Hyperlink does not forward

I am trying to forward an email I recieved with the hyperlink in tact. The forwarded email changes the hyperlink to the url. Any suggestions? Thanks, Susie

AND I have downloaded the latest version of Acrobat Reader X, and when I select a live hyperlink I get a notice if I want to connect to the linked site, and when I select yes I am still not directed anywhere... it's a dead-end.
It seems like something has changed within InDesign CS4 within the last two months, now there seems to be a hyperlinkage inability for PDF's.
It worked fine for me before this time just using basic Preview... and now nothing.
And I need this PDF by the end of day

Similar Messages

IPhone does not forward attachments with emails

My iPhone does not forward attachments with emails.

Make sure you open the email and fully download the attachments before trying to forward them. Large attachments are often only partially downloaded unless you tap the option to fully download the.

FPM Message Manager message's HyperLink does not work in Table

Hi FPM experts,
I use FPM in my application and I want to use FPM Message Manager with hyperlink pointing to cells with errors in a table with report_bapiret2_message. The hyperlink does work when pointing on stand alone input field, but it does not work when pointing on a input field in a table.
Here is a piece of my code. What's wrong?
data is_message type bapiret2.
is_message-type = 'E'.
is_message-id = 'TEST'.
is_message-number = '1'.
wd_comp_controller->mr_fpm_message_manager->
   report_bapiret2_message( is_bapiret2 = is_message
                                         io_component = wd_comp_controller
                                         io_element = lo_el_table_elements " point on the element in my context
                                         iv_attribute_name = 'VALUE' ). " Name of my attribute in context
Thanks
Davy
Edited by: Davy Veilleux on Jan 4, 2009 4:19 PM

Any answers to this question?
I am facing the same issue. Using FPM Message Manager with the io_element and iv_attribute parameters pointing to an element in an context node having cardinality = "0...n" does not show the hyper link.
Any Help is Appreciated.

Dynamic hyperlink does not seem to work

Hi,
It looks like this same issue came up before in <
Dynamic hyperlink in Word 2003 but it does not appear that anyone ever responded.
My customer has created a dynamic hyperlink using {VM_URL} but when the template saves if you mouse over the hyperlink, you see a reference to the current location example:
file:///E:\temp\%7bVM_URL%7d
The xml data template looks like the following:
<?xml version="1.0" encoding="UTF-8"?>
<ContractDetails>
<kid>238335</kid><usr>[email protected]</usr>
<LIST_HDR>
<HDR>
<USER_PWD>4</USER_PWD>
<USER_SSO>[email protected]</USER_SSO>
<VM_URL>http://ora-apps-phnx-1.vmware.com:8000/oa_servlets/oracle.apps.fnd.sso.AppsLogin?requestUrl=APPSHOMEPAGE&cancelUrl=http%3A%2F%2Fora-apps-phnx-1.vmware.com%3A8000%2Foa_servlets%2Foracle.apps.fnd.sso.AppsLogin</VM_URL>
The hyperlink in the pdf then becomes the original path to the document:
E:\tmp
I have found a couple of issues in WebIV, one was a position loop problem and another was an absolute xpath issue, but this does not seem to fit either. I played a little with the link and url setting, but no luck.
Tried in 5.6.3 and Word 2k2
Any help would be appreciated.
Thank You,
Dale

I am facing the same problem,
Please can anyone give pointers to this?
Regards,
Amit Deshpande

