the File > Prefrences > General > Remember Missing Fonts checkbox too. However, it didn't help in generating the PDF. I will be thankful if anyone suggests a suitable workaround for this issue. Thanks in advance.

    Usually, deselecting Remember missing fonts works.
    The missing fonts message displays when you or FrameMaker opens the file. The workaround is to open all the files in the book, or at least those with the "missing" font, clearing the message for each file. Now print the book to PDF, while keeping the files open. This usually works because you have already cleared any missing fonts messages.

  • I received a replacement iPad. On my original iPad I had dozens of books and PDF's. I completely backed up my original iPad. The categories of my iBook files transferred but NOT the actual PDF and Books. Please help.

    I received a replacement iPad. On my original iPad I had dozens of books and PDF's. I completely backed up my original iPad. The categories of my iBook files transferred but NOT the actual PDF and Books. Please help.

    Are the PDFs and ibooks on your computer's iTunes ? If so then you should be able to re-sync them, if not then you can re-download ibooks for free as long as they are still available in the store and you use the same iTunes account as you originally used to buy them : http://support.apple.com/kb/HT2519 . The backup doesn't contain the contents of the ibooks app, so for them to be restored to the device they needed to be in your iTunes library.

  • The problem is that I select as a pdf document does not open completely but leaves the mail. Also I can not open more even Ibook other documents already saved

    the problem is that I select as a pdf document does not open completely but leaves the mail. Also I can not open more even Ibook other documents already saved

    http://www.microsoft.com/mac/support
    http://answers.microsoft.com/en-us/mac/forum/macword?auth=1
    http://answers.microsoft.com/en-us/mac/forum/macoffice2011-macword/microsoft-wor d-for-mac-2011-will-not-open-error/ecc42616-6f49-40bb-b8f5-e21c711ea359

  • I can open iBooks App but it does not have any books or PDF's ... I tried bringing them in but no luck!  Any solutions??

    I can open iBooks App but it does not have any books or PDF's ... I tried bringing them in but no luck!  Any solutions??
    It's taken off both iPhone and the new iPad

    You can insert the PDF that you want to have on iBooks trough iTunes using the library section "books", or simply drag and drop the PDF to iTunes and sync your iPhone, iPad.
    You can also open a PDF on Safari and tap on open in iBooks at the top of screen.

  • Cannot save FrameMaker 7 book as PDF, when opened using FrameMaker 8

    I have a template created using FM 7. I have converted those templates into FM8 and then created a book. When I try to save the book as PDF, it gives the following error (in .txt format):
    ===========================================================================
    %%[ ProductName: Distiller ]%%
    %%[Page: 1]%%
    %%[Page: 2]%%
    %%[ Error: undefined; OffendingCommand: pdfmark; ErrorInfo: Rect ]%%
    Stack:
    /ANN
    /Link
    /Subtype
    /G4.282834
    /D
    /GoToR
    /S
    /Action
    /Type
    -dict-
    /Action
    [0 0 0]
    /Border
    [1200 5218 9000 4955]
    /Rect
    -mark-
    %%[ Flushing: rest of job (to end-of-file) will be ignored ]%%
    %%[ Warning: PostScript error. No PDF file produced. ] %%
    ===========================================================================
    When I converted these FM8 files into FM7 and generated a book, I was able to save as PDF. I am able to save the individual FM8 files (using FM7 template) into PDF files.
    Why am I not able to save the book as PDF, when I use FM7 template in FM8?

    This problem was fixed in FM8.0p266. You are probably using the original release of FM8.0 (FM8.0p236).
    Please update your version (Help > Updates), then try saving as PDF again.
    Shlomo Perets
    MicroType * http://www.microtype.com
    FrameMaker training & consulting * FM-to-Acrobat TimeSavers
    "Improve Your FrameMaker Skills" live web-based training sessions

  • IPhoto crashes when opening partially completed book

    Using iPhoto 5.0.4 with Tiger 10.4.3 OS on a 1 GHz PowerPC G4 laptop with 768 MB of memory.
    I created a book in iPhoto using the Yearbook Theme. I have 266 pictures either in the book or waiting to be placed. At least 230 pictures are on pages. There are 38 pages in use. At this point when I open the book, it opens to the pages selection and I can move off the current page by one or two pages before iPhoto freezes up and then quits. I am unable to view pictures at all. Fixes I have tried are repairing permissions, dpi settings, and cleaning caches from this discussion board.
    Any additional help would be greatly appreciated.
    Thanks in advance.
    PB G4   Mac OS X (10.4.3)   768 MB Ram

    I tried Lori's suggesting about opening each photo in iPhoto. I was able to get through 6 - 10 photos before the program crashed again. After trying to open and view each photo separately and crashing numerous times, I decided to try to make the book on a different machine.
    I transfered the iPhoto library to my iMac G5. I was able to work on the project for about a half hour before the crashing began on that computer.
    I removed all photos from my iPhoto Library (over 6000) and just imported those I needed for the book. Previously, I had used the Yearbook theme. This time I tried the Picturebook theme. I was working with 290 photos. I filled the standard 20 pages then started adding pages to the book. (My book needs to be 40 pages). At this point I again started to crash in iPhoto.
    My images are standard images from digital cameras and scanned images. Scanned images are either 150 dpi or 2400 dpi. Is the size of my larger scanned images the issue? Is there a size limitation on the images in the book? Since I have used two different computers and have gotten the same problem, the common factor seems to be the photos themselves. All of the images I have set aside for the book will open in iPhoto, so I don't believe I have a corrupt photo.
    Any other ideas or thoughts you have for me?
    Thanks again for any help you can give.

  • I imported a COMPLETED book project into Aperture 3, only to discover that  the resolution of all the photos has been reduced to totally unacceptable levels

    I imported a COMPLETED book project into Aperture 3, only to discover that  the resolution of all the photos has been reduced to totally unacceptable levels.  Any easy solution?
    Steps:
    1. I finished an Aperture 2 (Two) book project and tried to submit it to Apple for printing. At that point I learned (belatedly, obviously) that Apple no longer accepts books from Aperture 2. I don't know how I would have known to even ask if Aperture 2 had been sunsetted as far as book projects go.
    2. So I tried to download Aperture 3 ($79.99), only to be told that I couldn't download Aperture 3.5.1 because I was still running OSX 10.8.x. So I read current reviews for OSX 10.9.x, and ...
    3. Downloaded and installed the current operating system (about a 3-hours process for me).  OSX 10.9.2, here we are!
    4. Then I returned to the Apple Store, found, and purchased Aperture 3.  [For safety's sake, it would sure be nice to have a .dmg file I could copy and file away.  I lost a perfectly legal and good copy of Adobe's Photoshop Elements 3 years ago because I wasn't smart enough to make a safety copy, and when my iMac crashed (fried electronic components), I was left with a copy of the software that wouldn't run, and couldn't be verified as legit.]
    5. When Aperture 3 finished installing, I found and imported my COMPLETED Aperture 2 book project, which import seemed to proceed nominally -- the right number of pages, the right content on those pages, that sort of thing -- until I started looking more carefully at the pictures themselves.  All of them, about 300 of them, have been imported into an Aperture 3 book project in such a reduced resolution that they are fuzzy at the size the book will be printed.  Screen-capture of just one example (at 100% viewer setting):
    I don't know what to do at this point to correct the problem, short of going through the entire book project, copy the custom captions (since those go away when you "delete" photo content), delete the photo, re-insert the photo, and paste back the custom caption.  Lather, rinse, repeat - ~300 times!  An estimated 2-3 hours of additional work.
    Or does anyone in this community know either (1) that I did something wrong in the Aperture 2-to-Aperture 3 import (I don't recall being offered any options or choices in the process); or (2) that there is a wholesale one-step solution to my problem?
    BTW, I tried to edit my "Product" info, but OSX 10.9.x is not in the pick list.  I am running OSX 10.9.2
    <Re-Titled By Host>

    Frank, thanks for your note.  I wrote "COMPLETED" because I had gone to a lot of effort to get the content of the book precisely as I wanted it. I would fully expect to see my level of effort and care matched by functional competence in Aperture 3 to render the book the way I created it.  Too much to ask?
    And yes, I upgraded the Aperture 2 Library first.  [Not ALL my tens of 000s of pix, because I use Lightroom selectively for photo editing. But Yes to the Aperture 2 Library.]  That step took a number of minutes, but seemed to work fine (no error messages of any kind).
    Then I opened the existing book project in Aperture 3, which followed some "magic-box" process that took a minute or so.  As I said, when that step was done, by all appearances the book was ready to submit for printing - until I examined the photos a little more closely.  You did see the blurry example I included, didn't you? That is what each and every photo looks like.
    Text-box content appears to have been rendered pertectly, for the record (including captions).
    So, ... is this result something you have heard of before?  Do you know of a one-step solution?  Or am I looking at an extended picture-by-picture fix?

  • Save as PDF or Save Book As (pdf format) Causes Frame 8 to try to quit after creating PDF

    I have Framemaker 8p273 and Acrobat distiller 8.1.3.
    When trying to creating PDFs from books using either Save as PDF OR Save Books As (PDF) file, the PDF creates FINE but the program then attempts to quit by throwing up weird dialog boxes.
    Steps to reproduce bug:
    1.Open any book
    2.Use File-->Save as PDF or File-->Save Books As and then choose type PDF
    3.PDF created fine - no errors reported in Distiller window
    4. Framemaker then throws up a small dialog box that says "cannot quit." You cannot close this box, only click OKAY.
    The only other issue that arises might be a "cannot print some graphics - will print as gray boxes"
    5. Clicking okay brings up sequence of 5 total of the same boxes (the book file has 7 files in it including the TOC).
    6. After last of 5 "cannot quit" boxes, a new Framemaker one appears, that says "Unsaved Changes in file (book name) Save before closing?" Options are Yes, No and Cancel. Yes saves file and quite Frame. No quits Frame. Cancel leaves file open.
    I have reproduced this error multiple times with different books, using both the Save as PDF and Save Book As (PDF) commands.
    File--Print Book using Acrobat printer works fine (making sure to enable the acrobat setting so bookmarks are properly generated).
    Just frustrated that the first two options cause such an annoying error. Reported as a bug.