ME3600 does not forward frames out one interface in service instance

Hi,
I have an issue with ME3600 running 15.3(1)S. I have a BDI used for CPE
management.
cisco ME-3600X-24FS-M
Cisco IOS Software, ME360x Software (ME360x-UNIVERSALK9-M), Version
15.3(1)S, RELEASE SOFTWARE (fc1)
This is the BDI and VRF configuration:
interface Vlan1620
ip vrf forwarding 65000:1620
ip address 10.232.28.1 255.255.252.0
no ip redirects
ip vrf 65000:1620
rd 65000:1620
route-target export 65000:1620
route-target import 65000:1620
address-family ipv4 vrf 65000:1620
redistribute connected
The MPLS part is working fine, no issues there. There is also a DHCP
pool handing out IPs to the CPEs.
ip dhcp pool 65000:1620
vrf 65000:1620
network 10.232.28.0 255.255.252.0
domain-name xyz
default-router 10.232.28.1
option 66 ascii 10.232.28.1
dns-server 8.8.8.8
lease 0 0 30
This also works fine and I have verified that CPE has both IP and GW.
Then for the service instance configuration:
interface GigabitEthernet0/5
switchport trunk allowed vlan none
switchport mode trunk
service instance 1620 ethernet
encapsulation dot1q 1620
rewrite ingress tag pop 1 symmetric
bridge-domain 1620
interface GigabitEthernet0/11
switchport trunk allowed vlan none
switchport mode trunk
service instance 1620 ethernet
encapsulation dot1q 1620
rewrite ingress tag pop 1 symmetric
bridge-domain 1620
Traffic to CPEs behind Gi0/11 works:
sh ip arp vrf 65000:1620 vlan 1620 | i 29.26
Internet 10.232.29.26 0 0022.07f3.3450 ARPA Vlan1620
show mac-address-table address 0022.07f3.3450
Mac Address Table
Vlan Mac Address Type Ports
1620 0022.07f3.3450 DYNAMIC Gi0/11+Efp1620
Total Mac Addresses for this criterion: 1
Pinging 10.232.29.26 with 32 bytes of data:
Reply from 10.232.29.26: bytes=32 time=33ms TTL=61
Reply from 10.232.29.26: bytes=32 time=32ms TTL=61
Reply from 10.232.29.26: bytes=32 time=34ms TTL=61
Reply from 10.232.29.26: bytes=32 time=32ms TTL=61
Traffic to CPEs behind Gi0/5 does not work.
sh ip arp vrf 65000:1620 vlan 1620 | i 28.190
Internet 10.232.28.190 2 0022.07f2.76a6 ARPA Vlan1620
show mac-address-table address 0022.07f2.76a6
Mac Address Table
Vlan Mac Address Type Ports
1620 0022.07f2.76a6 DYNAMIC Gi0/5+Efp1620
Total Mac Addresses for this criterion: 1
Pinging 10.232.28.190 with 32 bytes of data:
Request timed out.
Request timed out.
Request timed out.
Request timed out.
This is also confirmed by looking at counters. There seems to be no
egress traffic on Gi0/5.
Service Instance 1620, Interface GigabitEthernet0/11
Pkts In Bytes In Pkts Out Bytes Out
31717 2955368 4569808 1709207624
Service Instance 1620, Interface GigabitEthernet0/5
Pkts In Bytes In Pkts Out Bytes Out
4850878 367975447 0 0
It does work to ping locally from the 3600 though:
ping vrf 65000:1620 10.232.28.190
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 10.232.28.190, timeout is 2 seconds:
Success rate is 100 percent (5/5), round-trip min/avg/max = 1/2/4 ms
I'm not sure how to troubleshoot it further. I've also tried setting up
ERSPAN sessions for RX traffic on Gi0/5 but I don't get anything in
unless I ping 28.1 which is the IP of the interface on the 3600.
Any clues?
Daniel Dib
CCIE #37149
Please rate helpful posts.

It could not have been caused by a virus, since there are no viruses for Mac OS X. I would guess it was a typo when you first setup the account, and when you set it up again, a user may have gone to Preferences and selected the Outgoing mail server drop down menu and inadvertently selected the typo'd server entry.
Mulder

Hyperlink does not open pdf file

I am using reader 9.3 in windows 7 on a new netbook. After installing reader, my documents open just fine
except when I try and use a hyperlink in a word document to open a pdf, I keep getting a NO PROGRAM IS REGISTERED message. I have tried the open with selection and made sure the ALL FILES OF THIS TYPE is linked or checked, and the same thing continues to happen. I have done the repair and reinstall. Still does not work with a hyperlink.
What is going on?
John Simms

Sounds like a "file association" problem, have you tried different browsers? Also, when you installed the application were there any checkboxes for like firefox (or other browsers) integration? What browser do you use now? Tr reinstalling your internet browser and it will probably work for you.
Best regards
Leif

Online number does not forward or go to voicemail

I have an online number which is forwarded to an Australian Mobile. It also set up to go to voicemail if not answered. Neither of these functions work as it just rings out when dialed. Where is it ringing? How do I get the features to work? Why am I paying for something that does not work? Will I get a refund for time elapsed to date?

Do you happen to have Airplane mode enabled?

Repeater does not forward data packets

Hello all!
I have following setup:
A root access-point ap1, model AIR-AP1231G-E-K9 with IOS 12.3(8)JEE, is configured with one SSID on VLAN 1 (native) and working fine.
Now I would like to add a 2nd access-point ap2 of the same model with the same IOS version as a repeater to extend the WLAN coverage of the overall network.
I managed to configure the 2nd access-point successfully as repeater (same SSID settings, infrastructure ssid set, parent 1 mac-address set) and it associates successfully with the main root access-point.
Now I observe following effect: As soon I leave the coverage area of the first AP and enter the area of the repeater, the client (iPhone, Laptop or any other WLAN device) associates successfully to the repeater (confirmed with "show dot11 ass" and due to the log entries of the repeater) but the data packets are not forwarded to the main access-point. There is no IP connectivity to the root AP or internet anymore.
Another example which might lead to the solution is following observation:
I have my laptop connected to the wireless network with two console sessions open. In one I run a ping to the first AP, ap1 (10.200.3.5) and in the other console I run a ping to the repeater ap2 (10.200.3.6). Both access-points reply.
Now if I enter the coverage area of the repeater, my laptop gets associated to it and the ping to the first AP ap1 times out.
Again, it looks like that the repeater denies to forward traffic to the main root AP.
I have no clue why this happens, nor are there any log messages available which might explain this issue.
I hope someone can help me finding the problem.
The configuration of the working root access-point ap1 as the repeater ap2 is attached.
Thank you!
Best regards,
Bernhard

You have configured sub-interface on radio interface & not in ethernet interface at Root AP end. change the config like below & see.
dot11 ssid Internet Las 3 Marias
   vlan 1
   authentication open
   authentication key-management wpa
   guest-mode
   infrastructure-ssid
   wpa-psk ascii 7 xxxx
interface Dot11Radio0
no ip address
no ip route-cache
encryption vlan 1 mode ciphers aes-ccm tkip
encryption mode ciphers aes-ccm tkip
bridge-group 1
ssid Internet Las 3 Marias
speed basic-1.0 2.0 5.5 6.0 9.0 11.0 12.0 18.0 24.0 36.0 48.0 54.0
channel 2412
station-role root access-point
world-mode dot11d country-code US both
interface Dot11Radio0.1
encapsulation dot1Q 1 native
bridge-group 1
Here is a reference post for a similar setup (vlan 110 is native vlan though)
http://mrncciew.com/2013/01/20/autonomous-ap-repeater/
Also suggest to configure WPA2/AES (instead of WPA/TKIP), if it is supporting in this AP model, command syntax is like below.
dot11 ssid xx
authentication key-management wpa version 2
int d0
encryption mode ciphers aes-ccm
Let us know how it goes
HTH
Rasika
**** Pls rate all useful responses ****

When I reply or forward a message with an attachment the attachment does not forward with the email

Someone sent a message with an attachment. I replied but the attachment doesn't show in my reply. I want to be sure the attachment goes with the reply.

Unfortunately Micrisift have difficulty with understanding standards so they make mail programs that do not correctly encode attachments. Thunderbird can display them, but not forward defective mime encoding. This is a conscious decision of the developers, they are not spreading what they see as defective mail.
Forward such mail as an attachment. It is on the message menu (Alt + M) on on the drop down beside the forward button.

Hyperlink does not open new window on the second page

Hi,
I have a report which shows list of products. Every product id has hyperlink to show details. When I click on any hyperlink on the first page, it opens in new window and looks good. But the hyperlink from the second page opens in the same window and overwrites main report.
I am not sh=ure what is happening?
Does anybody come across such problem and have the solution?
Thank you.
Julia

Hi Julia,
This is the way to resolve the issue in BO XI 3.1 SP3 :
Open the existing Crystal Report in the Crystal Reports Designer
Edit the formula which was created in the above step and replace sWindow=New with "target=_blank" as follows:
a href="http://<servername>:<port>/OpenDocument/opendoc/openDocument.jsp?sDocName=Drilldown" target="_blank"> MyTest </a>
Save this formula and save the report as well
Log onto the BusinessObjects Server box and modify the web.xml file located in C:\Program Files\Business Objects\Tomcat55\webapps\CrystalReports\WEB-INF by adding the following code in it:
<context-param>
　　　　　　<param-name>
　　　　　　　　　　　　　　　 crystal_encode_html_for_single_line_field_objects
　　　　　　</param-name>
　　　　　<param-value>no</param-value>
</context-param>
5. Save this file
6. Restart the application server (Tomcat)
7. Now, when you open the report in InfoView and click on the hyperlink, the target report should open in a new window.
Regards,
Anchal

MSA 50SP6: clicking on hyperlink does not open outlook mail system

Hello forum,
I've installed msa 50sp6 with a lot of hotfixes, but on some msa clients
I've the problem , that I cannot open a new email by clicking on a contact
person email hyperlink. Nothing happens, I just get into the Inbox/Email Assignments. But no new email message is created.
Does anybody know why ?
How can I suppress creating a new entry in assigment list ? What is this for ?
Thanks
Gerd

Hi Gerd,
There is no note relating to the issue for 5.0 Sp06. I thought the solution in the notes mentioned earlier in my reply may help you resolve the issue. Though the notes are particularly for a release, the solution may sometimes hold good for other releases too.
Regards,
Ramesh.