    Jaclyn,
    I've seen this happen when an API client attempts to close a document that doesn't exist, which defaults to closing the FrameMaker session, but the session cannot close because it's in the middle of some operation. It's normally the result of sloppy code. Do you have any third-party API plugin software running? For that matter, does anyone know if the "Save as PDF" uses an API client? If so, might be a bug in that software, although it seems that there must be something unique going on here to invoke this behavior in your case.
    Russ

  • ADE Crashes opening library book from OneClickDigital (Mac OSX 10.9.5)

    I'm new to ADE.  Our local library started offering eBooks this past week via OneClickDigital.
    eReader is ADE.  I loaded 4.0 on my Mac and downloaded an eBook.  ADE crashes every time I download a book or attempt to open the book.
    After the crash, the book appears to be downloaded - I can even open the Mac Finder and see the pdf on my hard drive in Documents->Digital Editions.
    I've tried various ways to open the book - double clicking, right-clicking the book icon and selecting read and selecting the book and using the File->Read menu.  All of them result in a crash.
    Any suggestions?  I've seen recommendations to load earlier versions of ADE, but I don't know a legitimate source for that.
    Screenshot

    Try posting in the MacBook Pro laptop forum. his is the Mac Pro desktop forum.

  • Is it possible to open a book in Adobe Reader instead of Adobe Digital Editions?

    Is it possible to open a book in Adobe Reader instead of Adobe Digital Editions?

    Thanks a lot , I'am a complete newbie in this , I started by downloading the sdk, I unzipped it ,thought I'd try a sample named Basic Plugin, opened the solution file from the samples folder,, I built the solution,build succeeded but I'am not able to find the api file to copy it to the adobe acrobat plugin folder.Is this the right way to do this?

  • Export Book to PDF shows bad colours

    Hi all,
    I have created a book in Aperture, starting from a set of RAW/TIFF pictures.
    If I preview/export the book in PDF, it looks VERY BAD in the dark areas (posterized to very few RGB tones).
    The problem appears ONLY when I use the "Save as PDF" option from the "Print Book" menu, or I make a preview before placing the order.
    What I tested so far:
    - If I export from Aperture each single image to PDF (or tiff/jpg), the problem does not occur!
    - The images look perfect also if I open them from other apps, like photoshop/iPhoto/preview.
    - I created a test book with the images from iPhoto and there the exported PDF book looks fine.
    - I installed Aperture on a different computer (a mac mini recently reinstalled), and the problem is still there.
    Please consider that:
    1. my monitor (iMac 24") is hardware calibrated
    2. the source pictures are in RAW (no color profile on them) and (just a couple) in TIFF (16bit, Adobe RGB). I also tried reimporting in the album jpg converted versions, with no better results.
    3. OS and Aperture are updated to the latest versions.
    I would exclude a problem of the source images (because Aperture/iPhoto can export them properly to PDF)
    It looks to me like a problem of the PDF rendering engine when used for exporting Aperture books.
    Anyone had ever experienced something similar?
    Any advice?
    If you want to check with your eyes, I uploaded a few screenshots here:
    http://www.dropbox.com/gallery/5695776/1/Test?h=0a0f16
    Thanks in advance!
    Marco
    ps. I've posted this message also on the other Aperture's discussion group, please apologize for the repetition.

    It seems the same my problem:
    look here: https://discussions.apple.com/thread/4760913

  • Can I select layers when exporting an Indesign book to PDF ?

    Hello,
    I've created a book consisting of separate Indesign files, each containing different languages. Each language is in a separate layer.
    I then created 4 different book which each contain about 5 files. This makes that I have 4 books with all languages spread over different layers. When I export the book to PDF I would like to be able to select the language layer so I can create a PDF file per language. I can open each file to hide all language layers except the one I want to export, but that is a time consuming work.
    I am wandering if there is a quicker way to export to PDF each language without having to open and resave each separate Indesign file.
    Thanks for all the feedback.
    Tom

    Why do you need to omit the French layer for a German book?
    Just export with all the layers.
    Then, in Acrobat, turn off the French (Italian, Spanish, English?) and leave German exposed.
    Save as "Meine tollen deutschen Buchmarkt.pdf".
    Then, turn off all the layers except Frenh, and save it as "Mon excellent livre français.pdf"
    I promise you that no one outside of a very few people will ever know that there are layers with other languages hidden. Hardly anyone who uses Acrobat knows there are layers at all. (Except the brilliant people on this forum)

Maybe you are looking for