Forwarding an (ipad) email does not forward attachments correctly

Dear users,
I would like to have your opinion on the following issue.
I often receive an email sent from iPad, which I am not able to forward correctly. Specifically, some attachments are ignored in the compose window. My friend uses Skype to make screenshosts, then selects them and send them to me. I cannot influence the way they are working and I am glad they have gone so far with technologies...
The received message has 2*N attachments, where N is the number of pictures attached. There is also N text attachments, which I am able to open and read -- they are comments to the pictures. When I forward the email, only the text attachments are attached and sent. They cannot be opened on the recipient side and are of lesser value (they are commenting the pictures). All of the attachments are named in the form "ATT00#.txt" "obrazek #.png", where the cross-hash is a sequential number.
One of such emails looks as follows:
When forwarded, the message (the edit window) receives only the text attachements:
The same message on my GMail account looks as follows. Here, the text attachments are inlined into the email.
Does anybody know, how to tell BB10 to re-attach all the attachments form the original email?
Workaround: Currectly, I forward these emails, when I am in on the GMail webpage. In urgent cases, I download the PNG attachments and reattach them manually in the compose window.
Cheers,

Thanks for confirming the issue dear Polocoste. It is not solved up to now. And I have no new information either. Cheers

Acrobat XI hyperlink does not work when printing Office Word 2010 to PDF

Hello,
I have word documents where I have added http hyperlinks. The links function fine in the Word doc. When I print the document to an Adobe PDF using Acrobat XI the resulting PDF file has the blue text which indicates it is a hyperlink but there is no link whe I hover over the text. How do print Office 2010 documents to Adobe PDF and preserve the hyperlinks?

The trick is not to print it but to use the PDF Maker plugin, if it's
available, to convert the file to a PDF while maintaining links and other
meta-objects (bookmarks, destinations, etc.).
On Tue, Mar 31, 2015 at 8:11 PM, davids86393363 <[email protected]>

Help please-Text hyperlink does not change color on Safari?

I have set up certain links on my page to change color once they have been scrolled over or clicked. After publishing my site this feature is not active on Safari, but works on Firefox. I have visited other sites that have been made on iWeb and seen that this feature is active on Safari, so I know it is possible to create this feature. If there are any suggestions or tricks that would help me I would greatly appreciate it.

I am having the exact same problem. I cross-posted your submission to jaycheryl's thread after confirming, with my pages, your bottom-line observation that Firefox displays the code correctly.
The only difference in our situations is that I didn't edit any colors. I'm just using one of iWeb's stock themes. Some of my hyperlinks are OK in Safari and all of the iWeb created hyperlinks, e.g. the <next> and <previous> blog navigation buttons are OK even on new pages.
p.s. I don't see, or can't link to the "Helpful" answers available: 2 . "Solved" answers available: 1 displayed at the top of the thread?

WRT54GS v6 1.52.5 firm DMZ does not forward

I just flashed the router with the new firmware version. I still can not bypass the firewall to pass packets to my server. I just want to use a pc for a ventrilo server. PC is xp. No firewall, xp firewall is off. Static IP. DMZ is enabled to the IP. It forwards *nothing*. I watched Wireshark on the PC, no broadcast traffic or anything else ftm. I tried port forwarding for 3784 (ven server port) no joy. I have disabled and enabled uPNP. All off: Block Anonymous Internet Requests Filter Multicast Filter Internet NAT Redirection Everything works besides the router passing external requests to the designated IP address. Any advice? Would chatting with a tech help? I'm pretty much out of ideas.

I got it. The hard boot did not work and the new firmware did not work. I reset the router back to it's original config (reset for 10 sec), reboot, made the single change of turning off uPNP, upgraded the new firmware again, then made manual configurations. That made the dmz option forward all traffic. I then disabled dmz and config'ed the port forward parameters. Thanks for your help guys.

Hyperlink does not forward

Similar Messages

Maybe you are looking for